Used Oil Extractor for sale (12,656)

Year of construction: 2018, condition: good (used), functionality: fully functional, Mobile dust extractor according to prEN 16770, Hurrican economy 8000, year 12/2018, with ducting and various dampers for connection to various machines. Todpfx Ahoxyzaveuef

Condition: excellent (used), Year of construction: 2011, 1 x Oil Mist Extractor Absolent AB Tsdpfxetp Thbj Ahuof A mist 10C with HEPA filter Year of manufacture: 2011 In very good condition. The extraction unit can be inspected at our warehouse.

Condition: used, Year of construction: 2002, Air compressor (oil-free) CompAir R 180 Model R 180 TS-Z11 Year of construction: 2002 Weight: 3860 kg Volume flow: 17.0 m³ / min Intake pressure: 1 bar Stage pressures: 2.4 / 12 bar Tedpfx Aou Rphqjhusf Installed motor power: 110 kW The compressor was regularly serviced and inspected until it was decommissioned.

Condition: used, Year of construction: 1993, machine/vehicle number: 5/4573, total width: 7,500 mm, total height: 11,400 mm, overall weight: 45 kg, The cost-effective drainage of condensate for your compressor. The oil is separated from the water with a filter set (ATTENTION: filter set is not included in the scope of delivery) The purified water (only in conjunction with the filter set) is approved for discharge into the sewer. Guarantee and warranty are excluded in this advertisement. Price on request. Tjdpoqmmalofx Ahuef

Condition: as good as new (ex-display), Year of construction: 2022, Press design double column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 4000 kN Free ripping force max. 400 kN Pressure build-up time Closed die steel to steel Max. 4 sec. Dimensions 3,800 mm long and 4,475 mm wide Max. Opening width 800 mm Stroke 800 mm Table height above floor 1100 mm Height above floor (headroom) approx. 4300 mm Hall height min. 5500 mm parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.2 mm/m Weight Total weight of press without operating materials and table plate approx. 28 t Press table Table size 1500x1500 mm Speeds Fast closing with 100 mm sec. Pressing speed 8 - 3 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders/driving cylinders 1 pc. Operating pressure max. 300 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 3 bar Main pump BOSCHREXROTH axial piston pump approx. 145 L/min Oil volume approx. HLP 46 MW 1000 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Auxiliary pump BOSCHREXROTH, gear pump 10 L/min Pressure stabilization for up to 300 sec. Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Connection hydraulics main motor 40 kW Sliding table press with 400 T capacity, Closing speed up to 100 mm/ ( adjustable via touch screen ) Opening speed up to 100 mm/sec ( adjustable via touch screen ) Starting press speed 10 mm/sec ( adjustable via touch screen ) table top size 1500x1500mm ram size approx. 1600x1500mm Oil temperature monitoring 55 degree warning, 60 degree shutdown Automatic lubrication ( adjustable via touch screen ) Free positioning of the ram ( adjustable via touch screen ) SICK/PILZ light barriers 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram protection Circuit oil cooling ( adjustable via touch screen ) Tjdeph Uk Nopfx Ahuof Ejector in table, 20 T press force, 350mm travel Ejector moves outwards with the table Table plate milled flat, with DIN 22 T grooves Pressure adjustment from 60 T to 400 T ( adjustable via touch screen ) Travel limitation either by pressure or position Set-up mode, single stroke and cycle sequence ( adjustable via touch screen ) Swiveling control panel on the cabinet Two-hand operation, with opening button, manual/single stroke/cycle switchover button Installation, commissioning, instruction against separate charge The control is supplied by SIEMENS. ( S 7 1200 ) Also the touch screen monitor with 9 inch. The remote maintenance unit SECOMEA -Ethernet is included in the delivery. The side of the press has two 1000 mm high and 800 mm wide windows with double doors. (sliding table press, hydraulic press, hydraulic press, double column press)

