Used Oil Field Lathe for sale (13,124)

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, turning diameter over cross slide: 630 mm, spindle bore: 320 mm, turning diameter: 1,200 mm, turning diameter over bed slide: 930 mm, turning length: 3,000 mm, Lathe in very good technical condition, has seen very little use and was not used for machining pipes. The Poręba TPL 90/3m lathe (also listed in market nomenclature as a variant of the TPK 90 series) is a textbook example of an Oil Country Lathe / Hollow Spindle Lathe. This model fulfills all the specific criteria for machines intended for the Oil & Gas sector: • Massive spindle bore (Big Bore): This version features a spindle bore with a diameter of 320 mm (approx. 12.5 inches), allowing for easy insertion of thick-walled drill and casing pipes. • Dual chucking system: The headstock is designed for mounting two independent lathe chucks (front and rear, typically 28 inches in diameter), ensuring the pipe is clamped and stabilized at both ends of the spindle. • Optimal working dimensions: The 3m designation defines a turning length between centers of 3000 mm, which, combined with a swing over bed of 930 mm (hence the "90" in the name), allows for machining heavy-duty pipeline components. • Exceptional rigidity: FUM POREBA factory machines are renowned for their monolithic, very wide and heavy cast iron beds, which effectively dampen the immense vibrations generated during taper thread cutting. In international used machinery catalogues, this specific Poręba model is directly classified under the Oil Field Lathes category. TECHNICAL SPECIFICATIONS: Geometric parameters and machining ranges • Swing over bed: 930 mm / 36.6 in • Swing over cross slide: 630 mm / 24.8 in • Swing in gap: 1200 mm / 47.2 in • Maximum turning length between centers: 3000 mm / 120 in • Bed width: 585 mm / 23.0 in Headstock • Spindle bore diameter (Hollow Spindle): 320 mm / 12.6 in (in US nomenclature classified as a 12.5" version) • Spindle speed range: 5 – 250 rpm, or modified versions up to 710 rpm Lhsdpfxey Sf Azo Ahbsg • Number of spindle speed steps: 18 Feed and thread cutting system • Longitudinal feed range: 0.1 – 12.8 mm/rev / 0.004 – 0.504 in/rev • Cross feed range: 0.05 – 6.4 mm/rev / 0.002 – 0.252 in/rev • Types of threads cut: Metric, Inch (Whitworth), Module, Diametral Pitch (DP) Tailstock • Tailstock quill diameter: 130 mm / 5.1 in • Tailstock quill travel: 300 mm / 11.8 in • Internal taper of quill: Morse No. 6 (MT6) Drive and dimensions • Main motor power: 22 kW / 29.5 HP • Overall length: approx. 5500 mm / 216.5 in • Overall width: approx. 1750 mm / 68.9 in • Overall height: approx. 1500 mm / 59.0 in • Total weight: approx. 8000 kg / 17,630 lbs

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: nvt, overall weight: 25 kg, Brand new filling machine / filling machine / Dosing machine which can be used for filling liquids, pastes, creams, oils, etc. Suitable for almost all liquids but also thicker substances. At this point you could think of: Shampoos Creams Ljdpfx Aherivv Eebohg Honey Jam Milk Yogurt Water Alcohol Pesto Disinfection Etc. Very solid machine made from high-quality stainless steel that runs on air and 220v, Plug and Play! Extremely suitable for filling small batches. A very small compressor is enough to get this machine working. This can be supplied if necessary. For this we recommend at least a 12L version. The filling machine has a 500ml cylinder so that it can fill a maximum of 500ml per stroke. By allowing the machine to deliver multiple strokes, a multiple of these is also fine. This also applies to 750ml by giving 2 x 375ml. The smallest stroke is 50ml, everything between 50 and 500ml can be lost in 1 stroke. We also have a model that has a cylinder of 100ml and can therefore fill between 5ml and 100ml per stroke. We would like to inform you further about this. It has a large 25L funnel, and it is also possible to connect the IBC or a 200L barrel to work even faster with large filling quantities. The machine is equipped with a foot pedal and auto mode. In the auto mode, the machine continues to fill continuously and larger quantities can be filled easily and quickly. The speed between fillings can be adjusted. The foot pedal allows you to fill at your own pace. Depending on the operator and number of ML, between 15-25 units per minute can be filled. Which makes this a very fast machine. The machine weighs approximately 15/20kg and can easily be placed on a table. Made entirely from stainless steel, a very high-quality machine. If you have any questions, please email us and we will be happy to help you with this or another machine. We also have a label machine which forms a very good combination with the filling machine. We aim to respond to you within 24 hours. Of course we can also be reached by telephone. We are happy to assist you on working days between 9:00 AM and 5:00 PM

