Used Vertical Turning Center for sale (23,550)

Condition: ready for operation (used), Year of construction: 2008, operating hours: 10,294 h, functionality: fully functional, machine/vehicle number: P087WH855, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, table load: 300 kg, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 700 mm Travel range, Y-axis: 400 mm Travel range, Z-axis: 330 mm Rapid traverse speed: 54 m/min Spindle speed: 100–10,000 RPM Distance spindle–baseplate: 250–580 mm Main spindle power: 5.5 kW Table area: 650 × 400 mm Table load: 300 kg Tool positions: 21 MACHINE DETAILS Dimensions & Weight Dimensions: 1,565 × 2,027 × 2,336 mm Machine weight: approx. 2,200 kg Control system operating hours: 24,164 h Operating hours: 10,295 h EQUIPMENT Central oil interval lubrication 100 mm column extension Interior lighting 16 additional I/O Rapid traverse with bell-shaped acceleration and deceleration Manual handwheel feed Directory display from memory card 1,000 storable programs Multilingual display Thermal compensation of XYZ axes Parameter back-up function Retraction cycle for tapping without a collet MANUAL GUIDE Background editing Extended part program editing Coordinate system selection G92 Workpiece coordinate system G52–G59 48 additional workpiece coordinate systems G54.1 Return to reference point G28 Quick Editor Setup file Production counter Tool correction memory C for D/H code and wear Thread cutting without a collet M29 Subprogram call M98/M198/M99 Customer macro B G65, G66/G67 Drilling cycles G73, G74, G76, G81, G89/G80 Coordinate system rotation G68/G69 Circular interpolation with R programming AI Contour Control I G05.1 Helical interpolation Skip function G31 Hedpfxjzul Tce Ac Tjt Multi-step skip G31 P1–P4 Check of travel limit before movement Check of stored travel limit 1 Check of stored travel limit 2 G22/G23 Customer PMC Real-time customer macro

Condition: repair required (used), Year of construction: 2005, functionality: not functional, machine/vehicle number: 15125250184, travel distance X-axis: 2,500 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 18,000 rpm, Note: Error in the magnetic linear measuring system of the X-axis TECHNICAL DETAILS Number of axes: 3 Travel range of X-axis: 2,500 mm Travel range of Y-axis: 920 mm Travel range of Z-axis: 820 mm B-axis rotation: 105° Table length: 3,100 mm Table width: 900 mm Table length: 3,100 mm Table width: 900 mm Tool holder: SK40 Max. spindle speed: 18,000 rpm MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (L x W x H): 7,500 x 4,500 x 300 mm Net weight: 22,000 kg Transport packages: 3 EQUIPMENT External cooling Hedpjzu Nyaofx Ac Tjt Chip conveyor Tool magazine (30 pieces)

Condition: new, Year of construction: 2026, functionality: fully functional, turning height: 2,300 mm, workpiece weight (max.): 12,000 kg, turning diameter over cross slide: 2,650 mm, turning diameter: 2,700 mm, faceplate diameter: 2,000 mm, total height: 7,100 mm, total width: 5,500 mm, total length: 8,500 mm, rotary table diameter: 2,000 mm, rotational speed (max.): 250 rpm, rotational speed (min.): 1 rpm, spindle speed (min.): 5 rpm, spindle speed (max.): 2,500 rpm, table load: 12,000 kg, table diameter: 2,000 mm, warranty duration: 24 months, overall weight: 63,000 kg, faceplate torque: 43,000 Nm, repeat accuracy: 0.015 mm, REM SCR 27 1SF — CNC Vertical Turning & Milling/Drilling Center Hedpfxezb Ufvs Ac Tet 🔴 MACHINE CURRENTLY UNDER ASSEMBLY — DELIVERY MAX 3 MONTHS 🔴 24-MONTH WARRANTY — LONGEST IN ITS CLASS 🔴 UNBEATABLE PRICE FOR EUROPEAN CNC QUALITY ━━━━━ MACHINE HIGHLIGHTS ━━━━━ ✓ Complete turning + milling + drilling in ONE setup ✓ 12-Station ATC — bi-directional, 30 sec tool change ✓ Live spindle ISO 50 — 5 to 2,500 RPM | 37 kW ✓ C-Axis for full contour milling ✓ FANUC 0i-TF PLUS CNC — global support ✓ Heidenhain absolute measuring system (X: LC 195F) ✓ CE certified, full enclosure 3,300mm height ✓ Heavy-duty Meehanite cast iron structure ━━━━━ TECHNICAL SPECIFICATIONS ━━━━━ • Max Machining Diameter: 2,650 mm | Swing: 2,700 mm • Max Machining Height: 2,300 mm • Table Diameter: 2,000 mm (8 T-slots + 4 clamping jaws) • Max Workpiece Weight: 12,000 kg • Table Speed (turning): 1–250 RPM • Main Motor: 100 kW FANUC servo | Torque: 43,000 Nm • Ram Cross Section: 250×250 mm • X/Z Rapid Feed: 10,000 mm/min | Feed: 0.02–6,000 mm/min • X/Z Thrust Force: 35,000 N • ATC: 12-station disc | Max tool Ø 300mm | L 400mm • Coolant: 2,000 L tank | External 10 bar | Through-spindle 40 bar • Chip Conveyor: SARIGÖL hinged, 500mm wide • Accuracy: ±0.020 mm/m | Repeatability: ±0.015 mm • Electrical: 400V/50Hz | 140 KVA | Fanuc 0i-TF PLUS • Weight: 63,000 kg | 8,500×5,500×7,100 mm ━━━━━ IDEAL APPLICATIONS ━━━━━ Large gear blanks | Ring gears | Wind energy hubs & rings Heavy castings & forgings | Oil & gas flanges Mining equipment components | Aerospace large parts ━━━━━ COMMERCIAL TERMS ━━━━━ Delivery: MAX 3 MONTHS from order Warranty: 24 MONTHS parts + labor Incoterms: EXW Bacău, Romania Payment: 50% advance + 50% before shipment Installation & commissioning: included Manufacturer: REM Bacău, Romania

