Used Vertical Turning Machine for sale (93,625)

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Technical details max. workpiece diameter 400 mm workpiece length - max. 300 mm Control SIEMENS 840Dsl swing diameter 520 mm chucking diameter 500 mm travel x / y / z 995/+,-30/580 mm Additional information Operating hours (total): 1848 hours 1.2.2 BASE TURRET UNIT AND Y-AXIS SLIDE UNIT The Y-axis slide unit is mounted on the side of the machine base. A fast-reacting, position-controlled, and maintenance-free servo motor is used for the axis drive. It drives the slide via a high-precision ball screw. A linear measuring system is built into the Y-axis. Positional accuracy: 2 µm. BASE TURRET UNIT Shortest swivel times thanks to direct swivel drive, cooled for consistent accuracy. MAIN SPINDLE 37.7 KW 1.2.3 HP TURRET DRIVE UNIT FOR DRIVED MACHINE TOOLS (C442) With internal coolant supply to the tool.* Max. speed 6,000 rpm Crosscut speed 3,200 rpm Torque at 100% duty cycle 54 Nm/18.1 kW Torque at 40% duty cycle 83.6 Nm/28.0 kW Fedpfjw Hxuaex Ad Njpp Torque at 10% duty cycle 100 Nm/33.5 kW 1.2.4 TOOL CARRIER UNIT FOR DRIVED TOOLS TOOLS, 12xBMT75 for BMT75 tool holders 1.2.6 ROTATING WORKPIECE TRANSPORT SYSTEM, O-TYPE Drag frame system for 10 workpieces Max. workpiece height (including workpiece pallet) 300 mm Max. workpiece weight 60 kg 1.2.7 SET (10 pieces) DRAG FRAME for O-type belt For workpiece diameters 150 - 400 mm 1.2.8 BLOW-OFF OF THE WORKPIECE AND THE CLAMPING DEVICE (PICK-UP) 1.2.10 COOLANT SUPPLY 15 bar Coolant pump flow rate approx. 80 l/min at 15 bar. COOLING UNIT (6.5 kW, water-air) A cooling unit (with dual-circuit technology) regulates the machine's thermal balance. The spindle drive, control cabinet, and turret are kept at ambient temperature (10°C - 40°C). Cooling capacity: 6.5 kW 1.2.11 COOLANT DOUBLE FILTER, MANUALLY SWITCHABLE Filter fineness 100 µm, with electrical and mechanical contamination indicator 1.2.12 CHIP CONVEYOR, HINGED BELT VERSION - REAR-FACING Chip discharge height 1100 mm. /With integrated coolant reservoir, capacity approx. 500 l. 1.2.13 EMULSION MIST EXTRACTION Extraction capacity approx. 800 m3/h 1.2.14 FLUSHING GUN 1.2.16 WORKPIECE MEASUREMENT with a measuring probe that is completely protected from chips and coolant outside the work area. 1.2.17 BLOW-OFF PROBE 1.2.19 ENGRAVING SOFTWARE PACKAGE 1.2.20 TOOL LIFE MONITORING - SISTER TOOL MANAGEMENT 1.2.21 TOOL BREAKAGE MONITORING TOOLINSPECT MCU - EUROPE (SIEMENS 840DSL, FANUC 31i/32i) 1.2.23 3-COLOR INDICATOR LIGHT 1.3.2 AXIAL DRILLING AND MILLING HEAD - BMT75 CC 1.3.3 ANGLE DRILLING AND MILLING HEAD 90° - BMT75 CC (i=1:1) 1.3.4 TOOL SET FOR OP10 + OP20 1.3.7 HYDRAULIC FULL-CLAMPING CYLINDER SIZE 150 - with 1 media feedthrough The coolant is supplied to the workpiece through the main spindle and the clamping device. 1.3.10 3-Jaw Power Chuck KNCS-N 500-155 Quick Change n max. = 2200 rpm (Recommended speed according to DIN 6386) - Set of hard base jaws - Set of soft top jaws 1.3.11 Attachments for KNCS-N 500-155 Consisting of: - Chuck flange DIN 55026 A11 - Drawbar adapter with through-hole and shut-off valve for central air or coolant supply - Mounting screws 1.3.12 Irrigation nozzle in chuck bore Additional tool holders with tools

