Used thickness planer for sale (167)

Condition: new, Year of construction: 2021, New machine Year of manufacture: 2021 Equipment and Technical Data: Ncodpfx Adokwg Uns Eon Dimensions and Weights Product length approx.: 1170 mm Net weight approx.: 660 kg Product width/depth approx.: 1003 mm Connection for extraction Extraction port diameter thickness: 150 mm Installation Information Required space length: 1170 mm Machine body width/depth: 705 mm Required space width/depth: 1003 mm Working area length: 1000 mm Required space height: 1197 mm Working area width/depth: 2000 mm Note on required space: The specified dimensions consider the maximum travel paths or the usable area of the working range. Please add the stated dimensions to the required space to determine the recommended free installation area for the machine. Machine body length: 1170 mm Thickness planing Thickness table length: 520 mm Max. working height (thickness): 250 mm Thickness table width: 1000 mm Min. working length (thickness): 210 mm Min. working height (thickness): 3.5 mm Max. chip removal (thickness): 8 mm Electrical Data Main drive motor power: 7.5 kW Mains frequency: 50 Hz Connection voltage: 400 V Cutterhead type: TERSA Cutterhead speed: 4500 rpm Cutterhead diameter: 120 mm Max. planing width: 520 mm Number of planer knives: 4 pcs. Feed speed: 5/8/12/18 m/min Location: Flörsheim Availability: Short-term

Condition: excellent (used), Year of construction: 2000, Good morning, We are offering for sale a professional thicknesser of Italian manufacture, a reputable company SAC model RS63 To begin with, some useful information about the machine: * working width - 630 mm * working height - 240 mm * engine with power of 7,5 kW * 4-knife shaft for traditional knives * analogue thickness indicator * 4 feed speeds * full spiral trailing roller in front of the planer shaft. * one outfeed steel roller, smooth, behind the planer shaft. * manual up/down adjustment * top supported by 4 screws Njdpfx Aen E Tlzsd Ejcn * brake on the motor * original paint job * outlet for sawdust extraction fi 160 mm * weight about 900 kg * 2000 year of production * machine meets CE standards * overall dimensions 110 x 116 x 121 cm (length x width x height). The machine until the last days worked in the carpenter's shop, so it bears acceptable traces of use, nevertheless, it has undergone a comprehensive review with us in order to detect and eliminate any defects so you can be sure that the machine is operational, does not require any financial contribution and is immediately ready for further work in your carpenter's shop.

Condition: excellent (used), functionality: fully functional, type of input current: three-phase, number of blades: 4, overall weight: 700 kg, working width: 520 mm, number of planer blades: 4, working height: 250 mm, GRIGGIO PSA 520 thicknesser Specifications: - condition - used - manufacturer - GRIGGIO Nedpfevgm Upsx Ad Eecn - model - PSA 520 - max working width - 520 mm - max working height - 250 mm - length of worktop - 985 mm - power of main engine - 6,0 kW - total power - 6,75 kW - shaft for 4 system knives TERSA - sliding roller in the lower worktop - pulling roller - spiral - two steel rollers behind planer shaft - electrical up/down adjustment - analogue planing thickness indicator - diameter of planer shaft - 120 mm - planer shaft speed - 5000 rpm - 2 feed speeds - diameter of the exhaust stub - 150 mm - weight - approx. 700 kg - overall dimensions - 115 x 110 x 120 cm ( W x L x H )

Condition: new, Year of construction: 2023, power: 7 kW (9.52 HP), planing width: 520 mm, number of blades: 4, overall weight: 483 kg, height adjustment type: electric, planer shaft diameter: 120 mm, planing height: 240 mm, SCM MiniMax s 52es thicknesser Specifications: - condition - new - manufacturer - SCM - width of the thicknesser table - 520 mm - length of the thicknesser table - 850 mm - minimum thickness of the element - 3 mm Nsdpoqu U Dnsfx Ad Escn - maximum thickness of the element - 240 mm - maximum thickness of the thicknesser harvest - 5 mm - motor power - 7 kW - supply voltage - 400 V - shaft for 4 conventional knives - diameter of planer shaft - 120 mm - rotational speed of the planer shaft - 5000 rpm - maximum planing width - 520 mm - feed speed - 5 / 8 / 12 / 18 m/min - diameter of the exhaust stub - 120 mm - weight (net) - about 493 kg - overall dimensions - 144 x 108 x 110 cm ( W x L x H ) Additional information: - machine brand new - pictures show the actual state of the object of sale - possibility to turn on and check the machine on site. - the price given in the auction does not include VAT and transport costs - available from stock in Italy

