Used Flame-Cutting machines for sale (34)

Condition: ready for operation (used), Year of construction: 2014, operating hours: 26,400 h, Functionality: fully functional, machine/vehicle number: 1530PG, Submission of a bid obligates timely collection by 29.07.! No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Table dimensions Table width: 1,500 mm Table length: 3,000 mm Islhccqowzw Inometi MACHINE DETAILS Control: Control panel Generator: Hypertherm 130XD EQUIPMENT Consumables and nozzle set Central vacuum system

Condition: used, CNC flame cutting machine BACH type ACW 2500 Flame cutting machine with CNC control NBS 400 Machine. No. 14 561-06 Year of construction 2006 Cutting area 2500 x 6500 mm track length 8000 mm Track width 3345 mm Track height 650 mm 2x machine cutting torch with cutting table Itolhccsf Ncadoqmei

Condition: used, Year of construction: 2016, machine/vehicle number: 0605-240010, FICEP Flex FRC 1201 coping robot The Ficep FRC 1201 coping machine is part of the latest process in automatic CNC controlled thermal coping process. This modern CNC-controlled coping robot system is suitable for fast thermal cutting and notching of profile types H / U / L / flat and square tubes. The steel profile is positioned in the system at the position to be cut using a pulling gripper measuring carriage via the roller conveyor. A robot arm with the cutting units (oxyfuel or plasma) cuts the profiles at the selected position. The cut or notched finished components either fall into the collecting tray or are pushed out of the system by the measuring arm. Thermal cutting units: This Ficep profile support notching system Flex FRC 1201 is equipped for thermal cutting with oxyfuel and/or plasma. A Hypertherm HYPERFORMANCE PLASMA HPR 260 XD suitable for material thicknesses up to 32 mm is used as the plasma power source. Thicker material thicknesses or phase cuts greater than 32 mm are cut with the oxyfuel cutting unit. Transport system: On the infeed side in front of the Ficep Flex FRC notching system is a chain drag cross conveyor with a length of 11,150 mm. The profiles (components) can be conveyed in both directions. The profiles are then transported into the machine on a stable roller conveyor with a gripper measuring carriage. The system is designed for 12 m long profiles and therefore has 12 m roller conveyors with a roller conveyor width of 1. 300 mm on the infeed side and 12 m on the outfeed side.300 mm. 4 chain tractors with a length of 6,450 mm are available after the notching system to transport the finished components to the outfeed side. Ijlstwm Ubehccqmjti Mitrol CNC control and Pegaso software: The system is controlled by a modern CNC control system from Mitrol. The reliable CNC control is from Ficep's own manufacturer Mitrol with the Pegaso software including remote maintenance option and data transfer interface. Torit DCE filter unit The filter unit for the dirt extraction is from Donaldson Torit DCE Safety: via fence and light barriers Max. profile cross-section: 1,220 mm. Profile cross-section : 1,220 x 600 mm Min. material length : 2,500 mm Working height : 865 mm Weight: 7000 kg Weight of cover firing unit : 1200 kg This modern Ficep Flex FRC 1201 coping robot system is in very good condition.

Condition: good (used), Year of construction: 1980, Oxy-fuel cutting machine with optical control Itolhevtyf Uoccqmoi Manufacturer: ESAB Model: UXC 12.5 Year of manufacture: 1980 Support table: 1,250 x 2,000 mm 1 oxy-fuel torch 1 plasma torch with ESAB LPC50 power source alternating operation 17725ä

Condition: new, table width 1500 mm table length 3000 mm burner heads 1 Control CNC CNC plasma cutting system *NEW - AVAILABLE FROM STOCK* Furnishing: Cutting area 1,525 x 3,050mm Itelhccqoiid Hwemji Consisting of guiding machine, CNC control Plasma torch holder incl. torch height control, incl. Radio remote control and cross-laser for positioning, 1 license FastCAM programming software with Auto Nest Function and DXF,DWG import. Autogen set consisting of gas control solenoid valve, injector Machine torch torch holder, capacitive Height control, cutting range 10 - 50 mm plasma system Hypertherm Powermax 85 Sync CPC System Cutting range 1 - 20mm, cutting gas air Machine torch Smartsync 180° - 15.2 meters Machine is offered ex works. Without accessories (dye, anti-rust, aint mushroom, etc.) - further costs on request!

