Used Feed Apparatus for sale (12,012)

Condition: used, Year of construction: 2020, This is a Product Pump with the Balance tank for viscous products ie. yoghurt, pastes, cream, etc. It is designed to transfer the product from A To B without overheating or beating the product. This is located on skid with an extra high speed volume pump for the CIP wash down of the system. Control panel is included in the line. Lsdpfx Abjz Izh Toyehn Product Pump: For viscous Products CIP: Special CIP Pump on the skid Stainless steel: Yes Electricals: 3 phase / 400v /50-60hz Available: Immediately

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, L & Z lathe / WEILER CONDOR AC / Stepless speed control / FROM AN EDUCATIONAL INSTITUTION - CE marking - Year of manufacture: 2000 - Swing over cross slide: 180 mm - Distance between centers: 165 mm - Max. swing: 330 mm - Turning length: approx. 800 mm - Speed (stepless): max. 2800 rpm Ledpfxjz Izi De Abyjhn - Automatic longitudinal / cross feeds - Threading / Metric / Inch etc. - 3-jaw chuck - Tailstock - Chip guard - Machine light - Multifix base and 6 inserts - Various change gears - Coolant system - Various operating tools - Documentation Dimensions: L x W x H: 1.8 x 1 x 1.8 meters / Weight: 1300 kg Errors and omissions excepted.

Condition: ready for operation (used), functionality: fully functional, L & Z Lathe WEILER Matador -Center height 140mm -Distance between centers 500mm -Speed range (continuously variable speed adjustment) 25-3000 RPM -Spindle bore approx. 36mm -Automatic longitudinal and cross feeds -Thread cutting / Metric / Inch, etc. -Tailstock / Morse taper MK3 -Electric chuck guard -Multifix with insert -Three-jaw chuck with interchangeable jaws -Machine feet -Change gears -Drill chuck & rotating center Lhodpfjz Nltdsx Abyjn -Documentation Dimensions: L x W x H 1.5 x 0.6 x 1.2 meters / Weight approx. 600 kg Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, L & Z spindle lathe / WEILER CONDOR B / incl. Heidenhain 3-axis digital control - Machine from an educational institution / in perfect condition - Three-axis Heidenhain digital control - Center height 165 mm - Swing over bed 330 mm Lodsz St Iuepfx Abyehn - Swing over cross slide 185 mm - Turning length approx. 800 mm - Spindle speeds (geared) 22 - 2800 rpm - Thread cutting / Metric / Inch, etc. - Bar capacity 40 mm - Tailstock / Morse taper MK 3 - Electric chuck guard - Multifix base holder with inserts - Three-jaw chuck Forkardt - Machine lamp - Chip guard - Bed stop - Machine feet - Documentation Dimensions: L x W x H 1.8 x 0.8 x 1.6 meters / Weight 1100 kg Errors and omissions excepted.

Condition: used, machine/vehicle number: 3045, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Manufacturer: Matra Model: MD40 Machine Type: Turning and threading lathe Machine Weight: approx. 4.8 t Working Area Turning diameter over bed: 870 mm Turning diameter over carriage: 520 mm Turning length: 2,100 mm Turning diameter in the pit: 1,080 mm Pit length: 430 mm Spindle Lodpfxe Aa Az Ss Abyehn Speed stages: 24 Speed range: 8–1,000 rpm Spindle bore: 103 mm Slides and Travels X-axis: 1,830 mm X²-axis: 160 mm Y-axis: 415 mm Compound slide travel: 450 mm Top slide travel: 160 mm Feeds Longitudinal feed stages: 104 Longitudinal feed: 0.1–61.6 mm/rev Longitudinal feed: 0.0038–2 19/64 in/rev Cross feed stages: 104 Cross slide feed: 0.3–18.4 mm/rev Cross feed: 0.0012–47/64 in/rev Rapid traverse longitudinal: 5,140 mm/min Rapid traverse cross: 2,570 mm/min Thread Cutting Thread pitches: 72 Metric thread pitch: 0.5–240 mm Inch threads: 60–1/8 threads/inch Module threads: 0.125–60 mm Tailstock Tailstock cross-travel from center: 10 mm Arbor shank: MK 6 Arbor travel: 280 mm Electrical Data Frequency: 50 Hz Operating voltage: 380 V Control voltage: 220 V Rated current: 30 A Fuse rating: 50 A Total power consumption: 13 kW Dimensions Space requirement: approx. 4.1 × 1.5 × 1.9 m EQUIPMENT Original Forkardt F400 3-jaw chuck Removable bridge Original MiniWizard 2-axis digital display 3 glass scales Multifix quick-change tool system Swiveling spindle guard with safety switch 2 safety emergency stop buttons Lockable main switch