Condition: used, Technical data: Max planing width: 500 mm Max planing height: 200 mm Cutter shaft diameter: 110 mm Number of knives: 3 1 feed roller in the table Nsdpjyctqysfx Ad Eocn 2 feed speeds Manual lifting Power supply: 400 V Motor power: 4 kW Overall dimensions: Length: 620 mm Width: 1200 mm Height: 1300 mm

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, planing width: 630 mm, number of blades: 4, total length of planing tables: 1,000 mm, chip removal: 8 mm, height adjustment type: electric, planer shaft diameter: 120 mm, planing height: 230 mm, Kölle Thickness Planer Machines DH 63 with CE Ncsdpfjxzt R Aex Ad Ejn - Year of manufacture: 1997 - 4-knife cutterhead with Centofix quick-change reversible planer knives - Motor: 7.5 kW, 10 HP - Planing width: 630 mm - Planing height: 230 mm - Electric table elevation - 3 feed speeds: 4/6/12 m/min - 1 x rubber infeed roller - 2 x rubber outfeed rollers - 1 x height-adjustable table roller - Operating manual Machine in good condition

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Thickness planer PANHANS Type 425 510mm The machine is in very good optical and technical condition. It comes from an assembly company and has only seen minimal use; everything is in original condition, with no components repainted. The machine has only been cleaned. Fully functional in all respects. - Equipped with kickback safety device - The planer knives are very easy and precise to adjust. Setting gauges, which can be mounted onto the cutterblock, are included to ensure maximum precision. - Chips are efficiently extracted thanks to the enclosed system. - Four-knife cutterblock for conventional strip planer knives. - The thickness table is mounted on two trapezoidal spindles, ensuring stability and torsion resistance - With protective hood, which can be lifted upward - Maximum planing width: 510mm; maximum planing height: 250mm - We provide personal delivery and demonstration throughout Germany for €220. This eliminates any risk at purchase. Delivery to other countries is also possible on request. - Quiet operation in compliance with DIN 45635 - Highly effective feed rollers; infeed and outfeed rollers are made of metal, with adjustable pressure on both rollers - There are two support rollers embedded in the table, which can be brought up when needed (particularly helpful when planing moist wood) - User manual included - Feed speed: 7 and 14 m/min, powered by a separate gear motor - 160mm extraction port - Thickness table elevates electrically, with fine adjustment via handwheel - Planing height is easily and precisely read from a mechanical counter - Achieves an extremely clean finish - 5.5 kW motor ensures virtually fatigue-free operation - The machine comes fitted with four sharpened knives - Extremely robust and durable design, top workmanship and highest quality - Ready for immediate use - 380V, 5.5kW Nodpfx Aexdu Tqed Escn - Speed: 5000 rpm - Year of manufacture: 1989 - Weight: approx. 800 kg - Certified GS tested version - Optimal, simple, quick, and safe operation - Heavy, solid, and durable construction—simply indestructible

Condition: new, Year of construction: 2023, machine/vehicle number: MR005067, Thicknesser with the possibility to plan up to 630mm wide and up to 300mm high. Very solid machine with simple operation. Height adjustment readable via mechanical digital hine is equipped with the following options: - Thicknessing table with 2 table top rollers - Tersa planer shaft, including 1 set of knives Technical specifications: - Maximum planing width: 630 mm Ncjdpewd Hkqefx Ad Ejn - Diameter planer shaft: 120 mm - Number of knives: 4 pieces - Type of planer shaft: Standard - Maximum chip removal: 8 mm - Maximum planing height: 300 mm - Minimum planing height: 3.5 mm - Planer height reading: Mechanical digital - Feed speed: 5-8-12-18 /min - Dimensions of thicknessing table: 640 x 1000 mm - Height adjustment of thicknessing table: Electric - Motor power: 9.5 hp - Serial number: AB00031362