Condition: excellent (used), Year of construction: 2010, machine/vehicle number: KC1200-Nr.305473, Kaltenbach Cutting Robot Unit : KC 1200 with Kuka Robot + Transportation Unit T13 / M150 - Year : 2010 Roller Track Feeding : total ca. 17,50 m / built-on ca. 13,50 m Cross Conveyor Feeding : Framework / Electronic built-in in Electronic Cabinet Roller Track Carriage : total ca. 17,50 m / built-on ca. 10,00 m Cross Conveyor : Framework / Electronicbuilt-in in Electronic Cabinet Itoljk Tzxqehccqmoi Security Fence : ca. 36,00 m Security Photo-Electric Guard

Condition: ready for operation (used), Year of construction: 2012, Functionality: fully functional, working width: 2,000 mm, working length: 3,000 mm, table width: 2,000 mm, overall weight: 350 kg, MicroStep MasterCut 3001.20 G - dimensions (LxW): 3000x2000 mm - 1x autogenous cutting head - Teka filter unit Available from October 2025. Itslhccjwpgdusqmsi Price = collection price exworks

Condition: used, Year of construction: 2011, FICEP GEMINI MODEL HP25 BED SIZE 10000mm x 2500mm DRILLING HEAD with 6 station automatic tool changer. 80mm CAPACITY. HYPERTHERM HPR 260XD 65mm MILD STEEL CAPACITY. GE FANUC CNC CONTROL Ielswfhknehccqmjti DUST EXTRACTION SYSTEM

Condition: used, Year of construction: 2016, machine/vehicle number: 0401-230047, The FICEP Tipo G31 sheet metal processing center for the economical processing of sheet steel and flat steel in steel construction and the steel trade. Ijlhsrr Sqljccqmsti The Ficep Tipo G31 LG can drill, center punch, thread, countersink, mark, mill, oxy-fuel cut and plasma cut flat steel or sheet metal with a maximum sheet width of 3,100 mm and a sheet length of 14,000 mm in a single system. The CNC-controlled sheet metal processing center is equipped with two 26 kW drilling units. 2 tool changers, each with 24 tool stations for ISO 40 tool holders, are available for automatic tool changes. The system is suitable for sheet sizes: Sheet width: minimum 200 mm, maximum 3100 mm; sheet length: minimum 2500 mm and maximum 14,000 mm. A powerful and modern Hypertherm HPR 400 XD plasma source is available for plasma cutting. The system also has an oxyfuel cutting unit for thick material thicknesses. The drilling unit with a high torque and a spindle speed of up to 6,000 rpm is designed for drilling with carbide tools such as solid carbide drills, Nenok Multiplex interchangeable insert tools as well as for use with HSS coolant channel drills with a drilling diameter of 10 mm to 40 mm. The Ficep Tipo G31 machine is in very good condition and has only a few operating hours.

Condition: good (used), Year of construction: 2011, CNC Gantry Flame Cutting Machine Manufacturer: Microstep Model: MasterCut-AM 9001.20 Year of manufacture: 2011 CNC control: iMSNC with integrated network card Working area: 2,000 x 9,000 mm Extraction table 1 oxy-fuel torch Cutting thickness up to 150 mm 1 Kjellberg plasma marking unit Laser pointer Technical details: 1x oxy-fuel torch (fully automatic) 1x plasma marking unit (fully automatic) Kjellberg Finsterwalde MicroStep® CNC machine control iMSNC with integrated network card LCD operator units on the gantry Laser pointer with automatic offset transmission iMSNC control parameter database / Windows® Programming system "AsperWin-Basic" for direct programming on the machine control Module Macro Library "AsperWin Select" Module NC Simulator "AsperWin NC-Sim" Module "Plasma Marking" (for scribing) via plasma source Module "THC" / Automatic height control via arc voltage USB 2.0 interface for data storage diagnostic module MicroStep® "iFDS Win" Islhoudn Rzjccqmsti Remote maintenance access via TeamViewer Central gas control via proportional valves Parameter database for 1 torch Energy supply lines Gas hoses for heating oxygen, cutting oxygen Acetylene machine cutting torch RHÖNA-Acetylene FIT+ 1 piece capacitive height control IHT / for oxy-fuel 1 piece electric ignition unit RHÖNA-Acetylene Double-sided wire safety (collision protection) of the portal bridge via emergency stop Kjellberg® plasma marking unit FineMarker Fully automatic support for FineMarker Kjellberg® plasma marking system FineMarker CNC interface for FineMarker / integrated into the CNC control Module for automatic control of the marking device

