Used Oil Extractor for sale (7,275)

Condition: good (used), Oil storage tank with level gauge and ancillaries. 3500 litres. Has been used with a continuous fryer to store the oil when it is emptied. Model VTC3500 is the same as OLT3500. Dkodpen Upivjfx Ahgop

Condition: good (used), Direct from closed food factory. Dimensions to follow. Dkjdstp Nz Espfx Ahgjp

Condition: excellent (used), Dust extractor unit to run with preduster. Almost as new. Dsdpfx Aoumm Npohgokp

Condition: excellent (used), GEA OptiAir dust extractor unit. 2015 machine in nice condition. We have GEA OptiFlour II 600 units in stock to run with this. Dkodpfxsv Ig Rmj Ahgop

Condition: good (used), 1 x Lavamac washer extractor. Dedpfjzfkpkox Ahgjkp Model LH1200 Year 2009.

Condition: excellent (used), Year of construction: 2021, Used clean air dust collector with frequency converter Year of manufacture: 2021 Max. volume flow up to 10,000 m³/h at the fan Approx. 73 m² filter area Pre-separator as standard 71 dB (A) at full load (according to DIN EN ISO 11201) Certified according to GS-HO-07 H3 residual dust content of 0.1 mg/m³ safely maintained (wood dust) Dksdpezizz Sjfx Ahgsp Models with type-tested rotary valve airlock (FSA) Tested backflow flap Integrated automatic extinguishing system 350+ P Suction nozzle 355 mm Motor rated power 15.0 kW / 3-phase Voltage 400 V / 50 Hz Max. volume flow 10,000 m³/h Rated volume flow* 7,127 m³/h Negative pressure at Vnenn. 3,347 Pa Filter area 73 m² Chip collection volume (net / gross) 3 x 165 L / 3 x 241 L Sound pressure level 72 dB (A) Dimensions (L/W/H) in mm 3,112 x 1,058 x 2,361 Weight 1,074 kg Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2025, Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL Djdpfozkp Rkjx Ahgekp

Condition: good (used), Complete Butter oil – AMF production line This line makes Pure Dairy Fatt from melted butter or cream by separating and evaporation. Capacity output Butteroil up to 2.000 to 4.000ltr/h Input: melted butter (72-84% fat) or concentrated cream or fat stream which already had phase inversion (45/72%). Output: Pure fat > 99.8% Fatt. A Flexible line with manual controls integrated CIP system Process and equipment description: Heater Plate heater exchanger for heating the mix to 80/90°C Complete with pumps, control valves, piping, sensors. 2 Buffer tanks Volume: approx. 8.000ltr, with agitator, stairs and frame, CIP and product valves. Feed pump make Fristam to the separators. 2 Separators: Separator 1: Concentrator Alfa-Laval model: BRPX413-XGD-14c. Concentrating up to ± 95% fat. Separator 2: Finisher Alfa-Laval model: BRPX413-XGD-14c, Concentrating up to ± 99.4% fat For each separator: The fat (light phase) is pumped out to the next stage and the water/protein (heavy phase) are separated out and ejected to a balance tank and pumped of by a separate pump. The separators have their own control panel, and a frequency converter (Danfoss VLT) on the main motor, and are mechanically complete with the inlet and counter pressure valves, water valves (for solids ejection). Evaporator Flash vacuum dryer Complete with: - Vacuum tank. - Vacuum pump. - Product pump. - Level control by float. - Vacuum controller. - Vacuum cooler - Filter on outlet. - Piping and frame. - Controls in central cabinet. - Recirculation tank with agitator placed directly next to the evaporator. Dkodjzki Amepfx Ahgjp - Sight glass with light to check the clearness of the final product, Concentration up to 99.8% Fatt. This is the last stage of concentrating by evaporating the last water through a flush effect where butter oil is heated under pressure and cooled and exploded in a vacuum vessel. Nitrogen injection system N2 Injection system to prevent contact with oxygen in buffer tanks. N2 injection point and its flow meter and control valve Bag filter (cloth) Sight glass with light. Serum separator Next to this there is a separator for the Sirom (heavy phase) to skim/recuperate the remaining fat in the serum and return this into the process. Buffer tank, heater/cooler and pump system are included. CIP system There is a CIP system (semi-automatic) to dose the cleaning detergent from a drum direct into the process. Including: 3 Dosing pumps, a stainless steel storage box for the Drums, injection system, pump, balance tank and controls. Ideal for concentrating a rest stream with fatt in a factory or making Butteroil from butter. Still installed in a Major Butter oil producer factory in The Netherlands.

