Provisional specification.....
220 X 120mm capacity
2m infeed table
4 spindles
Bottom x 5.5kw
Right }
Left } Single x 11kw for right / left spindles
Top x 11kw
Chain drive / spring pressures
Bvqcuoqtro
6000 rpm x 40mm dia spindles
Feed speeds 6 - 12m/min
Safety cover
6 shafts: bottom/right/left/top/bottom/right
planing width max. 140 mm
planing height max. 120 mm
Bxamhzp9lu
Chain feed
Spring pressure of the feed rollers
Technical characteristics
Working width: max 230 mm, min 15 mm
• Working height: max 150 mm, min 10 mm
• 2000 mm chrome feed table
• Drive shaft drive shaft 4 kw, speed 6 to 24 m / min
• Chromed toothed feed rollers up to the 1st spindle, rubber after; pneumatic pressure and rise / fall
• Electric height adjustment
• Mechanical display on spindles, except for dressing
• Power supply 400 V, 50 Hz, emergency stop, switches
Composition:
1. Horizontal lower spindle
- 7.5 Kw
- 6000 r...
Four-sided planer TOS Svitavy Master FWH 18
Width of workpiece max / min - 180/15 mm
Height of workpiece max / min - 120/6 mm
Feed speed - 8/16 m / min-1
Spindle speed - 6000 min-1
Tool diameter - 123 mm
Jxavdhrt
Diameter of the shaft - 40 mm
Insertion table length - 2500 mm
Number of working spindles - 4
Diameter of the input discs - 120 mm
Min. Length of the machined part - 300 mm
Engines:
Lower 5.5 kW
Right 5.5 kW
Left 5.5 kW
Above 5.5 kW
Current 38-40 Amp, 400V
Dimensions 3050 * 1250 * 1...
Friulmac FN3 1300
- working length from 26cm to 130cm
- width up to 16cm
- 5.5kW saw motors
- smooth regulation of the feeding speed
Gujtzxql
A very nice copy
- Machine frame
1 Monobloc base frame made of heavy steel.
- The machine frame is made of high-grade steel and is very heavily constructed by, among other things, the application of various sketch plates and reinforcement ribs.
2 The infeed table made of special ground steel length 2500 mm.
- Input table of steel ground length 2500 mm.
- Worktable Herdox HB 400
- Grooved V-belts on all spindles
- Separate motors for each spindle
- Electromotive high/low adjustment incl. feed rollers and pressure...
Working width 300 mm
Working height 250 mm
Working height 4-side 200 mm
Number of spindles 4
Spindle configuration b-t-r+l
Spindle diameter 60-60-50-50 mm
Jointer for spindle 1-2
Motor power 37-45-11-11 kW
Working width adjustments Digital adjustments
Working height adjustments Digital adjustments
Feed speed 20-200 m/min
Feed motor 15 kW
Feed-system Cardan
Driven bed rollers 3
Infeed rollers 3
Outfeed rollers 1
Tools horizontal 200x300x60 Z12
Constant table height ca. 900 mm
Chip removal bottom ...
Upper and Lower Hydraulic Advancement Group.
Electric command board.
Bdudwmfh89
Working range 330 mm
Feed speed 0/100 m / min approx.
Maximum height 130 mm
Maximum width 330 mm
Working width 860 mm
Working height 310 mm
Working height 4-side 210 mm
Number of spindles 4
Spindle configuration b-t-r+l
Spindle diameters 50 mm
Spindle rotation speed 4500 U/min
Outboard bearings for spindle 1-2
Motor power 22-22-7,5-11 kW
Working width adjustments motorized
Working height adjustments motorized
Feed speed 6 - 30 m/min
Feed motor 5,5 kW
Feed-system Cardan
Constant table height 940 - 950
Chip removal bottom 10 mm
Chip removal top 16 mm
Chip removal right 20
Chip removal left 20...
DYRA 40 planing-saw is designed for double-sided planing with simultaneous lengthwise cutting of wooden elements for slats, battens, etc. After dismounting the saws it is possible to use the machine as a planing and thicknessing machine or as a thicknessing machine itself.
