Lamination bandsaw

Primultini 1300 RE

Condition: new, Year of construction: 2025, operating hours: 10 h, Engine: CUMMINS - US EPA Tier 4 final, water-cooled, with electrically heated water separator with 24V fuel pre-filter and air filter pre-cleaner - Diesel particulate filter (DPF) - Eco-switch for diesel engine - Cooling fan with reversing function for cleaning the radiators - Automatic central lubrication for attachment and slewing ring raceway - Pinion-tooth lubrication for slewing ring - Emergency control to ensure machine availability during restricted operation By bypassing the main functions - Joystick steering Undercarriage Mobile undercarriage with 4-point support. All-wheel drive Solid rubber tires 12.00-20 (8-way). Cabin Adjustment Cabin adjustment TYPE 270 for SENNEBOGEN MAXCAB. Hydraulically liftable up to approx. 2.7 m Cabin and Equipment MAXCAB Industrial with sliding door including a one-piece, straight windshield with armored glass. Armored glass cab roof window Cab protective grille at the front and top Automatic climate control Air-suspended comfort driver's seat with climate control, seat heating, and headrest Fully adjustable multifunctional armrests for the driver's seat 2-inch safety belt Rsdpfxewb Dnzs Aa Ejck Radio/USB/MP3 and Bluetooth function Position slewing gear brake Interior sunshade for roof hatch and windshield Uppercarriage options Additional counterweight 0.6 t SENNEBOGEN Hydro Clean filter Safety railing Platform next to the cab with railing (bolted) Railing on the uppercarriage, foldable for transport Work equipment Type K18 transfer equipment consisting of: Compact boom 10.1 m and stick 7.9 m Lift and stick cylinders with end-of-stroke damping Hose rupture protection for lift and stick cylinders Limit switches for lifting/lowering and boom on/off Boom damper reduces sway and dampens abrupt movements. SENNEBOGEN 20 kW, 230 V generator system for diesel machines, 100% duty cycle, maintenance-free Safety circuit against short circuits and overloads, insulation monitoring 4-pole generator, hydraulically driven, can be switched off when not in generator mode without hydraulic power loss, control and display unit in the cab. Basic lighting package: Two H4 recessed headlights in the upper frame at the front left and right, two taillights and two headlights at the front left integrated in the cab roof. LED work light with magnetic attachment and 5 m cable for flexible positioning in the maintenance area. Camera system - Basic package with 2 cameras includes: 1 7" color monitor with 4-way split screen, expandable to a maximum of 4 cameras, 2 color cameras with a 115° field of view for the rear view camera and the right side of the machine. Additional lighting package 1: One spotlight mounted on the uppercarriage One LED work light Additional lighting package 2: Two LED spotlights on a pole Two LED spotlights on the boom One LED spotlight on the counterweight Rotating beacon

Condition: excellent (used), power: 115 kW (156.36 HP), fuel type: diesel, color: green, Year of construction: 2021, operating hours: 4,800 h, General information Year of manufacture: 2021 Field of application: Construction Serial number: 818.0.2803 Technical information Number of cylinders: 4 Empty weight: 19.000 kg Condition Technical condition: very good Visual appearance: very good Financial information Price: On request Other information Emissions class: Stage V Additional information Please contact Ferdinand Pater for more information Stock no. D28 Machine Brand Sennebogen Type: 818ME-series Rcodpfx Aot Dlulja Eok Weight: 19 Ton Serial number: 818.0.2803 Building year: 2021 Worked hours: 4700 Engine: Cummins QSB 4.5 Stage V 115kW at 2200rpm Boom: K9 ULM, 5.3 meter boom, 3.8 meter grab stick with ULM Cabin: Maxcab, Hydraulic Cab Riser, 2,7 m. Upper carriage: Standard Sennebogen color, complete new spray paint, Central greasing system Undercarriage: Mobile, 8 full rubber tires 10,00-20 with 4 outriggers Lights: Several (LED) lights on boom, stick and cabin Extra: Machine is serviced and clean, ready for work

Year of construction: 2024, condition: new, UNIVERSAL FOOD MIXING MACHINE 300L Intended for sauerkraut mixing with carrots, beets, salt, and spices, also for salad, kimchi mixing etc. The drum is rotated by an inverter motor 2.2 kW, with adjustable speed. The machine is solidly constructed and has a massive structure made entirely of stainless steel. Mixing blades are screwed, and Rcedpfx Aou Nx Dlsa Esk it is possible to replace them with a different shape of mixing blades.

Condition: new, power: 14 kW (19.03 HP), fuel type: diesel, Year of construction: 2023, operating hours: 145 h, Drive: Track Serial number: E072 Rcjdpfx Ajxhbr Usa Esk Rental currency: EUR Please contact KEY-TEC Sales for more information

Condition: good (used), Year of construction: 2008, machine/vehicle number: 21100122-F, Offer 25108 Technical Data: - Saw blade dimensions 350 x 3.4 x 32 mm - Saw blade speed 3400 rpm - Cutting range at 90° round 120 mm - or flat 105 x 105 mm - 180 x 70 mm - at 45° round 110 mm Rodpfxswq N Swe Aa Eock - flat 135 x 60 mm - Bevel adjustable left + right 45 ° - Tiltable bevel adjustment of the saw head for ship cuts left - Pneumatic vises - Discharge – roller conveyor with length stop 2000 mm - Feed – roller conveyor 3000 mm - Drive 400 V / 2.2 kW - Space requirement approx. W 600 x H 1730 x D 1200 mm - Weight approx. 180 kg

