Used Wide Planer for sale (6,919)

Condition: as good as new (ex-display), Year of construction: 2025, Double side planer (Double Surface Planer ) extra wide 400 mm Maximum working width 400 mm Maximum working height 200 mm Heavy cardan feed system Special spike feedsystem Unlike the conventional chain drive systems, this machine employs a patented synchronized transmission system along the four fitting columns. Electronic height adjustment Spiral cutterheads top and bottom Nedpsy Dpmusfx Aaajwf Latest generation IE-3 motors Spindle and feed brakes CE

Condition: excellent (used), Catalogue number: 7275 TECHNICAL DATA - Max. planing width: 610 mm - Max. planing height: 200 mm From above: - Toothed feed roller - Kickback pawls - 2 pressure rollers - Toothed feed roller - Pressure roller Nwsdpfx Aasytdkxoaof - 610 mm planing shaft, 4-knife, 7.5 kW - Pressure rollers - Smooth feed roller From below: - Guide bar - Adjustable infeed table with split, smooth sliding shaft - 610 mm planing shaft, 4-knife, 5.5 kW - 2 smooth, powered feed rollers - Side pressure roller At the rear: - Side spindles + 2 pressure rollers: 1) Right vertical spindle, 5.5 kW 2) Left vertical spindle, 5 kW - Max. planing height on side spindles: 200 mm - Spindle diameter: 35 mm - Spindles adjustable up/down, left/right 3) Additional horizontal spindle, 160 mm, adjustable up/down and left/right + tilting, approx. 4 kW - Planing possible with the additional spindle from above/below/side - Spindle diameter: 35 mm - Adjustable rollers on lower table - 2 feed speeds - Feed motor: 2.2 kW - Extraction port diameters: 120 mm - Dimensions (LxWxH): 2550 x 1700 x 1350 mm - Approx. weight: 3,000 kg ADVANTAGES - Wide planer for wet and dry timber - Ideal for processing beams, floorboards, etc. - 2 horizontal planing shafts + 2 vertical spindles + 1 horizontal spindle - Complete with cutterheads - Manufactured by German brand KUPFERMUHLE - Used planer in very good condition - Original photos Net price: 58,900 PLN Net price: 14,020 EUR (based on exchange rate €1 = 4.2 PLN) (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number 7641 TECHNICAL DATA - Max. planing width: 800 mm - Max. planing height: 200 mm - Upper section: - Pull-in feed roller, toothed - Pawls - Pressure unit - 2 feed rollers, toothed - Pressure unit - Planing shaft 800 mm, 4-knife, 7.5 kW - Pressure units - Profiling shaft 800 mm, 4-knife (fitted with 3 straight knives, 1 profiling knife) - Pressure unit - Outfeed roller, smooth - Lower section: - Guide rail - Infeed table - Feed roller, smooth - Planing shaft 800 mm, 4-knife, 7.5 kW Nwjdpfsyqt Iuex Aaajf - 2 feed rollers, smooth - Smooth, split running roller - Side pressure at outfeed - Rear section: - 2 side spindles + pressure units: 1) Right vertical 90 mm, 4 kW 2) Left vertical 90 mm, 4 kW - Spindle diameter: 35 mm - Spindles arranged alternately - Spindles adjustable up/down, right/left 3) Additional lower horizontal spindle, 350 mm, adjustable up/down + right/left, 5.5 kW - Spindle diameter: 40 mm - Outfeed: 4 upper metal sliding rollers, 2 lower feed rollers, rubber-coated - Adjustable rollers in the lower table - Electric height adjustment for planing - 6 feed speeds: 7/14/9/18/11.5/23 m/min - Feed motor: 2.2 kW - Extraction outlet diameters: 3×180, 130 mm - Dimensions (L×W×H): 3100×2000×1900 mm - Weight: approx. 3,500 kg ADVANTAGES – The best wide planing machine for wet and dry timber – Ideal for processing beams, flooring, etc. – 3 planing shafts + 3 spindles – Manufactured by the German brand KUPFERMUHLE – Used planer in very good condition Net price: 64,900 PLN Net price: 15,450 EUR (based on an exchange rate of 4.2 EUR) (Prices may change with significant currency fluctuations)