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, Good day, I am offering the following used flame cutting machine for sale: Type: MicroStep EasyCut 4501.20G Year of manufacture: 2021 Working area: approx. 4,500 x 2,000 mm Max. clearance height: approx. 300 mm Guides in X-direction: milled steel guides Drives: digital, maintenance-free AC servo motors with IRC Positioning speed: up to 25,000 mm/min Positioning accuracy: ≤ 0.10 mm/m Bidirectional repeat accuracy: 0.20 mm/m Control: MicroStep® control with MMI console and 17″ touchscreen iMSNC® module – assistant for loading CNC programs USB 3.0 connection option for storage device Remote maintenance module MicroStep RemoteDiagnostics® Flame cutting table with sectional extraction: 4,500 x 2,000 mm Grid cover in flame cutting table: 4,500 x 2,000 mm Oxy-fuel support: fully automatic Automatic gas console for one oxy-fuel torch: propane Machine cutting torch GCE® FIT +: propane Capacitive height control Active collision protection Tactile shut-off device for S49 guide rails LED signal column on the portal bridge (2 colors) Double-sided cable protection (collision protection) of the portal bridge via emergency stop AsperWin Basic ® – The 2D programming software (single user license) Machine was rarely used and is located in D-47623 Kevelaer Iteljwpgb Hohccqmei A machine demonstration is possible at any time by arrangement. Shipping costs according to effort! All information without guarantee! If you are interested or have questions, please contact Mr. Marwinski Tel.: +49 2835 445870

Condition: new, The Topaz plasma cutting machine is an advanced solution that is perfect for manufacturing operations where precision, efficiency and compact design are important. It offers reliability and high cutting quality and thus perfectly meets the requirements of modern companies. Main features: - Innovative technology solutions: Developed in cooperation with ECKERT and TEKA, offer modern functions and high performance. - Exceptional quality and reliability The machine is manufactured in Germany with components from well-known manufacturers, which ensures exceptional precision, durability and reliability. Thanks to the robust manufacturing according to demanding standards, the operating costs of the system are reduced to a minimum. Itslhccevmg N Hoqmji - Intuitive user interface: The machine's clear and easy-to-use control system speeds up work and increases the operator's productivity. - Excellent cutting quality: Thanks to the plasma systems from leading manufacturers such as Hypertherm and Kjellberg, the machine offers the best cutting quality. - The TEKA filter system: Provides clean air, which is especially important in small operations where space saving and air quality are crucial. During periods when the machine is not working, the system can act as an extraction system for welding or grinding work, eliminating the need for additional systems and reducing costs.

Condition: good (used), Burning cutting device with turntable ideal for welding stages burning Turntable diameter 285 mm maximum burning diameter 600 mm GES. Height 1150 mm Itslhccqjd Dti Ismoi Width 900 mm Depth 500 mm

Condition: ready for operation (used), Year of construction: 2009, Functionality: fully functional, track width: 3,000 mm, working range: 6,000 mm, total width: 3,800 mm, total length: 11,000 mm, material thickness: 70 mm, cutting capacity: 60 mm, Lind plasma cutting system with HiFocus 360I Hypertherm cutting unit including KWE 360 and PGV 3. Cutting table complete with extraction system. System is operational and in excellent condition. Demonstration available. New price €190,000.00 System is available immediately. Iolhccqowmq Tzomoti

Condition: good (used), Year of construction: 2016, FICEP 1201 FRC Minimum Profile mm 80 x 42 Maximum Profile mm 1220 x 60 1 x OXY FUEL Cutting Head 1 x HYPERTHERM HPR 260XD Plasma Torch. Dust extraction system. Itelhccqova Hfnomji

Condition: good (used), Year of construction: 1999, CNC portal flame cutting machine Manufacturer: Zinser Type: 2115 Year of manufacture: 1999 CNC control: CNC500 2 oxy-fuel torches Working area: 2000 x 4000 mm Filter unit 17725ä Islekhb Sqohccqmeti

Condition: used, Functionality: fully functional, CNC gas cutter for steel sheet. manufacturer - ZINSER Germany; type - 4205; control - CNC 500; Polish language, macros of typical figures; Islhccqjnxktcemeti data transfer to the machine - USB; gas - propane or acetylene and oxygen; track width of the working portal - 650 cm, it is possible to reduce the spacing; dimensions of the working table - 270 x 720 cm; working table extending from under the portal on a track 910 cm long; steel tub for waste slag. The device is connected, functional.

