Used vertical turning lathes for sale (190)

Condition: ready for operation (used), Year of construction: 2008, operating hours: 72,284 h, functionality: fully functional, feed length X-axis: 685 mm, feed length Z-axis: 200 mm, travel distance X-axis: 685 mm, travel distance Z-axis: 200 mm, chuck outer diameter: 250 mm, rapid traverse X-axis: 45 m/min, rapid traverse Z-axis: 30 m/min, total length: 3,100 mm, total height: 2,650 mm, total width: 4,000 mm, rotational speed (max.): 6,000 rpm, torque: 460 Nm, overall weight: 7,800 kg, controller model: Siemens 840D, control type: CNC control, Equipment: cooling unit, For sale is an EMAG VSC250, year of manufacture 2008. Equipped with a Siemens 840 D control system. Hnodpfow Dyqdex Al Tjp Features: - Infeed and outfeed conveyor (O-belt) - Pneumatically operated transfer unit - Stamping unit - Chip conveyor (ejection left) - Coolant system - Tool turret 12x VDI40 The machine is powered and available for inspection.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 50,457 h, functionality: fully functional, spindle speed (max.): 4,000 rpm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 30 m/min, turning diameter: 200 mm, total length: 8,500 mm, total height: 3,800 mm, total width: 4,300 mm, type of input current: three-phase, workpiece diameter (max.): 250 mm, overall weight: 15,000 kg, controller model: Siemens 840 D sl, For sale is a MAG DVT250, year of manufacture 2011. Equipped with a Siemens 840 D sl control system. Equipment: - Infeed and outfeed conveyor - Chip conveyor (discharge to the right) - Coolant system - 2x tool turrets 12x VDI30 The machine is under power and can be inspected. *The marking unit (Richter [picture 1 right]) is defective and not part of the listing. Hnedpfx Asxc Enisl Tjp

Condition: used, Year of construction: 2014, swing diameter 210 mm turning length 210 mm weight of the machine ca. 13 t Feed diameter: 160 mm Workpiece diameter: max. 63 mm Workpiece length: max. 400 mm Workpiece weight: max. 10 kg Travel distances: X-axis: 340 mm Z-axis: 625 mm Main spindle power: 40%/100%, 34/26.5 kW Torque 40%/100%, 144/112 Nm Hodoyan Rijpfx Al Tjnp Speed: max. 6000 rpm Turret tool positions 2 x 11 (1 gripper) Rapid traverse speed X/Z: 30/30 m/min Spindle size: KK5 Circular diameter: max. 210 mm Workpiece diameter: max. 63/100 mm Tailstock pin: MK3, 120 N/bar Stroke: 5 mm Operating voltage: 400V Control voltage DC: 24V Control voltage AC: 230V Frequency: 50 Hz Electrical equipment: VDE 0113

Condition: used, Year of construction: 1987, faceplate diameter 3600 mm swing diameter 4500 mm turning height 1850 mm turning speed range 0,6- 50 U/min weight of the machine ca. 72 t verticale turning machine double coloumn - digital scale - double coloumn Hodpfx Aloyz Db Uj Tjnp - 2x ram - movable cross slide - extra toolholder (four station) on the side of facing plate

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 00404, turning diameter: 250 mm, Available from: 10.10.2025 – The system consists of two individual units that are linked together. TECHNICAL DETAILS Turning diameter: 250 mm Swing diameter: 260 mm MACHINE DETAILS Hedew T Rx Nepfx Al Tjnp Power supply: 3-phase AC Frequency: 50/60 Hz Operating voltage: 400 V AC Control voltage: 24 V DC Connected load: 36 kW Rated current: 58 A Main fuse: 80 A NH Total weight: 6,500 kg EQUIPMENT - No driven tools