Condition: used, Year of construction: 2014, Control Siemens 840DSL max. swing diameter 420 mm max. turning height 300 mm max. turning speeds 3400 min/-1 drive capacity - main spindle 45 / 35 kW max. torque 775 / 600 Nm chucking diameter 315 / 400 mm number of tool places 12 Pos. Shank diameter 40 mm x-axis 850 mm z-axis 315 mm rapid traverse (x/z) 45 / 30 m/min weight of the machine ca. 10,0 t dimensions of the machine ca. 4,2 x 1,5 x 3,5 m In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Technical features: - driven tools - c-axis - Capacity for pieces diameter 30 to 160 mm : 32 [pos] - Capacity for pieces diameter 120 to 220 mm : 24 [pos] Fsdpfxjxuv T Ts Ad Nspp - Capacity for pieces diameter 120 to 340 mm : 16 [pos] The scope of delivery of the machine does not include a clamping device. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: ready for operation (used), Year of construction: 2021, Control Unit Brand SIEMENS Model SINUMERIK 840 D sl Additional Equipment Measuring System: Linear in both axes This 5-axis Pittler PV2500 was manufactured in 2021, featuring a CNC vertical lathe with a maximum swing diameter of 3,000 mm and a turning diameter of 2,800 mm. It includes a double tool holder with Capto C8 interface, high-pressure coolant capabilities, and a robust spindle supporting up to 25,000 kg load. Ideal for complex, large-scale machining tasks. If you are looking to get high-quality turning capabilities consider the Pittler PV2500 machine we have for sale. Contact us for more information. Fodpsxuw Aiefx Ad Nspp Application Types Turning

Condition: used, Year of construction: 2007, turning diameter 600 mm swing diameter 680 mm turning height 600 mm z-axis 500 mm x-axis 560 mm drive of main spindle 65/80 kW main spindle speeds: 2800 workpiece tool changer 12 Plätze feeds z-axis 0,01-30.000 mm/min feeds x-axis 0,01-45.000 mm/min Fjdpfxov Rrq Do Ad Nopp chuck Rota NCR 630 mm voltage 400 V frequency 50 Hz control Siemens 840 D pl total power requirement 140 A weight of the machine ca. 18 t dimensions of the machine ca. 6,5 x 3,8 x 4,20 m

Condition: used, Year of construction: 2014, max. turning diameter 160 mm max. turning height 150 mm max. workpiece diameter 100 mm max. workpiece height 150 mm max. turning speeds 6.000 U/min travel -x axis 700 mm travel -z axis 375 mm c-axis 360 ° control FANUC Vertical Turning Machine | EMAG - VL2 equipped with a workpiece conveyor belt. The machine is in very good condition. Please note that the technical details were added from comparable machines. Fpodsqvd Iuopfx Ad Nop - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2

Condition: used, Year of construction: 2002, turning diameter 1000 mm swing diameter 1250 mm turning height 1000 mm Control Siemens 840D total power requirement 110 kW Fedpfxexfwgps Ad Nspp weight of the machine ca. 25 t

Condition: used, Year of construction: 2018, turning diameter max. 3.800 mm diameter of spindle flange 1.900 mm max. swing diameter 3.800 mm control 840 D sl Siemens turning speed range - main spindle max. 100 min/-1 power capacity - main spindel 200 kW max. Torque 67.000 Nm gear box 1:30 tool taper Capto C8 swivellable B: 0 - 270 ° Spindle speed - driven tool pos. max. 6.000 min -1 max. Torque 120 Nm tool taper Capto C8 number of toolpositions 41 pos. max. tool weight 20 kg max. tool length 400 mm max. tool diameter 120 mm 0 125 mm tool taper Capto C8 number of toolpositions 25 pos. workpiece diameter at full load 150 mm Fpedpfsxap Dpjx Ad Nep max. tool weight 20 kg max. tool length 400 mm x-axis 1: 2.800 mm x-axis 2: 3.200 mm z-axis 1.000 mm rapid traverse X: 32 / Z: 20 m/min feed power X/Z: 22 kN total power requirement 250 kVA weight of the machine ca. ca. 30 t dimensions of the machine ca. 10,4 x 6,3 x 5,7 m CNC - Double-Spindle-Vertical-Lathe PITTLER - PV 4000 - Control Expansion / Software SINUMERIK 828D/840D SL ProgramSYNC Software Option - Retractable Foot Guards - Coolant Circulation - Oil Hose Skimmer - SIEMENS Safety Integrated - Network Interface / Data Transfer DNC Option - Remote Diagnostics for the NC Area - Teleservice for the integrated PLC of the Sinumerik 840 D - Ethernet connection in the control cabinet - Variable speed range to prevent vibrations - Air purifier, electrostatic separation - Measuring probe for in-process workpiece measurement - Walk-in work area

