SOLD - Sold
Used KARDEX paternoster, fully installed and in working condition in your warehouse. Used CLEANROOM table : Kardex Type : Industriever Model : SYS-351-1316.5 Series no.: 01.004450/001 Year : 2001 Height : 3700 mm Width : 3070 mm Depth : 1760 mm + 300 mm extension Number of boxes : 13 pieces Useful width box : 2500 mm Useful height box : 370 mm Useful depth box : 620 mm Max. load per box : 350 Kg Max. Total weight : 4190 kg Max. imbalance : 700 kg Connection voltage : 380 Volt Power ...
Used paternoster system
Inspections and maintenance were fulfilled every year.
construction height: 5,00 m
fabric width: 3,00 m
Depth: estimated approx. 2.00 m
Bhroo9udu3
capacity: 67 rolls
Load capacity per roll 100 KG
Total load: 4,000 KG
Max. diameter per roll: 300 mm
Construction: Solid steel frame construction
in special device stress-free
welded. All load carrying devices
dimensioned for 10-fold safety.
Control: Main switch or emergency stop switch
Position controlled ...
Make: KARDEX INDUSTRIEVER, Type: SYSTEM-250-3015-15, Ser-No. 192/38862, permissible total payload 6,960 kg, permissible shelf load 232 kg, unload max. 1,000 kg, base area without shelf, each 1,200 x 3,000 mm, H 6,500 mm, each 26 shelf supports á 2 levels
Item 225, No. 67
By order of the entitled persons we sell a tool paternoster from KARDEX INDUSTRIEVER.
O7yel
The general terms and conditions of Lüders & Partner GmbH apply.
A Kardex Shuttle NT 500 from 2000 in great secondhand condition.
The unit is fully functional with all electronics and the control panel in great condition.
Heigth: Flexible from 3 500 mm up to 7 800 mm
Width: 2 180 mm
Depth: 3 130 mm
Tray size: 1 850 mm x 813 mm
Number of trays: 52
Maximum load capacity per tray: 400 kg
O83qd
Sold including disassembly but excluding shipping.
Available from July 2021.
Gmatick Storage Paternoster (roll rack)
The foil storage Paternoster foils is suitable to use for the storage of all 3D-films, it is used as a high storage at the membrane press or as a space-saving storage solution for the 3D foils.
With our Paternoster you can storage on very small area approximately 2, 4m x 1, 2m a lot of film rolls (up to 32 rolls of a Ø 300 mm). The required film is thus immediately available at the push of button. Our Paternoster are available from 2.8 m up to 6, 0 m as ...
Storage paternoster, Electrolux, 300kg / gondola, height approx. 5.10m - second-hand -:
Price: only 11.995.-€ (net), disassembled and loaded!
Manufacturer: Electrolux / Constructor
Type: IPN 7000
Year of manufacture: 1995
Unit dimensions:
Height: approx. 5,10m
width: approx. 3,44m
Depth: approx. 1,40m plus 0,30cm deposit table
Number of nacelles: 20
Gondola dimensions: 2740mm x 420mm with one intermediate shelf each
S8dlnx
max. load per gondola: 300kg - or with intermediate shelves = 150kg p...
7 pieces storage paternoster Logimat, year 2007, height 8.815 mm, width 2.765 mm, depth 3.270 mm, number of shelves 82 pieces, different shelf heights 100 - 300 mm, load capacity per shelf 400 kg, total load capacity 40.000 kg. Colours RAL 9010 RAL 1018, steel construction and shelves electrogalvanized, operating opening stainless steel polished. Top condition, constantly checked and maintained. Price VB.
Yjsns
We have 2 SYS 252 equipment of the Paternoster type.
Ctadgbm0m
They are equipped with 33 trays each and are in good mechanical and external condition.
Paternoster system (6 pieces available)
4 pieces Overall height: 2.60 m
Fabric width: 4.00 m (total approx. 4.85 m)
Depth: 1,00 m
Capacity roll: Ø 300 mm = approx.11 pieces
2 pieces Height: 3,60 m
Fabric width: 4.00 m (total approx. 4.85 m)
Depth: 1,00m
Capacity roll: Ø 300 mm = approx.16 pieces
Details:
Machines are inspected, tested and given a test seal before sale.
Bfhyihduqb
Dismantling is carried out by a specialist company.
The machine complies with the Operational Safety Ordinance...
A Kardex Remstar Shuttle XP 500 from 2006 in very good secondhand condition.