Condition: new, Year of construction: 2022, planing width: 800 mm, Electric table lift, two motor speeds 1/6 mm/s Automatic table positioning to the specified position Feed table – length 1200 mm 1x grooved roller at the infeed 2x feed rollers at the outfeed Automatic star/delta motor starting Electromagnetic brake Electronically controlled, continuously variable feed belt speed 4 – 19 m/min 4-knife planer cutterhead  150 mm Segmented pressure shoes at the infeed, pressure bar at the outfeed 4-point table mounting Ncjdpfxsittnpo Ad Ejn Workpiece thickness 3 - 300 mm Extraction nozzle with outlet  180 mm Knife setting gauge Noise protection Standard PE film packaging Machine built to CE power and safety standards Additional equipment: 20 HP motor (15kW) Segmented grooved feed roller Two table relief rollers Two rubber-coated outfeed feed rollers Milling cutterhead type “Tersa” - Available from stock in Haldensleben

Condition: used, Year of construction: 1998, machine/vehicle number: 531007, functionality: fully functional, SECOND-HAND THICKNESSER PLANER CMC MOD. SP530 - CE RULES - S/N 531007 Ncedpfx Aox Rqmcjd Eon - Year 1998

Condition: excellent (used), Coater SP 400 Working width 400mm Working height 250mm Electric lifting and lowering of the worktop 4 knife shaft with traditional knives Planer shaft speed 5000r.p.m Main motor 4kw Ncedpfx Adjuqnbuj Eon Suction nozzle fi120 Dimensions of the machine 800 x 1000 x 1080mmH Weight 410kg

Condition: used, Year of construction: 1998, functionality: fully functional, SECOND-HAND THICKNESSER PLANER GRIGGIO PSA 520 - CE RULES - Year 1998 Njdpfxsx Ridmj Ad Escn

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Description: Ncodpew Tfybsfx Ad Esn Technical Specifications Working width: 630 mm Work table dimensions: 640 x 1000 mm Working height: - Maximum: 300 mm - Minimum: 3.5 mm Max. depth of cut in one pass: 8 mm Min. workpiece length: 260 mm Cutter shaft diameter: 120 mm 4 Knives: 35 x 3 x 640 mm Cutter shaft speed: 4,500 rpm Feed speed electronically adjustable: 4–20 m/min Feed motor (S6 -40%): 1.3 kW Extraction connection diameter: 150 mm Standard Equipment and Accessories - Automatic thickness table elevation with 2 speeds and micrometric adjustment - Thickness table with vertical movement via 4 steel-threaded spindles - Electronic control with 2 axes for setting: * the input value of the thickness table * the feed speed - Stepless feed speed adjustment from 4 to 20 m/min via inverter - Feed speed automatically adapts in relation to the main motor’s maximum power consumption - Upper ribbed steel roller at infeed - Two upper rubber-coated feed rollers at outfeed - Replaceable feed rollers - Independent pneumatic pressure regulation of the upper feed rollers - Motor power: 9 kW 50 Hz (11 kW 60 Hz) with automatic star-delta starting: * S1: 7.5 kW / 10 HP / 50 Hz (8.8 kW / 12 HP / 60 Hz) * S6 -40%: 9 kW / 12 HP / 50 Hz (11 kW / 15 HP / 60 Hz) Safety/Protection - Noise dampening protection at infeed and outfeed - Micro safety switch at protective cover - Emergency stop switch at front and rear of the machine - Lockable main switch - Motor protection switch - Low-voltage circuit (110 Volt) - Automatic motor brake - CE Declaration of Conformity Product code: S 7 109999 Standard safety regulations 530314 TERSA – Cutter shaft (monoblock version) with disposable double-edged knives 083201 Base frame 930731 Volt 400 EU R02017 L’invincibile S 7 CE version 931201 Frequency 50 Hz 109993 MACHINE LANGUAGE: German Availability: short-term Location: Flörsheim

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Technical data: Working width: 630 mm 4-knife cutterblock, TERSA system, d=120 mm: 4,800 rpm Max. planing depth according to CE: 8 mm Min./max. thicknessing height: 3/310 mm Min. workpiece length: 250 mm Ncsdpfew I U Hmex Ad Eon Feed speed: stepless 6 - 20 m/min Motor 380 Volt / 50 Hz: 7.5 kW Sound level according to EN 27960: 86 - 90 dB(A) Standard equipment: Thickness table adjustment via 4 trapezoidal thread spindles Electromotoric thickness table lift with electronic positioning device (planing height input via keypad with electronic display) Electrics according to CE with magnetic brake Protective switch Emergency stop switch Safety switch for cutterblock guard Thickness table extension 600 mm Extraction port d=150 mm Availability: short-term Location: Hochheim