Condition: good (used), Different tool holders . As we informed, they are used on Biglia CNC lathe. Lhjdpfx Asy Shyiohbjg

Condition: ready for operation (used), functionality: fully functional, Oil Quick Pins ØShank Pin Distance Price: Lhedpjxhdh Sefx Ahbeg OQ70 60/60 280 330 €3,000.00 OQ80 90/90 345 510 €3,500.00 OQ80 90/90 353 515 €3,500.00 QO80 90/90 355 510 €3,500.00 OQ80 100/90 387 530 €3,500.00 OQ80 100/100 420 610 €3,500.00 OQ80 90/90 350 510 €3,500.00 OQ80 90/90 350 500 €3,500.00 OQ80 90/90 350 510 €3,500.00 OQ80 80/80 310 475 €3,500.00 OQ90 110/100 440 595 €18,000.00 OQ90 without mount €15,000.00 OQ90 110/110 470 590 €18,000.00 Verachtert Pins Ø Shank Pin Distance CW40 80/80 310 445 €2,000.00 Lehnhoff Pins Ø Shank Pin Distance HS21 80/80 465 333 €2,000.00 HS21 80/80 305 475 €2,000.00 Additionally, adapter plates available Liebherr Pins Ø Shank Pin Distance SWA 48 65/65 253 370 €2,000.00 SWA 48 80/70 350 420 €2,000.00 SWA 48 80/80 327 460 €2,000.00

Condition: good (used), Toolholders bought in company where used for Biglia machine Ledpfx Ahsyuyhijbehg

Condition: not inspected (used), functionality: unexamined, No reserve price – guaranteed sale to the highest bidder! Lhedpsyn Agnjfx Ahbog Placing a bid obligates you to collect the item within the specified period, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! The auction consists of various VDI 30 and VDI 40 tool holders (one of them driven), a drill stand, and additional accessories! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,200 x 800 x 300 mm Weight: 150 kg External reference: Pieper - Lot 4

Condition: not inspected (used), functionality: unexamined, No reserve price – guaranteed sale to the highest bidder! Placing a bid commits you to timely collection, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! Lodpfx Aoynz Ecohbshg Auction of lathe accessories including turning tools, boring bars, and internally cooled drills! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,200 x 800 x 100 mm Weight: 150 kg External reference: Pieper - Lot 133

Condition: not inspected (used), functionality: unexamined, No minimum price – guaranteed sale to the highest bidder! Placing a bid commits you to timely collection, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! Auction of lathe accessories such as collets, tool holders, driven tools, and more! Lhodpfjynzyyex Ahbeg MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,200 x 800 x 200 mm Weight: 200 kg External reference: Pieper – Lot 136