Condition: ready for operation (used), Year of construction: 2010, operating hours: 49,479 h, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Z-axis: 200 mm, spindle speed (max.): 7,500 rpm, turning diameter: 210 mm, turning length: 100 mm, TECHNICAL DETAILS Max. turning diameter: 210 mm Max. turning length: 100 mm Max. swing diameter over bed cover: 210 mm Travel X-axis: 400 mm Travel Z-axis: 200 mm Max. workpiece length: 100 mm Hnjdsxu Ekbspfx Al Tep Max. workpiece diameter: 27 workpieces with 30–85 mm or 18 workpieces with 30–130 mm Max. main spindle speed: 7,500 rpm Main spindle power at duty cycle 10–40/100% max.: 25/16 kW Main spindle torque at duty cycle 10–40/100% max.: 200 Nm Main spindle front bearing diameter: 80 mm Main spindle flange size: Size 5 (DIN 55026) Axes at main spindle unit: X/Z Turret: bottom Number of stations/driven stations: 12/12 Tool mounting in turret: VDI 40 Rapid traverse speed X-axis: 60 m/min Rapid traverse speed Y-axis: 30 m/min Feed force in X/Z main spindle unit: 5,000 N Direct linear measuring system main spindle unit: X/Z MACHINE DETAILS Control: Fanuc 18i TB Electrical Data Operating voltage: 400/50 V/Hz Main fuse: 80 A Total connected load: 36 kVA Dimensions & Weight Machine dimensions (LxWxH): approx. 2,500 x 1,900 x 2,300 mm Overall system footprint (LxWxH): approx. 3,600 x 1,900 x 2,300 mm Machine weight: approx. 6,000 kg Operating hours: approx. 49,479 h EQUIPMENT Full-stroke cylinder on main spindle Splash guard enclosure with fully encapsulated working area Work area lighting Oil/emulsion mist extraction system Hinged belt chip conveyor (discharge height: 1250 mm) Coolant system Circulating parts storage conveyor Automatic central lubrication

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 2760174, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales. Hnodpeyiarujfx Al Top

Year of construction: 2010, condition: ready for operation (used), Turning machine CTV 250 - R Manufacturer: DMG Gildemeister Serial number: 6860000451 Operating hours: 46,491 Spindle hours: 30,748 Hnsdsi Ewq Sspfx Al Tjp Footprint: 4m x 3m Optional cooling unit for connecting two CTV 250 machines

Condition: good (used), Year of construction: 2001, functionality: fully functional, Description Control system: Fanuc 21i-T Circulation diameter (max.): 260 mm Chuck diameter (max.): 250 mm Motor spindle speed: 4,500 rpm Hnjdpfx Aletq Tnus Top Clamping cylinder: Full clamping cylinder Tool carrier: 12-position disk turret without lifetool Tool holder: VDI 40 Workpiece feed: Workpiece circulation belt with drag frame. Chip conveyor: Hinged belt conveyor.

Condition: used, Year of construction: 2001, functionality: fully functional, input voltage: 400 V, We offer 4 pieces Emag VL 3 for sale. Three machines with Lifetool. One machine without Lifetool. Year of construction of the machines 2000-2001 General description: Manufacturer: Emag Machine type: VL3 Technical data: Control: Fanuc 21i-T and Fanuc 18i-T Hsdpfjtrdlaox Al Tonp Rotation diameter: approx. 210 mm Maximum speed 6,500 1/min Turret: VDI 40 mm, 12 stations Hinged belt chip conveyor Spindle holder: GR. 5 Circulating parts conveyor. Machine weight: approx. 5.5 t A used three-jaw chuck is included with every machine. The description is non-binding and should be checked during an inspection.

Year of construction: 2016, condition: like new (used), Offered is a vertical turning-grinding center VLC 100 GT, with the retrofit construction year 2022. Hsdpfxoh Tm Duj Al Tjnp With the pick-up spindle unit, workpieces can be fed directly from the transport conveyor belt to the working area. Due to its modular design, the VLC 100 can be configured for a wide range of applications. The pictures show an example of a combination of turning tools (block steel holders) and grinding spindles for soft or hard machining (inside, outside). Depending on the workpiece or technology, these machining modules can be easily adapted. CONTROL Siemens 840Dsl TECHNICAL DATA Workpiece diameter: max. 100 mm Workpiece height: max. 150 mm X-stroke: 605 mm Z-stroke: 530 mm POWER main spindle 18 kW grinding spindle 12 kW TOOL CARRIER 2x block steel holder VDI / Capto console with grinding spindle 12 kW, 60000 1/min Price, delivery time and equipment of the machine according to agreement.