Condition: excellent (used), Year of construction: 2008, operating hours: 12,000 h, functionality: fully functional, Basic information: Manufacturer: HANKOOK Machine Tools Model: VTC 85R Year of manufacture: 2008 Control system: FANUC Series 21i-TB CNC vertical turning center Full C-axis Powered tools Accessories included in the machine price: hydraulic chuck Ø 600 mm Hjdpfozuzdkex Ac Tet clamping plate Ø 1,000 mm set of jaws 4 pcs of vices clamps holders for powered tools Thanks to the C-axis and powered tools, the machine is also suitable for combined machining, drilling, and milling operations without the need to transfer the workpiece to another machine. Extensive clamping and tooling accessories are included. Operational status: only approximately 12,000 operating hours the machine was primarily operated in a single-shift operation it was not fully utilized for production the machine is connected and can be demonstrated in operation. Machine dimensions: height: 3500 mm length including conveyor: 5500 mm width: 2500 mm

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 3,048 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Travel ranges Travel range X-axis: 3,048 mm Travel range Y-axis: 813 mm Travel range Z-axis: 762 mm Main spindle Spindle speed: 6,000 rpm EQUIPMENT Hjdeztq Txopfx Ac Tot Coolant system

Condition: used, Year of construction: 2018, workpiece weight (max.): 35,000 kg, total length: 15,600 mm, total height: 6,000 mm, total width: 6,000 mm, overall weight: 155,000 kg, The Pittler WMZ PV4000 / 1-2 is a heavy CNC vertical turning machine with a portal design, featuring one workpiece spindle and two independently movable tool carriers. The machine enables turning, drilling, milling, and grooving. The right tool carrier is designed as a swiveling multifunction head with a B-axis and driven tools. Two separate chain magazines provide a total of 94 tool positions. Technical Data Machine Number: ZV029 Machine Concept: Portal machine with one workpiece spindle and two tool carriers Machining Processes: Turning, drilling, milling, and grooving Maximum Swing Diameter: 3800 mm Maximum Workpiece Diameter: 3800 mm Maximum Workpiece Speed: 100 min-1 Rated Speed: 36.7 min-1 Workpiece Clamping: Manual Chuck: Röhm Tool Holder: Capto C8 Tool Magazines: 2 chain magazines Tool Positions: 2 x 47 Total Number of Tool Positions: 94 Hodpfx Acezwa Rbj Tst Maximum Tool Diameter: 120 mm according to the operating manual Maximum Tool Diameter: 150 mm according to the order confirmation with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Travel Paths X1-Axis Right Tool Carrier: 3200 mm X2-Axis Left Tool Carrier: 2800 mm Z1-Axis Right Tool Carrier: 1000 mm Z2-Axis Left Tool Carrier: 1000 mm Rapid Traverse X-Axes: up to 32 m/min Rapid Traverse Z-Axes: up to 20 m/min Workpiece Spindle Gear Reduction: 1 to 30 Maximum Speed: 100 min-1 Rated Speed: 36.7 min-1 Rated Power: 67.4 kW Short-Term Total Power: 202.2 kW Rated Torque: 52.65 kNm Maximum Drive Torque: 71.55 kNm Torque according to Order Confirmation: 67000 Nm at 40% duty cycle Motor Spindle Power according to Order Confirmation: 200 kW at 100% duty cycle Maximum Spindle Load Capacity including Chuck, Clamping Jaws, and Workpiece: 35000 kg Spindle Flange Diameter: 1900 mm Thrust Bearing Diameter: 1400 mm The workpiece spindle is designed as a water-cooled motor spindle with precision axial deep groove ball bearings. Tool Carrier and Multifunction Head The right tool carrier features a swiveling multifunction head with two Capto C8 holders for turning tools as well as drilling and milling tools. B-Axis for Stepless Positioning Swivel Range: 180 degrees Speed of Driven Tools: up to 6000 min-1 Tool Spindle Torque: approx. 