Condition: used, Year of construction: 2015, swing diameter 420 mm chucking diameter 400 mm x-travel 900 mm z-travel 495 mm spindle tunring speed 3.100 U/min number of tool places 12 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope Fjdpewqr S Tofx Ad Nepp of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: ready for operation (used), Year of construction: 2018, Control Unit Brand SIEMENS Model SINUMERIK 840 D sl Fpedpfxsxuw Apj Ad Nep This 4-axis Pittler PV4000 was manufactured in 2018. A robust vertical turning machine, it features a max swing diameter of 3,800 mm and a spindle load capacity of 35,000 kg. It includes a Siemens SINUMERIK 840 D sl control system, rapid traverse speeds up to 32 m/min, and a tool magazine with 25 positions. Consider the opportunity to buy this Pittler PV4000 vertical turning machine. Contact us for more information about this machine. Application Types Turning

Condition: excellent (used), Year of construction: 2009, swing diameter 1400 mm faceplate diameter 1250 mm Control SIEMENS work height max. 1100 mm table load 6 t total power requirement 80 kW weight of the machine ca. ca. 40 t Crossbeam travel: 700mm Crossbeam support Travel from centre of rotation to the right: 700mm Crossbeam support Travel from centre of rotation to the left: 700mm Fsdpfsud Ix Ejx Ad Nepp Machine table drive Main drive power: 80kW Number of gearboxes: 2 Step change: 3.84 Speed range of the 1st gear stage: 2-32-139 rpm Speed range of the 2nd gear stage: 9-125-500 rpm Max. Machine table load: 6 tonnes Feed drive Cross beam support Horizontal feed speed: 0.1 - 8 m/min Cross beam support Vertical feed speed: 0.1 - 8 m/min Cross beam support Rapid traverse speed horizontal/vertical: 8 m/min Cross beam adjustment speed: 425 mm/min Tool system Tool system: 180.1 Cutting force on the turning tool: 30 kN The machine enables additional drilling and milling via an integrated milling unit in the tool change system.

Condition: used, Year of construction: 2014, max. turning diameter 160 mm max. turning height 150 mm max. workpiece diameter 100 mm max. workpiece height 150 mm max. turning speeds 6.000 U/min travel -x axis 700 mm travel -z axis 375 mm c-axis 360 ° control FANUC Vertical Turning Machine | EMAG - VL2 equipped with a workpiece conveyor belt. The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2 Fsdpsqvd Iqofx Ad Nopp

Condition: excellent (used), functionality: fully functional, JUNGENTHAL KE-1200 VERTICAL BORING MILL MAX. SWING: 1300 MM MAX. HEIGHT: 1000 MM Fsdpfxsxlafze Ad Nepp COMES WITH ELEVATING RAIL AND SIDE RAM

Condition: used, Year of construction: 2021, turning diameter max. 2.800 mm diameter of spindle flange 1.100 mm max. swing diameter 3.000 mm control 840 D sl Siemens turning speed range - main spindle max. 230 min/-1 power capacity - main spindel 206 kW max. Torque 53.000 Nm tool taper Capto C8 swivellable B: 0 - 270 ° Spindle speed - driven tool pos. max. 6.000 min -1 max. Torque 120 Nm tool taper Capto C8 Fodjxap Dcjpfx Ad Nepp number of toolpositions 41 pos. max. tool weight 20 kg max. tool length 400 mm workpiece diameter at full load 150 mm tool taper Capto C8 number of toolpositions 25 pos. workpiece diameter at full load 150 mm max. tool weight 20 kg max. tool length 400 mm tool taper Capto C8 x-axis 1: 2.700 mm x-axis 2: 2.700 mm z-axis ((((2x 1.000 mm rapid traverse X: 40 / Z: 24 m/min feed power X/Z: 22 kN total power requirement 200 kVA weight of the machine ca. ((((ca. 30 t dimensions of the machine ca. 10,4 x 6,3 x 5,7 m CNC - Double-Spindle-Vertical-Lathe PITTLER - PV 2500 - Control system expansion / software SINUMERIK 828D/840D SL ProgramSYNC software option - Retractable step guards - Coolant circulation system - Oil hose skimmer - SIEMENS Safety integrated - Network interface / data transmission DNC option - Variable speed range to prevent vibrations - Air cleaner, electrostatic precipitator - Touch probe for in-process workpiece measurement - Walk-in work area