Height: 8 100 mm
Width: 2 050 mm
Gjpkp02lu
Depth: 2 920 mm
Tray size: 1 650 mm x 813 mm
Number of trays: 54
Load capacity per tray: 420 kg
Sold including disassembly but excluding shipping.
Available from July 2021.
Warehouse lift LRK-500-2450x813
30 trays
Required room height 7570 mm
However, the machine can also be built lower. 500 mm steps
Trays
Gw9xdc
Standard Medium trays
Total number 30 pcs.
Max. Max. load per shelf 370 kg
Shelf height 53 mm
Clear shelf width 2,450 mm
Clear tray depth 813 mm
Storage area per tray 1.992 m²
HSD250
Power frequency converter 5,5 kW
Power consumption max. 8.6 kVA
Rated frequency 50/60 Hz
Supply voltage 3/N/PE 400
Recommended mains fuse 25 A
Mains current 17 A
Supply cable ...
2 pieces storage paternoster, Kardex, 640kg / gondola, height approx. 5,95m - second-hand -:
Price per unit: only 13.995.-€ (net), disassembled and loaded!
Manufacturer: Kardex
type: SYS-652-4014-108
year of construction: 1997
Machine dimensions:
Height: approx. 5,95m
width: approx. 3m
Depth: approx. 1,60m plus 0,30cm storage table
Number of gondolas: 23 (one unit with 12 shelves, one unit with 13 shelves)
gondola dimensions: 2500mm x 520mm
max. load per gondola: 640kg
average load per gondo...
Dispensing machine to have control of industrial supplies and personal protective equipment or PPE.
It has 18 fully configurable columns depending on the needs.
Management software G-BOX included.
Dimensions:
Btn2had8n2
Height: 1866mm
Width: 1030mm
Depth: 1030mm
The following offer is for sale:
For roll storage
Technical data:
Machine: Paternoster carousel rack
Height: 2,20 m - 5,90 m (other sizes on request)
Fabric width: 2.0 m - 5.0 m
Connection: 400 V / 16 A
Control: Key switch
Hgywphiy8
Safety precaution: Protective grille on front / chain guard
Gondola: 14 pieces - depending on height
[...]
[...]
General Information:
Are you looking for a carpet paternoster? We have used - generally overhauled - plants of all current types and manufacturers in...
Megalift FSE 7.1 2244/816-9010 Year of construction 2007
Dimensions W/D/H in mm 2632, 2930, 9010
(The machine can be individually adapted to your room height)
Useful area carrier WxD in mm 2244x816 corresponds to 1.83sqm/carrier
payload425kg/carrier optional 650kg/carrier
Colour RAL 7035 light grey
Number of basic carriers 40, more if required
unit is "checkbook" maintained
Bryipikvie
Special equipment: sliding door, emergency stop left
Unit is delivered with 1 year warranty for end customer
Tra...
We are selling our storage lift KARDEX SHUTTLE 2300 x 825 NT which is still in operation.
Load capacity per compartment approx. 150 kg
Brnwvcaogt
Compartments approx. 25 pcs.
Height 4900 mm
The machine can be inspected under power at any time.
The machine is in our spare parts warehouse daily in operation.
Price without transport
Price without assembly
Machine is sold only with assembly!
The frequency converter was converted to a new generation approx. 3 years ago.
Available from week 19/2021
Lift systems, Megamat, height 5.70m, approx. 318kg / tray, dimensions per tray: approx. 1.60m x 0.8m - second-hand -:
Bsf7rggkwv
Price ex location: only 15.950.-€ (net), disassembled and loaded!
Assembly costs by a specialist company: approx. 4. - 5.000.-€ (net), depending on the assembly location, plus position of forklift truck.
Manufacturer: Megamat
Type: Megalift FSE 3.5
Year of construction: 2004
height = 5,7 m x width = 2,0 m x depth 2,9 m
dimensions per tray: approx. 1,65m x 0,82m
Number ...
We have 1 SYS 502 Rotary type equipment
Construction height: 6350 mm
Construction width: 3100 mm
Bqcgoox22e
Build depth: 1600mm + 300mm counter
Year of construction: 1993
Number of compartments: 44 trays
Shelf load: 350kg
Tray width: 2500 mm
Tray depth: 520 mm
Shelf height: 200 mm
The device has already been dismantled and is in our warehouses.
Unit width: 3700 mm
Unit depth: 1780 mm + 450 mm shelf
Unit height: 3660 mm
Number of compartments: 12 + 8 shelves
Load capacity per compartment: 350 kg
Shelf width: 3005 mm
Bromon909x
Shelf depth: 600 mm
Shelf height: 410 mm
Power supply: 380 V
Disassembled, palletized, stored.