The DYRA 40 combination planer consists of three basic processing groups:
levelling machine - processing the workpiece from the bottom
Thickening machine - processing the workpiece from the top while maintaining the required t...
Four sided planer Leadermac 423
Maximum planing width 230mm
Maximum planing height 150mm
Spindle diameter 40mm
Stepless feed regulation
Bvjhpl2ncc
Feed on gimbals
Countertop lubrication pump
Electric lifting of the body
Spindles sequence: bottom/right/left/top
Each spindle on a separate motor
CE
Year 2005
Technical characteristics
Used Weinig Heavy Moulder 7 PO
UNIMAT 30EL
Mechanization:
Hydraulic introducer, short table.
Capacity:
Useful width = 20-300mm
Useful height = 8-200mm
Groove table, 7.5kw drive (from 6m to 36m / min), pneumatic presser, short wood device.
Composition:
Lower horizontal shaft (15kw)
Straight spindle (11kw)
Left spinner (15kw)
Upper horizontal shaft (30kw)
Lower horizontal shaft (18.5kw)
Upper horizontal shaft (18.5kw)
Lower horizontal shaft (22kw)
Total p...
Thickness planer GRIGGIO PSA 520
is optically and technically in a very good, as good as new condition, the machine comes from a small carpenter's workshop with 2 people and has only stood the last years, because the former owner has not found a successor for his company, it has only been used very little
everything works perfectly
with backstroke safety device
the planing knives can be changed very easily, there are 4 normal strip planing knives, you get a setting gauge with it
the chips can be...
Sale of a four-sided planer by order of a customer.
Technical data can be seen on one of the advertised pictures.
K8zqxhnc
4-SIDE PLANER MOULDING MACHINE WEINIG UNIMAT 17 A
Technical specifications:
Working width: max 180 mm
Working height: 120mm
Motor power per spindle: 4 KW
Spindle speed: 6000 rpm
Diameter of the spindle: 40 mm
Smallest tool diameter: 100mm
Max. tool diameter: 160mm
Max. diameter of the vertical spindles : 180mm
Max. tool diameter of the 2nd right spindle: 195mm
Max. tool diameter of the upper spindle: 200mm
Max. tool diameter of the lower spindle: 180mm
Feed speed variable: 6 - 18 m / min
Spindle...
transport device for a four-sided planer
The device consists of a transverse feeder with carriers on
chains
longitudinal belt collector behind a planer with a bulldozer
0d0yweu
take-up rollers and a second pick-up bulldozer with belt and buffers
4-shaft moulder
Bfrpzmxxbm
finished piece max 260 x 180 mm
4 spindles
possibility to profile 45 mm
Technical characteristics
capacity 230 mm x 160 mm, mini 8 c 20
Pvph2y
4 hp
infeed table 2000 mm, chrome
digital display of the useful height
4 tool holders
6000 rpm
pneumatic pressure drive
composition:
1st lower horizontal shaft: 7.5 hp
2nd right vertical shaft: 7.5 hp
3rd left vertical shaft: 7.5 hp
4th upper shaft: 10 hp Maximum advance speed: 6 à 26 m/min Power and Motors
Overall dimensions
Length: 3750 mm ...
Infeeder for moulder
Brand:TP (Swedish made)
Robust compact infeeder for moulder.
The feeding is made through 4 driven rollers. The bottom roller are movable and due to that
the feeding is very safe and reliable.
Imie8ndnu
Frequency controlled gear motors are given a silence and smooth machine.
Feeding speed 5-50m/min
Buffer chains L2100
Shortest material length 400 mm
Power 400 volt, 50 Hz, 3 phase
Stock no:2000534
MAIN FEATURES :
Hb8yfzt8m
Capacities:
- Finished wood width 45 to 490 mm
- Finished wood height 12 to 305 mm
Composition:
1 - Lower shaft, power 22 KW (30CV)
2 - Upper shaft, power 22 KW (30CV)
3 - Right spindle moulder, power 11 KW (15CV)
4 - Left spindle moulder, power 11 KW (15CV)
5 - Lower shaft, power 18.5 KW (25 hp)
6 - Upper right chamfer
7 - Upper left chamfer
Feeding :
- Metal rollers driven by gimbals
- Power gear motor: 7.5 KW (10 hp)
- Speed variator with potentiometer on the...
