Used Gear Planer for sale (9,155)

Condition: excellent (used), The HURTH MODUL ZSTK 251 bevel gear planing machine was designed as a special machine and is used by manufacturers of drive systems in the drive technology, automotive, agricultural machinery, machine tools, mining technology, aviation and textile machinery sectors for the gear shaping of straight-toothed bevel gears with a short run-out. Csdoup T Rlspfx Aqveri We still have 1 of these machines in stock, which, in conjunction with the Klingelnberg BF 203 bevel gear milling machine, can also produce crowned bevel gear sets in high quality. Technical data Workpiece diameter: 315 mm Module max.: 10 mm Tooth width: 45 mm Dimensions: 2.7 x 2.3 x 2.1 m Weight: 7,000 kg *Information and data are non-binding and subject to prior sale Viewing under operating conditions possible after consultation.

Condition: excellent (used), CATALOGUE NUMBER 8035 TECHNICAL DATA - shaft width 640mm - 4-knife shaft - max. thickness of workpiece on thicknesser 250mm - max. thickness of workpiece on side heads (3-sided) 110mm – from above: - ejectors - geared infeed shaft - pressure roller - planing shaft - pressure roller Csdpfxezu Sgpe Aqvjri - smooth outfeed shaft - pressure roller at the outlet – from below: - guide strip - adjustable rollers in the lower bed 2 pcs – from the rear: - side spindles + pressure roller 2 pcs - spindle height 110mm - spindle diameter 30mm - spindles adjustable left/right, up/down - motors for side spindles 2x4kW - main motor 7.5kW - 3 feed speed types - electric table lifting - dust extraction nozzle 2x110mm - overall dimensions L/W/H 1650x1500x1210mm - weight 1370kg ADVANTAGES - Made in Poland - Shaft with 4 knives - Used planer, very good condition Net price: 23900 PLN Net price: 5558 EUR depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations)

Condition: ready for operation (used), Year of construction: 2000, machine/vehicle number: 88.961, functionality: fully functional, planing width: 230 mm, spindle diameter: 40 mm, number of spindles: 10, planing height: 120 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of spindles: 10 1st planing axis: 260 mm Spindle 1 Position: Bottom Spindle diameter: 40 mm Planing shaft speed: 8,000 rpm Spindle 2 Position: Right Spindle diameter: 40 mm Planing shaft speed: 8,000 rpm Spindle 3 Position: Left Spindle diameter: 40 mm Planing shaft speed: 8,000 rpm Spindle 4 Position: Right Spindle diameter: 40 mm Planing shaft speed: 8,000 rpm Cjdpe Af Hgvofx Aqveri Spindle 5 Position: Top Spindle diameter: 40 mm Planing shaft speed: 8,000 rpm Spindle 6 Position: Bottom Spindle diameter: 40 mm Planing shaft speed: 8,000 rpm Spindle 7 Position: Top Spindle diameter: 40 mm Planing shaft speed: 8,000 rpm Spindle 8 Position: Bottom Spindle diameter: 40 mm Planing shaft speed: 8,000 rpm Spindle 9 Position: Top Spindle diameter: 40 mm Planing shaft speed: 8,000 rpm Spindle 10 Position: Top Spindle diameter: 40 mm Planing shaft speed: 8,000 rpm Planing width: min. 10 mm Planing width: max. 230 mm Planing height: max. 120 mm Infeed table length: 1,975 mm Diameter of feed rollers: 140 mm Conveyor motor power: 5.5 kW Conveyor drive: Cardan drive Feed speed: min. 4 m/min Feed speed: max. 24 m/min Feed speed control: Stepless MACHINE DETAILS Diameter of extraction nozzle: 140 mm Lubrication system: Manual Voltage: 380 V Current consumption: 189 A Fuse rating: 200 A Power: 80 kW Dimensions & Weight Dimensions (L x W x H): 7,100 x 2,100 x 2,200 mm Weight: 6,000 kg Number of transport packages: 1 EQUIPMENT Documentation CE marking