Condition: used, Year of construction: 2012, turning diameter 320 mm turning height 750 mm Control Siemens max. turning speeds 4500 min/-1 drive capacity - main spindle 26,8 / 20,9 kW max. torque 256 / 200 Nm spindle bore 52 mm spindle head KK A6 (DIN 55026) chucking diameter max. 315 mm number of tool places 8 Pos. tool taper Capto C5 max. workpiece diameter 50 mm max. workpiece weight 0,5 kg Fpjdpfx Aexq Hkzed Njp x-axis 450 mm z-axis 300 mm rapid traverse x 45 / z 40 m/min total power requirement 68,3 kW weight of the machine ca. 11,0 t dimensions of the machine ca. L 3,7/4,2 x B 1,6 x H 3,0 m In our opinion, the machine is in very good condition condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: ready for operation (used), Year of construction: 2016, operating hours: 18,071 h, General Data Machine weight 6000 kg Main Drive Number of axis 3 Media Main electronic connection 40 kVA Fodpfx Adexrwhye Nspp Additional Equipment shopturn option This 3-axis DMG MORI Gildemeister CTV 250 2nd was manufactured in 2016. Ideal for precision vertical turning, this machine maintains robust construction and reliability. If you are looking to get high-quality turning capabilities, consider the DMG MORI Gildemeister CTV 250 2nd machine we have for sale. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 1993, swing diameter 1400 mm faceplate diameter 1500 mm Control Sinumerik 850T Fpedpfx Aovxa Tpod Njp work height max. 1400 mm Tool changer 12 stck. workpiece weight 5 t YEAR OF CONSTRUCTION: 1993 Mechanical overhaul: 2010

Condition: good (used), Year of construction: 1998, table diameter 1800 mm turning diameter 2060 mm swing diameter 2000 mm work height max. 1557 mm power capacity - milling spindle 30 kW workpiece weight 12 t table drive 100 kW Fedpfjw H Dkmjx Ad Nspp gear box 2 Stufen grinding spindle drive 30 kW milling spindle SK50 with Grinding device

Condition: used, Year of construction: 2012, turning diameter 140 mm turning length 630 mm control Siemens 840 SL max. swing diameter over bed 250 mm turning speed range - main spindle 0 - 5000 min/-1 max. torque 256 Nm spindle bearing diameter 110 mm spindle bore 52 mm spindle head Gr. 6 DIN 55026 chucking diameter max. 250 mm number of tool places 3 x 12 Pos. tool taper VDI 40 max. tool weight 20 kg max. tool diameter 40 mm max. tool length 95 mm max. workpiece weight 20 kg max. workpiece diameter 140 mm x-travel 300 mm z-travel 740 mm rapid traverse x 45 / z 30 m/min total power requirement 70 kW weight of the machine ca. 25,0 t dimensions of the machine ca. 6,5 x 3,5 x 4,4 m In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical features: - Siemens S120 drive systems - 3x turret, all places AGW, 2x of them with y - axis - 2x main spindle, 1x with tailstock - Spindles total 5 pcs. - Tool monitoring, Artis - Total electronic axes: 21 pcs. Accesories: Fpjdpfsxqrgzox Ad Nep - chip conveyor - Radio probe, Renishaw - Cooling unit - Infeed and outfeed conveyor - suction There are 2 identical machines available. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: ready for operation (used), Year of construction: 2014, operating hours: 48,973 h, Control Unit Brand SIEMENS Model 840 D Main Drive Tool taper IMS 76 Fodpfxsxpytgs Ad Nspp Number of axis 3 This 3-axis DMG MORI CTX Beta 800 4a was manufactured in 2014. It features a Siemens 840 D control system, a counter spindle, and a bar machine package for enhanced versatility. The machine includes a 980-liter coolant system and a hinge type conveyor for efficient operation. If you are looking to get high-quality turning and milling capabilities, consider the DMG MORI CTX Beta 800 4a machine we have for sale. Contact us for more information about this machine. Application Types Turning