Condition: used, CNC flat steel drilling and cutting machine or plate drilling and cutting machine PEDDINGHAUS Type FDB 600 Plate drilling and cutting machine with CNC control FAGOR 8055i Machine No. 47615 Year of manufacture 2020 Cutting width 80-600 mm Oxygen cutting up to 50 mm steel Maximum passage height 120 mm Track length 6 mm Oxygen torch cutting speed 200 to 750 mm/min. Drilling capacity Ø 8 to Ø 40 mm Drill spindle mount MK4 Spindle speed (Stindel 1) 150 + 300 rpm Spindle speed (Stindel 2) 210 + 420 rpm Spindle speed (Stindel 3) 285 + 570 rpm Number of drilling spindles: 3 Ijlhccqjwcrcpsmeti Spindle drive power: 9.6 kW Hydraulic motor power: 5.5 kW Power supply: 400 volts, 50 Hz - Flexible with 3 spindles for drilling with HSS coolant hole drills in various diameters - Feed speed per spindle, manually adjustable from 50 to 200 mm min. - Center punching or spot drilling by cyclic marking - Air-oil minimum quantity lubrication (air spray cooling system) with continuous compressed air supply - Two hydraulic material clamps in the drilling unit - Oxyacetylene torch (gas/oxygen) with torch monitoring and automatic ignition - 6-meter infeed roller conveyor (length 640 cm x width 105 cm) - 1.3-meter outfeed roller conveyor (length 130 cm) - Hydraulic unit adjacent (80 x 65 cm x height 1660 cm) - CNC control in the control panel Adjacent - PC monitor and keyboard built into the control panel - Machine operates with software (Windows "Steel Office") - Includes several coolant hole twist drills Transportation for space requirements: Length: 860 cm, Width: 240 cm, Height: 255 cm Space requirements of the base machine: Length: 180 cm, Width: 235 cm, Height: 255 cm Weight of the base machine: approx. 5.5 tons Weight of roller conveyors: approx. 1 ton Very good condition, ready for immediate use Ideal for cutting and drilling flange plates, base plates, and flange rings with holes Also very suitable for drilling stair stringers and other profiles up to 600 mm wide and 120 mm high. First, the flat steel is drilled or center-punched with HSS coolant hole drills, then the workpiece is burnt out.

Condition: good (used), Year of construction: 2002, table width 2000 mm table length 2 x 3000 mm Ielhovwgndsccqmeti burner heads 2 (3) Control Version 5T gangway length 9000 mm sheet thickness max. 100 mm output 2 KVA weight of the machine ca. 3 t Technical details: CNC portal flame cutting machine Manufacturer: ESAB Type: Suprarex SXE-P 3500 Year of manufacture: 2002 CNC control: Vision T5 (installed in 2014) Working area: 2 cutting tables, each L=3m, W=2m Gantry track width: 3.5m Track length: 9 m Max. sheet thickness that can be cut (autogenous): 100 mm 2 oxyfuel torches 1 plasma torch with ESAB ESP 200 power source Extraction/filter system: Kappa Separator KS2/3 flame cutting table + Mykron Fine dust filter

Condition: good (used), 1 used mobile flame cutting system. Make: MÜLLER. Model: Perfecta "Quicky / MESSER GRIESHEIM" - Continuously adjustable speed - Forward/reverse operation - 1 adjustable torch - 230 V connection Ijlhsv N Hhbsccqmjti Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: ready for operation (used), Year of construction: 2012, Functionality: fully functional, machine/vehicle number: 1513, working range: 6,000 mm, type of input current: AC, input voltage: 230 V, working width: 2,000 mm, overall weight: 450 kg, input current: 25 A, MicroStep OxyCut 6001.20 G: - machining area: 6000 x 2000 mm Itslhcju Sqfyocqmji - 1x master torch carriage for oxycutting - filter: Donaldson DFPRO 6 cyclopeel - new PCs since 2024 (Windows 11) Price exworks Wouters Cutting & Welding

Condition: good (used), Year of construction: 2016, CNC Portal flame cutting machine Manufacturer: Sato Type: Satronik D5765 Manufacture: 2016 CNC control: Satocontrol CNC 3010 Track width: 5.750 mm 6 x oxyfuel torche without tracks Iolhccqsgqkc Njmoti without table without filter

Condition: used, Light mark projector for flame cutting machines with drawing scanning -Type: 1.4 -Power: 24 V/100 W -f: 110 mm -Price: per piece -Number: 2x available -Dimensions: 230/93/H125 mm Itolhccjb Uhr Isqmoi -Weight: 0.8 kg

Year of construction: 1965, Condition: used, machine/vehicle number: 2383, for tube-Ø: 250 - 530 mm for material thickness: 3 - 40 mm drive: by hand space requirement: 1000 x 800 x 1200 mm Weight: approx. 70 kg Itjlhccqsb Nv Stemoi

Condition: good (used), Year of construction: 2004, CNC portal flame cutting machine Itslhofny Daoccqmji Manufacturer: Zinser Type: 2115 Year of manufacture: 2004 CNC control: CNC2010 1 oxy-fuel torch Working area: 2.5 x 15 m length can be shortened as desired Track with beam 17 m without table 17725ä