Condition: used, Year of construction: 1998, functionality: fully functional, cooling capacity: 3.3 kW (4.49 HP), input voltage: 400 V, input frequency: 50 Hz, Oil Cooler – Inline Oil Cooler D20V D30V Tedpfx Ahog U H E Ssujf 2 Inline Oil Coolers – Cooling units for industrial machinery – available individually. Two standalone inline oil coolers / flow-through coolers for cooling oil/hydraulic oil, made by Wöhr Kältetechnik, suitable for cooling or temperature control of the coolant circuit or hydraulic system in machine tools. Each unit includes an integrated circulation pump and flow monitor. Built-in control cabinet inside the housing with connection cable, LAE temperature controller MTR11, and volt-free alarm contact in case of malfunction. The integrated circulation pump is a gear pump. These cooling units are designed for clean oil. A programming manual for the temperature controller is included. Both units are used and in good condition. Wöhr Inline Oil Cooler Type D 20 V, Year of manufacture: 1998, Serial No. 98101582, Cooling capacity: 2 kW, Refrigerant: R 404 a, with integrated circulation pump, operating voltage 400V, 50Hz, LAE controller MTR11, equipped with Walter Procon connector (previously installed on the hydraulic system of a grinding machine), dimensions approx. 80 x 75 x 110 cm, total power consumption 1.7 kW. Inline Oil Cooler D 30 V Wöhr Inline Oil Cooler Type D 30 V, year of manufacture 1998, Serial No. 98101583, cooling capacity 3.3 kW, refrigerant R 404 a, with integrated circulation pump, operating voltage 400V, 50Hz, LAE controller MTR11, equipped with CEE connection plug (previously installed on the grinding oil supply of a grinding machine), dimensions approx. 80 x 75 x 110 cm, total power consumption 2 kW. The oil coolers/cooling units are used but well maintained. Price / details on request. All technical details and specifications are subject to possible errors or misprints. Sales exclusively to countries within the European Community.

Condition: good (used), Width: 500 mm Height: 1000 mm Tsdpfx Ahoxuqq Heujf Depth: 500 mm Weight: approx. 20 kg

Year of construction: 2022, condition: new, OMC 3000×1300 105T Oil Shelf Press Working surface 3000x1300mm Opening width 400mm 6 cylinders with a diameter of 85mm Total pressure 105T Maximum heating temperature of 85 degrees Control system logic contorl Machine control from touch panel readouts Temperature, pressure force, shelf opening time, loading area calculator, glue process programming Power 21KW CE certificate Tjdeimwp Sepfx Ahuof Production 2022 Machine available on request New machine

Condition: used, Year of construction: 2015, overall weight: 4,000 kg, total length: 3,435 mm, total width: 1,750 mm, total height: 2,385 mm, power: 200 kW (271.92 HP), volume flow: 28.5 m³/h, pressure (max.): 10 bar, noise level: 81 dB, Equipment: type plate available, KAESER DSG 290-2 oil-free screw compressor Manufacturer: KAESER Model: DSG 290-2 Year of manufacture: 2015 Volume flow: 28,5 m³/h Compressor motor: 5.5 kW Protection class: IP55 Tsdsu Rnzijpfx Ahujf Mains frequency: 50 Hz The compressor was in use until recently and is in good condition. The device can be inspected on site by arrangement.

Condition: excellent (used), Year of construction: 2005, For sale is a fully functional and very well-maintained dual-fuel burner from Weishaupt, including gas train (Dungs DN 65) 1. Burner type: Weishaupt RGL50/1-B Output: 600–5400 kW Version: ZM-NR Year of manufacture: 2005 For sale is a fully functional and very well-maintained dual-fuel burner from Weishaupt, including gas train (Dungs DN 65) Tedpfx Ahewgbpajusf 2. Burner type: Weishaupt RGL50/1-B Output: 600–5400 kW Version: ZM-NR Year of manufacture: 2013

