Used Emag for sale (99)

Condition: good (used), Year of construction: 1991, CNC lathe, Emag USC-2 Built in 1991 Center distance: 1000 mm Iijdpfx Aaswbu A Aeceh Turning diameter over bed: 600 mm Maximum spindle speed: 2800 rpm Power: 46 kW

Condition: used, Year of construction: 2014, max. turning diameter 160 mm max. turning height 150 mm max. workpiece diameter 100 mm max. workpiece height 150 mm max. turning speeds 6.000 U/min Iedpfx Aasqvd Iujceih travel -x axis 700 mm travel -z axis 375 mm c-axis 360 ° control FANUC Vertical Turning Machine | EMAG - VL2 equipped with a workpiece conveyor belt. The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Technical details max. workpiece diameter 400 mm workpiece length - max. 300 mm Control SIEMENS 840Dsl swing diameter 520 mm chucking diameter 500 mm travel x / y / z 995/+,-30/580 mm Additional information Operating hours (total): 1848 hours 1.2.2 BASE TURRET UNIT AND Y-AXIS SLIDE UNIT Iiedpfx Aasw Hxuascoh The Y-axis slide unit is mounted on the side of the machine base. A fast-reacting, position-controlled, and maintenance-free servo motor is used for the axis drive. It drives the slide via a high-precision ball screw. A linear measuring system is built into the Y-axis. Positional accuracy: 2 µm. BASE TURRET UNIT Shortest swivel times thanks to direct swivel drive, cooled for consistent accuracy. MAIN SPINDLE 37.7 KW 1.2.3 HP TURRET DRIVE UNIT FOR DRIVED MACHINE TOOLS (C442) With internal coolant supply to the tool.* Max. speed 6,000 rpm Crosscut speed 3,200 rpm Torque at 100% duty cycle 54 Nm/18.1 kW Torque at 40% duty cycle 83.6 Nm/28.0 kW Torque at 10% duty cycle 100 Nm/33.5 kW 1.2.4 TOOL CARRIER UNIT FOR DRIVED TOOLS TOOLS, 12xBMT75 for BMT75 tool holders 1.2.6 ROTATING WORKPIECE TRANSPORT SYSTEM, O-TYPE Drag frame system for 10 workpieces Max. workpiece height (including workpiece pallet) 300 mm Max. workpiece weight 60 kg 1.2.7 SET (10 pieces) DRAG FRAME for O-type belt For workpiece diameters 150 - 400 mm 1.2.8 BLOW-OFF OF THE WORKPIECE AND THE CLAMPING DEVICE (PICK-UP) 1.2.10 COOLANT SUPPLY 15 bar Coolant pump flow rate approx. 80 l/min at 15 bar. COOLING UNIT (6.5 kW, water-air) A cooling unit (with dual-circuit technology) regulates the machine's thermal balance. The spindle drive, control cabinet, and turret are kept at ambient temperature (10°C - 40°C). Cooling capacity: 6.5 kW 1.2.11 COOLANT DOUBLE FILTER, MANUALLY SWITCHABLE Filter fineness 100 µm, with electrical and mechanical contamination indicator 1.2.12 CHIP CONVEYOR, HINGED BELT VERSION - REAR-FACING Chip discharge height 1100 mm. /With integrated coolant reservoir, capacity approx. 500 l. 1.2.13 EMULSION MIST EXTRACTION Extraction capacity approx. 800 m3/h 1.2.14 FLUSHING GUN 1.2.16 WORKPIECE MEASUREMENT with a measuring probe that is completely protected from chips and coolant outside the work area. 1.2.17 BLOW-OFF PROBE 1.2.19 ENGRAVING SOFTWARE PACKAGE 1.2.20 TOOL LIFE MONITORING - SISTER TOOL MANAGEMENT 1.2.21 TOOL BREAKAGE MONITORING TOOLINSPECT MCU - EUROPE (SIEMENS 840DSL, FANUC 31i/32i) 1.2.23 3-COLOR INDICATOR LIGHT 1.3.2 AXIAL DRILLING AND MILLING HEAD - BMT75 CC 1.3.3 ANGLE DRILLING AND MILLING HEAD 90° - BMT75 CC (i=1:1) 1.3.4 TOOL SET FOR OP10 + OP20 1.3.7 HYDRAULIC FULL-CLAMPING CYLINDER SIZE 150 - with 1 media feedthrough The coolant is supplied to the workpiece through the main spindle and the clamping device. 1.3.10 3-Jaw Power Chuck KNCS-N 500-155 Quick Change n max. = 2200 rpm (Recommended speed according to DIN 6386) - Set of hard base jaws - Set of soft top jaws 1.3.11 Attachments for KNCS-N 500-155 Consisting of: - Chuck flange DIN 55026 A11 - Drawbar adapter with through-hole and shut-off valve for central air or coolant supply - Mounting screws 1.3.12 Irrigation nozzle in chuck bore Additional tool holders with tools

