Used thickness planer for sale (188)

Condition: good (used), Year of construction: 1989, functionality: fully functional, planing width: 2,050 mm, height adjustment type: pneumatic, planing height: 300 mm, four-side planer, width: 2200 mm, on a rotary table for curved pieces, enclosed machine Dedpow A A Ebofx Adaskg

Condition: excellent (used), Year of construction: 2012, Thickness planer, thicknesser Hofmann D632 with 4-knife Tersa cutterhead Maximum planing width: 630 mm Maximum cutting depth: 8 mm Planing height from approx. 3.5 to 305 mm, electrically adjustable, with LED display Reinforced drive motor 7.5 kW with automatic motor brake 4-knife Tersa cutterhead, knives on one side still like new 2 feed speeds: 7 and 14 m/min Rubber-coated infeed roller and two rubber-coated outfeed rollers have been renewed Planer table guided on two threaded spindles and four lateral guides Low-noise design with soundproofing hood Extraction port: 160 mm 2 x Emergency Stop Original paint, only a few areas have been touched up Dkodpfjxylk Ssx Adaog Rubber rollers replaced Feed mat replaced Drive belts replaced Operating manual CE mark Dimensions approx. 1350 x 1100 x 1180 mm (LxWxH). Weight approx. 1100 kg. The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller."

Condition: used, Year of construction: 1992, functionality: fully functional, Four-sided planer Manufacturer: SCM Model: S 50 Motor: 5.5 kW 4-knife cutterhead Feed rate: 7.5–25 m/min Dkedpox Swlnefx Adaog Planing width: 500 mm Planing height: 240 mm 2 rollers on the table

Condition: excellent (used), Year of construction: 2006, heavy duty thickness planer Panhans 436 DH 400 with large table extension Planing width: 630 mm Planing height: 250 mm Djdpsx Nrvcofx Adaskg Electric height adjustment with tenth-millimeter tip switch – digital Tersa cutterhead Table guided on four points Main motor: 7.5 kW Feed speed: 7 + 14 m/min Rubber infeed and outfeed rollers, floating Segmented pressure beam made of solid aluminium, floating Location: ex customer site - immediately available -

Condition: excellent (used), Thickness 610 mm, 4-knife cutterhead, segmented pressure bar, rollers in the thickness table Dedpfx Adexv Dl Toaokg

Condition: used, Thickness planer SAC RS/530 - used - Segmented pressure beam, electric height adjustment, Dksdpfx Adjw I T N Hsaog under-table roller, separate feed motor ----- Technical Data ----- Planing width: 530 mm, Number of knives: 4 units, Passage height: 240 mm, Feed speed: 7 / 14 m/min, Extraction port Ø: 140 mm, Motor: 4 kW, Weight: 840 kg

Condition: excellent (used), Catalogue number 7303 TECHNICAL DATA - Cutterhead width: 640 mm - Number of knives: 3 pcs - Max. thickness of workpiece: 250 mm From above: - Pawls - Toothed, feed-in roller - Hold-downs - Planing shaft - Hold-downs - Smooth, feed-out roller From below: Dkjdpfx Aex S Inmjdasg - Adjustable rollers on lower table: 2 pcs - Motor: 7.5 kW - Electric table lift - Lift motor: 0.75 kW - 4 feed speeds - Feed motor: 1.5 kW - Extraction port diameter: 140 mm - Dimensions (L/W/H): 1120x1250x1680 mm - Weight: 1033 kg – Made in Poland – Used thickness planer, very good condition Original photos Net price: 21,900 PLN Net price: 5,200 EUR (conversion rate 4.2 EUR) (Prices may change due to exchange rate fluctuations)

Condition: used, Thickness planer HDA 63 - Planing width: 630 mm - Planing height: 230 mm - Table length: 1200 mm - 5.5 kW - Weight: 100 kg - 2 feed speeds - Dial gauge for height adjustment - Digital display on the mitre stop Djdpfx Adjx Htbzsaokg - 4-knife cutterblock - Rubber outfeed roller - Steel infeed roller - Sliding carriage length: 3000 mm, width: 1100 mm The outfeed of the cutterblock (1050 x 1230 mm) can be electrically braked.