Condition: used, Year of construction: 2003, filter area: 143 m², suction capacity: 6,000 m³/h, Dust extraction, welding fume extractor, self-cleaning cartridge filter, pneumatic, vacuum extraction for plasma, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. The filter is cleaned pneumatically by compressed air pulses during operation, ensuring high efficiency of the unit. The fan is located on the clean side, reducing the risk of explosion to a minimum. Brand: Donaldson Torit DCE Model: DF+6-Cyclo Year of production: 2003 Filter cartridges – 6 pcs. Filtration surface area: 143 m² Fan power: 7.5 kW Capacity: 6000 m³/h Inlet diameter: 300mm/250mm We also offer, on order, new filter cartridges tailored according to the device's application. Dimensions: Height – 3.05 m Width – 1.85 m x 2.35 m Stock number: 0989 Tjdpfxjw I Av No Ahusf

Condition: excellent (used), Year of construction: 2000, used Weishaupt burner ----- Tsdpfxoxf Dzyj Ahusf RGL70 2-A/ ZM year of manufacture: 2000 output: 1,000 - 10,500 kW

Condition: excellent (used), Year of construction: 2001, JUN-AIR Compressor in soundproof housing Model 2000-25M Power (PS) 16.0 bar Continuously adjustable Volume 25 liters Air dryer integrated Very well maintained Only 204 operating hours in a clean environment. Dimensions (LxWxH) in mm: 450 x 660 x 860 Swivel casters with parking brake Tedpfxoxt D Euo Ahuof Noise level up to 52 dB, suitable for use in noise-sensitive environments.

Condition: used, No. 04490 Mobile extraction unit / Mobile dust extractor ESTA Dustomat 10 Tsdpfx Asxn Tilehusf Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts of dust explosion classes St 1 and St 2 400 V, 1.1 kW, with power cable and plug Nominal air volume flow 720 m3/h Filter area 3.5 m2 Extraction pipe connection diameter 100 mm Filter cleaning by hand crank Chip container 670 x 460 mm Mobile unit CE-compliant Transport dimensions approx. 1300 x 600 x 1700 mm LWH Weight approx. 100 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Used machine Tsdexllw Nopfx Ahujf Data to follow

Condition: good (used), High-temperature temperature control unit up to 300°C in very good condition. With interfaces to the machine! Tedpfx Ahjxtiuhouof

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: Fabr. Nr. 281007 - 0125, total width: 900 mm, total length: 1,800 mm, total height: 1,250 mm, type of input current: three-phase, volume flow: 1,150 m³/h, nominal heat output: 90 kW (122.37 HP), Equipment: type plate available, We are selling our warm air heater with room thermostat, Kroll M 100, 90 kW, year of manufacture approx. 2000, age-appropriate good condition. Fully functional. Additionally, the following pipes and bends are available for purchase at an extra charge: - 7 pcs. spiral duct, diameter 355mm, length 2000mm - 1 pc. spiral duct, diameter 355mm, length 1000mm - 2 pcs. spiral duct, diameter 180mm, length 2000mm - 1 pc. Y-piece with gasket, 45°, length 800mm - 6 pcs. bend with gasket, diameter 355mm, 45° - 1 pc. bend with gasket, diameter 355mm, 90° Tjdpfx Ahoxv Akzoujf - 1 pc. reducer, diameter 560/355mm, length 550mm - 8 pcs. sleeve, diameter 355mm - 4 pcs. connector with gasket, diameter 355mm The pipes have previously been installed and riveted.

Condition: excellent (used), For a simple, clean and effecient way to apply coatings, the Dubor spray master manual sprayers come in various sizes and configurations to perfectly suit your needs. Choose from mobile units on rollers for maximum flexibility, or wall-mounted and table-mounted options for designated spraying areas.  The AM-20-M is a mobile spray unit with a 5 litre stainless steel pressure tank and 4m material hose. This requires connection to external compressed air.  Tedpfxsxxyu Nj Ahujf