Condition: good (used), Year of construction: 2013, operating hours: 44,500 h, EMAG VL5i vertical turning machine (2013) Manufacturer: EMAG Type: VL5i Year of manufacture: 2013 Operating hours: 44.500 Condition: good, used, in production Control SIEMENS 840 D SL Emulsion mist extraction Isdpsxnnigefx Aacoih chip conveyor Further information will follow

Condition: excellent (used), Year of construction: 2009, operating hours: 67,343 h, functionality: fully functional, All data will be provided upon request regarding this listing. The machine is dirty. Up until July, the machine delivered top tolerances at MAGNA POWERTRAIN and is otherwise in fully functional condition. Iijdpexl Ah Ssfx Aaceh

Condition: used, Year of construction: 2020, operating hours: 6,875 h, machine/vehicle number: IntNr231185, EMAG WEISS cylindrical grinding machine EMAG WEISS type W11-CNC / UNIVERSAL CYLINDRICAL GRINDING MACHINE W 11-CNC SL650 Spindle hours: approx. 6,850 hours Power on hours: 20,422 hours This machine is characterized by its 2 in 1 control concept: 100% conventional cylindrical grinding or switching to 100% CNC cylindrical grinding Technical data: • Control: CNC-controlled (depending on year of manufacture Heidenhain, Siemens or Fanuc) Grinding length max. mm 650 / 1,500; in 25.5 / 59 Centre height mm 200 in 8 Grinding diameter outside mm1 / 390 in 0 / 15.5 Max. weight flying MK 4 kg 100 / lb 220.5 Max. workpiece weight between centres kg 250 /lb 551 Feed: X-axis travel mm 380 / 480 /in 15 / 19 Feed: Z-axis travel mm 1,150 / 1,650 in 45.5 / 65 Grinding wheel diameter mm 400 / 500 in 15.5 / 19.5 Rated power (100% ED) kW 9 / 11 hp 12 / 15 Peripheral speed m/s 20 - 50 Machine equipment: • Grinding wheel drive: Powerful Motor for precise grinding results • Tailstock: Adjustable tailstock for different workpiece lengths • Workpiece holder: Chuck or centering points (depending on the application) • Coolant system: Integrated, to avoid overheating and for optimal grinding results • User-friendly interface: Intuitive CNC user interface for easy programming and control • Measuring systems for real-time monitoring and quality assurance • Machine bed Cast bed Karstens base with high static-dynamic rigidity • X-axis High-precision linear guides, ball screw and glass scale • Z-axis V-flat or linear guides, ball screw and glass scale • Control Touch screen with integrated CNC control based on Windows Dialog programming, DIN programming, program memory. • Technical equipment Electrical cabinet according to VDE with CE mark • Coolant system and extraction system • Paper belt filter system with 250 | Container • Mechanical fume extraction with 1600 m²/3 with control without support foot • Measuring axis for moving to multiple diameters with wide range • Measuring head. Measuring position freely programmable. • Prepare robot interface. • Only provide 10 x l / O without interface plug software and PLC Applications: • Cylindrical external and internal machining • Precision grinding for mechanical engineering, the automotive industry and toolmaking • Production of shafts, bushings, rollers and other rotationally symmetrical workpieces Special features: • High rigidity of the machine body for vibration-free work • CNC control for complex grinding cycles and flexible processing Ijdpfx Aaexiwyqjcsih • Adaptation to customer-specific requirements possible Optionally retrofittable Equipment: • Automated loading and unloading systems • Special mounts and special grinding wheel holders Optional grinding wheels available: • See photos The machine can be inspected by appointment. Subject to changes and errors in the technical data and information as well as prior sale! EMAG WEISS Cylindrical Grinding Machine EMAG WEISS Type W11-CNC / UNIVERSAL CIRCULAR GRINDING MACHINE W 11-CNC SL650 Spindle Hours: approximately 6,850 hours Power On Hours: 20,422 hours 2 in 1 control concept characterizes this machine: 100% conventional cylindrical grinding or switch to 100% CNC cylindrical grinding Technical data: - Control: CNC-controlled (Heidenhain, Siemens or Fanuc, depending on year of manufacture) Grinding length max. mm 650 / 1,500 ; in 25.5/59 Center height mm 200 in 8 External grinding Ø mm1 / 390 in 0 / 15.5 max. weight fl