Condition: good (used), Year of construction: 1999, control SINUMERIK 840D spindle head Ø 640 mm Fpodswzmqxepfx Ad Nop turning length 1000 mm

Condition: ready for operation (used), Year of construction: 2005, Main Drive Number of spindles 1 Spindle speed range 4000 Spindle motor power 22/15 kW Tool taper VDI 40 Number of axis 2 Fodjxtgnfspfx Ad Njpp Movement X-Axis Rapid Traverse 60 m/min Z-Axis Rapid Traverse 30 m/min Workpiece Workpiece drm 280 mm Workpiece X 320 mm Tools Number of index 12 This Okuma LVT 300 was manufactured in 2005. A robust vertical turning machine featuring a max. turning diameter of 280 mm and a swing diameter of 320 mm. It offers a rapid traverse rate of 60 m/min on the X-axis and 30 m/min on the Z-axis, with a turning speed range up to 4000 U/min. Ideal for efficient, precise operations, the machine includes 12 tool positions. A great opportunity to buy this Okuma LVT 300 vertical turning machine. Contact us for more information. Application Types Turning

Condition: good (used), Year of construction: 2006, control Rexroth Fpsdpfxowzmrio Ad Nop

Condition: ready for operation (used), Year of construction: 2002, General Data Machine weight 76000 kg Control Unit Brand SIEMENS Model 840D Main Drive Fpsdpfx Ajwkxfyjd Nsp Spindle motor power 60 kW This 5-axis DÖRRIES SCHARMANN VCE2000/180MC-FC CONTUMAT was manufactured in 2002. It features a table diameter of 1800mm, a swing of 2000mm, and a working height of 2451mm. The machine supports a maximum table load of 12 tonnes and offers a main drive motor of 60Kw. Ideal for complex vertical turning tasks, consider the opportunity to buy this DÖRRIES SCHARMANN VCE2000/180MC-FC CONTUMAT vertical turning machine. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2012, operating hours: 35,385 h, Control Unit Brand SIEMENS General Data Machine weight 5500 kg Main Drive Spindle speed range 7500 Number of axis 3 Fpsdsxa H Thopfx Ad Nop Movement X-Axis Movement 400 mm Z-Axis Movement 200 mm Turret Number of turrets 1 Tools Number of station 12 Type of tool holder VDI 40 Media Internal cooling Yes Additional Equipment Tool Storage: Conveyor belt for max. 27 workpieces Workpiece Feed: Vibratory spiral conveyor, vibrating plate, single workpiece feed Handling Robot: 8-axis Protective Enclosure: Robot cell Scraper Belt Conveyor Oil Mist Extraction Cooling System: Cooling capacity 3 kW Chip Container: 700x700x600 mm It's System of 2 EMAG VL03 vertical turning machines that were manufactured in 2012 and 2010. It features a Fanuc control system, Series 32i-Model A, with a travel range of 400x200mm and a spindle speed of up to 7,500 rpm. The system machine includes a 12-station tool turret with VDI 40 tool holders and a tool drive of 6,000 rpm. Consider the opportunity to buy this vertical turning machine system with robot included. Contact us for more information about this system. Application Types Turning

Condition: ready for operation (used), Year of construction: 2012, operating hours: 38,984 h, Control Unit Brand SIEMENS Model DGM ERGOline Main Drive Number of axis 4 Media Chip conveyor Yes Fpjdpfx Aexpywxsd Nsp This DMG GILDEMEISTER CTV 250 Vertical lathe machine was manufactured in 2012 in Germany and has 38984 production hours. It is equipped with a SIEMENS control unit. The machine dispose of a chip conveyor and a high pressure cooling system with paper filter. The revolver head was completely renewed at the end of the previous year. Application Types Turning