'KUPFERMUeHLE' 4-SIDE PLANER mod. VUIN 1025,
Working width max 1000 mm
Planing heigth max. 200 mm. (4-side)
n.4 Adjustable feed speed from 4 to 18 mts/min.
Motorized bottom and top driving rollers
Bdlsovudoe
Motorized lifting of the working table.
Bkx2jy9
Working table at fixed height
Motor powers:
1st Bottom planer HP 7,5
2nd Upper planer HP 10
3rd Vertical right HP 7,5
4th Vertical left HP 10
Feed HP 2
Lifting HP 1,5
SECOND-HAND MACHINE, in working conditions
Working width max mm 180
Working height max mm 120
Number of spindles 4
Table length mm 2500
Seperate motor per spindle
Further technical details
Working width min mm 30
Working height min mm 10
Bonwwc870z
Workpiece length min mm 340
Main motor power kW 5.5
Feedrate max m/min 24
Continuously variable feed
Motoric adjustment Planing height
CE marking
working width 8 - 180 mm
max. working height 5 - 120 mm
feed speed 8 m / min.
motor horizontal spindles 2 x 4,0 kW
motor vertical spindles 1 x 5,5 kW
spindle speed 6000 UpM
spindle diameter 40 mm
infeed table length 2000 mm
QTS system (autom. hight and width positioning)
Incl. 4 pcs LEITZ Centro-fix tools with new knives
Incl. dust collector hood
weight approx. 1200 kg
machine dimensions approx. L x W x H = 3000 x 1000 x 1450 mm
Gcze2wv
Advise used machines:
• Technical data without ob...
Technical characteristics
Capacity 230 x 130 mm
Centralized lubrication
Pneumatic pressure
Bp3uuthiwq
Short wood training
Composition:
Thicknesser 7.5 kW
Straight spindle 7.5 kW
Left spindle 7.5 kW
10 kW planer
Lower planer 7.5 kW
Universal 15 kW with inverter Entry table length: 2500 mm Number of tools: 6 dont un universel Maximum advance speed: 5 à 25 m/min Power and Motors
Overall dimensions
Fulda 630 double-sided planer
- after the technical review
- German production
- very good condition
- heavy cast construction
TECHNICAL PARAMETERS:
planing width 630 mm
planing height 200 mm
engine power 2 x 5.5 kW
two types of feed speed 10 and 17 m / min
two auxiliary rollers in the table top
three upper steel toothed pulling shafts
upper upper smooth receiving shaft
four knives on the shaft
shaft diameter 125 mm
row of anti-jet pawls
length of the pre-worktop 1000 mm
spigot diameter 120...
Technical data:
Max planing width: 180 mm
Max planing height: 150 mm
Spindle diameter: 40 mm
Number of spindles: 4
The order of the spindles: down, right, left, up
Each spindle on a separate motor
Toothed pulling shafts: 3
Extraction port diameter: 120/150 mm
Smooth feed regulation: 3-20 m / min.
Cardan feed
Pump for lubrication of the working table
Pulling rollers on the table top
Pressure: 6 atm.
Bws7zyij9k
Electric lifting of the body
Power supply: 400V
Total power: 12.5 kW
Producer: SCM
Ov...
Four sided planer Leadermac 723
Maximum planing width 230mm
Maximum planing height 160mm
7 spindles bottom/right/left/right/top/bottom
All spindles adjustable right/left up/down
Spindles diameter 40mm
Pneumatically adjustable spindles
Spindles equipped with brake
Table top adjustable up / down
Central lubrication of the table top
Stepless feed regulation 6-24m/min
Feed on cardan shafts
Electrical planing height adjustment
CE
Year 2006
Jwynz3
Weinig 6-head
uh, spindles:
down - left - right - up - down - left
spindle number 6
width of the planer ca. 160 mm
Planer height ca. 120 mm
H2mb3b2
table length ca. 2000 mm
table greasing
feed rate
from 6 to 18 m/min.