Megalift FSE 3.5 1836/816-5010 Year of construction 2006
Dimensions W/D/H in mm 2300, 2750, 5010
Useful area carrier WxD in mm 1836x816 corresponds to 1.49sqm/carrier
Load capacity 290kg/carrier
Colour RAL 7035 light grey
Number of basic carriers 25, more if required
unit is "checkbook" maintained
Special equipment: sliding door, emergency stop left
Unit is delivered with 1 year warranty for end customer
Bryipikvie
Transport and assembly included
Tests according to DGUV 108-007 / DGUV V3 by qual...
Type: 1056/305/17
Instrument no:12726
Year:2001
unit height: ca.3320 mm
unit width: ca.3280 mm
unit depth: ca. 1430 mm +300 mm table top
Number of shelves: 17
Shelf width: approx. 2890 mm
Shelf depth: approx. 520 mm
Shelf height: approx. 300 mm
Shelf load: 150 kg
Grvpuj9
total load: 2550 kg
Control : MM 235
colour: beige
Still 2 of 3 x lift systems, Kardex, height 9,40m (can be shortened), approx. 200kg / tray, dimensions per tray: 0,82 x 1,25m - second-hand -:
FIXprices!! Since these prices are already very favorable, the prices are understood as FIX!
Price per unit: only 13.995.-€ (net), disassembled and loaded!
For an extra charge, higher surrounds (see photos) are also available!
Manufacturer: Kardex
Type: Shuttle 1250x825, resp. Shuttle 1250x825x9400
Year of construction: 1 x 1993, 2 x 1994,
Height: ca. 9,4...
modernized machine with new control LTG-StoreControl Basic
Control extension to Extended version optionally possible
Nor0l
only 1 of formerly 2 identical paternosters are still available
external dimensions:
overall height 8050 mm
construction width 3500 mm
Depth 1760 mm
32 carriers with 225 kg load capacity each
in the clear useful dimensions:
H = 4250 mm
W = 2870 mm
T = 630 mm
Chain jump 457 mm
Storage table in 1000 mm above OKFF with worktop with corrugated rubber ESD
colouring light/dark gre...
Vertical carousel Storage lift Paternoster
Length: 13,7m
width: 6,4 m
height: 5,60 m
Dead weight: approx. 60.000 kg
57 gondolas of 5.2 m length each, loadable with 3300 kg each.
Total approx. 159,600 kg
For storage of e.g: Tools, metal, cable reels, tyres etc.
Brgbu83luq
The plant is dismantled, is located in 77855 Achern.
The assembly by us is possible, WITHOUT electrical connections!
Goods lift Gebhardt 145.1
Exit height 210mm
Gwnw0o
Interior width 1 x 1 m
Load capacity 500 kilos
There are two of them.
Price per piece for self dismantling
Construction width: 3460 mm
depth: 1700 mm + 400 mm shelf
Broluqjrra
Overall height: 4860 mm
Number of compartments: 16 + 16 intermediate shelves
Shelf load: 200 kg
Shelf width: 2950 mm
Shelf depth: 620 mm
Shelf height: 420 mm
Unit has already been disassembled.
Gebhardt freight elevator / type 146.2 / year of construction 2001 / lifting capacity 980kg / inner height 2.000mm / very good conditions
Dimensions cabin width (not yet available)
Exit heights / height of the shelves 3.200mm and 6.300mm
Be3t0smeyc
Total height approx. 8.500mm
Elevator A with 2 x exits at the back / entrance at the front
Motor mounting top / lateral
Fully functional warehouse lift in excellent condition. Dismantling and collection at own expense.
Equipment No. : 16134
Bqn8zssnr8
Last inspection : 2019
Storage paternoster, Kardex, 400kg / gondola, height approx. 9.40m - second-hand -:
Construction site price:
Price: only 14.500.-€ (net), dismantled and loaded!
Manufacturer: Kardex
Type: SYS-651-3518-130
Year of construction: 1997
Device dimensions:
Height: approx. 9.40m (exact height to be determined)
width: approx. 3,67m
Depth: still to be clarified (should be about 1,90m - 2m)
Number of nacelles: 35
V3zvfj
Gondola dimensions:
Depth: approx. 65cm
width: approx. 3,04m
height: approx. 40c...