Condition: used, functionality: fully functional, machine/vehicle number: GE6, Guyson GE6 Mid-sized, industrial manual blast cabinet with dust extraction unit. Suitable for precision surface preparation, cleaning, deburring, and cosmetic finishing of manufactured components using compressed air and abrasive media (such as glass beads or aluminum oxide). Full working order. Dsdpfezguqhox Ahgskp Estimated around 10-15 years old. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 1998, OVERVIEW This ABC 4HA-4-LT high-pressure reciprocating air compressor, manufactured in 1998, is designed for the supply of compressed air in PET bottle blowing applications. The compressor is manufactured by ABC – Arizaga, Bastarrica y Cía S.A. from Eibar, Spain. The machine is a 4-stage reciprocating compressor with oil-free cylinder compression design and a nominal pressure of 42 bar. It is belt-driven. The compressor is mounted on a structural steel skid and includes interstage piping, pressure monitoring, cooling water connections, main drive motor, belt-drive safety guard and integrated control cabinet. The machine is equipped with an analog pressure gauge panel showing the final stage, intermediate stages and oil pressure. The control cabinet is fitted with status lamps for temperature, water, oil, thermal relay and dryer fault indications, as well as an hour meter and emergency stop.   TECHNICAL DATA - Manufacturer: ABC – Arizaga, Bastarrica y Cía S.A. - Manufacturer Location: Eibar, Spain - Model / Type: 4HA-4-LT - Machine Type: High-pressure reciprocating air compressor - Year of Manufacture: 1998 - Application: High-pressure compressed air supply for PET bottle blowing - Compression Design: Oil-free cylinder compression - Number of Compression Stages: 4 stages - Nominal Pressure: 42 bar - Regulation Air Pressure: 8 bar - Suction Pressure: Not specified - Flow Rate: approx. 546.9 m³/h - Compressor Speed: 725 rpm - Motor Power: 150 CV / 110 kW - Total Power to Install: 158 HP / 115 kW - Transmission: Belt-driven Djdpfx Asziawrjhgjkp - Power Voltage: 380 V - Control Voltage: 220 V - Frequency: 50 Hz - Cylinder Diameter, 1st Stage: 250 mm - Cylinder Diameter, 2nd Stage: 160 mm - Cylinder Diameter, 3rd Stage: 105 mm - Cylinder Diameter, 4th Stage: 75 mm - Piston Stroke: 150 mm - Cooling System: Water-cooled - Cooling Water Flow Rate: approx. 6.5 m³/h - Ambient Temperature Range: 0 – 40°C - Cooling Water Temperature Range: 5 – 40°C - Compressor Weight: approx. 2,900 kg - Motor Weight: approx. 830 kg - Complete Equipment Weight: approx. 7,230 kg - Pressure Gauges Observed:Final stage: approx. 42 bar 3rd stage: approx. 16 bar 2nd stage: approx. 6 bar 1st stage: approx. 2 bar Oil pressure: approx. 3.5 bar - Control Cabinet: Integrated electrical control cabinet, marked T2/7 - Operator Elements: Status lamps, analog hour meter and emergency stop - Status Indications: Temperature, water, oil, thermal relay and dryer fault - Safety Equipment: Belt-drive / flywheel safety guard and emergency stop - Construction: Green painted multi-stage compressor on structural steel skid - Additional Equipment Observed: Interstage header pipework, vertical separator / receiver vessel and overhead piping - Certification: CE-marked - Condition: Used, installed in industrial production environment

Condition: used, Year of construction: 2009, Overview  This oil separator was manufactured in 2009 by the German company Donaldson Filtration GmbH. The UFA-AC0016M model was part of a compressed air installation operating with two Atlas Copco GA132 VSD low-pressure compressors. The unit is still installed and connected, has been maintained regularly, with the latest maintenance completed in August 2025, and is immediately available for sale. It can be visited on request. Dodpfx Ahoyb Th Ajgjkp Technical data  - Air operating pressure: 5.5 – 8.5 bar - Water operating pressure: 3 – 5 bar - Condensate operating pressure: up to 10 bar - Operating temperature: 4 – 70 °C

Condition: new, - Type: Professional deck oven - 5 decks × 3 chambers - 15 openings - Energy source: Triple fuel – gas/wood/diesel - Heating system: Annular tubes for uniform heat distribution - Usable depth: 2,200 mm - Condition: Almost new, used only for commissioning and ignition tests Dkodpjzhk Rmjfx Ahgsp - Previous use: No commercial production, only technical tests - Structure: Full stainless steel, durable and easy to maintain - Cooking type: Stone hearth - Controls: Manual adjustment - Operating temperature: Up to 300°C - Insulation: High density, limiting heat loss and consumption - Overall dimensions: Large structure suitable for production workshops - Production capacity: Ideal for high-volume baking (bread, pizza, pastries, etc.) - Overall condition: Excellent

Condition: good (used), Oil filling station, compressed air pump for fresh oil, remote oiling apparatus, oil dispensing device, oil filling device, oil transfer pump, gear oil pump, hydraulic oil pump, centrifugal gear oil pump -operated: pneumatically -Reel -Hose: 6 m - Manual valve with flow indicator -Number: 3x pumps with reel available Price: per piece Dkjdpfxsb A Hzxe Ahgjp -Weight: 60 kg/piece