Condition: like new (used), Year of construction: 2015, Workpiece Ø max. 400 mm Workpiece length max. 300 mm Chuck Ø max. 500 mm Swing Ø 520 mm Travel X-axis: 1,110 mm Travel Z-axis: 595 mm Main spindle: Power 40 / 100 % duty cycle: 47/34 kW Hnodpjxy Ac Sjfx Al Tep Main spindle: Torque 40 / 100 % duty cycle: 600 Nm Main spindle: Max. speed: 2,850 rpm Control: Fanuc 31i No Y-axis

Condition: good (used), Year of construction: 2005, TECHNICAL SPECIFICATIONS OF THE MACHINE WORKING DIMENSIONS Table diameter: 1,300 mm Maximum turning diameter: 1,500 mm Minimum internal turning diameter with boring bar: 450 mm Maximum turning height: 1,700 mm Vertical travel of the ram: 1,000 mm Vertical travel of the crossrail: 1,400 mm Height from faceplate to floor: 970 - 5 mm Number of tool turrets: - 700 mm Tool holder shank section: 40 x 40 mm Ram tool holder section: Square 280 - 300 Machine weight: 27,000 - 30,000 kg Tool model: TOOL CAPTO & ISO50 GENERAL DATA CNC control: SIEMENS 840DD Number of columns: 1 Hnodpfx Aoyyc Ansl Tsp Total machine length (depth) approx.: 4,500 mm Machine width approx.: 5,600 mm Machine height approx.: 6,350 mm Number of T-slots for flange clamping: as per ROHM faceplate T-slots: as per ROHM faceplate Number of slots for jaw mounting: 4 Maximum admissible table load: 5,000 kg Maximum table torque: 2,165 kgm Maximum cutting force: 4,500 kg FEED RATES - WORKING FEED "X" axis slide: 0.1 - 3,000 mm/min "Z" axis ram: 0.1 - 3,000 mm/min Crossrail bridge: 6 / 600 mm/min "C" axis table (milling): 0 - 3 rpm "C" axis table (turning): 0 - 400 rpm - RAPID TRAVERSE "X" axis slide: 7,500 mm/min "Z" axis ram: 5,000 mm/min Crossrail bridge: 600 mm/min

Condition: used, Year of construction: 2009, functionality: fully functional, Offered is a turning and milling machine EMAG VLC 800 MT with tool changer. The machine has a turret with 12 tool positions (VDI 50) and a milling spindle with tool changer for up to 96 tools. The tool magazine can be loaded during processing, which reduces setup time and allows the use of sister tools. The proven EMAG turret is available for turning operations on the machine. On the multifunctional VLC 800 MT production center, workpieces up to 800 mm in diameter can be completely processed in a single clamping. The following components will be sold with the machine: - Pick-up station - Extraction unit (IFM) - Coolant system with belt filter - Chip conveyor CONTROL Siemens 840D MACHINE CONNECTION Mains voltage: 400V AC 50 Hz Connected load: 92kW Rated current: 143A Max. backup fuse: 160A Hsdpfow Au U Usx Al Tenp The machine is sold on an “as seen” basis, without any warranty claims. The machine will be available from November 2025, machine is in production until Oktober. The machine can be completely overhauled on request. Please do not hesitate to contact us fot further information.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Z-axis: 700 mm, turning diameter: 140 mm, turning height: 380 mm, turning diameter over bed slide: 250 mm, TECHNICAL DETAILS Turning diameter: 140 mm Swing diameter: 250 mm Turning height: 380 mm Hjdpfx Alewyvg Tj Tonp Travel paths Travel - X axis: 300 mm Travel - Z axis: 700 mm Spindle Spindle speeds: 1 - 6,000 rpm Drive power 40% duty cycle: 38.00 kW Spindle nose: DIN 55026 - size 6 Spindle bore diameter at front bearing: 110 mm Feed & Rapid Traverse X-axis feed rate: 1 - 30,000 mm/min X-axis rapid traverse: 30.00 m/min X-axis feed force: 9,000 N Z-axis feed rate: 1 - 40,000 mm/min Z-axis rapid traverse: 40.00 m/min Z-axis feed force: 10,000 N Tools Number of tools in turret 1: 11 Number of tools in turret 2: 11 Toolholder: VDI 40 MACHINE DETAILS Control: SINUMERIK 840D Total power requirement: 70.00 kW Machine weight: approx. 22.00 t Space requirements: approx. 5.80 x 8.60 x H3.80 m EQUIPMENT Chip conveyor Extraction unit Infeed and outfeed Reversing gripper