Condition: used, functionality: fully functional, planing width: 630 mm, height adjustment type: electric, planing height: 240 mm, planer shaft diameter: 125 mm, working width: 630 mm, type of input current: three-phase, – Manufactured in Poland by Jaroma – DTR technical documentation available TECHNICAL SPECIFICATIONS: – Shaft width: 630 mm Dksdpfx Adjw Ip Sqeasg – Knife shaft suitable for multiple resharpenings – Knife shaft diameter: 125 mm – Knife shaft rotation speed: 6000 rpm – Max. workpiece thickness: 240 mm – Adjustable rollers in the lower table – Motor: 5.5 kW – Electric height adjustment – Two feed speed options – Overall dimensions (L/W/H): 120 / 128 / 125 cm – Weight: 1060 kg

Condition: used, Year of construction: 2005, total width: 1,100 mm, total height: 1,120 mm, total length: 1,000 mm, - Year: 2005 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AB 173436 - Max. planing width [mm]: 500 - Max. planing height [mm]: 250 - Worktable length [mm]: 60 - Worktable width [mm]: 520 - Number of cylinders height adjustment [pcs]: 4 - Extraction nozzle diameter [mm]: 140 - Voltage [V]: 400 - Transport dimensions: 1000mm x 1100mm x 1120mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Dodpjwnhmhefx Adaskg Yorick Diebels

Condition: used, Year of construction: 1997, Planing width: 630 mm, planing height: 250 mm, Tersa cutter block Z = 4, rubber infeed and outfeed rollers, electric table adjustment with digital display, drive motor: 7.5 kW, feed speed: 7 + 14 m/min, extraction port: 160 mm, dimensions: 1070 x 1200 x 1060 mm, weight: approx. 700 kg. Storage location: Nattheim. Dksdpfx Adewmf D Ujajg

Condition: used, Thickness planer SCM S 63 - used - Segmented pressure beam, Under-table roller, Separate feed motor Dodpfx Adoxm R Uvsaskg ----- Technical specifications ----- Planing width: 630 mm, Number of knives: 4 pcs., Passage height: 235 mm, Feed speed: 6 /9/12/18 m/min., Extraction nozzle Ø: 180 mm, Weight: 1035 kg

Condition: excellent (used), TECHNICAL DATA - Shaft width: 500 mm - Number of knives: 4 pcs - Max thickness of the processed workpiece: 230 mm From above: - Pawls - Serrated, driven, sequential infeed roller - Pressure units - Planing shaft - Pressure unit - Smooth, driven outfeed roller From below: - Adjustable driving rollers in the lower table: 2 pcs - Motor: 5.5 kW Dkodpex Sx U Rsfx Adajg - Electrically operated table lift - Table lift motor: 0.37 kW - Infinitely variable feed speed regulation - Extraction nozzle diameter: 150 mm - Dimensions (LxWxH): 1000x1000x1350 mm - Weight: 690 kg ADVANTAGES – Electric table lifting – 4-knife shaft – Driving rollers in the lower table – Used thicknesser, in very good condition Net price: 16,900 PLN Net price: 4,020 EUR at a 4.2 EUR exchange rate (Prices may vary with exchange rate fluctuations)

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Planing width: 510 mm Dksdpowx Niljfx Adasg Motor power: 4.0 kW Motorized table adjustment Fine adjustment via handwheel 2 rubber feed rollers

Condition: used, Year of construction: 2005, total width: 1,250 mm, total height: 1,250 mm, total length: 1,050 mm, Weight: 820 kg - Year: 2005 - Documentation available: No - CE certificate present: No - Serial number: AF 1.04487 - Main motor power [kW]: 4.0 - Max. planing width [mm]: 520 - Planing shaft speed [rpm]: 5000 - Planer block diameter [mm]: 120 - Number of cutters [pcs.]: 2 - Transport dimensions: 1050mm x 1250mm x 1250mm (l x w x h) - Transport weight [kg]: 820kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Dkedewnhyzopfx Adasg Yorick Diebels