Condition: excellent (used), Catalog number: 8061 TECHNICAL DATA - max. width of workpiece: 230mm - max. height of workpiece: 130mm - 5 spindles 1) horizontal, lower: 230mm, 4kW 2) vertical, right: 130mm 3) vertical, left: 130mm (spindles 2 and 3), 11kW 4) horizontal, upper: 230mm, 5.5kW 5) horizontal, lower: 230mm, 7.5kW - all spindles adjustable up/down, left/right - spindle diameter: 40mm - 4 infeed rollers (top), geared - 1 outfeed roller (top), rubber, smooth - feed on Cardan shafts - rollers with pneumatic pressure - stepless feed speed adjustment via frequency inverter - feed motor: 4kW - operating pressure: 6-10 bar - electrical adjustment of planing thickness Credpfjzrgarjx Aqvsi - central lubrication of the table - length of infeed table: 1970mm - diameter of dust extraction nozzles: 5x140mm - dimensions (L/W/H): 3400x1660x1600mm - weight: approximately 2500kg ADVANTAGES – German production, WEINIG brand – with 5 heads – DTR documentation (Technical Data Sheet) – used planer, very good condition Net price: 45900 PLN Net price: 10675 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant exchange rate fluctuations)

Condition: new, Year of construction: 2025, 4-knife cutterhead for optimal planing results Smooth operation thanks to the precision unit and the heavy cast-iron construction Front steel infeed roller with helical gearing for optimal feed rate Satin-finished steel outfeed roller, optionally with a rubber roller in the outfeed The work table is mounted on four large columns, ensuring maximum stability under all working conditions. The thickness table adjustment is done via a handwheel with a numerical display for the set planing height (accurate to 1/10 mm) Standard with two feed speeds, comfortably selectable from the operator's side Powerful industrial motor Stable steel and cast iron construction Equipment details: Work table Mounted on four large spindles, which ensure maximum stability under all working conditions A special lifting device ensures that the table position is maintained perfectly, even without locking TERSA planing cutterhead No more adjustment and screwing Planer knife change in seconds Self-locking Particularly quiet Thickness table adjustment on S 41 elite s via a handwheel with a numerical display for the set planing height (accurate to 1/10 mm) Dimensions and weights Length approx. 900 mm Width/Depth approx. 1070 mm Weight approx. 361 kg Dust extraction connection Dust extraction nozzle diameter for thicknessing 120 mm Drive power Main motor 5 kW Installation information Space requirement Length 1070 mm Space requirement Width/Depth 900 mm Space requirement Height 1100 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Machine body Length 1040 mm Machine body Width/Depth 900 mm Length 3000 mm Width 1600 mm Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Thicknessing Thickness table Length 423 mm Thickness table Width 775 mm Working height min. 3 mm Working height max. 240 mm Working length min. 180 mm Maximum chip removal 5 mm Electrical data Connection voltage 400 V Planer cutterhead Type TERSA Diameter 95 mm Number of planer knives 4 pcs Speed 5000 min¯¹ Planer width max. 410 mm Feed Speed 6/12 m/min Crodpfx Aod Hx Hnoqvoi