Condition: used, Year of construction: 2010, type of input current: three-phase, filter area: 50 m², suction capacity: 5,000 m³/h, negative pressure: 3,000 Pa, Dust extractor, welding fume extractor, self-cleaning cartridge filter, pneumatic and vacuum-type, suitable for plasma, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. Brand: TEKA Model: Filtercube 2H Year of manufacture: 2010 The filter is cleaned during operation by compressed air pulses controlled by a microprocessor, ensuring high system efficiency. Low compressed air consumption due to the "Power-Spray" system. The Filtercube central extraction and ventilation unit, equipped with cartridge filters, is the ideal solution for almost any problem involving smoke and dust filtration. The fan is positioned on the clean-air side, reducing explosion risk to a minimum. Applications: - Central extraction system for multiple welding stations - Extraction system for welding robots - Extraction system for thermal cutting and grinding tables - General hall ventilation system (push-pull or displacement system) - Extraction system in combination with extraction tables - Extraction system for grinding non-explosive materials Specifications: - Soundproofed fan housing, power: 4 kW - Capacity: 5,000 m³/h Tsdpfx Ajw Aw Nnohusf - Negative pressure: 3,000 Pa - Inlet diameter: 315 mm - Filtration surface: 50 m² New filter cartridges tailored to customer specifications available on request. Stock no.: 1047

Condition: used, No. 04491 Mobile extraction unit / Mobile dust extractor ESTA Dustomat HMS 10 WN Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts of dust explosion classes St 1 and St 2 400 V, 1.1 kW, with power cable and plug Nominal air volume flow 720 m3/h Filter area 3.5 m2 Extraction pipe connection diameter 100 mm Filter cleaning by hand crank Chip container 670 x 460 mm Mobile unit CE-compliant Transport dimensions approx. 1300 x 550 x 1700 mm LWH Weight approx. 100 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Tsdpfx Ahjxnqaueuof Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 2011, functionality: fully functional, Donaldson DCE Torit DMC-MMC filter oil mist separator, oil separator, oil extractor, air filter Year of manufacture: 2011 Connection: 400V, 1.5KW Fully functional condition, see pictures Forklift available for loading Collection only by appointment in 75053 Gondelsheim Shipping by freight forwarding possible, please inquire with postal code Tsdpfsxri T Ujx Ahuef

Condition: not inspected (used), 7m x 1000mm thermal oil fryer with top hold down belt. Has come from factory producing chicken burgers and nuggets for major fast food chain. 7m frying length, 1000mm belt width. Tedpsigruyjfx Ahujf

Condition: used, Regoplas RT50 Thermo oil temperature control unit Thermo oil up to 300'C Tsdpfx Ahedmn E Hsuef

Condition: used, Year of construction: 2005, filter area: 126 m², suction capacity: 6,000 m³/h, Dust extraction, welding fume extraction, filtration ventilation, self-cleaning pneumatic vacuum dust collector, absorber for plasma, laser, sandblasting, and all types of dry dust. Donaldson Torit model: TDP 1350 Cartridge filter elements are pneumatically cleaned during operation with compressed air pulses, ensuring high device efficiency. Todpew Hrxfsfx Ahuef The fan is positioned after the filter on the clean side, reducing explosion risk to a minimum. Year of manufacture - 2005 Fan power 7.5 kW Capacity 6000 m3/h Filtration surface area 126 m2 Inlet diameter - 315 mm Donaldson Ultra WEB filter cartridges – 6 pcs. Stock no.: 1026 Height - 3.80 m Width - 1.32 m Depth - 1.36 m Base: 1.25 m x 1.25 m

Condition: used, No. 04489 Mobile extraction unit / Mobile dust extractor ESTA Dustomat 61 Todexnprcepfx Ahuof Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts in zone 22 400 V, 3 kW, with power cable and plug Nominal air volume flow 1850 m3/h Extraction pipe connection diameter 160 mm Filter surface area 9.6 m2 Filter cleaning by hand crank Filter dimensions approx. 720 x 510 mm Chip container 860 x 570 mm Mobile unit CE-compliant Including new replacement filter Operating instructions available Transport dimensions approx. 1700 x 800 x 2100 mm LWH Weight approx. 250 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse