max. bar capacity 32 mm
z-axis max. 305 mm
control System TX 8i-p
Main spindle:
Max. rpm 8.000 min/-1
power capacity - main spindel 6,7 / 10,7 kW
max. Torque 21 / 32 Nm
max. bar capacity 32 mm
C-Axis 0,001 °
Turret 1:
number of toolpositions 10 pos.
Number of driven toolspositions 10 pos.
Spindle speed - driven tool stations max. 12.000 min -1
power capacity driven tool-stations 1,5 / 2,5 kW
taper diameter 45 mm
turning tool - shaft cross cut 16 x 16 mm
x-axis 140 mm
z-axis 305 mm
h-Axis 0,...
turning diameter over bed 12,7 mm
spindle passage 14 mm
turning length 120 mm
turning speeds 12000 U/min
positive location each 1° Grad
gripping station 12
turning length 180 mm
turning speeds 12000 U/min
number of tools 5+4+5
number of milling stations 4
control GE Fanuc 16i-TB
positive location each 15 Grad
Number of axles 5 St.
Grwbhzh
chip conveyor kW
total power requirement 3,7 kW
weight of the machine ca. 2,1 t
dimensions of the machine ca. 2 x 1,15 x 1,8 plus Iemca m
bar loader Iem...
spindle passage: 23 mm
z-axis: 150 mm
turning length: 150 mm
stroke: x+z Achse / Axis/eje/eixo/os = 30 mm
facing movement (x-axis): 30 mm
longitudinal traverse (z-axis): 30 mm
control: Num 760T
spindle turning speed - continuous: 0-3000 / 0-6000 U/min
feed speed: x/y: 5 mm/min
feed speed: z: 10 mm/min
tool turret: 2 Stück/pcs mit je/each 6 tools
operating pressure: max. 45 bar
total power requirement: 8,0 kW
weight of the machine ca.: 2,2 t
dimension machine xH: 2,45x1,3x2,2 m
dimensions of the...
turning diameter over bed 20 mm
spindle passage 20 mm
turning length 240 mm
control Fanuc 310i
weight of the machine ca. 3.8 t
Cbnxoexr
turning diameter over bed / mm
spindle passage 28 mm
turning length 3000 mm
-----
BASIC FUNCTIONS
- number of turrets 2
Feh9ksp3e
- live positions: yes
WORKING RANGE TURNING
- turning diameter (max) 28 mm
- bar diameter (max) 28 mm
- worpiece length max. 3000 mm
MAIN SPINDLE
- c-axis: yes
DIMENSIONS / WEIGHTS
- space requirements -left/right- 2600 mm
- space requirements -front/back- 2400 mm
- total height 1700 mm
ATTACHMENTS (TURNING)
- - bar length (m...
turning diameter over bed 50 mm
spindle passage 32 mm
turning length 100 mm
Control FANUC 31i-B
Main spindle ---
bar capacity 32 mm
spindle bore 37,00 mm
spindle stock travel 365 mm
spindle turning speed - stepless 1 - 8000 U/min
power capacity at 100 % load 7,50 kW
feeding force at 40 % ED 10,50 KW
counter-spindle ----
O3qyl
bar material dia. 32 mm
spindle bore 37 mm
spindle stock travel 300 mm
spindle turning speed - stepless 1 - 8000 U/min
power capacity at 100 % load 3,70 kW
feeding force...
max. machining diameter 32 mm
max. machining length ca. +/- 100 mm
Control TX 8i
Main spindle:
turning speed range - main spindle max. 8.000 min/-1
power capacity - main spindel 10,7 / 6,7 kW
max. Torque 32 / 21 Nm
max. usable bar diameter 32 mm
C-Axis 0,001 °
Subspindle:
Spindle speed range subspindle max. 8.000 min/-1
power capacity - Sub spindle 10,7 / 6,7 kW
max. Torque 32 / 21 Nm
max. usable bar diameter 32 mm
C-Axis 0,001 °
Traverses Subspindle Z4: 250 mm
turret:
Btxbzpk3cj
number o...
turning diameter over bed 12,7 mm
spindle passage 14 mm
turning length 120 mm
turning speeds 12000 U/min
Yozgzgc
positive location each C-Achse, 0,001° Grad
gripping station 12
turning length 180 mm
turning speeds 12000 U/min
number of tools 5+4+5
number of milling stations 4
control GE Fanuc 16i-TB
positive location each C-Achse, 0,001° Grad
Number of axles 7 St.
Number of working hours 41630 Stand 21.05.202
total power requirement 3,7 kW
weight of the machine ca. 2,1 t
dimensions of the ma...
turning diameter over bed 50 mm
spindle passage 26 mm
turning length 275 mm
total power requirement 12 kW
weight of the machine ca. 4500 kg
Cbwj9hz8
CNC-Sliding Headstock Lathe, Opposite Headstock
turning diameter over bed 10 mm
spindle passage 10 mm
turning length 70 mm
turning speed range 8835 U/min
Boring depth max. mm
speed control shaft U/min
total power requirement 2,2 kW
Ru3eapurn
with 3-spindle bore and thread-cutting unit, bar loader
Serialno. 56136
turning diameter over bed / mm
spindle passage 36 mm
turning length / mm
-----
BASIC FUNCTIONS
- number of spindles 2
- - counter spindle: yes
- number of turrets 1
- live positions: yes
- number of c-axes 2
- number of y-axes 2
WORKING RANGE TURNING
- bar diameter (max) 36 mm
MAIN SPINDLE
- spindle revolutions (min) 6300 /min
- drive power S6 40% 10.7 kW
COUNTER SPINDLE
- spindle revolutions (max) 6300 /min
ELECTRICAL SPECIFICATIONS
- mains volt...
Control: CNC path control incl. 19" TFT colour - Ergoline
SIEMENS 840 D "Operate" solution line
TECHNICAL DATA
Main spindle
Bar capacity max. 50 mm
Drive power (40/100% ED) 24/16 kW
Speed range up to 7.000 rpm
C-axis
Counter spindle (tool carrier 3)
Diameter/chuck holder 140 mm
Drive power (40/100% ED) 24/16 kW
Speed range up to 7,000 rpm
C-axis
traverse path:
X-axis 145 mm
Blreohvc
Z-axis 380 mm
Tool carrier 1 (top)
traverse path:
X-axis 215 mm
Z-axis 350 mm
Y-axis + 35 mm
Tool carrier 2 (bo...
turning diameter over bed 20 mm
spindle passage 20 mm
turning length 450 mm
spindle stroke 450 mm
main spindle speeds: 8000 U/min
spindle drive 5,5/3,7 kW
Sub - spindle - bar diameter 20 mm
turning speed range sub spindle 8000 U/min
motor power 5,5/3,7 kW
collets 145E
total power requirement 16 kVA
weight of the machine ca. 4,2 t
dimensions of the machine ca. 2,4 x 1,6 x 2,3 m
MAIER swiss lathe in first class condition (partly overhauled)with cnc control
FANUC 31iTB equipped with:
- System ...
turning diameter over bed 12,7 mm
spindle passage 14 mm
turning length 120 mm
turning speeds 12000 U/min
positive location each 0,001° Grad
gripping station 12 mm
turning length 180 mm
turning speeds 12000 U/min
number of tools 5+4+5
number of milling stations 4
Bub07uadql
control GE Fanuc 16i-TB
positive location each 0,001° Grad
Number of axles 7 St.
chip conveyor ja/yes kW
total power requirement 3,7 kW
weight of the machine ca. 2,1 t
dimensions of the machine ca. 2 x 1,15 x 1,8 plus Iemca...
Models SW-42
=== SOLD ===
Total machine working time:
Left spindle - 3372 hours
Right spindle - 1483 hours
Chip feeder
High pressure pump
The bar feeder is not included in the selling price
Max. machining diameter Ø 42 mm
X0eyw
Max. turning length per chuck Hybrid guide ( Bush / Bushless )180 / 110 mm
Number of tools 6
Shank size □ 20 mm X 1 □ 16 mm X 5
I.D. tools Number of tools 5
Sleeve size ER20
Max. drilling capacity Ø 13 mm
Max. tapping capacity M12 x P1.75
Cross live tools Number of tools...
turning diameter over bed 10 mm spindle passage 10 mm turning length 70 mm turning speed range 8835 U/min Boring depth max. mm speed control shaft U/min total power requirement 2,2 kW
Ozkqp
turning diameter over bed / mm
spindle passage 32 mm
turning length / mm
-----
BASIC FUNCTIONS
- number of spindles 2
- - counter spindle: yes
- number of turrets 2
- spdl. indexing device: yes
- live positions: yes
- number of c-axes 2
- number of y-axes 3
WORKING RANGE TURNING
- bar diameter (max) 32 mm
MAIN SPINDLE
- spindle revolutions (max) 7000 /min
- drive power 5.5 kW
- c-axis: yes
COUNTER SPINDLE
- spindle revolutions (max) 7000 /min
...
turning diameter over bed 12,7 mm
spindle passage 14 mm
turning length 120 mm
turning speeds 12000 U/min
positive location each 1° Grad
gripping station 12
turning length 180 mm
turning speeds 12000 U/min
number of tools 5+4+5
number of milling stations 4
Ejbsuau2
control GE Fanuc 16i-TB
positive location each 15 Grad
Number of axles 5 St.
chip conveyor kW
total power requirement 3,7 kW
weight of the machine ca. 2,1 t
dimensions of the machine ca. 2 x 1,15 x 1,8 plus FMB m
bar loader FMB ...
turning diameter over bed 12,7 mm
spindle passage 14 mm
turning length 120 mm
turning speeds 12000 U/min
positive location each 0,001° Grad
gripping station 12 mm
turning length 180 mm
turning speeds 12000 U/min
number of tools 5+4+5
number of milling stations 4
control GE Fanuc 16i-TB
positive location each 0,001° Grad
Number of axles 7 St.
chip conveyor ja/yes kW
total power requirement 3,7 kW
weight of the machine ca. 2,1 t
dimensions of the machine ca. 2 x 1,15 x 1,8 plus FMB m
bar load...
Wood lathe
- Removable bed
- 1500 Between centers
- Three-jaw 280mm
Olzol
- 2.2 kW
Transport dimensions: 700 * 1750 * 2700mm (W * H * L)
Complete with Newall Topaz DRO
Good set of Interlocked Guards
6.3 -140 RPM
0.005"-0.250" Per rev feed
Belt Conveyor
Bw9t78tdsc
RPT
Had Top end rebuild a few years back. Excellent condition
Model: CNC Turning lathe / Teach-in
Bcl2kd
Manufacturer: L&W Machine Tools / Cyclone (Taiwan)
Type: FB-1860
Control: Fagor
Centerdistance: 1500mm
Swing over bed: 460mm
Center height: 230mm
Cross-slide height: 230mm
Spindle speed: 33-3100 rpm
Boring hole: 56mm
X-travel: 280mm
Z-travel: 1310mm
DF BOEHRINGER - DUS 400 Ti
Cycle Teach in lathe Ø 420 x 1000 mm
MACH - ID 6537
Make: VDF BOEHRINGER
Type: DUS 400 Ti
Control: HeidenHain
YOP: 2006
Parat tool system with inserts
C Axis indexing 360.000 Pos
Handwheels X and Z Axis
Swing over bed Ø: 420mm
Swing over cross slide Ø:230mm
DBC Turning Length: 1.000mm
Spindle bore: 51mm
Spindle power: 11kW
Tailstock spindle Ø: 4Ø
Stroke pinole: 110mm
Spindle taper: 70Mk
Speeds / ranges: 3000Rpm
Feed rate X-Axis: 5....
BERTHIEZ Vertical Turning Lathe
Type:TFM200
Year:1975
Table:2000mm
Max. turning diameter:2300mm
Max. load capacity:20t
Max. turning height:2500mm
Ram travel:1600mm
Ram section:224x224mm
Carriage travel from centre to right/left:1305/400mm
Cross rail vertical travel:2200mm
Spindle speed:200rpm
Toolchanger:12atc
Hzzwi0uqm
Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accur...
Woodturning lathe with copying device KILLINGER type KM 2500 S
machine. No. D-4453 Year of construction 1981
centre height 250 mm
Bsh2gm9mjs
turning diameter max. 500 mm
centre distance 1000 mm
spindle speed 570 - 2900 rpm. 4 steps
spindle mounting thread M33 x 3,5 mm
Tailstock inner taper MK 2
motor power 1,5 kW
Mains connection 380 Volt, 50 Hz
- 1 piece 3-jaw lathe chuck Ø 100 mm (with one set of clamping jaws)
- 1 piece workpiece holder for M33 x 3,5 mm
- 1 piece fixed steady rest Ø approx. 1...
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
Single spindle automatic lathe WACHTLER - A25 GLE
All accessories are included.
The machine is in a well-maintained condition.
Technical data of the machine will follow soon.
Btxcivw093
We ask for your understanding !
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
#Tags: A 25 | A-25 | A25GLE
swiss type automatic lathe
brand: STROHM
type: 125EN
new in: 1960
equipped with: 3-spindle-drilling unit
Bqdfp7g3
pickup atachment
year of construction 1988
expansion in 1992, 1994
work spindle new 03/2013
drum lock renewed 08/2018
thread cutting coupling renewed 10/2020
6 spindle
Pjx39
material passage max 26mm
3 thread milling and polygon turning device
bar loading magazine and chip conveyor
Short automatic lathe
Manufacturer: Ico
Type: LNT 36
Year of manufacture: 2005
Control: Siemens
bar passage: 36 mm
max. turning length: 130 mm
Wyrrmzm
spindle speed: 5000 1/min
Tooth type: F42
cross slide X-axis: 50 mm
longitudinal slide Z-axis: 75 mm
turret: 8 pl.
Tool holder: VDI 30
Required space: 2,8x2x2,2 m
Weight: 4,2 t
JUNGENTHAL Vertical Turning Lathe
Year:1961
Turning diameter:1100mm
Chuck:1000mm
Spindle speed:180rpm
Iz32ik7o8
Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing, since machines are in production at time of photos...
turning length 300 mm
workpiece dia. 200 mm
turret head Werkzeugstationen 6
Boc0s3ctwy
number of spindle speeds 700-3000 U/min
spindle bore 20 mm
rapid traverse 9 m/min
total power requirement 1 kW
weight of the machine ca. ca. 1,0 t
dimensions of the machine ca. 1,10 x 0,4 x 1,2 m
machine has a lot of accessories
operating instruction
turning diameter over bed: mm
spindle passage: 60 mm
turning length: 45 mm
tool turret - number of stations: 8
Number of tools: 6 St.
turning diameter: max. 56 mm
drill depth: max. 70 mm
revolution per minute: 48 - 1500 (spindle) U/min
threading: Drehzahl: 24 - 750 U/min
total power requirement: 5,5 kW
weight of the machine ca.: 2,4 t
space requirement of the machine approx.: L:2,1x1,0x1,8 m
Cam-Controlled Automatic Lathe
- 2 x rotary slide
- 2 x cutting-off carriage
- cooling system
S8zdzgnvb
...
6-spindle-automatic lathe
brand: INDEX
type: MS25E
new in: 1996
D8e3ukij
equipped with: pick up attachement
threading attachement
barfeed
5
incl. plenty of accessories
speed 110 - 4457 1/min
Bw7i9flacr
max bar length 3000 mm
6 fold turret
incl housing and accessories
Control Fanuc,
spindle passage 16mm,
Iemca loading magazine,
Bwsxufmx8t
accessories: collets etc.
immediately available.
Tornos MultiDeco 20/8 very well maintained condition,
- type Multi Deco 20.8
- machine number: 3044
- year of construction 12.2001
- operating hours 65724 h
- last bearing of the main spindles 03/2019
Technical data:
- bar diameter : 5-20 [mm]
- max. piece length (without counter-operation) : 100 [mm]
- max. length of piece (with counter-operation) : 80 [mm]
- spindle rotation speed : up to 5000 [rpm]
- max. spindle power : 15 [kW]
- max. bore/threading power : 3.7 [kW]
- number of numerical ax...
Weight:350 kg
Speed:500, 800, 1450, 2000, 2800 U/min.
H0ag2tgei
Motor output:1,5 kW
number of spindles: 1 Stück
spindle passage: 20 mm
Ys0rxpyf
turning length: 350 mm
turning diameter over bed: 240 mm
revolution per minute: 23-4457 U/min
spindle bore: 22 mm
material length: 2000 mm
voltage: 3x380/50Hz V / Hz
total power requirement: 8 kW
weight of the machine ca.: ca. 1,5 t
space requirement of the machine approx.: L:1,84xB:0,9xH:1,8 m
One Spindle - Cam Controlled Automatic Lathe with bar loader
- number of travels: 5 axis
- turret support travel longtidudinal 60mm, swing 125mm...
rotary automatic machine
brand: ULDRIAN
type: TSM 280
new in: 1994 (overhauled in 2013)
equipped with: sawing unit
Bwzptkp0lj
5x working units
coil straightener
coil stand
new control unit
number of spindles:6
spindle passage:20 mm
Cam controlled multi spindle automatic lathe, used
6 main spindles,
control: Siemens S5 PLC, electronical trip dog control type ?Balluff?
gear box for thread milling (2 pieces)
pick up for rear machining in pos. 6, work piece sorting shute,
coolant pump,
threading clutches, stock stand and reel,
tooling: could be different like pictures
partly revised inclusive new spindle bearings of the main spindles
interface for IEMCA bar loader
option: barl...
number of spindles 6
spindle passage 27 mm
turning length mm
Eijx9drl
total power requirement 11 kW
weight of the machine ca. 5 t
dimensions of the machine ca. 7 x 1,5 x 2,3 m
Automatic lathe STAR SST 16 CNC with bar feeder IEMCA MINI BOSS 325 CNC
Machine runs perfectly and is available immediately
Location Aachen
Pe2xz
number of spindles 6
bar capacity 32 mm
Spindle spped 6.300 UpM
Control Siemens - Sinumerik 840D
Multi-spindle lathe INDEX MS 32 C
The machine has worked machine in 1 to 2 shifts.
Bar loader: IEMCA SIR MS32 / 43 / F (4 meter magazine)
- Siemens SINUMERIK 840D with 16 free input / output
- Single NCU
- Artis tool monitoring
The machine has one C axis / transmit function each on the 6 main spindles
(Cylindrical path milling on lateral surface)
3 electrical preparations for auxiliary drives...
x-axis: 150-180 mm
y-axis: 70-80 mm
turning length: 180 mm
number of slides: 2
control: SPS Tecomat NS 950
spindle diameter: 160 mm
total power requirement: 12 kVA
weight of the machine ca.: 2,2 t
space requirement approx.:: L:2,0xB:2,0xH:2,3 m
Single spindle short turning automatic (Ends-Lathing Automatic)
Construction
Single spindle-horizontal, for serial production of small parts
Bjymx0ee
Turning dia.: lateral face turning =60-140mm; longitudinal lathing=ca.160mm
Swing dia.:
Two cross moving...
Automatic coil machine
brand: ESCOMATIC
type: D6-S-R
new in: 1989
equipped with: 1A-turret
coil straightener
coil stand
metal cover
Gq2ux2q0
Boley CNC Lathe BC - 42 year 2002 28000 hrs single shift operation.
Counter spindle tool turret 12 stations all driven.
Clamping device DIN 173 E
With approx. 40 tool holders, driven tools and standard holders.
R7snlye
Control: Mitsubishi Meldas 635