Condition: excellent (used), CATALOG NUMBER 7503 TECHNICAL DATA: - Max. planing width: 610 mm Nwsdjyz Sfbspfx Aaajf - Max. two-sided planing height: 200 mm - Max. four-sided planing height: 100 mm Top section: - 2 rubber feed rollers - 2 toothed feed rollers - Metal feed roller - Toothed infeed roller - Pawls - Pressure beam - 2 toothed feed rollers - Pressure beam - 610 mm, 4-knife planing shaft, 7.5 kW - Pressure beam - Smooth metal feed roller - Pressure beam - Profiling shaft, 7.5 kW - Pressure beam - Rubber feed roller Bottom section: - Planing shaft, 35 mm diameter, 130 mm shaft length, 2.2 kW - 2 guide rails - Infeed table - Smooth feed roller - 610 mm, 4-knife planing shaft (equipped with 2 knives), 7.5 kW - 2 smooth feed rollers - Divided metal slip roller - Side pressure roller Rear section: - Side spindles + 2 pressure units - 1) Right vertical 95 mm, 4 kW - 2) Left vertical 95 mm, 4 kW - Spindle diameter: 35 mm - Spindles adjustable up/down, right/left - Adjustable rollers in the lower table - Electric thickness adjustment - 6 feed speeds: 7 / 9 / 11.5 / 14 / 18 / 23 m/min - Feed motor: 3.1 kW - Extraction connector diameters: 3×120 mm, 3x160 mm - Dimensions (L x W x H): 3150 x 1900 x 1600 mm - Weight: approx. 3,500 kg ADVANTAGES: – The best wide planer for wet and dry wood – Perfect for processing beams, flooring, etc. – Additional profiling shaft and planer shaft (scorer) – 4 horizontal planing shafts + 2 vertical spindles – Manufactured by German brand KUPFERMUHLE – Used planer, very good condition Net price: 66,900 PLN Net price: 15,930 EUR (exchange rate: 4.2 EUR) (Prices may change with exchange rate fluctuations)

Condition: as good as new (ex-display), Year of construction: 2025, Double side planer (Double Surface Planer ) extra wide 610 mm Maximum working width 610 mm Maximum working height 200 mm Heavy cardan feed system Special spike feedsystem Njdpfxox Upt Ao Aaaewf Unlike the conventional chain drive systems, this machine employs a patented synchronized transmission system along the four fitting columns. Electronic height adjustment Spiral cutterheads top and bottom Latest generation IE-3 motors Spindle and feed brakes CE

Condition: ready for operation (used), functionality: fully functional, Kupfermühle KH 30 4-Sided Planer with additional unit: horizontal working spindle with outfeed unit 4-Sided Universal Planing Machine KUPFERMÜHLE Electrical system: 400 Volt / 50 Hz ...../58.5 kW Original paint in reseda green RAL 6011 Motor power and configuration (kW): bottom 7.5 / top 11.0 / vertical right 7.5 / vertical left 11.0 5th spindle (bottom): 11.0 / feed 7.5 / thicknesser 3.0 Feed speed min/max: 5 – 30 m/min Working spindles: 5 units Extraction/Chip collection connectors: bottom 200 / top 200 / right 160 / left 160 mm / bottom 140 mm Nwsdpfxsx Ehfco Aaasf Working width min/max: 30 mm / 310 mm Working height min/max (2-sided): 15 mm / 300 mm Working height min/max (4-sided): 15 mm / 180 mm (OPTION: 250 or 300 mm) Key features: – Constant table height – Right-side guide fence – Interchangeable planer heads – Jointing device below and above – Slotted, replaceable tables for noise reduction – Outfeed unit with 2 driven rollers on top and double-guided upper section – Height adjustment synchronized with base machine Machine delivered in refurbished and tested condition, with functional warranty Further options: – New paintwork – Repainting – General overhaul etc. etc.

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with XPLANE cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm Nedsqlck Nspfx Aaaswf - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: Xplane solid steel cutterblock Cutterblock with 3 spiral rows of knives (33 cambered hard metal knives per row), delivery includes full set of knives and a Torx T20 T-wrench; shaft speed 6,000 rpm included; The emission sound pressure level LpA during processing is reduced by 10 dB(A) - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, table surface precision-planed - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at the infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with Tersa cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Nwedpfx Aoqlckpoaaof Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1998, functionality: fully functional, planing height: 250 mm, working width: 410 mm, overall weight: 5,500 kg, Planer REX TIMBERWORK 410x250 mm + 4x chamfers + saw spindle Year of manufacture: 1998 Location: France, Savoie Nsdswmm Alepfx Aaaewf

Condition: used, Year of construction: 2010, functionality: fully functional, overall weight: 10,000 kg, input voltage: 380 V, Equipment: cabin, Lamellar planing machine 310 x 200 mm + saw spindle Nodpex Exbdjfx Aaajwf