120 Nm at 100% duty cycle Hydraulic Clamping Direct Measurement System Direct Coolant Supply High-Pressure Coolant Supply: up to 70 bar Tool Magazines Two chain magazines with 47 tool positions each Tool Holder: Capto C8 Maximum Tool Diameter: 120 mm Up to 150 mm with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Tool Cleaning with Blowing Air Manual Magazine Loading Coolant and Chip Disposal Two Knoll Chip Conveyors Type 600 S-2/120 Knoll Band Filter Type KF400-2300 Additional Equipment Röhm Chuck Spindle Cooling Hydac FLKS-4S Hydraulic Unit Hydac TBM20 Electrical Data Operating Voltage: 3 x 400 VAC Protection Class: IP55 Maximum Power Consumption: 280 kVA Component weight max.: 35,000 kg Swing: 3,800 mm Rotation height max.: 2,100 mm Weight approx.: 155,000 kg Dimensions (LxWxH) approx.: 15600 x 6000 x 6000 mm Table diameter: 3,800 mm Control: Siemens SINUMERIK 840D sl Year of construction: 2,018 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: refurbished (used), Year of construction: 2012, Offered is a vertical turning center EMAG VSC 250. Hsdpsh Tkdqjfx Ac Tot The machine had a mechanically overhaule in 2022 and will be sold like new. The machine is equipped with automation belt. Other peripherals is not included, and can be offerd if requested by customer. CONTROL Siemens 840Dsl TECHNICAL DATA Workpiece diameter: 250 mm Workpiece height: 100 mm X-stroke: 860 mm Z-stroke: 200 mm MAIN SPINDLE power 28 kW TOOL CARRIER EMAG wheel turret, 12x VDI 40 Delivery time and additional equipment of the machine on request.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 10,000 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, No minimum price – guaranteed sale to the highest bidder! Bidding obligates the winner to pick up the machine between September 21st and October 1st! TECHNICAL DETAILS Travel range, X-axis: 550 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 450 mm Travel range, B-axis: -110 to +110° Travel range, C-axis: 360° Distance from pallet surface to spindle center: -20 to 430 mm Distance from B-axis center to spindle center: -40 to 410 mm Distance from B-axis center to spindle center: -20 mm Distance from pallet center to Z zero point: 265 mm Distance from pallet center to Y zero point: 180 mm Pallet Work area on the pallet: Ø 130 mm Pallet load capacity: 40 kg Max. workpiece size: Ø 250 × 250 mm Pallet mounting surface: 4 × M12 × 1.75 Distance from pallet bottom to pallet surface: 970 mm Pallet indexing, B/C-axis: 0.001° / 0.001° Pallet change time, B-axis: 1.2 s/90° Pallet change time, C-axis: 0.9 s/90° Pallet change time, C-axis: 1.2 s/180° Pallet change time, C-axis: 1.4 s/270° Pallet torque, B-axis: 1,070 Nm Pallet torque, C-axis: 192 Nm Pallet braking torque, B-axis: 1,112 Nm Pallet braking torque, C-axis: 500 Nm Spindle Spindle speed: 50 to 15,000 rpm Spindle speed change: 5-digit direct S-command Tool interface: SK 40 Spindle taper: 7/24, Taper No. 40 Spindle bearing inner diameter: 70 mm Max. spindle torque: 65.1 Nm at 1,100 min⁻¹ Spindle air blow: Standard Spindle orientation: Standard Tool clamping force: 7.0 kN Tool Changer Tool magazine capacity: 240 positions Tool shank: JIS B 6339, tool shank 40T Pull stud type: JIS B 6339, pull stud 40P Max. tool diameter: 80 mm Max. tool diameter with free auxiliary stations: 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Tool selection: Fixed address system Tool change arm: W-gripper type Feed Rates Rapid traverse rate, X/Y/Z-axis: 50 m/min Rapid traverse rate, B-axis: 30 min⁻¹ Rapid traverse rate, C-axis: 50 min⁻¹ Feed rate, X/Y/Z-axis: 1 to 50 m/min Hedozqunhspfx Ac Tst Feed rate, B-axis: 30 min⁻¹ Feed rate, C-axis: 50 min⁻¹ Rapid traverse acceleration, X/Y/Z-axis: 0.6 G Rapid traverse acceleration, B/C-axis: 2,500 / 2,000 °/s² Max. acceleration during cutting feed, X/Y/Z-axis: 0.4 G Max. acceleration during cutting feed, B/C-axis: 2,000 / 4,000 °/s² Tipping feed rate, X/Y/Z-axis: 0 to 4000 mm/min Tipping feed rate, B/C-axis: 0 to 11.11 min⁻¹ Min. movement increment, X/Y/Z-axis: 0.001 mm Min. movement increment, B/C-axis: 0.001° MACHINE DETAILS Control: MATSUURA G-TECH 840 DI Serial number: 350536 Electrical Connection Values Rated apparent power: 36 kVA Input voltage: 415 V Input frequency: 50 Hz Input current: 50 A Dimensions and Weight Overall length: 6,000 mm Overall width: 5,000 mm Overall height: 3,500 mm Overall weight: 15,000 kg EQUIPMENT - Chip conveyor - Coolant system - Tool holders on the tool changer External Reference: Hanon - Lot 1