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: G3169-0110, turning length: 530 mm, turning diameter: 420 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 65 mm, travel distance X-axis: 220 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 550 mm, overall weight: 4,700 kg, turning diameter over bed slide: 800 mm, HYUNDAI WIA L200SY CNC TURNING CENTER Year: 2012 | Fanuc 18i-TB CNC Control SN: G3169-0110 • 5-Axis CNC Turning Center – Hyundai WIA L200SY • Main Chuck: 8″ | Sub Spindle: 5″ • Live Tooling & Y-Axis + C-Axis indexing • Max Turning Diameter: approx. 419–420 mm / 16.5″ • Max Turning Length: approx. 520–530 mm / ~20.5–20.9″ • Swing Over Bed: approx. 800 mm / 31.5″ • X Travel: approx. 220 mm / 8.7″ • Z Travel: approx. 550 mm / 21.7″ Ljdsx I A Hcjpfx Ahbehg • Y Travel: approx. 80 mm / 3.1″ • Max Spindle Speed: up to 4,000 rpm • Main Spindle Power: ~20 HP (~15 kW) • Sub Spindle Speed up to 6,000 rpm • C-Axis indexing: 0.001° possible • Tool Stations: approx. 12 • Coolant system and chip conveyor included • Approx. Dimensions: 120″ × 68″ × 80″ • Approx. Weight: ~10,500 lbs (~4,760 kg) NOTE: MACHINE WAS REMOVED FROM GOOD WORKING CONDITION 2 YEARS AGO. PLANNED TO PUT BACK IN SERVICE BUT SELLER WILL NO LONGER BE DOING MACHINING.

Condition: used, Transmission, planetary gear for hydraulic motor, hydraulic motor, oil motor Lodpfxoi Eg Nne Ahbjhg -Manufacturer: dinamic oil, gearbox type EH211 SN 6.2 -Dimensions: see photos -Total dimensions: Ø 230 x 190 mm -Weight: 30 kg

Condition: used, Transmission, planetary gear for hydraulic motor, hydraulic motor, oil motor -Manufacturer: dinamic oil, gearbox type EH201 S 6.2 MO AS -Dimensions: see photos Ljdpfx Aei Eg Ncshbehg -Total dimensions: Ø 230 x 178 mm -Weight: 29 kg

Condition: used, Transmission, planetary gear for hydraulic motor, hydraulic motor, oil motor Lhjdpfxji Eg Nvj Ahbjg -Manufacturer: dinamic oil, gearbox type EH201 S 6.2 MO A16B -Dimensions: see photos -Total dimensions: Ø 230 x 178 mm -Weight: 29 kg

Condition: good (used), Year of construction: 2012, functionality: fully functional, Schiess CNC vertical lathe with C axis, year 1992, retrofitted in 2012 CNC: NUM 1060 FLEXIUM 2 tables, table diameter 2000mm – max turning diameter 2500mm – max table speed 201 rpm – table power 56 KW Lsdpfxsxpqm Rs Ahbohg Load capacity (table included): 16,000kg Movable crossrail with 12 positions, 50mm pitch Available space under spindle nose: min. 795mm, max. 1345mm RAM Z stroke: 1000mm C axis with 360,000 positions – milling spindle max speed 1600 rpm – milling spindle power 22KW – 2 gear ranges Tool magazine: 20 turning tool positions, 35 milling tool positions 1 milling head WIDAFLEX UTS80 1 milling head ISO 50 Renishaw MP60 touch probe (for parts) Tool presetter – Transmit function: G20 / G21 – No rigid tapping Chip conveyor Front door: partial opening M0 / full opening

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, operating hours: 7,000 h, mileage: 60,000 km, load capacity: 200 kg, lifting height: 21,000 mm, TRUCK MOUNTED PLATFORM Oil & Steel Snake 21.12 Year 2014 Working height 21 m Lhjdpfx Aeyud Ndjhbjg Horizontal outreach 12 m Basket capacity 200 kg Working hours 7.000 km 60.000 All hydraulic controls Good conditions All regular documents

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 7,400 h, mileage: 85,000 km, load capacity: 250 kg, lifting height: 20,000 mm, TRUCK MOUNTED PLATFORMS Oil&Steel 20.10 H Plus Ledoyudugepfx Ahbehg Year 2015 Working height 20 m Horizontal outreach 10,2 m Basket capacity 250 kg Working hours 7.400 km 85.000 220 volt electric pump motor Good conditions All regular documents