Condition: good (used), Year of construction: 1975, functionality: fully functional, planing width: 860 mm, planing height: 310 mm, working width: 860 mm, working height: 750 mm, chip removal: 20 mm, rotational speed (max.): 4,200 rpm, number of planer blades: 4, heavy-duty thickness planer, very well suited for construction timber, etc., constant table height, sturdy roller conveyor with drive in the infeed area, sturdy roller conveyor without drive in the outfeed area Nsdpfx Asxfl A Sjaaswf

Condition: good (used), Year of construction: 2018, Wide Range DWR Round labelling machine 2018, semi auto labelling machine for cylindrical products, max label width 200mm, up to 40 different software programmes, up to 1200 units per hour capacity, Nwedoyti I Nspfx Aaaof

Condition: excellent (used), Year of construction: 1994, 4 side planer 8 8 HARBS heads long table going 3 meters. Machine weight 5500 kg Nwodpfx Aaol Dw Nxeaof cardan drive. Head arrangement, bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal. Upper horizontal. 5.5 kW and 7.5 kW motors. Planing width 230 mm. Planing height 160 mm.

Condition: new, Year of construction: 2023, functionality: fully functional, CHILLER UNIT 290 kW – 2 separate refrigeration circuits, shell-and-tube heat exchanger, R32 Cooling capacity: 290 kW at 7/12°C and 35°C ambient temperature Shell-and-tube evaporator for efficient heat transfer and compact design Low-GWP refrigerant R32 Four compressors in two separate refrigeration circuits for high operational reliability and flexible load distribution Low-noise design thanks to optimized sound insulation Completely framed compressor enclosure for efficient protection, easy maintenance, and reduced noise emission Winter package allowing operation at ambient temperatures down to -20°C Nwodpfx Aasu Au I Tjaef Ideally suited for industrial processes.

Condition: excellent (used), Year of construction: 2016, Steton 5-head four-sided planer. Steton 5-head four-sided planer. The machine after the review does not require a financial contribution. Technical data: - max width of the workpiece 23 cm - max height 13 cm spindle diameter 40mm - 1 - Horizontal bottom 23 cm - 2 - vertical right 13 cm - 3 - vertical left 13 cm - 4 - horizontal upper 23 cm - 5 - universal 360 degree soundproofing cabin Njdpfx Aaji Apuheaswf - electric setting of planing thickness - two types of feed speed

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 5211291, feed rate X-axis: 16 m/min, grinding width: 1,350 mm, power: 15 kW (20.39 HP), grinding belt length: 2,620 mm, workpiece height (max.): 160 mm, TECHNICAL DETAILS Sanding width: 1,350 mm Abrasive belt length: 2,620 mm Workpiece thickness: 3 to 160 mm Feed speed range: 3 – 16 m/min (infinitely variable) MACHINE DETAILS Motor power: approx. 15 kW Dimensions & Weight Nwsdpoyx Et Tsfx Aaaof Dimensions (L x W x H): 3,000 x 3,500 x 2,500 mm Machine weight: approx. 4,300 kg EQUIPMENT Cross unit for intermediate lacquer sanding Combination unit (roller + sanding pad) Electronic segmented sanding pad for precise surface finishing Finishing brush for perfect end results Ionization device for dust neutralization Dust extraction with propeller fan for a clean working environment Touchscreen control for user-friendly operation Calibrating and fine sanding in a single pass High flexibility due to multiple units Robust construction for industrial use Ideal for processing lacquered, veneered, and solid wood panels Note: The above data is taken from the manufacturer’s brochure or documentation and may differ from actual values.