Year of construction: 2019, condition: excellent (used), SEMA-Maschinenbau Type MT-40-C Technology Drilling Year of manufacture: 2019 Control Unit Technical Specifications Control System - CNC control: SIEMENS 840 D SL Dimensions & Weight - Space required (left/right): 13,480 mm - Space required (front/rear): 10,502 mm - Total height: 4,532 mm - Total weight: approx. 23,000 kg Electrical connection data - Power consumption (total): 210 kW - Connection voltage: 400 V - Mains frequency: 50 Hz Basic machine with 11 stations 1. Station 1: Component loading with multi-axis handling. 2. Station 2: Crown turret *Sauter 112* (3 spindle units, HSK 40) with internal cooling (IKZ), max. speed 15,000 rpm. 3. Station 3: Crown turret *Sauter 112* (3 spindle units, HSK 40) with external cooling. - Additionally: 1 × 2-axis unit *SEMA AE2-35/50/NC*. 4. Station 4: 1 × SE-HSK 50C spindle unit with internal cooling, max. speed 15,000 rpm. 5. Station 5: 1 × Crown turret *Sauter 112* (3 spindle units, HSK 40) with internal cooling. 6. Station 6: 1 × Sauter 112 crown turret (3 spindle units, HSK 40) with internal coolant. - Additionally: 1 × SEMA AE1-35/50/NC 2-axis unit. 7. Station 7: Hydraulic docking unit including C-axis positioning unit. - Equipment: 7 × SEMA AE1-35/50/NC 2-axis units. 8. Station 8: Hydraulic docking unit including C-axis positioning. - Additionally: 1 × permanently integrated angle head. 9. Station 9: 1 × SEMA AE3-35/50/NC 2-axis unit. 10. Station 10: Permanently integrated angle head *Benz S-35/50/NC*. 11. Station 11: Cleaning unit for blowing off (inside/outside). --- Notes on structuring: - The information is grouped thematically (control, dimensions, electrical system, stations). - Technical details such as spindle types, cooling, and speeds have been listed precisely. - Models and manufacturers (Sauter, SEMA, Benz) are highlighted. Hodpowf R N Hsfx Ac Tst - Stations 7 and 8 have been more clearly separated to avoid confusion. - Consistent formatting for better readability. Do you need further adjustments? 😊 Siemens Sinumerik NCU 730.3BPN 840DSI Electrical capacity 210 KW Availability date 05/2025 Weight 23 t

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, year of last overhaul: 2023, Offered is a VSC 250 vertical turning center, which has been mechanically and electrically overhauled by EMAG. The control system was upgrated to Siemens Sinumerik One. Depending on requirements, the machine can be equipped with various automation options (shuttle, O-type conveyor, L-type conveyor, turn around station) and other peripherals such as chip conveyors, coolant systems, etc. CONTROL Siemens Sinumerik One TECHNICAL DATA Workpiece diameter: 250 mm Workpiece height: 100 mm X-stroke: 860 mm Z-stroke: 200 mm MAIN SPINDLE power 28 kW TOOL CARRIER EMAG wheel turret, 12x VDI 40 Delivery time and additional equipment of the machine on request. Hjdpfsrq Damex Ac Tst

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 06584, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, controller model: Hurco Ultimax, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Axes: 3 Travel in X-axis: 1,020 mm Travel in Y-axis: 510 mm Travel in Z-axis: 610 mm Spindle speed (max.): 8,000 rpm Motor power: 15 kW Table length: 1,220 mm Table width: 510 mm MACHINE DETAILS Control system: Hurco Ultimax Drive system: CNC Hodpfx Aozuw A Nec Tjt Dimensions & Weight Dimensions (L x W x H): 2,700 x 2,350 x 2,400 mm Weight: 5,000 kg Shipping packages: 1 EQUIPMENT Documentation CE marking

Condition: ready for operation (used), Year of construction: 2018, operating hours: 14,317 h, functionality: fully functional, travel distance X-axis: 520 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 350 mm, controller model: Fanuc i, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 520 mm Travel range, Y-axis: 360 mm Travel range, Z-axis: 350 mm Spindle speed: 12,000 rpm Distance spindle to base plate: min. 150 mm / max. 500 mm Hsdpfx Ajzul R Isc Tjt Table area: 650 × 375 mm Table load: 2 × 200 kg Tool weight: max. 2.8 kg Tool magazine: 14 positions MACHINE DETAILS Control system: Fanuc i Dimensions & Weight Dimensions (L x W x H): 3,230 × 1,620 × 2,507 mm Machine weight: approx. 5,200 kg Operating hours: 14,317 h EQUIPMENT Rigid tapping – thread drilling without compensation chuck Spindle overspeed and power display Telescopic guards on the X, Y, and Z axes Rapid traverse in the X, Y, and Z axes Door safety switch 3-color indicator light Work area lighting Coolant supply from a 200-liter tank via adjustable coolant nozzles at the spindle nose Internal cooling Machine cover, closed on top / Top cover Oil skimmer Pneumatic clamping system A, 1 pair per pallet Automatic work area door with safety strip Coolant system with delivery pressure: 4.5 bar