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 2,500 h, lifting height: 14,000 mm, overall weight: 1,650 kg, transport width: 1,400 mm, transport height: 2,000 mm, construction height: 2,000 mm, next inspection (TÜV): 01/2025, fuel type: hybrid, fuel tank capacity: 5 l, tire condition: 50 %, maximum load weight: 200 kg, operation weight: 1,650 kg, Self-propelled 14 meter crawler articulated work platform for 200kg and 120kg with electronic scales for sale! only 78cm clearance width and 1.95m clearance height! 2-man basket with 1.4m width, can be removed from the ladder with 2 bolts! Power and compressed air connection is available in the basket and can be used Can be operated almost silently with petrol or 230V power (so work is also possible at weekends) all functions (driving, supporting, lifting etc.) can be done with electricity as well as petrol! Good condition, white non-marking crawlers, every service carried out! functional and ready for use! (currently TÜV expired) a current TÜV inspection can also be issued on request. Lhedpfx Ahjvmbzqjbsg If you have any questions, just call or send an email

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2010, operating hours: 990 h, machine/vehicle number: 198871007, mast type: telescopic, lifting height: 18,000 mm, overall weight: 2,700 kg, empty load weight: 2,700 kg, transport length: 5,200 mm, transport width: 1,400 mm, transport height: 2,000 mm, construction height: 2,000 mm, next inspection (TÜV): 01/2025, fuel type: hybrid, fuel tank capacity: 9 l, tire condition: 85 %, color: white, maximum load weight: 200 kg, Self-propelled crawler telescopic work platform with 18m working height and 8.5m lateral reach with 200kg basket load!!! in very good condition, overhauled in workshop, white non-marking crawlers radio remote control, petrol and electric operation, hydraulic track widening and narrowing possible via remote control, clearance height is less than 2 meters despite 18m working height very simple design, therefore very easy to service, Honda petrol engine with speed control via remote control (quieter operation possible) All functions that are possible with the petrol engine work just as well as electrically Power and air in the basket Electronics/control units on the platform replaced, hydraulic hoses replaced, new ball bearings for electric motor, new rubber buffers, return filter, engine oil, fuel filter, air filter, paint on the platform is in good condition, no rust. the basket and the jib arm (the one in front of the basket) are rotatable (both functions are rotatable - special equipment!) Lodpfsvmbzwsx Ahbohg the platform has a total of 3 rotation options (tower, jib arm and the basket) and each can be rotated separately! The crawler platform can be rented and purchased. new TÜV can be organized, TIMA transport trailer (with new inspection, new brakes) is also available to buy optionally for 8,000 net we can also organize transport of the platform worldwide!

Condition: used, functionality: unexamined, Year of construction: 2007, operating hours: 966 h, machine/vehicle number: 172740708, load capacity: 120 kg, mast type: telescopic, lifting height: 14,000 mm, platform width: 1,400 mm, empty load weight: 1,650 kg, transport length: 4,000 mm, transport height: 1,950 mm, construction height: 1,950 mm, next inspection (TÜV): 02/2024, fuel type: diesel, tire condition: 50 %, Tracked lift, tracked articulated work platform Octopussy 14.12 Twin with 120 and 200 kg basket load capacity, switchable, currently without TÜV inspection but operational with diesel engine, fully hydraulic with 2 hydraulic circuits, 4 hydraulic outriggers. Lhsdpfew Aw Anjx Ahbsg

Condition: excellent (used), Model: 4M/65E Condition: Very good Lodpfjxz Tfasx Ahbohg Dimensions: 80.00 (H) x 60.00 (W) x 120.00 (L) inches Additional Description: - Automatic copy lathe - To make spades, shovels, curling's, gun holders, axes, legs, cricket bats and so on. - Makes 4 pieces at the same time. - Router (no sanding attachment) - Speed regulation on slide. - Works great

Condition: like new (used), DN Solutions PUMA DNT2600L 2024 Model – Only 32 Cutting Hours (Like New Condition) Chuck: 12 inch Max Turning Diameter: 460 mm Max Turning Length: 1078 mm Spindle Bore: 81 mm Spindle Speed: 3,500 rpm Main Motor Power: 26 kW Max Torque: 735 Nm X-Axis Travel: 260 mm Z-Axis Travel: 1100 mm Lsdpfx Aoy D E Rishbohg Rapid Traverse: X 24 m/min – Z 30 m/min Turret: 12 Stations Guideway System: Box Guideway Machine Weight: 4,900 kg Condition: 2024 model, only 32 cutting hours, almost in brand-new condition.