- With 5 spindels
- Grooved table for short pieces
Rmhtmign
Outstanding characteristics:
Sealed safety hood to reduce noise levels and prevent chips from splash
Adopting stepless variable feed speed, inverter feed speed of 6- 30 m/min
Each spindle driven by independence motor with powerful cutting
To fit with heavy – duty cutting as equipping with two pairs of high precision bearing at two ends of spindle assembly
Centralized spindle adjustment on the front panel is easy to work
Hard Chromed e...
Technical characteristics
Capacity 160 x 130 mm
Entrance table 2.50 m
3 KW thicknesser
Right spindle 3 KW
Left spindle 3 KW
Right spindle 4 KW
5.5 KW top planer
3 KW lower planer
Mechanical pressure
Advance 2.2 KW variable 6 to 40 m / min. Number of tools: 6 Power and Motors
Bmdge0cobt
Overall dimensions
Collar shelving, double-sided, 4, 16 m high, 1, 20 m arms, 500 kg per arm - new -:
Price from site including loading!
1 shelf unit with 4 stand €1.850.-(net)!
A cantilever rack system, hot-dip galvanized, consisting of:
4 shelf stand double-sided about 4, 16 m high, hot-dip galvanized
IPE 160 / 80
with each 2 x 3 verstellb. Poor 1.20 m, 500kg load capacity per arm
with associations about 1.30 m
Shelf stand double-sided about 4160 mm high, hot-dip galvanized
Foot and arm depth 1200 mm wit...
surface planer make SAC type FS 430 HP 4
Masch.# 102g.05.84 Year of construction 1984
Technical data:
dressing width 430 mm
Knife of the four-blade shaft 430 x 35 x 3.0 mm
max. fold depth 20 mm
Table length 2900 mm
table length 1550 mm
delivery table length 1310 mm
Table width 430 mm
Diameter of the knife shaft 120 mm
Cgclrtee
Blade shaft speed 4500 rpm.
Table height 800 mm
Dressing fence 1300 x 160 mm
Stop inclination 0 - 45
Drive power 4,0 PS
Weight approx. 745 kg
Outer dimensions approx. 2900...
Four-sided planer SCM Superset NT
number of spindles 6
electronic spindle adjustment
Coq0kep
powerloock system
many spindles included with cutters
production year 2008
4 sides Guiliet cross section Max. 180/120 mmElectronic height adjustment via scale 4 shafts4 motors can be switched on via sequential switchPlaner heads (blade can be clamped with Allen key) and can be easily adjusted to different masses
Ba8qdgrck
- max. planing width 220mm
- max. planing height 120mm
- diameter of the spindles 40mm
- smooth feed adjustment 5-25m / min.
Jwxuki
- electrically adjustable planing height
- electrically adjustable planing width
- 5 universal head
Order of heads:
1 Lower 7.5kW
2 Right 11kW motor shared with left head
3 Left as above
4 Mountain 7.5kW
5 Universal 5.5kW
Technical characteristics
Profiling kit
electronic height and width adjustment with memory
capacity 230 mm x 130 mm
plan 5kW,
Right spindle and Left spindle 7.5kW,
planer 7.5kW,
horizontal lower spindle 5.5kW,
Bmdgbhukrh
universal spindle4kW
lubrication pump
centralized lubrication Entry table length: 2500 mm Number of tools: 6 Power and Motors
Overall dimensions
4-sided planing machine
Bubwgq29eq
Brand: Weinig
Type: P 26 S
Year: 2002
Working width 20 - 230 mm
max. working height 120 mm
Feed rate 5 - 24 m/min.
Spindle arrangement:
spindle 1 - bottom - 5,5 kW
spindle 2 - right - 7,5 kW
spindle 3 - left - drive together with right spindle
spindle 4 - top - 7,5 kW
spindle 5 - bottom - 4 kW
feed motor 3 kW
feed speed 5 - 24 m/min.
operating panel SIMATIC OP7
ATS system
automatic positioning for left spindle hight adjustment
spindle diameter 40 mm
rotati...
Model Melanto 450-4 four shafts with floating cutters + lower corner edgers.
