Used Exhaust Systems for sale (37,355)

Condition: excellent (used), This machine was filling capsules and tablets into small tubs. The whole line is also available. Gedpfx Aaexm S Hmocekc Bottles are loaded into the line from lazy susan, product is counted and doses into the tub or bottle which is then foil sealed before the screw lid is applied. All machines were bought new in 2015 and appear to be in excellent condition. The counter is a Vitacount 12-1

Condition: ready for operation (used), functionality: fully functional, 1 x Loma Systems combination metal detector checkweigher with air blast reject into lockable bins. This unit meets full retail specification. Model - 7000. Serial number - WO-002970. Metal detector aperture dimensions - 350mm wide x 150mm H (130mm useable). Weighing range - up to 20kg. Weighing platform - 410mm long x 230mm wide. Belt - 2700mm long x 230mm wide. Overall dimensions - 3000mm long x 1000mm wide x 1600mm high. Serviced and calibrated in September 2024. Gjdpfx Aajxl U Idocekc

Condition: good (used), A good used linear weigher with Digiway controls - this machine is a single head weigher with 4 vibratory feed trays - loadcell technology and Digiway controls for fast accurate weighing and filling or granular free flowing products. Gsdou U Ai Hepfx Aacokc

Condition: excellent (used), operating hours: 2,658 h, functionality: fully functional, pressing force: 71 t, filling opening width: 1,000 mm, filling opening length: 1,620 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 600 kg, input current: 200 A, oil tank capacity: 1,250 l, empty load weight: 29,000 kg, Technical data baler: Manufacturer BOA Recycling Systems B.V. Type M75-45-A-5-1.6 Ecoline Year of construction 2021 Hours of operation 2,658 hours (as of May 2024) Number of pressed bales 42,212 pieces (as of May 2024) Press power main press 71,2 kN (71 t) Specific press capacity 9 kg/cm² Operating pressure 280 bar Cylinder stroke 2,200 mm Gkedou Thcvopfx Aacec Feed channel 1,620 x 1,000 mm Capacity per cycle time 2,4 m³ Theoretic cycle time 21 seconds Theoretic throughput rate 450 m³/hour Bale size 1,100 x 720 mm, length variably adjustable up to 1,400 mm Driving motor 45 kW Connected load 100 kW Current consumption 200 A Tying system 5-fold vertical, fully automatic, the press stamp is prepared for an additional 3-fold horizontal binding Throughput rate at a bulk weight of 30 kg/cbm approx. 13,6 tons/hour bulk weight of 50 kg/cbm approx. 24,2 tons/hour bulk weight of 100 kg/cbm approx. 36,4 tons/hour bulk weight of 150 kg/cbm approx. 54,7 tons/hour Bale weight up to 600 kg, depends on material Volume hydraulic oil tank 1,250 l SPS controller Siemens S7 1500 Operating panel Siemens SIMATIC HMI TOUCH Transport dimensions of press 10,000 x 2,800 x 3,385 mm (l x w x h) Press height set up with feed chute 4,743 mm Press height with conveyor belt 7,123 mm Machine weight baler approx. 29 tons Noise level <85 dB (A) Condition of the baler: With 2,658 operating hours, the press is almost as good as new and in very good condition, has hardly any signs of wear and is ready for immediate use. Due to larger material input quantities, the pressing force and throughput of the machine no longer meet the customer's current requirements and is therefore being replaced by a new 120 tonne baler. Only the baler is for sale, without conveyor belt and wire drawing stations. Comments: The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2021, condition: used, Width of the rolls; ±60 cm. Gkjdpfoxiw Nxjx Aacec Length of the inspection belt; ±275cm

Condition: used, Year of construction: 2008, functionality: unexamined, machine/vehicle number: TRGD 08/5-2.5-550-FcV, input voltage: 230 V, Beinlich Radial Piston Pump in mobile setup Manufacturer: Beinlich pump systems Manufactured: 2008 Viscosity: 100-1000 mPa.s Max pressure: 200 bar. Medium used for: Glycol, Linseed oil, Acrylates With Lenze series 8200 vector frequency inverter (adjustable speed) Gsdpfxsxiwg Ro Aacokc Complete with original manuals and diagrams

Condition: excellent (used), Year of construction: 2014, 1,0 St. Trockenlufttrockener mit Material- förderer, als Singlelösung, auf Rollen Gksdpfjxk Ux Tox Aacoc Hersteller: MORETTO Typ: XD 23A Baujahr: 2020 Inhalt Trichter: 380 Liter Trockenlufttemperatur: max. 200° C