Condition: excellent (used), Year of construction: 1982, Used Noble & Lund Double Column Plano Milling machine model P/RLMA with vertical milling head and planing head. Serial #6344P Year of manufacture: October 1982. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION TABLE WORKING AREA 5’-0 x 16’ 0”( 1524mm x 4876mm) MAX COMPONENT HEIGHT 5’0 (1524 mm) DISTANCE BETWEEN COLUMNS 6’1” (1866mm) MAX. WEIGHT OF WORKPIECE 15000kgs RAM TRAVEL 4’0”(914mm) RAM SECTION 14” x 14”(355 x 355 mm) SPINDLE TAPER ISO 50 MILLING SPINDLE MOTOR 40HP (30Kw) MILLING FEED RATES / MIN 1”-48”/MIN( 25-1200MM/MIN) PLANING MOTOR 40HP(30 Kw) MILLING SPINDLE SPEEDS 7-835 RPM ELECTRICAL SUPPLY 415V 3Ph 50Hz LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM Nwedpjh U Nvkefx Aaasf WEIGHT 42000 KGS NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: excellent (used), Year of construction: 2013, operating hours: 1,395 h, Calibration and Fine Sanding Automatic, Kundig Brilliant Wide Belt Sander with electronic segmented sanding pad, tiltable sanding unit, and lacquer sanding capability. A video of the machine in operation can be provided on request. Nwedpfoyxg N Nox Aaaof Ideal sanding machine for interior finishing companies, also suitable for intermediate lacquer sanding. Single-belt machine with combination unit and electronic sectional pressure bar Edge segments can be individually activated/deactivated Segment width of the pressure bar: 22mm (ideal for lacquer intermediate sanding) Pneumatically adjustable calibration roller, grooved rubber-coated roller with grain compensation Drive motor: 11kW Infinitely variable belt speed: 3 - 15 m/s via frequency converter Feed belt infinitely adjustable from approx. 3 to 15 m/min Workpiece-controlled belt blow-off device Constant table height approx. 950mm by adjusting the upper part of the machine, thus integrable into sanding lines Feed belt remains very grippy and is in excellent condition Carpet with adjustable vacuum fan allows safe holding of small workpieces Maximum sanding width approx. 1100mm Workpiece height approx. 3.5 to 200mm Abrasive belt dimensions: 1120 x 2000mm Infeed and outfeed roller tables Hood lock Extraction connections: 1 x 180mm, 1 x 125mm Terminal control with 45 programmable sanding programs for automatic machine operation. Parameters: belt speed, feed speed, workpiece height, belt blow-off nozzle, vacuum fan, calibration roller adjustment, and parameters of the segmented sanding pad. Thickness measurement system with adjustable material removal and Enormatic automatic thickness setting with feed release, making constant caliper measurement unnecessary. Programs for different sanding tasks are storable and selectable via smartselect. CE mark Operating manual 2 sanding inserts available The four bellows have been replaced Supplied without the mains connection cable shown Original paintwork, only minor touch-ups Very good condition from a small workshop Machine has approx. 1,395 operating hours, or about 2 hours per week Dimensions approx. 1900 x 1650 x 2150mm (LxWxH) Weight approx. 2,300kg With large mobile storage table at belt height for storing sanding belts Table size approx. 1520 x 1360 x 950mm Includes various sanding belts from K80 to K400 The machine can be demonstrated on site by appointment. We only offer machines that are immediately operational and ready for demonstration at our warehouse. See 'Other Offers from this Supplier.'

Condition: used, Year of construction: 1998, x-travel 9000 mm y-travel 4350 mm z-travel 1250 mm Control Siemens 840D table-size 3500x2000 mm Nwedpfx Aaoy E Tvpsaof workpiece weight - double table 40 to workpiece weight - single table 20 to feeds x-axis 1-10000 mm/min rapid motion - x-axis 30000 mm/min feeds y-axis 1-10000 mm/min rapid traverse y-axis 30000 mm/min feeds z-axis 1-10000 mm/min rapid travel z-direction 20000 mm/min milling and drilling device M3-63KW / FW1250 max. torque on the milling spindle 3300 Nm power capacity - milling spindle 63 kW turning speed - milling spindle 5000 U/min c-axis 360 Grad positive location each C-Achse 0,001 von 0-360 G Grad tool taper Iso 50 numbers of tools in magazin 60 weight of tools max. 50 kg diameter of tools max. 360 mm tool length - max. 600 mm angular milling head HSD 70 C 650 M3 angular milling head - universal GSC 120 C 450 M3 vertical spindle unit VS 36 C 650 M3 vertical spindle unit VS 330 C distance between columns 2500 mm weight of the machine ca. 140 t dimensions of the machine ca. 22x11x6 m

Condition: good (used), mileage: 418,900 km, power: 210 kW (285.52 HP), first registration: 02/2019, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,500 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 8, emission class: euro6, number of seats: 2, total length: 9,400 mm, total width: 2,540 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, loading space length: 71,000 mm, loading space width: 25,000 mm, loading space height: 24,000 mm, Year of construction: 2019, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, fog lights, power mirror, spoiler, tail-lift, = Additional Options and Accessories = - Roof spoiler - Euro 6 - Driver airbag - Wooden loading platform - Height-adjustable steering wheel Nwjdpfxjyupl Rj Aaajf - Air suspension - Front center armrest - Sun visor flap - Partition wall = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 7,698 cc Maximum front axle load: 8,000 kg Maximum rear axle load: 11,500 kg Weights Unladen weight: 8,785 kg Payload: 11,715 kg Gross vehicle weight: 20,500 kg Functional Tail lift: D'HOLLANDIA, rear tailgate, 1,500 kg Maintenance, History and Condition APK (Technical Inspection): valid until 03/2027 Technical condition: good Optical condition: good Identification Registration number: 58-BLX-3