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Z-axis: 700 mm, turning diameter: 140 mm, turning height: 380 mm, turning diameter over bed slide: 250 mm, TECHNICAL DETAILS Turning diameter: 140 mm Swing diameter: 250 mm Turning height: 380 mm Travel paths Travel - X axis: 300 mm Travel - Z axis: 700 mm Spindle Spindle speeds: 1 - 6,000 rpm Drive power 40% duty cycle: 38.00 kW Spindle nose: DIN 55026 - size 6 Spindle bore diameter at front bearing: 110 mm Feed & Rapid Traverse X-axis feed rate: 1 - 30,000 mm/min X-axis rapid traverse: 30.00 m/min X-axis feed force: 9,000 N Z-axis feed rate: 1 - 40,000 mm/min Z-axis rapid traverse: 40.00 m/min Z-axis feed force: 10,000 N Hnsdpfjxf A Npox Al Tep Tools Number of tools in turret 1: 11 Number of tools in turret 2: 11 Toolholder: VDI 40 MACHINE DETAILS Control: SINUMERIK 840D Total power requirement: 70.00 kW Machine weight: approx. 22.00 t Space requirements: approx. 5.80 x 8.60 x H3.80 m EQUIPMENT Chip conveyor Extraction unit Infeed and outfeed Reversing gripper

Condition: used, Year of construction: 2015, turning diameter max. 315 mm swing diameter 315 mm turning height 175 mm Control SIEMENS 840 D SL x-travel 660 mm z-travel 300 mm Hedpfx Aevxwrcel Tonp turning speeds 7500 U/min tool change unit 12 fach VDI 40 total power requirement 36 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 4,4 x 2,2 x 2,7 m Renishaw LP2H Chip conveyor No chuck available No tool holders available No live tooling