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Features and technical data: Planing width: 630 mm Planing height: 3 - 300 mm Maximum cutting depth: 8 mm Table length: 1100 mm Cutterhead speed: 5000 rpm Feed motor power: 0.55 / 0.75 kW / 0.8 / 1.0 HP Extraction port Ø 160 mm, usable on left and right Nsdswxz U Hspfx Ad Eocn Feed speed: 7 + 14 m/min Main motor power: 7.5 kW / 10 HP Voltage: 400 V / 50 Hz Space requirement approx. 1070 x 1200 x 1060 mm Net weight approx. 1050 kg TECHNICAL DESCRIPTION Robust German engineering. For thickness planing with a planing width up to 630 mm and planing height from 3 to 300 mm, compact and ergonomic machine dimensions. PANHANS solid steel cutterhead Ø 125 mm with 4 Tersa reversible knives. Pendulum-mounted feed rollers. Segmented rubber infeed and outfeed rollers with Ø 90 mm ensure smooth and secure workpiece feed. With segmented pressure bar. Electric height adjustment of the thicknessing table, tilt-resistant on 4 trapezoidal thread spindles. With finely planed thickness table. Positioning control 4.3" touchscreen. Automatic star-delta start. Mechanical motor brake. Extraction port 160 mm, usable on left and right. Machine calibrated at the factory. CE compliant GS tested Standard equipment as follows: Solid steel cutterhead with 4 Tersa reversible knives Standard quality for 630 mm planing width Rubber infeed roller Rubber outfeed roller Thickness table without table glide rollers Positioning control 4.3" touchscreen 2 feed speeds 7 + 14 m/min Touch panel 4.3" Location: Flörsheim Availability: Immediately

Condition: excellent (used), SCM S520 Thickness Planer Working width: 520 mm Nodpfjx Hfg Njx Ad Escn Working height: 250 mm Adjustable feed speed: 4 steps Cutterhead with traditional knives 4-knife cutterhead Power: 4 kW Weight: 670 kg

Condition: used, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, planing width: 610 mm, number of blades: 4, extraction connection diameter: 150 mm, number of planer blades: 4, planing height: 190 mm, – German-made – For wet wood TECHNICAL SPECIFICATIONS: – Planing width: 610 mm – Planing height: 190 mm – Motor power: 2 x 5.5 kW – 4-knife cutterheads – Four feed speeds: 6 / 9 / 12 / 18 m/min – Two upper toothed feed rollers Nodpfxjxykn Ao Ad Escn – One upper smooth feed roller – Two support rollers in the table – Row of anti-kickback fingers – Extraction port diameter: 150 mm – Machine dimensions (L/W/H): 160 / 140 / 170 cm – Weight: 1500 kg

Condition: as good as new (ex-display), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, planing width: 630 mm, overall weight: 1,050 kg, extraction nozzle diameter: 160 mm, number of planer blades: 4, Further technical data Jointing table length: 1,050 mm Planing width: 630 mm Cutterhead: 4-knife system cutterhead Thicknessing height: 3 – 300 mm Thickness table adjustment: electric Feed gearbox: variable feed gearbox 5–20 m/min Motor power: 13 HP (10 kW) Chip removal: 10 mm Standard equipment Star-delta starter Cutterhead with 120 mm cutting circle Speed 5,000 rpm 4-knife system cutterhead (knife length 635 mm) Electric height adjustment for thicknessing table Electronic digital display Segmented pressure bar at infeed Nodpfx Adjxazp Re Escn Spring-loaded pressure bar at outfeed Infeed roller steel, spiral-toothed, Ø 85 mm Outfeed roller steel, micro-toothed, Ø 85 mm Variable feed gearbox 5–20 m/min Optional equipment 008 10 kW (13 HP) motor 010 Star-delta starter 044 Silent-POWER spiral cutterhead 060 Positioning control for thicknessing table height "Digi-Drive" 062 Segmented infeed roller, steel 063 Rubber-coated outfeed conveyor roller 065 Second rubber-coated outfeed conveyor roller 211 Infeed-side workpiece support roller 225 Scissor lift table at the thickness table outfeed Whether in carpentry, solid wood joinery, or modern furniture construction – the new Format4 thickness planer exact 63 delivers impressive results in every area.