Condition: used, Year of construction: 2020, workpiece weight (max.): 35,000 kg, total length: 15,600 mm, total height: 6,000 mm, total width: 6,000 mm, overall weight: 155,000 kg, The Pittler WMZ PV4000 / 1-2 is a heavy CNC vertical turning machine with a portal design, featuring one workpiece spindle and two independently movable tool carriers. The machine enables turning, drilling, milling, and grooving. The right tool carrier is designed as a swiveling multifunction head with a B-axis and driven tools. Two separate chain magazines provide a total of 94 tool positions. Technical Data Machine Number: ZV029 Hodpfxjzu S U He Ac Tjt Machine Concept: Portal machine with one workpiece spindle and two tool carriers Machining Processes: Turning, drilling, milling, and grooving Maximum Swing Diameter: 3800 mm Maximum Workpiece Diameter: 3800 mm Maximum Workpiece Speed: 100 min-1 Rated Speed: 36.7 min-1 Workpiece Clamping: Manual Chuck: Röhm Tool Holder: Capto C8 Tool Magazines: 2 chain magazines Tool Positions: 2 x 47 Total Number of Tool Positions: 94 Maximum Tool Diameter: 120 mm according to the operating manual Maximum Tool Diameter: 150 mm according to the order confirmation with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Travel Paths X1-Axis Right Tool Carrier: 3200 mm X2-Axis Left Tool Carrier: 2800 mm Z1-Axis Right Tool Carrier: 1000 mm Z2-Axis Left Tool Carrier: 1000 mm Rapid Traverse X-Axes: up to 32 m/min Rapid Traverse Z-Axes: up to 20 m/min Workpiece Spindle Gear Reduction: 1 to 30 Maximum Speed: 100 min-1 Rated Speed: 36.7 min-1 Rated Power: 67.4 kW Short-Term Total Power: 202.2 kW Rated Torque: 52.65 kNm Maximum Drive Torque: 71.55 kNm Torque according to Order Confirmation: 67000 Nm at 40% duty cycle Motor Spindle Power according to Order Confirmation: 200 kW at 100% duty cycle Maximum Spindle Load Capacity including Chuck, Clamping Jaws, and Workpiece: 35000 kg Spindle Flange Diameter: 1900 mm Thrust Bearing Diameter: 1400 mm The workpiece spindle is designed as a water-cooled motor spindle with precision axial deep groove ball bearings. Tool Carrier and Multifunction Head The right tool carrier features a swiveling multifunction head with two Capto C8 holders for turning tools as well as drilling and milling tools. B-Axis for Stepless Positioning Swivel Range: 180 degrees Speed of Driven Tools: up to 6000 min-1 Tool Spindle Torque: approx. 120 Nm at 100% duty cycle Hydraulic Clamping Direct Measurement System Direct Coolant Supply High-Pressure Coolant Supply: up to 70 bar Tool Magazines Two chain magazines with 47 tool positions each Tool Holder: Capto C8 Maximum Tool Diameter: 120 mm Up to 150 mm with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Tool Cleaning with Blowing Air Manual Magazine Loading Coolant and Chip Disposal Two Knoll Chip Conveyors Type 600 S-2/120 Knoll Band Filter Type KF400-2300 Additional Equipment Röhm Chuck Spindle Cooling Hydac FLKS-4S Hydraulic Unit Hydac TBM20 Electrical Data Operating Voltage: 3 x 400 VAC Protection Class: IP55 Maximum Power Consumption: 280 kVA Component weight max.: 35,000 kg Weight approx.: 155,000 kg Rotation height max.: 2,100 mm Table diameter: 3,800 mm Swing: 3,800 mm Control: Siemens SINUMERIK 840D sl Dimensions (LxWxH) approx.: 15600 x 6000 x 6000 mm Year of construction: 2,020 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: excellent (used), Year of construction: 2010, operating hours: 32,300 h, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, nominal power (apparent): 11 kVA, controller manufacturer: Hurco, controller model: WINMAX, workpiece weight (max.): 340 kg, table width: 356 mm, table length: 762 mm, table load: 340 kg, overall weight: 2,900 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 32,300 h, spindle motor power: 11,000 W, spindle nose: CAT 40, number of spindles: 1, number of slots in tool magazine: 20, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, 2010 Hurco VM10 CNC Milling Machine with CAT 40 Spindle, WINMAX Control 2010 Hurco VM10 Vertical Machining Centre with WINMAX CNC Control, CAT 40 spindle, 20-tool ATC and premium software package. Good condition. Delivery throughout Ireland, UK & Europe. Manufacturer: Hurco Model: VM10 Machine Type: 3 Axis Vertical Machining Centre Year: 2010 Hours: 32,300hrs Control: WINMAX Condition: Excellent For sale is a 2010 Hurco VM10 Vertical Machining Centre in good working condition, equipped with the renowned Hurco WINMAX CNC Control (Version V08.01.04.33) and a CAT 40 10,000rpm spindle. Hjdpfoziu Hzsx Ac Tjt The Hurco VM10 is recognised worldwide as one of the most reliable and user-friendly vertical machining centres for precision CNC milling, toolroom machining, prototype manufacture, small batch production, mould making, and general engineering. With 32,300 machine hours, this machine remains an excellent opportunity for engineering companies looking for an affordable, high-quality used CNC machining centre from one of the industry's most respected manufacturers. Please note: No tooling is included with the machine. Technical Specifications Manufacturer: Hurco Model: VM10 Year: 2010 Machine Type: Vertical Machining Centre CNC Control: Hurco WINMAX Mill V08.01.04.33 Machine Hours: 32,300 Hours X Axis Travel: 660 mm Y Axis Travel: 406 mm Z Axis Travel: 508 mm Table Size: 762 × 356 mm Maximum Table Load: 340 kg Spindle Taper: CAT 40 Spindle Speed: 10,000 RPM Spindle Motor: 11 kW (15 HP Peak) Automatic Tool Changer: 20 Station ATC Rapid Traverse (X/Y/Z): 24 m/min Machine Weight Approx.: 2,900 kg Condition: Excellent Working Condition Tooling: No Tooling Included Installed WINMAX Software Options This machine is equipped with an excellent range of factory software options including: Advanced Verification Graphics DXF File Import NC Productivity Package Industry Standard NC Programming UltiPockets Rigid Tapping Helical Ramp Milling 3D Mold Package NC Conversational Merge Swept Surface Machining Select Surface Finish Quality These options significantly enhance programming flexibility, machining accuracy and production efficiency, making the VM10 suitable for both conversational programming and full ISO/G-Code machining. Notes: *Specifications are given in good faith but not guaranteed* Key Features Hurco WINMAX Conversational CNC One of the easiest CNC controls to learn and operate, allowing operators to quickly produce components without extensive G-Code programming. CAT 40 High-Speed Spindle The industry-standard CAT 40 spindle provides excellent tooling availability and rigidity for machining steel, aluminium, plastics, composites and engineering materials. 20 Station Automatic Tool Changer Fast automatic tool changes reduce machining time and improve production efficiency. Compact High-Performance Design Large machining travels combined with a compact footprint make the VM10 ideal for workshops where floor space is at a premium. High-Speed Precision Machining The 10,000 RPM spindle combined with rapid traverse rates enables efficient production while maintaining excellent surface finishes. Proven Hurco Reliability Hurco machining centres are recognised worldwide for their durability, ease of maintenance and excellent resale value. Machine Condition: Excellent Condition Fully operational Ready for immediate production No tooling included in sale Inspection welcome