Condition: good (used), Emulsion splitting plant, oil-water separation system The cost-effective and permanently reliable The solution to the problem is usually the oil/water- Dkodpfx Asb A Ib Hjhgjp Separation for dispersed condensates. Purified water meets legal requirements Regulations for sewer discharge

Condition: good (used), Year of construction: 1996, Fuel gauge, oil pump, oil dispenser, oil station, fuel pump, tank data acquisition, tank system display, oil cabinet, fresh oil pump -Manufacturer: Tecalemit, electric pump for fresh oil -Type: 1.54 80 01.4 -Flow rate: 1 to 10 l/min -Motor: Hanning 0.55 kW Dkodpsw A Nddjfx Ahgjp -Pressure vessel: Volume 2.8 liters -Individual components: see photos -Quantity: 1x oil cabinet available -Price: per piece -Dimensions: 500/480/H250 mm -Weight: 19 kg/pc.

Condition: good (used), Oil-water separation system, condensate separator, oil and water separation apparatus, oil separator, oil/water separator, air compressor oil-water separator -Manufacturer: Jorc, oil-water separator -Type: AIRGROUP-SEP 30 -Dimensions: 970/440/H900 mm -Weight: 56 kg Dsdpjxz Avnofx Ahgjkp

Condition: good (used), DF separator, fine oil separator, air-oil separator, compressed air filter, filter cartridge, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter Dkodpfx Aswbzxqshgjp -Manufacturer: Mann Filter, Air Oil Separator Filter Type 49 002 -Inside/outside: Ø 124/169 mm -Number: 5x air filters available -Price: per piece -Dimensions: Ø 190 x 315 mm -Weight: 2.6 kg/piece

Condition: good (used), Extractor fan, welding fume filter, welding fume extraction, soldering fume extraction, small dust extractor, -Manufacturer: Esta, small dust extractor extraction fan for smoke extraction -Type: Esta 100 Djdpfjpxq Ugjx Ahgekp -Drive: 0.55 kW / 2850 rpm -Fan wheel: Ø 280 mm -Connection: Ø 100 mm -Volume flow: Max. 1000 m³/h -Dimensions: 425/420/H845 mm -Weight: 35 kg

Condition: good (used), Year of construction: 1996, Hydraulic oil tank, hydraulic oil reservoir, hydraulic tank -Hydraulic oil tank: with attachments -Tank capacity: approx. 60 liters -Individual components: see photos Dkodpfopix Ncjx Ahgjp -Dimensions: 730/670/H620 mm -Weight: 74 kg

Condition: good (used), Hydraulic oil tank, hydraulic oil reservoir, hydraulic tank -Manufacturer: GSL (German Standard Lift), hydraulic reservoir for the drive of work platforms -Additional parts: see photos -Dimensions: 300/295/H550 mm Dkedpfxjiy R Uhj Ahgsp -Weight: 11.4 kg

Condition: good (used), Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor: Siemens 2.2 kW -Voltage: 560 V -Speed: 3515 rpm -Volume flow: 1425 m³/h -Connection input: Ø 148 mm -Connection output: 390 x 330 mm Dsdjfd Hffjpfx Ahgekp -Dimensions: 650/520/H470 mm -Weight: 52 kg

Condition: used, Oil-water separation system, condensate separator, oil and water separator, oil separator -Oil-water separation system: oil and water separator -Dimensions container: Ø 500 x 755 mm -Dimensions: Ø 585 x 1145 mm Dsdpfx Aofmilmshgjkp -Weight: 31kg

Condition: used, Oil-water separation system, condensate separator, oil and water separator, oil separator -Manufacturer:BEKO, oil-water separation system Oil and water separation device type Öwamat KT 05 Djdpfxjtxkvro Ahgjkp -Accessories: incl. Oekosorb replacement filter, see photos -Dimensions: Ø 680 x 1130 mm -Weight: 73 kg with pallet

Condition: good (used), Hydraulic oil tank, hydraulic oil reservoir, hydraulic tank -Hydraulic reservoir: from Butler 1200 pallet jack -Contents: approx. 11 liters -Additional parts: see photos -Dimensions: Ø 210 x 580 mm -Weight: 11 kg Dkodpfx Aoi Eg I Hshgop

Condition: good (used), Standard Radiator, Car Radiator, Oil Cooler, Heat Exchanger -Manufacturer: Longer Reich, light metal oil cooler cooler -Type: unfortunately no type designation -Motor: Siemens 0.37 kW -Pressure: max. 16 bar Dkedpfxoi En Dqj Ahgep -Temperature: max. 120 °C -Dimensions: 560/330/H540 mm -Weight: 28 kg