Condition: new, -Motorized thicknessing table lift with two speeds -Numerical display for working height -Gray cast iron thicknessing table -The thicknessing table is mounted on four large trapezoidal thread spindles for maximum stability and precision -Four feed speeds -Optional with two rollers in the thicknessing table -Standard with noise protection and chip protection curtains at the workpiece inlet and outlet -Adjustable roller contact pressure -Front feed roller with helical gearing -Rubber-coated feed roller -Powerful industrial motor Manufacturer SCM Group S.p.A. Via del Lavoro 1/3-Po box 168, 36016 Thiene-Vicenza, Italy Dimensions and weights: - Length (product) approx.: 1305 mm - Width/depth (product) approx.: 1080 mm - Weight (net) approx.: 750 kg Extraction connection: - Extraction nozzle diameter, thickness: 150 mm Dkjdsu T Hq Ejpfx Adaeg Installation information: - Space required length: 1305 mm - Space required width/depth: 1080 mm - Space required height: 1197 mm - Explanation of space requirements: The dimensions take into account the maximum travel distances or usable lengths. - Machine body length: 1305 mm - Machine body width/depth: 725 mm - Working area length: 1000 mm - Working area width/depth: 2000 mm - Explanation of the working area: Please add the specified dimensions to the space required to determine the recommended free installation area for the machine. Thickness: - Thickness table length: 630 mm - Thickness table width: 1000 mm - Minimum working height (thickness): 3.5 mm - Maximum working height (thickness): 300 mm - Minimum working length (thickness): 210 mm - Maximum chip removal (thickness): 8 mm Electrical data: - Drive motor power: 9 kW - Supply voltage: 400 V - Mains frequency: 50 Hz Planer block: - Planer block type: TERSA - Planer block diameter: 120 mm - Number of planer knives: 4 - Planer block speed: 4500 rpm - Maximum planing width: 630 mm Feed: - Feed speed: 5/8/12/18 m/min

Condition: excellent (used), CATALOG NUMBER 7186 TECHNICAL DATA - Max. planing width: 510 mm - Max. planing height, double-sided: 170 mm - Max. planing height, four-sided: 100 mm *Top section: - Infeed roller, toothed - Kickback fingers - Feed roller, toothed - Pressure bar - Planing shaft 510 mm, 4-knife (equipped with 2 knives) 4 kW - Outfeed roller, smooth *Bottom section: - Guide rail - Sliding roller – adjustable table with up/down roller - Planing shaft 510 mm, 2-knife 4 kW - 2 smooth, sliding, adjustable rollers *Rear section: - 2 side spindles + pressure unit - 1) right vertical 100 mm 2.35 kW - 2) left vertical 100 mm 2.35 kW - Spindle diameter: 35 mm - Spindles adjustable up/down, right/left - Manual thickness adjustment - 4 feed speed options - Feed motor 1.5 kW - Overall dimensions (L/W/H): 1940 x 1320 x 1140 mm - Weight: 1330 kg ADVANTAGES – Ideal for processing beams, flooring, etc. – Manufactured by the German brand KUPFERMUHLE Dodpfxex Sx S Ne Adaskg – Used planer, very good condition Net price: 32,900 PLN Net price: 7,830 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2008, Thicknesser Robland D510 Serial no. Year of construction 2008 Table dimensions 510x850mm Dkjdpfx Aewnh Tbedasg Max. working width 510mm Min-max working height 250mm Max planing depth 8mm 4 knives Tersa 4 throughput speeds 5/8/10/16 m/min Electrical high/low 380V, 5.5kW, 6000 Rpm Dimensions: 1200*880*1100mm, weight 480kg - Year: 2008 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: - Max. planing width [mm]: 530 - Max. planing height [mm]: 300 - Max. planing depth [mm]: 530 - Planing shaft speed [rpm]: 5000 - Worktable length [mm]: 880 - Planer block diameter [mm]: 110 - Cutter type: Tersa - Number of cutters [pcs.]: 4 - Extraction nozzle diameter [mm]: 150 - Max. feed speed [m/min]: 19.5 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), CATALOG NUMBER 7172 TECHNICAL DATA - planing width: 640 mm - max thickness of workpiece: 230 mm - 4-knife cutterhead Top section: - anti-kickback fingers - toothed, powered infeed roller - pressure bar - planing cutterhead - pressure bar - smooth, powered, metal outfeed roller Bottom section: 2 adjustable sliding rollers in the table - main motor: 5.5 kW - electric table lifting: approx. 0.25 kW - two feed speeds: 0.75 kW - extraction port diameter: 160 mm - dimensions (L/W/H): 1320x1270x1380 mm - weight: 903 kg ADVANTAGES – made in Germany – used thickness planer, in very good condition Dodpfxox Sxyyj Adaekg Net price: 21,900 PLN Net price: 5,200 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in the case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7134 TECHNICAL DATA - Max. planing width: 500 mm - Max. planing height: 190 mm Top section: - Anti-kickback fingers - Pulling feed roller, sequential Dkjdsx Sxw Eopfx Adaog - 2 rows of pressure rollers - Pull-in feed roller, sequential - 500 mm planing cutterhead, 4-knife, 7.5 kW motor - Pressure rollers - Smooth, pulling outfeed roller - Outfeed pressure roller Bottom section: - Adjustable infeed table + pressure roller - Smooth sliding roller - 500 mm planing cutterhead, 4-knife, 5.5 kW motor - 2 smooth sliding rollers - Side pressure roller Rear section: - Side spindles: 1) Right vertical 140 mm, 4 kW 2) Left vertical 140 mm, 4 kW - Spindle diameter: 40 mm - Spindles adjustable up/down, right/left - Stepless feed speed adjustment: 8–30 m/min - Electric table lifting - Extraction port diameters: 2x145 mm, 2x160 mm - Dimensions (L/W/H): 2050 x 1700 x 1700 mm - Weight: 2100 kg FEATURES – Ideal for flooring production – Electric table lifting – Czech manufacture – Used planer, in very good condition Net price: 37,900 PLN Net price: 9,020 EUR (based on EUR rate 4.2) (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7130 TECHNICAL DATA Dodox Sww Dopfx Adajkg - Maximum working width: 800mm - Maximum working thickness: 200mm Top section: - Pawls - Toothed feed roller - 3 rows of pressure rollers - Planing shaft 810mm, for 4 knives (2 blades fitted), approx. 7.5kW - Pressure - Smooth, metal feed roller Bottom section: - Adjustable infeed table with slip roller - Planing shaft 810mm, for 4 knives (2 blades fitted), 7.5kW - Smooth, metal slip roller - Electric table raising - Extraction nozzle diameter: 120mm - Dimensions (L/W/H): 1900x1450x1350mm - Weight approx. 2500kg – Czech manufacture – Very good condition – Used planer Net price: 33,500 PLN Net price: 7,970 EUR depending on EUR 4.2 rate (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 6935 TECHNICAL DATA - Shaft width: 630mm - Number of knives: 4 pcs - Max. thickness of workpiece: 210mm * Top section: - Anti-kickback fingers - Serrated feed roller, driven - Pressure bars - Planing shaft - Pressure bars - Smooth outfeed roller, driven * Bottom section: - Adjustable rollers on the lower table: 2 pcs - Motor: 4.4kW - 2 feed speeds Dkjdpfjx Sq H Ejx Adaog - Dimensions (L/W/H): 1220x950x1060mm - Weight: 750kg ADVANTAGES – Made in Germany – Used thickness planer, very good condition Net price: 16,900 PLN Net price: 4,020 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price may vary in case of significant currency fluctuations)