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 135001, travel distance X-axis: 1,350 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine on time between September 21st and October 1st! TECHNICAL DETAILS Travel in X-axis: 1,350 mm Travel in Y-axis: 620 mm Travel in Z-axis: 810 mm Feed rate and rapid traverse Feed rate X/Y/Z-axis: 15 m/min Rapid traverse X/Y/Z-axis: 30 m/min Spindle Spindle speed: 12,000 rpm Spindle drive power: 10 kW (100% ED) Spindle drive power: 12 kW (40% ED) Spindle mounting: ISO 40 Spindle bearing diameter (front): 70 mm Spindle bearing diameter (rear): 60 mm Spindle operating hours: 6,510 h Distance from spindle to table: 90 – 900 mm Distance from spindle center to machine frame: 655 mm Tool magazine Tool magazine capacity: 40 Max. tool length: 300 mm Max. tool diameter with occupied neighboring positions: 80 mm Max. tool diameter with free neighboring position: 125 mm Work table Table length: 1,550 mm Table width: 620 mm Number of table slots: 6 Control system Control system manufacturer: HEIDENHAIN Control system model: iTNC 530 MACHINE DETAILS Input voltage: 400 V Input frequency: 50 Hz Input current: 63 A Rated apparent power: 35 kVA Dimensions and weight Overall length: 7,000 mm Overall width: 2,700 mm Overall height: 2,900 mm Machine weight: 8,650 kg EQUIPMENT - Dividing head, 4th and 5th axis, manufacturer WALTER, type TANIH 200 Hjdpfezqunuex Ac Tjt - LANG 5-axis clamping system - RENISHAW measuring probe - Chip conveyor - Documentation and manuals External reference: Wahl - Lot 69 Note: without the machine vice located on the clamping surface.