Consisting of a roller conveyor at the Costa entrance and one at the exit of the Stival
Rocar soundproofing cabin
TO SEE FOR VERIFICATION OF THE EXCELLENT CONDITION OF THE PLANER
Buuzp3exlv
NEGOTIABLE PRICE
Four sided planer Weinig Unimat 23
working width 230 mm
Bucrycsay8
number of spindles 7
spindle arrangement:
Bottom/right/left/left/left/left/left/left/left/left/left/left/l eft/left/left/left/left/left/left/left/left/left/left
total power 59 kw
year of production 1995
spindles revolution speed 8000RPM
smooth regulation of feed speed
Location
Kłodawa 66-415
Conditions of delivery
OWN RECEIPT
Cost of delivery
Customer cover
Start type
to be agreed
Description
Comments
7x99grk
Four-sided planer, banding machine, Gabbiani spichetting machine
Max planing width: 160 mm
Max planing height: 100 mm
Min. Element length: 180 mm
Spindle diameter: 30 mm
Number of spindles: 6
Spindle order: down
rights,
left,
Mountain,
Mountain
bottom
Crawler feed: top, bottom
Smooth infeed adjustment: 4 - 34 m / min
It is possible to work feed at a...
4 - side Thicknessing and planing machine with
side heads.
Max working width 760 mm
Max working height 200 mm
Feeding speed up to 23 m/min
Mvbmwc
Technical characteristics
Variable advanceDigitized commandInferior planerLeft routerRight routerInferior planerSuperior planerUniversal shaft
capacity 230 x 130
feed speed 6/36 m / min
short table for mechanization
thicknesser, Shaft 50 mm, 7.5 Kw
right spindle moulder, 50 mm shaft, 7.5 Kw
left spindle moulder, 50 mm shaft, 7.5 Kw
right spindle moulder, 50 mm shaft, 7.5 Kw
left spindle moulder, 50 mm shaft, 7.5 Kw
Hjp3tqp
top planer, 50 mm shaft, 7.5 Kw
lower plane, Sha...
WEINIG UNIMAT SUPER 4 planer
- machine in stock
- after the technical review
- German production
- year of production 2006
- specialized machine for planing wood for gluing
TECHNICAL SPECIFICATIONS:
- planing width 150 mm
- planing height 50 mm
- diameter of the spindles 40 mm
- equipped with tools
- the first lower head 11 kW 6000 U / min
- second upper head 22 kW 7000 U / min
- the third lower head 5.5 kW 6000 U / min
- 2.2 kW feed motor
- adjustable feed on the inverter
- feed on cardan sha...
SECOND-HAND PIT HYDRAULIC CLAMP COMEC MOD. FS R 4+2
- Hydraulic pump power HP 5.5 (kW 4.0)
- Cylinders ø 60x150 mm
- Inclination of the locking planes in:
* vertical ±10°
* horizontal ±20°
- Working dimensions mm 520x600
- Dimensions FS R 4+2 mm 1700x1700x1300 H
Bg0vzlhnt2
- Weight kg 1200
- volt. 400/50
- s/n 060109
- CE rules year 2006
- Kw 11.1
- matr. 543
- CE rules (year 1997)
Double sided planer with multi-blade cutting blade QING CHENG
working width 200 mm
planer up / down
multi-blade with lower shaft
Rxtd2ca
possibility of planing and cutting at the same time
Industrial 4-sided moulder FEELER, model FE7-23C. Strong machine, ment for heavy-duty working operations.
TECH. SPECS:
Ogobb
- Working width: 18 - 230 mm
- Working height: 6 - 160 mm
- Min. length: 240 mm
- Feed speed: from 7 - 36 m/min
- spindle number: 7
- weight: 7500 kg
Moulder 4 heads Master
Maximum planing width: 220mm
Minimum planing width: 15mm
Maximum planing Height : 120mm
Minimum planing height : 6mm
Puiegu
Year of production ~2000
Spindle diameter : 40 mm
Feeding table: 2000mm
Moulder with 4 heads and possibility to mount 5th head
Spindle layout
Bottom Horizontal: 5 kW
Right Vertical: 5 kW
Left Vertical: 5 kW
Upper Horizontal: 5kW
There is a possibility to mount aditional 5th head in the machine.
Machine is in our factory, we bought it new from dea...