Condition: excellent (used), REF: MM6209 1 x Ling Systems stainless steel heat shrink tunnel. Gjdpfxoxdi R Rj Aacekc Technical specification ⚙️ ✅ Manufacturer - Ling Systems ✅ Belt width - 395mm (370mm useable). ✅ Electrical requirements - 3 phase. ✅ Overall dimensions - 2550mm long x 1160mm wide x 2250mm high.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 15.10, total height: 2,500 mm, total width: 1,400 mm, total length: 2,400 mm, type of input current: three-phase, control voltage: 415 V, input frequency: 50 Hz, ic systems automatic bottle filling machine with conveyor. Model 5.5.1 Automatic Isobaric Microblock. Used for rinsing, filling and capping bottles. Suitable for beer, wine and soft drinks. Processes 500 bottles per hour. Fits crown caps of 26 - 29mm. Unit has 5 rinsing nozzles, and 5 filling turrets. NO VAT Gsdpfx Aajwg Sduecekc

Condition: good (used), Turbo systems stainless depositor Model: D900 Stainless depositor, 25Kg hopper, variable speed, hand operated trigger for discharging product Gksdpfx Asffh Adjacec

Condition: used, Year of construction: 2016, Overview  This inspection system was manufactured in 2016 by FT System (Italy). The machine is still in operation in Spain and can be visited in person. It is available due to changes in the production process and is no longer needed by the current owner. Technical data  Capacity: 8,000 bph Formats: 0.75 L bottles Functions: Neck inspection, wall inspection, bottom inspection, washing liquid residue detection Dimensions: 318 × 152 × 235 cm Weight: 1,022 kg Scope of Delivery  Main bottle bottom inspection module Mouth integrity control Wall inspection Washing liquid residue detection Push expulsion Progressive expulsion CIP Astigarraga   Gsdjxfccijpfx Aacokc

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 20212531, The HiTec Steam Cooker, are versatile, custom-built cookers are designed to Steamcook & pasteurize, a wide range of production needs such as gyoza, dumplins etc. Engineered with food safety,EHEDGE, efficiency, and footprint in mind. Year of construction 2021 and not used much since that! Gedpsxl Tnpjfx Aacokc

Condition: excellent (used), Year of construction: 2021, 1,0 St. Aufsatztrockenlufttrockener mit Material- Gkedpfx Aaexk U Afjcoc förderer, Inhalt Trichter 50 Liter Hersteller: PLASTIC SYSTEMS Typ: DAC50N/P TCHC Baujahr: 2021 Inhalt Trichter: 50 Liter Trockenlufttemperatur: max. 200° C Ausstattung: 1,0 ST. Materialförderer Hersteller: PLASTIC SYSTEMS

Condition: excellent (used), machine/vehicle number: SO-22950/1/19, REF: MM6219 1 X Sparc Systems 8-lane linear weighing combination system. Technical specification ⚙️ ✅ Model - LCWS. ✅ Serial - SO-22950/1/19. ✅ Overall dimensions - 1620mm long x 920mm wide x 1620mm high. Gjdpfx Aaoxd S Eqscekc NOTE 🗒️ Quote for service and getting production-ready at cost of £12-15k per unit.

Condition: not inspected (used), Year of construction: 2002, Sterling Fluid Systems TD20D skid mounted pump Serial no: 0222034/1 (2002) 8500 litre/min 9 bar 340mm impeller diameter Gjdpfswdxq Aex Aacekc With Firepac (by Cummins Diesel) drive and wall mounted control

Condition: used, Year of construction: 2012, Accu-Sort Axiom-X 2L Barcode Scanner RA2283 Manufacturer: Accu-Sort Model: Axiom-X Number of lasers: 2 Maximum scans per second 1120 SPS Voltage: 230V AC (12-30V DC) , 24V output Size L 311 mm x W 354 mm x D 176 mm Gksdpfx Ajr Dwbgjacjc Weight of scan head 6.6 kg Mounting bracket: 1.9 kg Cable base 0.8 kg Power supply unit 1.1 kg Housing Powder-coated cast aluminum, high-impact plastic, protection class IP54 Operating temperature: 0° to +50° C Storage: -20° to +70° C Relative humidity 10% - 90% non-condensing Laser type Visible laser diode 650 nM (standard) Power consumption < 40 W Optical indicators (LEDs) Status, trigger, read, RX/TX, network, link, read quality (5 LEDs) Barcode types All standard 1D symbologies Connections Dedicated setup connection, optional RJ45 connection for Ethernet Communication Standard On-board EtherNet/IP, Ethernet TCP/IP, Serial RS232, RS422 and 4 programmable I/O relays Communication Optional DeviceNet, Profibus MTBF > 71,949 hours at 30° C Conformity UL, cUL, CE, FCC (Class A), 21CFR1040, IEC-60825-1 Year of manufacture 2012 Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg

Condition: ready for operation (used), Quin Systhems PTSM322 Mini Machine Manager , serial no. according to photo ,used, good condition, 100% functional, scope of delivery according to photos Gedpfx Asi Ecl Dsacjkc