Condition: new, functionality: fully functional, travel distance X-axis: 540 mm, travel distance Z-axis: 850 mm, spindle speed (max.): 1,500 rpm, turning diameter over cross slide: 1,000 mm, total length: 2,510 mm, total height: 3,546 mm, total width: 4,155 mm, feed rate X-axis: 20 m/min, feed rate Z-axis: 20 m/min, turning height: 825 mm, mount diameter: 1,000 mm, workpiece diameter (max.): 1,100 mm, overall weight: 16,000 kg, VERTICAL LATHE WITH MOTORIZED TOOLS TECHNICAL SPECIFICATIONS: Axes: - Maximum swing diameter: 1100 mm - Maximum turning height: 825 mm - Maximum turning diameter: 1000 mm - X axis travel: 500+40 mm - Z axis travel: 850 mm Spindle: - Maximum speed: 1500 rpm - Spindle nose: ASA A2-15 - Maximum workpiece weight (including chuck): 1250 kg Turret: - Number of positions: 12 - Maximum speed: 3000 rpm - Turret interface: BMT-85 Feed Rates: - Rapid traverse X / Z: 20 / 20 m/min - X axis ballscrew: diameter 50 x 8 mm Hjdpsyxg N Ajfx Al Tonp - Z axis ballscrew: diameter 50 x 8 mm Motors: - Spindle motor: 37-45 kW - Motorized tool motor: 7 kW - X and Z axis servomotors: 4-7 kW General Data: - Length: 2510 mm - Width: 4155 mm - Height: 3546 mm - Weight: 16,000 kg INCLUDED ACCESSORIES: - Fanuc 0i-TF Plus numerical control (15''), Type 0, color graphic display, Manual Guide I, ONG keyboard, electronic handwheel - Serial, Ethernet, and USB ports - Belt-driven spindle, 1500 rpm, Alpha40/6000i, 37-45 kW, ASA A2-15 - Supplied without chuck - Servo-assisted BMT turret, 12 positions, prepared for motorized tools - Chip conveyor - High-pressure pump 15 BAR - 3-color alarm and cycle-end lamp - Integrated work light - Leveling feet - Tool box with service keys - Air blow system through the spindle - Upgraded turret motorized tool motor – from Fanuc a30iF (30Nm) to Fanuc a40iF (38Nm) - Dual pressure release - Renishaw M.T.P. manual presetting - Oil skimmer - Static toolholder kit - Fume extractor predisposition - Black color NEW MACHINE IN STOCK FOR IMMEDIATE DELIVERY

Condition: used, Year of construction: 2012, turning diameter 400 mm swing diameter 420 mm x-travel 850 mm Hnsdpfxovxwx Ao Al Top z-travel 315 mm spindle head DIN 55026 - Size 11 spindle bearing diameter 140 mm turning speeds max. 4000 U/min tool turret 12 times C5 Capto rapid traverse x + z axis 45 / 30 m/min feeding force 11 kN total power requirement 58 kW weight of the machine ca. 9 t dimensions of the machine ca. 9,5 x 4,5 x 3 m Hard turning Dry machining Chip conveyor Promot Portal and Cellmaster No clamping device available No tools available no Cellmaster accessories available

Condition: ready for operation (used), Year of construction: 2015, operating hours: 15,050 h, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 200 mm, spindle speed (max.): 7,500 rpm, turning diameter: 220 mm, turning height: 175 mm, TECHNICAL DETAILS Turning diameter: 220 mm Swing diameter: 270 mm Turning height: 175 mm Control & axis travel Control: SIEMENS 840 D SL X-axis: 660 mm Y-axis: 300 mm Z-axis: 200 mm Spindle & tool change Max. speed: 7,500 rpm Tool changer: 12-station Hedpfxsxf Apvj Al Tenp MACHINE DETAILS Total power requirement: 24 kW Machine weight: approx. 5.2 t Space requirement: approx. 2.5 x 1.6 x 2.3 m

Condition: ready for operation (used), Year of construction: 2015, operating hours: 15,050 h, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 200 mm, spindle speed (max.): 7,500 rpm, turning diameter: 220 mm, turning height: 175 mm, TECHNICAL DETAILS Turning diameter: 220 mm Swing diameter: 270 mm Turning height: 175 mm Control & axis travel Control: SIEMENS 840 D SL X-axis: 660 mm Y-axis: 300 mm Z-axis: 200 mm Spindle & tool change Max. speed: 7,500 rpm Tool changer: 12-station Hnsdpfewynigex Al Tep MACHINE DETAILS Total power requirement: 24 kW Machine weight: approx. 5.2 t Space requirement: approx. 2.5 x 1.6 x 2.3 m

Condition: ready for operation (used), Year of construction: 2000, General Data Machine weight 14500 kg Movement X-Axis Movement 350 mm Z-Axis Movement 410 mm Hnsdpfx Aox D Dwrjl Tjp Main Drive Number of axis 2 Spindle Speed 2500 RPM This Okuma 2SP-V35 was manufactured in 2000. A robust vertical turning machine featuring a max turning diameter of 350 mm and height of 410 mm. It includes a spindle speed up to 2,500 RPM and a 12-station tool holder. Ideal for precise, heavy-duty turning operations. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 103979, We offer for sale CNC vertical lathe EMAG, VL5i F., year of production 2016, used, preserved, functional. Still in production. Must see. EXW price incl. loading. Hedpfjuyh Tdjx Al Tenp More information on request.