Condition: used, Year of construction: 2011, Mach. No.: 2380008, Control: Siemens, 4 spindles, travel X/Y/Z 400 x 500 x 425 mm, max. speed 17,500 rpm, pallet changer, 2x 36-position tool changers, tool holder HSK 63, chip conveyor manufacturer: Knoll, type 800 K-1, year 2015, mach. no. 643331, cooling unit manufacturer: Knoll, type FKA/1200, year 2011, mach. no. 478031 Isdpjwufncefx Aacjih +++ Attention: This machine is part of an online sale! +++

Condition: used, Year of construction: 2014, max. turning diameter 160 mm max. turning height 150 mm max. workpiece diameter 100 mm max. workpiece height 150 mm max. turning speeds 6.000 U/min travel -x axis 700 mm travel -z axis 375 mm c-axis 360 ° control FANUC Vertical Turning Machine | EMAG - VL2 equipped with a workpiece conveyor belt. The machine is in very good condition. Iisdpsqvd Iqsfx Aacsh Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2

Condition: used, Year of construction: 2014, Control Siemens 840DSL max. swing diameter 420 mm max. turning height 300 mm max. turning speeds 3400 min/-1 drive capacity - main spindle 45 / 35 kW max. torque 775 / 600 Nm chucking diameter 315 / 400 mm number of tool places 12 Pos. Shank diameter 40 mm x-axis 850 mm z-axis 315 mm rapid traverse (x/z) 45 / 30 m/min weight of the machine ca. 10,0 t dimensions of the machine ca. 4,2 x 1,5 x 3,5 m In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Iijdpsxfwffefx Aacoh Technical features: - driven tools - c-axis - Capacity for pieces diameter 30 to 160 mm : 32 [pos] - Capacity for pieces diameter 120 to 220 mm : 24 [pos] - Capacity for pieces diameter 120 to 340 mm : 16 [pos] The scope of delivery of the machine does not include a clamping device. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: ready for operation (used), Year of construction: 2006, General Data Machine weight 18000 kg Main Drive Spindle speed range 17500 Number of axis 5 Movement X-Axis Movement 600 mm X-Axis Rapid Traverse 45 m/min Y-Axis Movement 600 (975) mm Y-Axis Rapid Traverse 45 m/min Z-Axis Movement 500 mm Z-Axis Rapid Traverse 45 m/min Tools Type of tool holder HSK A63 Media Chip conveyor Yes Additional Equipment Double Tool Change Table 2 Swivel Units for Clamping Bridge 2 NC-Controlled Swivel Units Iodpfx Aaexfw D Uscoih 4 NC-Controlled Rotary Tables KNOLL Coolant System 70 Bar High-Pressure Pump Chip Conveyor General Data Machine weight 18000 kg Main Drive Spindle speed range 17500 Number of axis 5 Movement X-Axis Movement 600 mm X-Axis Rapid Traverse 45 m/min Y-Axis Movement 600 (975) mm Y-Axis Rapid Traverse 45 m/min Z-Axis Movement 500 mm Z-Axis Rapid Traverse 45 m/min Tools Type of tool holder HSK A63 Media Chip conveyor Yes Additional Equipment Double Tool Change Table 2 Swivel Units for Clamping Bridge 2 NC-Controlled Swivel Units 4 NC-Controlled Rotary Tables KNOLL Coolant System 70 Bar High-Pressure Pump Chip Conveyor This 5-axis EMAG BAW 06-22 double-spindle machining center in 5-axis design (on both sides) was manufactured in 2006. It features double spindle machining, a 600 mm spindle distance, and X/Y/Z travels of 600/975/500 mm. The machine includes a high-speed milling spindle at 17,500 rpm, dual 72-unit tool magazines, and a robust HSK A63 tool holder. Additional features include a KNOLL coolant system, 70 bar high-pressure pump, and a chip conveyor. If you are looking to get high-quality milling capabilities consider the EMAG BAW 06-22 machine we have for sale. Contact us for more information. Application Types Milling

Year of construction: 2021, condition: used, Weight: 5,000 kg, SIEMENS Sinumerik control, filter unit IFS IF-Vario M1600, 2 plate heat exchangers, 1 generator water tank, capacity: 600 L, 1 quenching media tank, capacity: 1,000 L, various pumps and piping, control cabinets, handling robot YASKAWA YR-1-6VXH25-A00, automation system/workpiece storage EGS Automation Eldec Mind-L 1000, year of manufacture: 2023, serial number: 190605-5, dual setup; 1 cooling system RHOSS S.P.A. (648); 1 chiller unit RHOSS S.P.A. WK01102178 Mind L-1000S (662), year of manufacture: 2023, serial number: RH00331342 Iisdpfjxnahujx Aacsh

Condition: excellent (used), Year of construction: 2021, Vertical Single-Spindle Turning Center - Vertical Lathe Manufacturer: EMAG Model: VL 400 (Siemens) Year of Manufacture: 2021 Operating Hours: approx. 1,848 Turret Base Unit and Cross-Slide Unit with Y-Axis HP Turret Drive Unit for Driven Tools (C442) with internal coolant supply to the tool Maximum speed: 6,000 rpm Corner speed: 3,200 rpm Tool carrier unit for driven tools: 12 x BMT75 Iiodpevq Iwysfx Aacjh Rotary Workpiece Transport System, O-Design Drag Frame System for 10 workpieces Workpiece height (incl. pallet): max. 300 mm Workpiece weight: max. 60 kg Set (10 pieces) drag frames for O-band For workpiece diameters: 150 - 400 mm Blow-off Device for workpiece and clamping device (Pick-Up) Coolant Supply: 15 bar Coolant Pump Delivery Rate approx. 80 l/min at 15 bar Cooling Unit (6.5 kW, water-air) A cooling unit (with dual-circuit technology) regulates the machine's thermal management. Spindle drive, control cabinet, and turret are maintained at ambient temperature (10°C - 40°C). Double Coolant Filter, manually switchable Filter fineness 100 µm, with electrical and mechanical contamination indicators Chip Conveyor Hinged belt design: rear discharge Chip discharge height 1,100 mm (with integrated coolant tank, approx. 500 l capacity) Emulsion Mist Extraction: Extraction capacity approx. 800 m³/h Rinsing Gun Workpiece Measurement with measuring probe Probe blowing device Tool life monitoring (sister tool management) Tool Breakage Monitoring: TOOLINSPECT MCU-EUROPA (SIEMENS 840Dsl, FANUC 31i/32i) Three-Color Signal Tower Axial Drilling-Milling Head – BMT75 CC 5x Angle Drilling-Milling Head 90° – BMT75 CC (i=1:1) Set of tools for OP10 + OP20 Hydraulic Power Chuck Cylinder, size 150 – with 1 media transfer Max. clamping force 10,850 daN at 70 bar Coolant Through Spindle Programmable Clamping Pressure Adjustment 3-Jaw Power Chuck KNCS-N 500-155 Quick Change Max. = 2,200 rpm (Reference speed according to DIN 6386) Set of hard jaws Set of soft top jaws Attachments for KNCS-N 500-155 Flushing nozzle in chuck bore Additional Tool Holders with Tools: 1x 8.BMT25VL8IKX50 Finishing Tool External 1x 8.BMT25VL8IKX50 Roughing Tool External 1x 60.7516VL8IKDI15 Engraving Tool 1x 60.7516VL8IKDI15 Thread Tap Holder 1x 40.75V5KRVL8IKD Face Milling Cutter 50 mm 3x 80.75V5VL8IKD Boring Bar Holder 2x 27.V520HYDL26 Drill, diameter 20 mm 1x 42.V522L08Ik Drill, diameter 22 mm 1x 27.V514WNL31 Drill, diameter 14 mm Software package Operating manual / Maintenance manual 151025ä