900994 Paternoster system ZAMBELLI type Cargo 2503,
2ijhco0jh
Carousel, total approx. LWH 4200 x 1800 x 5600 mm,
Compartment size: 3500 x 600 x 170 mm,
20 shelves with 2 compartments each,
Permissible shelf load: 160 kg
Geraetenr: 95.003231/001 Unit height: 10,000 mm device width: 1580 mm depth: 2680 mm shelf number: 52 shelf depth: 830 mm shelf length: 1320 mm total load: 2 x 5000 kg shelf load: 200 kg
Colour: light grey
Bbv7mxgbmu
Manufacturer: Kardex
Type: horizontal carousel
Year of construction: 2011
Load capacity per compartment: 90 kg
System dimensions (area):
Height: 2.6 m
Width: 2 m
Depth: 20m
Number of baskets per carousel: 32 baskets
Dimensions of the storage spaces or baskets:
Height: 2,159mm
Width: 960mm
Depth: 610mm
There are 6 intermediate levels installed per basket
Condition: like new
Oskop
Available now
construction width: 2650 mm
construction depth: 1160 + 300 mm
construction height: 2300 mm
Number of subjects: 14
Shelf load: 100 kg
shelf width: 2200 mm
shelf depth: 325 mm
shelf height: 240 mm
Bloeng72u7
Number of rolls: 48, length: 6700mm, width: 4000mm, height: 2800mm.
Nmntr
In the field of 3D Thermoforming, we also offer presses, Turn over systems, film storage brushing machines, and membrane on machineseeker!
Paternoster
For the membran press membrane press
FOILS-STORAGE-PATERNOSTER
for the foil-roles stock and at the membrane press
Technical Description:
Height of the paternoster 3800mm
Max. foil width 1500mm
Max. foil diameter 500mm 12pcs bearing rods
Size of the paternoster 1000x2370x3800mm
Inclusive foil transporter (trolly)
Drive capacity 1,5 kW
Total...
Geraetenr: 72050
Unit height: 13310 mm device width: 3200 mm depth: 2060 mm shelf number: 60 shelf depth: 620 mm shelf width: 2880 mm
C3qv0swo
Load capacity per compartment: 330 kg total load: 40,000 kg control: 260 MM
Color: beige/Green
Automatic doors can be changed to 3 outlets-
KARDEX Shuttle XP500 vertical storage system:
Manufacturer: Kardex
System type: SHUTTLE-XP-500-
Year of construction: 2008
Jwgyvq
Device dimensions:
Height: 9,980mm "Can be modified"
Width: 3,170mm
Depth: 2,960mm
Number of trays: 50
Tray dimensions:
Depth: 810mm
width: 2,850mm
Load capacity per tray: 375 kg.
Total load: 65,000 kg.
condition: very good
The equipment has been disassembled by professionals and is palletized in our warehouses.
modernized machine with new control LTG-StoreControl Basic
Control extension to Extended version optionally possible
only 3 of formerly 4 identical paternosters are still available
external dimensions:
overall height 3980 mm
construction width 3500 mm
Depth 1530 mm
24 carriers with 350 kg load capacity each
in the clear useful dimensions:
H = 220 mm
W = 2850 mm
T = 490 / 530 mm
Chain jump 267 mm
Storage table in 1000 mm above OKFF with worktop in VA steel
colouring GREY / BLUE, surface cleaned, ...
Type:138/266/42Geraetenr:10488Bj.:1991Height: ca.6200 mmWidth: ca. 3350 mmDepth: ca. 1380 mm 300 mm TabletopNo. of shelves: 42Shelf width: ca. 2650 mmShelf depth: ca. 380 mm Height: ca. 230 mmShelf load: 188 kgTotal load: 7896 kgColor: beige
Bftijzwrpa
Type:138/228/50re SoGeraetenr:10490Bj.:1991Height: ca.6200 mmWidth: ca. 3350 mmDepth: ca. 1380 mm 300 mm TabletopNo. of shelves: 50Table width: ca. 2650 mmTable depth: ca. 380 mm Height: ca. 200 mmShelf load: 149 kgTotal load: 7450 kgColor: beige
Bftikmy3xc
Type: Rotomat 900
Device: 57566/1-2
Year: 1990
Obqit
Device height: ca.3440 mm
unit width: approx. 3270 mm
Device depth: approx. 1000 mm +300 mm Table top
Number of shelves: 29
Tray width: approx. 2860 mm
Tray depth: approx.330 mm
Shelf height: approx. 170 mm
shelf load: 107 kg
total load: 3103 kg
With article management
Colour: beige
This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
Photo gallery: The World's 10 biggest excavators
Photo gallery: the 10 strongest forklift trucks in the world
10 valuable tricks for buying used machines online
Sample sales contract for used machines in nine languages
Morlock Motors official partner of Machineseeker and Truckscout24