Condition: as good as new (ex-display), Year of construction: 2026, 5222454 LIBRA 45/2 RTC 135 Wide Belt Sander 5257433 "Z" Designation for RTC 135 5257452 Vacuum table with electric fan 3 kW 5257453 Oscillating belt air-blast device for 5257454 Oscillating belt air-blast device for 5257462 Reinforced motor 15 kW (20 HP) 5257485 Roller table at infeed and outfeed for 5257499 Grooved rubber pressure roller, 2nd position 5257500 Grooved rubber pressure roller, 3rd position 5257504 Infinitely variable conveyor feed with inverter 5257605 Door with inspection window 5257606 LED lamp for internal illumination TECHNICAL DATA Dimensions and Weights Length (product) approx. 1800 mm Width/depth (product) approx. 2000 mm Height (product) approx. 2070 mm Extraction Connection Number of extraction ports: 2 Extraction port diameter: 200 mm Electrical Data Feed motor power: 0.8 kW Connection voltage: 400 V Mains frequency: 50 Hz Height adjustment motor power: 0.25 kW Output power (motor power): 11 kW Sanding Unit Nwsdoy Ehiwjpfx Aaaof Sanding belt length: 2150 mm Sanding belt width: 1370 mm Max. sanding width: 1350 mm Feed Unit Feed speed: 4.5 / 9 m/min Workpiece Min. workpiece height: 4 mm Max. workpiece height: 170 mm Product Information EU 2023/2854 Type of generated data: usage data Format of generated data: common, machine-readable formats, e.g., JSON Data volume: up to 5 MB Continuous real-time data generation: yes Data storage location: on the device and a remote server Data access: on the device and via physical and wireless interfaces Location: ex stock 54634 Bitburg - immediately available -

Condition: used, total width: 700 mm, total height: 1,400 mm, Weight: 250 kg Dimensions (LxBxH): 125 x 70 x 140 cm - Documentation available: No - CE certificate present: No - Max. planing width [mm]: 260 - Max. planing height [mm]: 185 - Total table length [mm]: 1210 - Number of knives [pcs]: 3 - Diameter extraction nozzle [mm]: 100 - Height adjustment: Manual - Voltage [V]: 220 - Transport dimensions: 1250mm x 700mm x 1400mm (l x w x h) - Transport weight [kg]: 250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Nodpfx Aasy Ax H Isajwf Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total width: 700 mm, total height: 1,300 mm, Weight: 150 kg Dimensions (LxBxH): 125 x 70 x 130 cm - Documentation available: No - CE certificate present: No - Max. planing width [mm]: 310 - Infeed table length [mm]: 510 - Outfeed table length [mm]: 520 - Total table length [mm]: 1090 - Work table width [mm]: 310 - Cutterhead diameter [mm]: 100 - Type of knives: Standard - Number of knives [pcs]: 3 - Number of height adjustment cylinders [pcs]: 1 - Diameter extraction nozzle [mm]: 125 - Height adjustment: Manual - Options: Braked motor - Voltage [V]: 400 - Fuse [A]: 16 - Transport dimensions: 1250mm x 700mm x 1300mm (l x w x h) - Transport weight [kg]: 150kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels Njdpfx Aoy Awa Toaaowf

Condition: used, Year of construction: 1962, Used machine Year of manufacture: 1962 Equipment and technical data: Planing width: 630 mm Working height: 250 mm Table length: 1100 mm Extraction nozzle: 160 mm Knives: 4 strip planing knives The machine does not have a motor brake! Nwedpow Sbbrofx Aaasf Location: Flörsheim Availability: short notice

Condition: new, Year of construction: 2022, 28.55 rm. Wide span shelving 80 cm deep , Workshop shelving , Storage shelving , Large shelving , Manual storage , Shelving , Small parts storage Data : - Height : approx. 200 cm - Depth : approx. 80 cm - Length : approx. 28.55 running meters Shelf offer consisting of: - 16 x frame approx. 200 x 80 cm, disassembled. - 90 x crossbar approx. 185 cm. - 45 x support shelf approx. 184.5 x 79.5 cm. - 90 x beam / load distributor. - Incl. safety pins - Model : BLT , Type WR20/80 - Load: 400 kg shelf load, with evenly distributed load. - Levels: 3 x storage levels. - Chipboard, natural. - Uprights blue. - Galvanized beam Nwodoy Hibwepfx Aaasf - New from stock. - other quantities available! We can pre-assemble the frames for a small surcharge of 6€/net per piece. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 2887,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.