Condition: used, _____ Description: Year of manuf. : 2008 Control : Fanuc 18i-TB Turning diam. : 130 mm Turning length : 110 mm In Generel: Year of manufacture:2008 Control system:Fanuc 18i-TB Turning diameter:130 mm Turning length:110 mm Rotation diameter:200 mm Workpiece height max.:110 mm Spindle: Technology:Motor spindle Iijdpfswkcldex Aacoh Speed:7,500 rpm Power:24 kW Torque:158 Nm C-axis:0.001° Clamping cylinder:Full clamping cylinder Tool carrier (X/Z): Technology:Star turret Number of stations:12 Tool holder:VDI 40 Tool drive:6,000 rpm, 40 Nm X-axis:400 mm Z-axis:200 mm Equipment: Measuring systems:Direct (glass scales) Chip disposal:Chip conveyor Coolant supply:High-pressure pump Automation:Circulating workpiece storage Emulsion mist extraction:Mechanically prepared

Condition: used, Year of construction: 2021, Ser. no. 11479, control, manufacturer Siemens, type Sinumerik 840Dsl, workpiece Ø 200 mm, workpiece length 100 mm, main spindle 18 kW, speed 3,000 rpm, 12-position tool turret, external grinding spindle TSE 200, dressing unit, workpiece transport system, 21 workpiece carrier pallets, chip conveyor, emulsion mist extraction, 2x coolant supply 8/30 bar, paper band filter, magnetic pre-separator, inline workpiece measurement, handling system interface Siemens Profinet, double piston clamping cylinder, flange mandrel +++ Attention: Machine is part of an online auction! +++ Iedpowzvnyjfx Aacsih

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Z-axis: 700 mm, turning diameter: 140 mm, turning height: 380 mm, turning diameter over bed slide: 250 mm, TECHNICAL DETAILS Turning diameter: 140 mm Swing diameter: 250 mm Turning height: 380 mm Travel paths Travel - X axis: 300 mm Travel - Z axis: 700 mm Spindle Spindle speeds: 1 - 6,000 rpm Drive power 40% duty cycle: 38.00 kW Spindle nose: DIN 55026 - size 6 Spindle bore diameter at front bearing: 110 mm Feed & Rapid Traverse X-axis feed rate: 1 - 30,000 mm/min X-axis rapid traverse: 30.00 m/min X-axis feed force: 9,000 N Z-axis feed rate: 1 - 40,000 mm/min Z-axis rapid traverse: 40.00 m/min Z-axis feed force: 10,000 N Tools Number of tools in turret 1: 11 Number of tools in turret 2: 11 Toolholder: VDI 40 MACHINE DETAILS Control: SINUMERIK 840D Total power requirement: 70.00 kW Machine weight: approx. 22.00 t Space requirements: approx. 5.80 x 8.60 x H3.80 m EQUIPMENT Chip conveyor Extraction unit Infeed and outfeed Reversing gripper Isdpfoxf A Npsx Aacoih

Condition: used, Year of construction: 2015, swing diameter 420 mm chucking diameter 400 mm x-travel 900 mm z-travel 495 mm spindle tunring speed 3.100 U/min number of tool places 12 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale! Iedpfxswqr S To Aacsih

Condition: good (used), Year of construction: 2002, Machine type: CNC Lathe Manufacturer: Reinecker Karstens Kopp - EMAG Model: VSC 250 DS Serial number: M02.43446 Year of manufacture: 2002 Iedpokyrwwjfx Aaceih Available immediately Ex site for self disassembly Optionally we can offer dismantling and loading