Condition: new, Year of construction: 2026, FEATURES: a thicknessing table made of cast iron, ground, guarantees optimal sliding of the processed element a spiral shaft with replaceable carbide knife plates, significantly extends the work compared to a thicknessing machine with a knife shaft it is possible to choose one of three possible feed speeds easy knife replacement thanks to the possibility of tilting the extraction cover an efficient chain drive ensures precise feed of the processed material, guiding and removing the element the thicknessing table allows for a machining accuracy of 0.1 mm thanks to the digital indicator on the hand wheel knife adjustment screws enable quick, easy and precise setting of the knives on the head comfortable work thanks to the extraction and soundproofing cover a standard extended table with built-in rollers a polished, ground, cast iron thicknessing table allows for machining of elements up to a height of 230 mm a measured machining work thanks to the table with a central column guide and support Nsdpfx Aex Dlp Aed Eocn Technical parameters Thicknessing planing width 410 mm PLANING HEIGHT ADJUSTMENT 5-230 mm Planer shaft diameter 95 mm Number of knives 72 pcs. Planer shaft speed 4050 rpm Feed speed 6 m/min Extraction connection ø100 mm Motor power 4.2 kW Motor power S1 100% 3.0 kW Voltage 400 V Extraction port diameter 100 mm Gross weight 263 kg DIMENSIONS Width 1110 mm Depth 710 mm Height 1020 mm Table size - width 930 mm Table size - depth 410 mm

Condition: excellent (used), SICAR Forte 400 thicknesser Working width 400mm Planing height 300mm Shaft with conventional knives Shaft with 4 knives Ncjdpst Rp Hxsfx Ad Eon Shaft speed 5200r.p.m Electric lifting and lowering of the work surface Main motor 3kw 3 feed speeds CE certificate

Condition: reconditioned (used), Year of construction: 1985, functionality: fully functional, Power rating 380V Planer block motor 4kW 8.3A Feed motor 1x0.37kW 1x0.55kW 2x feed speeds 7 + 14 m/min Star-delta switch Njdpfx Asv Up R Aod Escn Planing thickness adjustable with hand crank Planing width 510 mm Leitz reversible cutter block with 2 knives 2 table rollers Extraction connection 140 mm

Condition: reconditioned (used), Connected load 380V 13A 5.5kW main drive motor + 0.7kW feed motor, planing width 630 mm, Tersa cutterblock with 4 knives, stepless feed 6-18 m/min, star-delta switch, mechanical table height adjustment via hand lever, drive via cutterblock, fine adjustment by handwheel, mechanical digital display for planing height, 1x table roller, extraction connection 160 mm, 1x steel infeed roller, 1x steel outfeed roller. Ncsdjxdl U Eepfx Ad Eon

Condition: reconditioned (used), Year of construction: 1981, machine/vehicle number: 116680, functionality: fully functional, Connected load 380V 11A planing width 630 mm planing height 250 mm feed rate 8-20 m/min suction socket 160 mm weight approx. 870 kg rubberized infeed and outfeed roller two-knife shaft with strip planing knives Central lubrication Planing height via handwheel adjustment Ncjdpfxjh U A Evo Ad Esn Star-delta switch

Condition: new, Year of construction: 2023, Weight 950 kg Power voltage 3 x 400 V Motor power (S6) 9,2 kW / 12 PS Dust extraction connection 160 mm diameter knife block 120 mm Number of knives 4 Dimensions knives 630 x 30 x 3 mm Max. Cutting depth 8 mm Width 630 mm Height capacity thickness planer 3 - 300 mm Dimensions thickness planer table 1160 x 630 mm Nedpfx Ademdr A Ej Escn Variable feed speed 5 - 22 m/min. Diameter feed rollers 70 mm incl. TERSA.cutterblock Picture contains special accessories

Condition: good (used), Year of construction: 1994, functionality: fully functional, planing width: 800 mm, overall weight: 1,600 kg, height adjustment type: electric, number of planer blades: 4, planing height: 200 mm, Equipment: motor brake, Year of manufacture: 1994 Planing width: 800 mm Maximum planing height: 200 mm Number of knives: 4 Minimum workpiece length: 500 mm Minimum planing height: 5 mm Ncsdowma N Sspfx Ad Een Speed: 4,500 rpm Table length: 1,100 mm Number of feed rollers: 1 Main motor: 11 kW Maximum feed: 32 m/min Infinitely variable feed: Yes Table rollers: Yes Digital thickness display: Yes Sectional pressure roller: Yes Electric height adjustment: Yes Cutter shaft: Centrifugal shaft Centrifugal shaft: Tersa Outfeed: Steel roller Total power: 16 kW Approx. weight: 1,600 kg Space required (length): 1.2 m Space required (width): 1.65 m Space required (height) : 1.8 m