Condition: new, Year of construction: 2025, Motorized planer table with two speeds Numerical display for working height Planer table made of gray cast iron The planer table is mounted on four large trapezoidal thread spindles for maximum stability and precision Four feed speeds Optional with two rollers in the planer table Standard with noise and chip protection curtain at the workpiece infeed and outfeed Roller clamping pressure adjustable Front infeed roller with helical gears Outfeed roller with rubber coating Powerful industrial motor Equipment details TERSA models with Tersa planing cutter block Planing cutter change in seconds When the machine starts, the planing cutters are automatically tensioned by centrifugal force - self-locking The cutter overhang adjusts automatically without the use of setting gauges Work table The work table is mounted on four large trapezoidal thread spindles, which ensure maximum stability under all working conditions Standard with electric table adjustment Thanks to the special lifting device, the table position is maintained perfectly even without locking Helically geared steel infeed rollers for consistent and even wood feed Second, rubberized feed roller at the outfeed Crodpfed Hx E Isx Aqvji Solid anti-recoil guards prevent workpiece recoil A 4-cutter block ensures an optimal planing result Dimensions and weights Length approx. 1170 mm Width/Depth approx. 1003 mm Weight approx. 660 kg Dust extraction connection Dust extraction nozzle diameter (planer table) 150 mm Drive power Main motor 7.5 kW Installation information Space requirement (length) 1170 mm Space requirement (width/depth) 1003 mm Space requirement (height) 1197 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Machine body length 1170 mm Machine body width/depth 705 mm Length 1000 mm Width 2000 mm Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Thickness Planer table length 520 mm Planer table width 1000 mm Working height min. 3.5 mm Working height max. 250 mm Working length min. 210 mm Maximum chip removal 8 mm Electrical data Connection voltage 400 V Planing cutter block Type TERSA Diameter 120 mm Number of planing cutters 4 pcs Speed 4500 min⁻¹ Planing width max. 520 mm Feed Speed 5/8/12/18 m/min

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Surfacing unit Surfacing length: approx. 2,750 mm Planing width: 440 mm Surfacing knives: 3 MACHINE DETAILS Manufacturer: Panhans Type: 324 Machine type: Surfacing planer Crodj Adu Ixepfx Aqvoi Length: 2,900 mm Width: 900 mm Height: 1,200 mm Weight: 700 kg

Condition: excellent (used), functionality: fully functional, from a large DEMAG stock with numerous gearboxes GEARBOX SET Part Number 82452533 DH1000 3-speed, i=112.3 3 DEMAG gearboxes DH1000 in top condition, like new Original price per unit: €23,135.06 net, now €16,900.00 net per unit 4 Plug-in shafts / coupling shafts DH1000H16, Part No. 82417633, new. Original price per unit: €1,796.76 net, now €1,290.00 net per unit Thousands of DEMAG spare parts in stock Free shipping within Germany! Crodpov T Ti Tjfx Aqvsi Information: over 30,000 DEMAG spare parts and components in stock! Demag crane parts warehouse

Condition: good (used), Year of construction: 2019, functionality: fully functional, power: 4 kW (5.44 HP), For sale is a Felder AD 741, a combination jointer and thickness planer manufactured in 2019. This machine is suitable for professional use in carpentry and woodworking shops. Technical data: - Manufacturer: Felder - Model: AD 741 - Year of manufacture: 2019 - Motor power: 4.0 kW - Connection: 400 V, 3 phases, 50 Hz - Current consumption: 8.6 A - Jointer table width: 410 mm - Thickness planer table width: 404 mm - Jointer table length: 2,000 mm - Thickness planing height: approx. 3–230 mm - Feed rate: 6 / 12 m/min - Max. material removal: approx. 4 mm - Weight: approx. 500 kg The Felder AD 741 allows switching between jointer and thickness planer functions. Please refer to the images for the exact equipment of the machine offered, in particular the cutterhead and any special accessories, or inquire if interested. Crsdps Ahqxwjfx Aqvoi Inspection is possible by arrangement.

Condition: good (used), Year of construction: 1989, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 8 A, input frequency: 50 Hz, type of input current: three-phase, planing width: 530 mm, tool diameter: 110 mm, number of blades: 4, rotational speed (max.): 5,000 rpm, total length of planing tables: 880 mm, total width: 880 mm, total height: 1,150 mm, overall weight: 660 kg, S530i thickness planer, - Planing width 530 mm, - Planing height 300 mm, - Table length 880 mm, - Feed rate 5/8/12.5/19.5 m/min, - 4-knife cutterhead, diameter 110 mm, - Speed 5000 rpm, Crjdpj Ahnliofx Aqvei - Motor 4.0 kW, - Electrically adjustable table height, - Digital display for reading the thickness, - L x W x H 1070 x 880 x 1150 mm, - Weight 660 kg.