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: diverse, travel distance X-axis: 700 mm, travel distance Z-axis: 375 mm, rapid traverse X-axis: 60 m/min, rapid traverse Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, mount diameter: 30 mm, turning diameter: 100 mm, chuck outer diameter: 160 mm, turning height: 150 mm, Equipment: documentation/manual, Linked EMAG machining line for spur gears / planetary gears / gears. Highly productive manufacturing line for planetary gears, including integrated automation with raw part storage, marking unit, basket stacking cell for finished parts, and a complete dry-production process. Comprising: - 1x EMAG raw part storage (stacker) - 2x EMAG vertical single-spindle turning centers VLC 100 (Siemens 840 Dsl) - 1x EMAG-KOEPFER vertical hobbing machine VLC 200 H (Siemens 840 Dsl) - 1x EMAG-KOEPFER vertical chamfering machine VLC 100 C, press deburring (Siemens 840 Dsl) - 1x EMAG "TRACKMOTION" internal automation with two carriages (Translift) and dedicated control system, operated via mobile HT8 handheld, for component feeding and transport in the automation aisle between stations (with integrated turning unit) and part removal - O-band automation for up to 24 pallets at each EMAG machining station, enabling optional independent automated operation for each machine - 1x part marking station (MARKATOR scribe marker) Iodpsk Aacajfx Aaceih - 1x EKF automation (gantry) for part handling between EMAG TRACKMOTION, marking station, and stacking cell - 1x EKF basket stacking cell as finished part buffer with 3 basket stacks, uninterrupted operation even during basket stack changes Turning centers with 12-position VDI30 turret, sister tool management, tool life monitoring, integrated probe for dimensional control. Dismantling and loading of the machining centers is the responsibility of the buyer. A powered inspection by appointment is possible. Price/Details on request Sale only within EU countries All technical details are subject to error/typo.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 35,385 h, Control Unit Brand SIEMENS General Data Machine weight 5500 kg Main Drive Spindle speed range 7500 Number of axis 3 Movement X-Axis Movement 400 mm Z-Axis Movement 200 mm Iodpfx Asxa H Theacsih Turret Number of turrets 1 Tools Number of station 12 Type of tool holder VDI 40 Media Internal cooling Yes Additional Equipment Tool Storage: Conveyor belt for max. 27 workpieces Workpiece Feed: Vibratory spiral conveyor, vibrating plate, single workpiece feed Handling Robot: 8-axis Protective Enclosure: Robot cell Scraper Belt Conveyor Oil Mist Extraction Cooling System: Cooling capacity 3 kW Chip Container: 700x700x600 mm It's System of 2 EMAG VL03 vertical turning machines that were manufactured in 2012 and 2010. It features a Fanuc control system, Series 32i-Model A, with a travel range of 400x200mm and a spindle speed of up to 7,500 rpm. The system machine includes a 12-station tool turret with VDI 40 tool holders and a tool drive of 6,000 rpm. Consider the opportunity to buy this vertical turning machine system with robot included. Contact us for more information about this system. Application Types Turning

Condition: good (used), Year of construction: 2011, Control: FANUC max. workpiece diameter: 220 mm max. workpiece weight: 20 kg max. turning length: 175 mm Iedpjvzrk Sefx Aacoih max. speed: 4,500 rpm travel path: X 660, Z= 300 mm tool changer with 12 stations chip conveyor

Condition: ready for operation (used), Year of construction: 2015, operating hours: 15,050 h, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 200 mm, spindle speed (max.): 7,500 rpm, turning diameter: 220 mm, turning height: 175 mm, TECHNICAL DETAILS Turning diameter: 220 mm Swing diameter: 270 mm Turning height: 175 mm Control & axis travel Control: SIEMENS 840 D SL X-axis: 660 mm Y-axis: 300 mm Iiodpfjxf Apvsx Aacjh Z-axis: 200 mm Spindle & tool change Max. speed: 7,500 rpm Tool changer: 12-station MACHINE DETAILS Total power requirement: 24 kW Machine weight: approx. 5.2 t Space requirement: approx. 2.5 x 1.6 x 2.3 m