Condition: new, Catalogue number O231 - New machine, in stock - CE certificate TECHNICAL DATA - Main motor power: 5.5 kW (7.5 HP) - Feed motor power: 0.5 kW (0.75 HP) - Shaft diameter: 120 mm - Spindle speed: 5,500 rpm - Feed speed: 4 – 20 m/min - Max. working width: 630 mm - Min. working length: 280 mm - Max. working height: 300 mm - Min. thickness: 5 mm - Max. cutting depth: 8 mm - Number of knives: 4 pcs - Extraction port diameter: 160 mm Dedpfex Sq Hfsx Adaekg - Machine dimensions: 1250 x 1270 x 1180 mm - Weight: 870 kg Original photos Net price: 35,000 PLN Net price: 8,300 EUR (based on exchange rate 4.2 EUR) (Prices may vary depending on larger fluctuations)

Condition: excellent (used), Catalogue no. 6815 TECHNICAL DATA - shaft width: 640 mm - number of knives: 4 pcs - max workpiece thickness: 230 mm top side: - toothed feed shaft, driven, sequential - pressure rollers - planing shaft - pressure rollers - smooth outfeed shaft, driven bottom side: - feed roller + infeed table - adjustable roller in lower table - outfeed table + roller - main motor: 5.5 kW - stepless feed speed adjustment - feed motor: 0.5 kW - extraction port diameter: 150 mm - dimensions (LxWxH): 1630x1630x1140 mm - weight: 920 kg FEATURES - Italian-made - used thickness planer, in very good condition Net price: 17,900 PLN Net price: 4,260 EUR Dksdpfx Adox Sq Ensasg Net price calculated at 4.2 PLN/EUR (in case of significant currency fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 6647 TECHNICAL DATA - shaft width: 350 mm - max. workpiece thickness: 230 mm - planing shaft: 3-knife * from above: - anti-kickback fingers - toothed, powered, swiveling infeed shaft - pressure bar - planing shaft - smooth, powered outfeed shaft * from below: Djdpfx Aox Sq Ddjdaokg - adjustable roller on bottom table - motor: 2.2 kW - 2 feed speeds - dimensions (L/W/H): 720x810x1000 mm - weight: 352 kg Net price: 9900 PLN Net price: 2360 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)