Dickte SAC RS/530 - used -

SAC RS/530

Condition: ready for operation (used), functionality: fully functional, Thickness planer SAC RS53, 4 knives Specification: • Condition – used, after inspection • Working width – 530 mm • Working height – 240 mm • Motor power – 4.0 kW • 4-knife cutterhead for traditional knives • Analog thickness indicator • 2 feed speeds • Full, straight infeed roller before the cutterhead • Two steel outfeed rollers after the cutterhead • Slip roller in the lower table • Manual height adjustment (up/down) • Table supported by a single solid piston • Original paintwork • Outlet for chip extraction, diameter 145 mm • Weight approx. 800 kg Hjdsxdxk Tspfx Acvok • Overall dimensions: 95 x 100 x 105 cm (L x W x H) Additional information: • The photos shown reflect the actual condition of the item for sale • Possible to power on and test the machine on site.

Condition: ready for operation (used), Year of construction: 1984, Press force: 3600kN, press force stroke: 1.7mm, press work capacity: 6120J. Stroke: 60mm, installation height: 340mm. Table clamping width/depth: 440mm/525mm, tool holder width/depth: 440mm/320mm. Dimensions X/Y/Z: 1300mm/2000mm/2230mm, weight: approx. 6300kg. Hjdpsr A Eifsfx Acvek

Condition: good (used), Year of construction: 1990, power: 5.5 kW (7.48 HP), cutting height (max.): 140 mm, cutting width (max.): 1,000 mm, table length: 1,400 mm, Types:F 45 ,Machine nr:90-8-86 Hjdpfxstxh Nis Acvek

Condition: new, Year of construction: 2026, Engine power 5HP Blade diameter 250mm Blade revolutions per (min) 5300 Automatic pneumatic movable table Galvanized iron and polyzene supports √ Hjdpfx Asu Rqq Hecvok Maximum horizontal cutting length 4200mm Maximum vertical cutting height 2200mm Maximum horizontal cutting height 2080mm Maximum cutting depth 60mm

Condition: good (used), Swivel Spindle Milling Machine, Table Milling Machine, Bench Milling Machine -Spindle adjustment: height and angle -Swivel: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed apparatus Holz-Her 3 rolls -Useful shaft length: 100 mm Hsdpfxjh Nvyzs Acvok -Spindle: Ø 30 mm -Max. Milling cutter: Ø 220 mm -Dimensions: 1540/1100/H1520 mm -Weight: 962 kg

Condition: used, functionality: fully functional, Various electric motors in stock Different renowned German manufacturers From 1 to 160 kW Hedpfex Nh S Tsx Acvek All electric motors function tested

Condition: used, Technical details: Hedova Evfspfx Acvok x-travel: 762 mm y-travel: 382 mm z-travel: 419 mm tool taper: Sk 40 table surface area: 1070 x 230 mm range of revolution per miute: 60 - 4.200 U/min feed continuous: 0,038/0,073/0,120 in 3 steps mm/min spindle stroke: 120 mm spindle taper: Iso 40 spindle head swivable left - right: 90 ° weight of the machine ca.: 1600 kg machine dimensions LxWxH: 1,8 x 1,5 x 2,15 m This machine is currently in the technical department. *

Condition: new, Year of construction: 2026, Drum chipper series ATH S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation ATH 220 series - Feed height: 200 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 4 pieces - Number of counter knives: 2 pieces - Rotor diameter:520 mm - Number of feed rollers: 3 pieces - Throughput: up to approx. 40 rm/h * - Chipping length: 5 - 50 mm - Chipper drive power: 22 - 110 kW - Drive power feed rollers: 2 x 2.2 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 2,800 - 4,000 kg Hjdeuz Hmxepfx Acvok ATH 330 series - Feed height: 300 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 6 pieces - Number of counter knives: 2 pieces - Rotor diameter: 700 mm - Number of feed rollers: 3 pieces - Throughput capacity: up to approx. 70 rm/h * - Chipping length: 5 - 80 mm - Chipper drive power: 37 - 250 kW - Drive power feed rollers: 2 x 3.0 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 3,500 - 5,000 kg *depending on chipper length, kW main motor, number of knives, feed Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: used, Year of construction: 1977, roll diameter 320 mm throat 310 mm workpiece height 230 mm table-size 505 x 505 mm cutting speed 12 - 375 m/min turning speeds U/min saw band length 2 mm voltage 400 V total power requirement 1,3 kW weight of the machine ca. 420 kg Hsdpfx Asvnv S Tscvek dimensions of the machine ca. 0,80 x 0,80 x 1,65 m - serial-no.: 22600-77/14 - with stepless feed - welding equipment IDEAL - grinding wheel - machine lamp

Condition: good (used), Year of construction: 1981, spindle moulder, spindle moulder, wood milling machine -Manufacturer: Martin, table milling machine type T 21 with table extension -Milling spindle: Ø 30 mm -Speeds: 3,000/4,500/6,000/9,000 rpm Hsdpswnbfkofx Acvek -Dimensions total: 1620/1060/H1120 mm -Total weight: 698 kg