Condition: good (used), Year of construction: 2013, grinding diameter 390 mm grinding length 650 mm centre height 200 mm total power requirement 46 kW weight of the machine ca. 6 t dimensions of the machine ca. 3x3x2,4 m Universal cylindrical grinding – Type WUG21 (W27) Grinding length 650 mm EMAG Weiss stands for high-end technology in universal cylindrical grinding between centres. With its CNC-controlled WUG 21 machines, EMAG Weiss offers the right solution for virtually every user. --> Technical data Max. grinding length: 650 mm --> Centre height: 200 mm --> External grinding diameter: 1 – 390 mm Ijdpfxew Inr Nj Aacjih --> Max. weight flying MK4: 100 kg --> Max. workpiece weight between centres: 250 kg --> Feed: --> X-axis travel: 480 mm --> Z-axis travel: 1.150 mm --> Workpiece headstock --> Tailstock --> Grinding spindle headstock --> Coolant device, manufacturer HYFRA, --> Belt filter, manufacturer Knoll, type KF 200 - year of manufacture 2012, --> Oil mist filter, manufacturer Cobaron

Condition: used, _____ Description: Year of manuf. : 2011 Control : Siemens 840 Dsl Turning diam. : 250 mm Spindle: Technology:Motortspindle Speed:6.000 rpm Power (max.):39 kW Torque (max.):460 Nm Clampingcylinder:Full-Clampingcylinder Workpiececlamping:3-Jaw chuck, SMW Autoblock, KNCS-NB-260-72 Isdpfsv S Dnkox Aacoih Toolcarrier I: Technology:Turret with 12 stations Taper:VDI 40 Tooldrive:6.000 rpm, 7,5 kW, 24 Nm Toolcarrier II: Technology:Drillingstation with Internal coolant supply Taper:Capto C8 In general: Movement in X/Z:1.180/525 mm Rapid travers in X/Z:60/30 m/min Equipment/Accessory: Positionsensor:Direct scales in X/Z Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with paperbeltfilter and high-pressure Toolmonitoring:ARTIS CTM Automation:Workpiecestorage, Circulation systems for Storage, Type L Oilmistseparation:Interface Electrostatic extraction prepared

Condition: used, Year of construction: 2001, Offered is a vertical single spindle pick up turning machine EMAG VSC 250 built 2001. The machine is equipped with a conveyor belt (O-Type) that runs through the machine. The automation belt is loaded with workpieces at the front of the machine. The work area has one working spindle and one turret with 12 tool positions. Other accessories such as a chip conveyor, coolant equipment or independent extractor unit are not included in the advertisement. The machine was taken out of service a few years ago. After inspection, the VSC 250 is fully functional and in good condition, as can be seen in the pictures. The machine has been completely cleaned and repainted. All control cabinet components and cables are still in their original condition. COTROL Siemens Powerline TECHNICAL DATA workpiece diameter: max. 200 mm workpiece height: max. 150 mm swing diameter: 250 mm X-stroke: 685 mm Z-stroke: 200 mm MAIN SPINDLE power: 28 kW speed: max. 6000 rpm Ijdpstrwdtefx Aacjih TOOL CARRIER 1x disc turrets, 12x D40 without driven tools The machine is sold without any warranty claims. Delivery time of the machine on request.

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 101331, travel distance X-axis: 300 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 5,000 rpm, turning diameter: 140 mm, turning length: 630 mm, TECHNICAL DETAILS Max. turning diameter: 140 mm Chuck swing diameter: Ø 250 mm Turning height: 630 mm Control: SIN840 PL Spindle Spindle speeds: continuously variable 1 - 5,000 rpm Iiodpfx Aexf An Seacoh Drive power (40% duty cycle): 38.00 kW Spindle head: according to DIN 55026 - size 6 Spindle diameter in the front bearing: 110 mm Axes X-axis travel: 300 mm X-axis feed: 1 - 30,000 mm/min X-axis rapid traverse: 30.00 m/min X-axis feed force: 9,000 N Z-axis travel: 700 mm Z-axis feed: 1 - 40,000 mm/min Z-axis rapid traverse: 40.00 m/min Feed force Z-axis: 10,000 N Tool turret Number of tools in turret 1: 12 Number of tools in turret 2: 12 Tool holder: VDI 40 DIN 69880 MACHINE DETAILS Total power requirement: 70 kW Machine weight: approx. 25 t Space requirement (L x W x H): approx. 6.8 m x 4.7 m x 4.3 m EQUIPMENT - Chip conveyor - HYFRA spindle air conditioning unit - Knoll coolant system