Condition: used, Tenoning spindle 1 St. Number of milling agregates 5 St. Spindle diameter 50 mm Rsdpfx Aaovu Hghj Eock Control Weinig, PC-Nexus # 2774 Weinig Unicontrol 6 with NC spindles Machine will be cleaned and completely checked before delivery ----- Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3 kW > Radial adjustment path pneumatically controlled to 8 positions, e.g. for edge rounding from above > Laser aiming light for detecting the saw section Item 2: Rounding unit horizontal below ----- > Position: horizontal below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length 25 mm > Spindle speed: 9,000 rpm > Max. tool flight circle: 130 mm > Axial adjustment path mechanically coupled with Crosscut saw > Adjustment path radial pneumatically controlled on/off Length stop NC controlled ----- > Length 3500 mm > Electronic length stop Item 3: Tenon and slot spindle ----- > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless adjustment, NC-controlled > Spindle speed: 3500 rpm > Tool flight circle max. 320 mm > Spindle diameter: 50 mm > Tool diameter max.: 320 mm > Motor power: 11 kW Item 4: 1. Profiling spindle (same and opposite rotation) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 7.5 kW Item 5: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless adjustment, NC-controlled > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers axially pneumatic opposite the spindle controlled, 2 positions Rung guide consisting of: Guide ruler in the stop (area of ??the synchronous spindle), Rung support bar from above in the area of ??the profile milling unit vertically on the right and profiling spindle. Pos. 6: Profile milling unit horizontal top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??9,000 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions > Radial adjustment range 125 mm, 8 positions Pos. 7: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions > Radial adjustment range 110 mm, 8-way turret > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 210 mm > Motor power: 3.0 kW Item 8: Profile milling unit/grooving unit from below ----- > Motor power: 3.0 kW > Tool clamping length: 125 mm > Axial adjustment range 100 mm, 8 positions > Radial adjustment range 1...

Condition: excellent (used), fuel type: diesel, color: yellow, Year of construction: 2022, operating hours: 295 h, Year of manufacture: 2022 Drive: Wheel Unladen weight: 38,500 kg CE marking: Yes Technical condition: Very good Visual condition: Very good Price: On request NEW/DEMO CATERPILLAR MH3040 MATERIAL HANDLER Rsdpouxr Ngjfx Aa Ejck YEAR OF MANUFACTURE 2022 ONLY 295 DEMO HOURS!!! MAXIMUM REACH 15,490 MM MH BOOM 9.3 M (30'6") STICK 7.1 M (23'3") MAX HEIGHT 17,510 MM MAX STOCKPILE HEIGHT 5,445 MM MAX DEPTH 5,265 MM JIB PIN HEIGHT 12,195 MM 4X OUTRIGGERS HEAVY-DUTY AXLES HYDROSTATIC TRANSMISSION CAT C7.1 ENGINE TIRES 16.00-25 HYDRAULIC ELEVATING CAB CAB PROTECTION AUTOMATIC AIR CONDITIONING LCD TOUCHSCREEN MONITOR TEMPERED P5A WINDSHIELD CAMERA CE CERTIFICATE FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Condition: excellent (used), Year of construction: 1994, FOUR-SIDED PLANER WEINIG Type: U 23 B.j 1994 Max working height: 180 mm Max working width: 230 mm Rsdpfxjp R N Eve Aa Ejck 6 spindle

Condition: excellent (used), Year of construction: 2012, Set for finger jointing in medium and mass production. The machine is technically efficient and in good condition. Several sets of tools are included. Characteristic: – industrial set with one tenoning machine. Loading the package under the supervision of the operator enables the processing of inferior raw material, – sensitivity controlled by microprocessors /automatic control/, – turning the package after 1 treatment on the turntable (sharp connection) or turning the package on the back (furniture joint with a line; unique GOMA solution), – the set includes an automatic station for loading the press, – the possibility of using cuts on the press, Tenoner with feed table Data Values Milling spindle fi 50x210 mm Spindle speed 6000 rpm 18.5 kW motor Tool dimensions fi 250x160 mm The saw spindle aligns the face Special chipper fi 300x8 mm 6 kW / 3000 rpm motor Stepless feed table Working width x working height 600 x 30-160 mm Glue nozzle outline by tool PRESS FC-10 PZ6/2 Data Values Board width 30-160 mm Jufefe Rcedpjlu D Tfjfx Aa Ejk Board thickness 20-70 mm The length of the finished board is 6000 mm Pressing force 3 - 7.5 - 10 T Hydraulic power pack 3 kW / 140 bar

Year of construction: 1996, condition: good (used), Weinig Unimat 23 four-side planer - German production - grooved top - year of production 1996 - pulling rollers in the table top TECHNICAL PARAMETERS: planed width 230 mm planing height 160 mm grooved top spindle diameter 40 mm 1 lower spindle 7.5 kW 2 right spindle 7.5 kW Rcjdpfoh Dwl Dex Aa Eek 3 left spindle 7.5 kW 4 upper spindle 11 kW 5 lower spindle 7.5 kW feed smoothly adjustable 6-36 m / min 5.5 kW feed motor power six top steel pulling rollers two upper rubber pulling rollers three pullers in the table top pneumatic feed pressure pneumatic shoe clamp spindles with brakes pre-table length 1970 mm electric height adjustment central lubrication (split) diameter of nozzles 140 mm dimensions of the machine (length / width / height) 410/200/180 cm weight ~ 3000 kg