Condition: excellent (used), Year of construction: 2013, operating hours: 11,000 h, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 435 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 54 kVA, torque: 117 Nm, controller manufacturer: Fanuc, controller model: i Series, workpiece height (max.): 200 mm, workpiece diameter (max.): 300 mm, total height: 300 mm, total length: 2,465 mm, total width: 2,835 mm, table width: 200 mm, table load: 60 kg, rotary table diameter: 200 mm, overall weight: 5,500 kg, spindle speed (min.): 120 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 11,000 h, coolant supply: 20 bar, spindle nose: DIN40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 125 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 2013 Doosan DNM 200/5AX 5 Axis CNC Machining Centre Used 2013 Doosan DNM 200/5AX (4+1) 5-axis CNC machining centre with Fanuc i Series control, probe, tool holders, spindle chiller, transformer, swarf conveyor and only 11,000 run time hours. Manufacturer: Doosan Model: DNM200/5AX Machine Type: 5 Axis (4+1) Machining Centre Year: 2013 Control: Fanuc Series i Control Hours: 11,000 Run Time Hours Machine Description 2013 Doosan DNM 200/5AX CNC Machining Centre, a compact, high-performance 4+1 - 5-axis vertical machining centre ideal for precision engineering, toolmaking, aerospace, medical, motorsport, mould and die, and complex component machining. This machine is fitted with a Fanuc i Series CNC control and has only 11,000 run time hours, making it an excellent opportunity for manufacturers looking for a reliable used 5-axis machining centre with strong capability, premium features and valuable accessories included. The Doosan DNM 200/5AX is well known for combining compact footprint, rigid construction and 5-axis positioning. It is ideal for reducing setups, machining complex parts and increasing productivity compared with conventional 3-axis machining. Key Features 2013 Doosan DNM 200/5AX 4+1 5 Axis CNC Machining Centre Fanuc i Series Control Only 11,000 Run Time Hours Includes Renishaw OMP60 probe Includes tool holders Includes spindle chiller Includes transformer Includes swarf conveyor Compact 5-axis machining solution Ideal for complex component machining Technical Specifications Hjdpsy St Sdjfx Ac Tst X Axis Travel: 400 mm Y Axis Travel: 435 mm Z Axis Travel: 500 mm A Axis Travel: 150 Deg (+30 to -120Deg) C Axis Travel: 360 Deg Table Diameter: 200 mm Max Load on Table: 60 kg Max Workpiece: 300mm Dia x 200mm High Spindle Speed: 12,000 rpm Spindle Taper: DIN40 Pullstud: Nikken PS-806 Tool Capacity: 30 Station ATC Rapid traverse (X, Y): 36000mm/min Rapid traverse (Z): 30000mm/min Rapid traverse: (A - tilt axis) 20 rpm Rapid traverse: (C – rotary axis) 30 rpm Maximum feedrate: (X, Y, Z) 15000mm/min Maximum feedrate: (A, C) 7200 deg/min Feedback system: Absolute encoder Max Tool Diameter: 125mm Max Tool Length: 300mm Max Tool Weight: 8kg Spindle motor AC: 11/18.5kW Axis motor (XYZ): AC 4.0kW Axis motor (A axis): AC 3.0kW Axis motor (C axis): AC 1.6kW Power Requirements: 54.0 kVA Air Pressure: 6kgf/cm2 Machine Dimensions: 2465 x 2835 x 3091mm Approx. Machine Weight: 5,500 kg Run Time Hours: Approx. 11,000 hours Included With This Machine Renishaw OMP60 Probe Tool holders Spindle chiller Transformer Swarf conveyor Fanuc i Series CNC control Why Buy This Doosan DNM 200/5AX? This machine is a strong choice for companies searching for a used 5 axis CNC machining centre, used Doosan machining centre, Doosan DNM 200/5AX for sale, or compact 5-axis vertical machining centre. The 4+1 machining capability allows users to machine multiple faces of a component in fewer setups, helping to reduce handling time and increase production efficiency. With a compact table, high spindle speed and Fanuc control, this machine is particularly suited to small to medium batch production and complex prismatic parts. Applications This Doosan DNM 200/5AX is suitable for: Aerospace components Medical components Motorsport parts Toolroom machining Mould and die work General subcontract machining Complex 4+1 machining Notes: *Specifications are given in good faith but not guaranteed*

Condition: ready for operation (used), Year of construction: 2011, operating hours: 12,946 h, functionality: fully functional, travel distance X-axis: 935 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 650 mm, controller model: Heidenhain iTNC 530 HSCI, spindle speed (max.): 15,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 935 mm Travel range Y-axis: 850 mm Hsdpfx Aozwn Etjc Tjt Travel range Z-axis: 650 mm Number of axes: 3 Table length: 1,200 mm Table width: 850 mm Max. table load: 2,000 kg Spindle connection: HSK-A63 Spindle speed: 15,000 rpm Tool changer: 30-position Rapid traverse: 40 m/min Feed rate: 40,000 mm/min MACHINE DETAILS Control system: Heidenhain iTNC 530 HSCI Internal cooling: 40 bar / 23 liters/min Operating hours: 36,420 h Spindle hours: 12,946 h EQUIPMENT Chip conveyor

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, spindle speed (max.): 7,500 rpm, number of slots in tool magazine: 20, Equipment: chip conveyor, Haas VF1 Vertical Machining Centre,2011, table 660 x 356mm, trav 508 x 406 x 508mm, bt40, 20atc, 7,500rpm, rigid tapping , Liquid cooled, Chip conveyor Hsdpfx Aezwuryec Tet