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 124, Price upon request Used CNC Vertical Lathe Manufacturer MORI SEIKI Model VL 55 Year of manufacture 2001 With MSC 518 CNC control, 12-tool turret, and chip conveyor Turning length = 653 mm Turning diameter = 550 mm X-axis = 350 mm Z-axis = 660 mm Speed up to = 2000 rpm Hnjdpfewl An Iox Al Tjp Spindle power = 30 kW Approx. weight = 12.5 t Price upon request Specifications: Used CNC Vertical Lathe Manufacturer MORI SEIKI Model VL 55 YOM 2001 With MSC 518 CNC control, 12-tool turret, and chip conveyor Turning dia. = 550mm Turning length = 653 mm X-Axis = 350mm Z – Axis = 660 mm Speed = 2000 rpm Spindle power = 30 kW Weight approx.. = 12.5 t

Condition: ready for operation (used), Year of construction: 2007, operating hours: 5,426 h, functionality: fully functional, machine/vehicle number: 101098, travel distance X-axis: 400 mm, travel distance Z-axis: 200 mm, workpiece length (max.): 130 mm, TECHNICAL DETAILS Travel range, X-axis: 400 mm Working stroke, X-axis: 150 mm Travel range, Z-axis: 200 mm Chuck diameter: 160 mm Turning diameter: max. 200 mm Machining diameter: max. 130 mm Part length: max. 110 mm Main spindle Spindle flange according to DIN 55026: Size 5 Spindle bearing, diameter front: 80 mm Speed, hybrid bearing: max. 6,000/7,500 rpm Main drive AC asynchronous motor: 1MB200E Indramat Low-voltage technology: Fanuc Power at 100/40 % duty cycle: 16/24 kW Torque at 100/40 % duty cycle: 102/153 Nm Rated speed: 1,500 rpm Feed drive Rapid traverse speed X: 60 m/min Rapid traverse speed Z: 30 m/min Feed force X and Z: 5 kN Ball screw diameter X and Z: 40 mm Acceleration X/Z: 5/5 m/s² Tool holder Cylindrical shank tool holder according to DIN 69880: 12-fold Shank diameter: 40 mm Tool length incl. holder: max. 190 mm Pitch circle diameter: max. 740 mm Pitch circle diameter Lifetool: max. 620 mm Tool holder with driven tools Cylindrical shank tool holder according to DIN 69880: 12-fold Shank diameter: 40 mm Speed: max. 6,000 rpm Rated speed: 3,000 rpm Torque at 10 % duty cycle: max. 37 Nm Torque at 25 % duty cycle: max. 26 Nm Torque at 100 % duty cycle: max. 14 Nm MACHINE DETAILS Closed standard automation Number of carrier bars with workpiece diameter 27 mm: 85 Number of carrier bars with workpiece diameter 18 mm: 130 Permissible total load: max. 120 kg Pick-up stroke depressed: 1 mm Pick-up stroke over-depressed EMERGENCY STOP: 5 mm Hnsdpjy T Iupefx Al Tjp Pick-up spring travel: max. 30 mm Chain length: 162 inches Chain pitch: 25.4 mm Chain tension with 27 carrier bars: 400 N Chain sprocket: Z = 30 Gear ratio: i = 100 Motor revolution/band revolution: 540 Loading time: 2–4 s Electrical equipment Operating voltage: 400–480 V Control voltage DC: 24 V Control voltage AC: 230 V Frequency: 50/60 Hz Connected load: 31 kW Supply line fuse: 50 A Design of the electrical system: VDE 0113 Operating hours: 5,426 h