Condition: good (used), 3D Systems Type: ProX™ 800 ProX™ 800 3D Production Printer by 3D Systems – High-performance SLA Printer Machine has been regularly maintained Operating hours: 18,700 (as of 18.04.2023) Not operated after 18.04.2023 Note: Annual servicing carried out up to dismantling For sale is a used ProX 800 stereolithography (SLA) production printer from 3D Systems. This large-format SLA system is equipped with the latest printhead technology and is suitable for high-precision components and industrial applications (e.g. automotive, aerospace, medical technology). Additional features: - Automatic material replenishment system and pre-assembled material supply module (quick module change, uninterrupted operation) - 3D-Manage™ software for CAD model and print job management - Touchscreen operation on the device (Print3D Pro™) - Status/signal light module, central user interface - Comprehensive safety system including laser safety monitoring (Class I), emergency stop switches, and interlocks - Detailed maintenance and error diagnostics functions - Material container (MDM) Technical Data: - Printing technology: Stereolithography (SLA) with frequency-tripled Nd:YVO4 UV solid-state laser (355 nm, max. 3 W) Gkjdpfoxam Ifox Aacjc - Maximum build volume: approx. 650 × 750 × 550 mm - Dimensions (L × W × H): approx. 1370 × 1600 × 2260 mm - Weight: approx. 907 kg - Resolution: up to 0.00127 mm (laser spot size), 4000 DPI - Accuracy: ± 0.025–0.05 mm per inch - Materials: Wide range of Accura resins (tough, transparent, high-temperature resistant, biocompatible, etc.) Electrical connection: - Power supply: 200–240 V AC - Frequency: 50/60 Hz - Phase: Single-phase - Fuse: 30 A - Weight: approx. 1200 kg incl. material module Condition: used Scope of delivery: (see picture) (Specifications and technical details subject to change and errors!) If you have further questions, we are happy to answer them by phone.

Condition: excellent (used), Year of construction: 2010, 1,0 St. Trockenlufttrockener mit Material- förderer, als Singlelösung, auf Rollen, Inhalt Trichter 75 Liter Hersteller: PLASTIC SYSTEMS Typ: DW60 MT DISP Baujahr: 2010 Inhalt Trichter: 75Liter Trockenlufttemperatur: max. 200° C Ausstattung: Gjdpfxsxk Uy Rj Aacekc 2,0 ST. Materialförderer Hersteller: PLASTIC SYSTEMS

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: SO-22949/1/19, REF: MM6218 1 X Sparc Systems 8-lane linear weighing combination system. Gsdpjxd Thmjfx Aacekc Technical specification⚙️ ✅ Model - LCWS. ✅ Serial - SO-22949/1/19. ✅ Overall dimensions - 1620mm long x 920mm wide x 1620mm high. Note 🗒️ Seller has a quote for service and getting production-ready at cost of £12-15k per unit.

Year of construction: 2013, condition: used, Goudsmit rotary magnetic separator Article number: SCRZ2020018 Year of manufacture: 2013 Excludes rotor with magnetic bars (can be supplied by the manufacturer Goudsmit magnetic systems) Dimensions: 200mm x 200mm See our other ads VMA Wekerom Gkedsxc Ew Depfx Aacsc

Condition: used, Omnidirektionaler barcode scanner X Manufacturer: ACCU-SORT Featured: Gedpfxok Aa Dwe Aacskc The Omni-directional barcode scanner product family mini-X are used for the reading of arbitrarily oriented bar codes. This is made possible by an optical arrangement of several arranged crosswise to each other scanning, which is integrated in a compact housing. Bar codes can be identified at a distance of 500 up to 1800 mm. A total of six configurations to satisfy a wide range of read. With the DRX de fragmentierung technology also badly damaged or poorly printed codes can be reconstructed safely. The TachTrac function maps the read result the right object with several objects in the reading pane. RS 232, RS 422 or RS 485 interfaces the reading result is decoded in the device is delivered. Usage area: The Omni-directional barcode scanner X for arbitrarily oriented bar codes is used in identifying non-aligned objects or labels in the Variantenfertigungs - or material flow control, and charge capture. Multiple scanners can be operated side by side to extend the reading width. Specific applications are picking and returns handling items in the shipping trade of so-called small, E.g. From CD\'s, books, or videos, as well as the sorting in distribution centers. The scanner in the identification of wheels or bodywork in automobile production, as well as packages for package services is further used. Delivery in Germany (without Islands): free incl. mains cable without software Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: new, Balance Systems 9NDRAEA0046000 SN:B512867 ,unused in opened original box, 100% functional, scope of delivery according to photos Gkodpfoi D T A Rjx Aacjc

Condition: excellent (used), Complete line direct from Bankrupt company which was filling capsules and tablets into small tubs. Bottlea are loaded into the line from lazy susan, product is counted and doses into the tub or bottle which is then foil sealed before the screw lid is applied. All machines were bought new in 2015 and appear to be in excellent condition. The counter is a Vitacount 12-1 Godpfx Aaow Hz T Eocekc

Condition: new, Balance Systems 9SGJ025A050200 Digitally operated balancing head, SN:B512879, unused in opened original packaging, 100% functional, scope of delivery as per photos Gedpfx Aasi D T Dnscokc