Condition: used, Year of construction: 2019, travel -x axis 900 mm travel -y axis 200 mm travel -z axis 800 mm B-axis swival range ° positioning accuracy C: 9 '' control SIEMENS number of spindle speeds 0 - 6.000 CNC turning and milling center vertical | PITTLER - PV 315 The machine is in very good condition. Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Hsdox Szmvjpfx Ac Tet #Tags: PV315 | PV-315

Condition: used, Year of construction: 2019, chuck diameter 500 mm swing diameter over bed slide 700 mm control Siemens travel -x axis 630 mm travel -z axis 500 mm CNC turning and milling center vertical | EMAG - VMC 450 MT The machine is in very good condition. Hedpfxjx Szlro Ac Tot Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VMC450MT | VMC 450MT | VMC-450 | VMC-450MT

Condition: good (used), Year of construction: 2008, Ref. -No.: 10657 Manufacturer: EMAG Type: EMAG VTC 250 Year of construction: 2008 Type of control: CNC Control: Siemens Sinumerik 840D Storage location: Hakberstadt Country of origin: Germany Turning Length: 630 mm Tool Taper: VDI 40 Turret places: 1 Pcs Number of tool stations: 12 pc Turning Speeds: 5000 RPM Chuck diameter: 250 mm Further information: - The machine features an overhead drive spindle with a tailstock at the bottom. - Coolant tank, approx. 1,000 L, including - a paper filter roll. Hsdszkthgopfx Ac Tet - Clamping devices: Hainbuch clamping top, including various centering tips - Gripping devices on the turrets for feeding and removing raw and finished parts during magazine operation. - Magazine loading - Vertical pick-up lathe, which can generally be easily upgraded for automatic loading and unloading. The machine can be viewed while powered on by prior arrangement.

Condition: good (used), Year of construction: 2010, Ref. -No.: 10436 Manufacturer: SCHERER FEINBAU Type: VDZ 120 rechts Year of construction: 2010 Type of control: CNC Control: SIEMENS SINUMERIK 840 Storage location: Halberstadt Country of origin: Germany Machine-No.: 660XX Turning Speeds: 5500 RPM Swing Diameter: 260 mm Rapid Travel Speed X-Axis: 60 m / min Rapid Travel Speed Z-Axis: 30 m / min Travel -X Axis: 626 mm Travel -Z Axis: 250 mm Spindle bearing diameter: 32 mm Rated speed: 1200 1 / min Turret places: 12 Pcs Machine length: 1685 mm Machine width: 2400 mm Machine Height: 2850 mm Weight Of The Machine Ca.: 8 t Further information: Spindle head with short taper DIN 55026: A6 Pallet conveyor WPS KNOLL system (2010) SAUTER turret (12 places) Hsdpoy Ed A Hsfx Ac Tot Documentation available Tools in the pictures are sold with the machine. Machine can be inspected and demonstrated under power.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 550 mm, controller manufacturer: Siemens, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Number of axes: 4 Travel in X-axis: 2,000 mm Travel in Y-axis: 500 mm Travel in Z-axis: 550 mm C-axis rotation: 360° Control system: Siemens CNC Table length: 2,600 mm Table width: 550 mm Tool holder: ISO 40 Main spindle power: 22 kW Spindle speed max.: 12,000 rpm Positioning accuracy: 0.01 mm Travel speed: 667 mm/s MACHINE DETAILS Hjdpjzuw Aiofx Ac Tst Control system: Siemens CNC Connected power: 24 kW Dimensions & Weight Dimensions (L x W x H): 7,500 x 3,700 x 2,500 mm Empty weight: 9,600 kg Transport packages: 2 EQUIPMENT Documentation CE marking

Condition: used, Year of construction: 2004, operating hours: 28,082 h, travel distance X-axis: 800 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 520 mm, controller model: Siemens 840 D, spindle speed (max.): 13,000 rpm, The control unit (PCU 50) was replaced in March 2024! The machine spindle was replaced at approximately 5,500 operating hours! Tools are included in the offer! TECHNICAL DETAILS Travel range X-axis: 800 mm Travel range Y-axis: 620 mm Travel range Z-axis: 520 mm Spindle speed: 13,000 rpm Number of tool positions in the tool magazine: 30 MACHINE DETAILS Control unit: Siemens 840 D Operating hours Control unit operating hours: 60,150 h Machine operating hours: 56,860 h Spindle operating hours: 28,082 h Spindle replacement at: 5,500 h EQUIPMENT Tools 4th axis Hofmann RW/NC160 Oil mist extraction system Strip filter system with internal cooling 20 bar with double switching filter Documentation Hedelius + Siemens Sinumerik Infrared probe Renishaw Hsdpfxozvl Tfj Ac Tst Note: The sale does not include the milling attachments on the rear panel of the machine. Since the machine has been demonstrated several times, the machine operating hours may vary slightly.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, HURCO VM10i VERTICAL MACHINING CENTRE Hsdpfx Acszwwndo Tet Year: 2015 Axis X 660 mm Axis Y 406 mm Axis Z 508 mm Rotary table (4th axis) no Type of CNC Table length 762 mm Table width 406 mm Max. part weight 340 kg Number of tool pockets 20 Spindle taper Max. spindle speed 10000 rpm Spindle motor power 11 kW