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Lhjdpfsxdmgvox Ahbeg Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 270, center width: 900 mm, center height: 210 mm, spindle speed (max.): 3,000 rpm, Equipment: CE marking, TECHNICAL DETAILS Swing diameter over bed: 420 mm Centre height: 210 mm Centre distance: 900 mm Lhodoy Rx A Sopfx Ahbog Spindle bore: 55 mm Spindle speed: 4 - 3,000 rpm MACHINE DETAILS Control type: Teach-in Control system: CNC EQUIPMENT Digital readout (Weiler) Documentation available CE marking

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 3098034, travel distance X-axis: 203 mm, travel distance Z-axis: 762 mm, spindle speed (max.): 1,800 rpm, bed width: 445 mm, center width: 900 mm, TECHNICAL DETAILS Swing diameter over bed: 900 mm Centre height: 450 mm Centre distance: 900 mm Bed width: 445 mm X-axis travel: 203 mm Z-axis travel: 762 mm Spindle bore: 60 mm Lhjdpfoy Rxxmox Ahbog Max. spindle speed: 1,800 rpm MACHINE DETAILS Control: CNC Dimensions & Weight Dimensions (L x W x H): 2,400 x 1,600 x 1,950 mm Weight: 2,000 kg Transport packages: 2 pcs EQUIPMENT Documentation CE marking

Condition: ready for operation (used), Year of construction: 1979, functionality: fully functional, spindle speed (max.): 450 rpm, workpiece weight (max.): 5,000 kg, working width: 2,000 mm, spindle diameter: 105 mm, TECHNICAL DETAILS Swing diameter over bed: 1,050 mm Working width: 2,000 mm Working depth: 1,050 mm Max. workpiece weight: 5,000 kg Spindle diameter: 105 mm Spindle bore: 105 mm Ljdpfsy Rxrtox Ahbjhg Spindle speed: 2.24–450 rpm Thickness: 105 mm Distance between centers: 2,000 mm Max. workpiece weight: 5,000 kg MACHINE DETAILS Motor power: 22 kW Dimensions & Weight Dimensions (L x W x H): 4,900 mm x 1,900 mm x 1,700 mm Weight: 8,000 kg Control: Conventional EQUIPMENT Four-jaw chuck Steady rest

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, turning length: 380 mm, turning diameter: 450 mm, spindle bore: 59 mm, rotational speed (max.): 5,000 rpm, controller model: Seicos 40L Multi, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning diameter: 450 mm Turning length: 380 mm Maximum machining diameter: 340 mm Travel X-axis: 215 mm Travel Z-axis: 400 mm Bar capacity: 51 mm Spindle speed range: 30 to 5,000 rpm Spindle drive power: 11 / 7.5 kW Spindle nose: A2-6 Spindle bore: 59 mm Bearing diameter: 100 mm Turret: 16 stations Feed rate: 0.001 to 500 mm/min Rapid traverse X/Z: 30 m/min Tool shank diameter: 25 x 25 mm Drill shank diameter: 40 mm Tailstock taper: MT 5 Tailstock quill stroke: 300 mm MACHINE DETAILS Control unit: Seicos 40L Multi Total power requirement: 23 kVA Dimensions & Weight Lodpfx Ahjy R Dmiebjhg Space requirement: approx. 5.5 x 2.8 x 2.2 m Machine weight: approx. 4.6 t EQUIPMENT Documentation Chip conveyor Tailstock Signal light Parts discharge chute Tool setting arm Work area illumination Tool holder