Condition: new, Year of construction: 2023, functionality: fully functional, CHILLER UNIT 290 kW – 2 separate refrigeration circuits, shell-and-tube heat exchanger, R32 Cooling capacity: 290 kW at 7/12°C and 35°C ambient temperature Shell-and-tube evaporator for efficient heat transfer and compact design Low-GWP refrigerant R32 Four compressors in two separate refrigeration circuits for high operational reliability and flexible load distribution Low-noise design thanks to optimized sound insulation Csdpfx Asu Au I Tsqveri Completely framed compressor enclosure for efficient protection, easy maintenance, and reduced noise emission Winter package allowing operation at ambient temperatures down to -20°C Ideally suited for industrial processes.

Condition: used, total width: 2,100 mm, total height: 2,400 mm, Year of manufacture: 2002 Colour: Blue Empty weight: 3.000 kg Dimensions (LxBxH): 410 x 210 x 240 cm Price: On request - Details: - └ Description: Needs repair - Year: 2002 - CE marking present: Yes - Serial number: 96164 - Number of spindles [pcs.]: 6 - └ Spindle 1: - - Spindle type: Bottom - - Spindle diameter [mm]: 40 - - Tool present: Yes - └ Spindle 2: - - Spindle type: Right - - Motor power [kW]: 11 - - Spindle diameter [mm]: 40 - - Tool present: Yes - └ Spindle 3: - - Spindle type: Left - - Spindle diameter [mm]: 40 - - Tool present: Yes - └ Spindle 4: - - Spindle type: Top - - Motor power [kW]: 11 - - Spindle diameter [mm]: 40 - - Tool present: No - └ Spindle 5: - - Spindle type: Top - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - - Tool present: Yes Cedpfx Aqe Ahx Tqsvsri - └ Spindle 6: - - Spindle type: Bottom - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - - Tool present: Yes - Feed table length [mm]: 945 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 14 - Tool type: Standard - Conveyor drive: Cardan drive - Lubrication system: Manual - Diameter extraction nozzle [mm]: 140 - Voltage [V]: 400 - Fuse [A]: 63 - Transport dimensions: 4100mm x 2100mm x 2400mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 554251, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: AC, planing width: 630 mm, tool diameter: 125 mm, actuation type: electric, overall weight: 1,260 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Martin T45 Thickness Planer – Year of Manufacture 2017 – 630 mm Planing Width For sale is a Martin T45 thickness planer, year of manufacture 2017, in good condition. The machine impresses with its robust Martin construction and excellent processing quality. Thanks to the two rubber-coated feed rollers, the workpiece is reliably transported and guided evenly through the machine. This makes the T45 ideal for professional use in carpentry and joinery workshops. Technical Data - Manufacturer: Martin Maschinenbau - Model: T45 - Year of Manufacture: 2017 - Planing Width: 630 mm - Max. Spindle Speed: 5,000 rpm - Electrical Connection: 400 V / 50 Hz / 3 phases - Rated Current: 30 A - Equipment: Two rubber-coated feed rollers - Dust Extraction: Dust extraction connection including dust extraction hose Condition and Inspection The machine operates perfectly and impresses with its smooth workpiece transport. It can be inspected on-site and tested while powered on after prior arrangement. This allows you to personally verify the function and condition. Collection and Invoice - Inspection and test run possible before purchase - Dust extraction hose included in the scope of delivery - Invoice with VAT shown - For intra-community deliveries to eligible companies in other EU member states, billing with 0% Luxembourg VAT is possible if the legal requirements are met. If you have any questions or are interested in an inspection, please do not hesitate to contact us. Crjdpe Ahd Tdofx Aqvji

Condition: ready for operation (used), machine/vehicle number: 50321997, functionality: fully functional, input voltage: 380 V, input current: 11 A, input frequency: 50 Hz, For sale is a jointer and thickness planer manufactured by Kölle. Crsdpj Aia Sysfx Aqvei The machine is fully functional and can be inspected at any time. Price does not include delivery.

Condition: used, Year of construction: 1989, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 8 A, input frequency: 50 Hz, type of input current: three-phase, planing width: 530 mm, tool diameter: 125 mm, number of blades: 4, rotational speed (max.): 4,900 rpm, total length of planing tables: 2,752 mm, total width: 900 mm, total height: 1,100 mm, overall weight: 810 kg, PF 530i surface planer, - Year of manufacture: 1989, - Planing width: 530 mm, - Table length: 2752 mm, - Electrically adjustable infeed table - Speed: 4900 rpm, Diameter: 125 mm, - 4-knife cutterblock, planing knives 530x30x3 mm - Adjustable fence, swivels 45°, - Motor: 4.0 kW / 5.5 hp, 400V, Cedpfx As Ahnr Esqvsri - Control panel located on top, - Dust extraction port: 160 mm.

Condition: good (used), Year of construction: 1988, machine/vehicle number: 33-533, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, planing width: 510 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 5,000 rpm, overall weight: 800 kg, Hofmann Thickness Planer, Model D 510-2 Planing width 510 mm, Maximum planing height 260 mm, Crodpfxs Af Uz No Aqvei Motorized table height adjustment with manual digital display, Planing shaft with 4 Tersa knives, 2 new rubberized feed rollers, Motor 4 kW, 380 Volt, 50 Hz.

Condition: good (used), machine/vehicle number: 17346, functionality: fully functional, power: 4.78 kW (6.50 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, planing width: 630 mm, number of blades: 4, rotational speed (max.): 5,500 rpm, HK 63 combined jointer/thicknesser - Planing width 630 mm, Codpj Ahmy Uefx Aqvsri - Cutterhead width 640 mm, - 4-knife cutterhead, - Table length approx. 2100 mm, - Planing height 2-230 mm, - Toothed steel infeed roller, steel outfeed roller, - 2 sliding rollers in the thicknessing table, - Motor 6.5 HP, - Speed 5000 rpm, - Feed rate 10 / 16 m/min, - Adjustable fence for the jointer

Condition: like new (used), Year of construction: 2019, operating hours: 137 h, T45 thicknesser from Martin with Tersa cutterhead Planing width approx. 630 mm Planing height adjustable electrically from 2.8 to 300 mm, with digital display for reading in 1/10 mm accuracy with positioning control. The control system also offers the possibility of incremental adjustment, i.e., you can, for example, set a value of 1 mm and then repeatedly press the start button to change the planing height by 1 mm each time, without having to set a new absolute height each time. Furthermore, 99 fixed values can be saved as a program. Drive motor 5.5 kW with automatic motor brake 4-knife Tersa cutterhead with new knives Feed rate 6 + 12 m/min Rubber-coated infeed roller Rubber-coated outfeed roller Planed machine table guided on four leadscrews and guides for optimal stability Low-noise design with soundproof hood Dust extraction port 160 mm Emergency stop at the front and rear New Tersa knives Operating manual CE marking Original paint, not repainted Carpet in original condition No scratches on the table!! Only 137 operating hours, i.e., only 25 minutes per week!!! Cjdpfsz Icvljx Aqvsri Dimensions approx. 1200 x 1300 x 1250 mm (L x W x H). Weight approx. 1200 kg. The machine can be demonstrated on site by appointment. We only offer machines that are available in our warehouse and ready for demonstration, see "other offers from this seller".

Condition: used, total width: 2,100 mm, total height: 2,100 mm, Year of manufacture: 2000 Crodpfez Tqznsx Aqvsi Colour: Blue Empty weight: 3.500 kg Dimensions (LxBxH): 370 x 210 x 210 cm - Details: - └ Description: Various repairs are needed - Year: 2000 - CE marking present: Yes - Serial number: 30728 - Number of spindles [pcs.]: 6 - └ Spindle 1: - - Spindle type: Bottom - - Tool present: Yes - └ Spindle 2: - - Spindle type: Right - - Tool present: Yes - └ Spindle 3: - - Spindle type: Left - - Tool present: Yes - └ Spindle 4: - - Spindle type: Top - - Tool present: Yes - └ Spindle 5: - - Spindle type: Top - - Tool present: Yes - └ Spindle 6: - - Spindle type: Bottom - - Tool present: Yes - Max. planing width [mm]: 260 - Min. planing height [mm]: 0 - Max. planing height [mm]: 140 - Feed table length [mm]: 860 - Feed roller diameter [mm]: 140 - Conveyor drive: Cardan drive - Lubrication system: Manual - Diameter extraction nozzle [mm]: 140 - Feed speed: Manual - └ Min. feed speed [m/min]: 6 - └ Max. feed speed [m/min]: 36 - └ Feed speed control: Continuously adjustable - Voltage [V]: 400 - Current consumption [A]: 141 - Fuse [A]: 160 - Power [kW]: 65.0 - Transport dimensions: 3700mm x 2100mm x 2100mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2011, Jointer-thicknesser combination machine Manufacturer: Martin Model: TP 300 Year of manufacture: 2011 Planing width: 530 mm Planing height: 3 - 250 mm Power: 5.5 kW Height adjustment: electric Cutter type: Tersa Number of cutters: 4 Max. chip removal: 8 mm Codpfxj Af Ur Ij Aqvori Infeed roller: Steel Outfeed roller: Rubber Feed rate: 6 / 12 m/min Dust extraction port diameter: 140 mm Motor brake: Yes Weight: approx. 1,000 kg

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Cedpfe Ad Ix Dsx Aqveri WORK AREA Table length: approx. 1,500 mm Planing width: 410 mm MACHINE DETAILS MACHINE DIMENSIONS Length: 1,500 mm Width: 800 mm Height: 1,500 mm Weight: 500 kg

Condition: used, total height: 2,000 mm, total width: 1,300 mm, total length: 5,900 mm, Year of manufacture: 1990 Colour: Green Empty weight: 7.500 kg Center-height: 250mm Table-length: 2300mm Travel grinding-spindel: 200mm Gear diameter: 300 mm Module range: 0.5 mm – 8 mm Helix angle: ±35° Max. workpiece weight: 100 kg - Year: 1990 - Documentation available: No - CE certificate present: No - Serial number: 018.0402 - Drive system: CNC Cedpfx Aozy E Tajqvjri - Control system brand: Optronic - Control system type: CNC D140 - Horizontal/vertical: Horizontal - Model: Gear hobbing machine - Min. module [mm]: 0.5 - Max. module [mm]: 8 - Max. workpiece width [mm]: 2300 - Max. workpiece height [mm]: 500 - Max. workpiece weight [kg]: 100 - Table length [mm]: 2300 - Transport dimensions: 5900mm x 1300mm x 2000mm (l x w x h) - Transport weight [kg]: 7500kg - Transport packages [pcs.]: 5 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Surfacing planer / Thickness planer Crjdpfx Aqe Ah Ufvsvji • Working length: 6,000 mm (6 m) • Working width: 800 mm (80 cm) • Working height: 600 mm (60 cm)

Condition: used, Year of construction: 2015, Four-knife 120 mm cutterblock Four selectable feed speeds Heavy cast iron construction Precision thicknessing table with central column guidance Crjdpez N Hfbefx Aqvsi 520 mm working capacity 2015 CE

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, operating hours: 50 h, Fimal thickness planer, manufactured in 2022, in like-new condition. The machine has been used for a maximum of 50 hours. Therefore, it is in very good condition! Crodpfxjz S Ulzj Aqvoi Working width: 63 cm Electric table adjustment Includes new Tersa replacement blades. Optionally, a matching Fimal PF530N jointer, manufactured in 2022, can also be purchased. See the last pictures. - Thickness planer Fimal S63A (individual price: €7,500) - Jointer Fimal PF530N (individual price: €6,500) Total price for both machines together: €12,500 Optionally, a suitable dust extraction system can also be purchased. The machine can, of course, be inspected and thoroughly tested while powered on. The sale is to commercial businesses with exclusion of liability for defects. No guarantee, warranty or right of return.