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, L&Z Lathe KMUTH BASIC Plus incl. 3-axis digital display - Year of manufacture 2011 - CE marking - Three-axis digital display - Center height 150mm - Max. turning diameter 300mm - Max. turning diameter over support 178mm - Max. turning diameter without bridge 430mm - Center distance 810mm - Spindle bore 38mm - Spindle speeds (geared) 60 - 1550 rpm (9 steps) - Automatic longitudinal / facing feeds - Spindle mount - Camlock D1 - 4" - Tailstock taper MK 3 - Quill travel 100mm - Bed width 180mm - Multifix base with insert - Electric chuck guard - Work light - Coaxial center - 3-jaw chuck - 2 x steady rests - Documentation Dimensions: L x W x H 1.6 x 0.7 x 1.6 meters / Weight 550 kg Lsdpfx Absz Hwx Ejyjhn Errors and omissions excepted.

Condition: ready for operation (used), functionality: fully functional, Weiler Matador lead and draw spindle lathe -Distance between centers: 500 mm -Swing over bed: 140 mm -Automatic longitudinal/cross feeds -Thread cutting / metric, inch, etc. -Spindle bore approx. 36 mm -Spindle head: Size 5 -Speed range: (geared) 15–3,550 rpm -Brake motor -Coolant pump -Chuck guard -Forkardt F 160 collet chuck -Quick-change tool holder Multifix & insert Lhjdpsztbbtsfx Abyjn -Drill chuck -Follower rest -Documentation Dimensions: L x W x H 1.5 x 0.6 x 1.2 meters / Weight 600 kg Errors and omissions excepted

Condition: used, Year of construction: 1972, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Manufacturer: PBR Type: TM 450/2000 Machine Type: Precision draw and feed spindle lathe Machine Weight: approx. 7.9 t Working Area Turning diameter over bed: 980 mm Turning diameter over carriage: 600 mm Turning length: 2,200 mm Turning diameter in the pit: 1,200 mm Pit length: 450 mm Spindle Spindle bore: 150 mm Speed stages: 24 Speed range: 8–800 rpm Axes and Travels X-axis: 2,000 mm X²-axis: 350 mm Y-axis: 500 mm Feeds Feed stages: 108 Longitudinal feed: 0.032–15.2 mm/rev Cross feed: 0.016–7.6 mm/rev Thread Cutting Number of thread pitches: 398 Metric thread pitch: 0.5–224 mm Metric thread pitch: 0.25–112 mm Imperial thread pitch: 56–1/8 TPI Diametral Pitch: 112–1/4 D.P. Tailstock Arbor support: MK 6 Arbor travel: 380 mm Electrical Data Voltage: 380 V Frequency: 50 Hz Total power requirement: 25 hp Dimensions Footprint: approx. 4.4 × 1.8 × 1.7 m EQUIPMENT Original Forkardt 3-jaw chuck, 500 mm Hardened and ground bed guides Rapid traverse for longitudinal and cross feeds Spindle brake Original Sauter hydraulics with external oil supply Original Ideal tool holder Faceplate with 4 independent jaws Coolant system Magnetic clutch Automatic longitudinal stops Cross stop Thread dial Reducing sleeve 2 fixed centers Lhodpfe Aa Azlox Abysn Fixed steady rest Swiveling Staudacher spindle guard with safety switch 2 emergency stop buttons Main switch Chip collector Workpiece lighting Machine-mounted control cabinet

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, overall weight: 3,000 kg, COMPLETE FEEDING LINE 3v1 UNCOILER + STRAIGHTENER + FEEDER Type CR-AP 400 Year 2013 width = 400 mm Lsdpfxoz S T Sge Abyehn thickness minimal 0,5 mm thickness max = 3,0 mm 9+2 straightener rollers UNCOILER: model SM15 Year 2013, motorized, hydraulic expansion pressure arm coil width 400 mm Decoiler capacity 1500 kg The feeding straightener straightens the material and feeds it into the press. The "CR AP" series features an opening head for easier roller cleaning and pilot release. This type of machine is suitable for working with medium-thickness strips.

Condition: used, total length: 11,500 mm, total width: 2,450 mm, total height: 2,600 mm, Colour: Green Empty weight: 16.500 kg Veneer press Feed-through press HOT Colombo Machine dimensions: 4400x1400 Oil heated Lodpfx Aswnhvvebyjhn input/output is included 8 cylinders Complete with glue roller etc. - Documentation available: No - CE certificate present: No - Press drive: Hydraulic - Max. workpiece length [mm]: 4500 - Max. workpiece width [mm]: 1400 - Max. workpiece height [mm]: 140 - Total stroke [mm]: 140 - Number of stages [pcs]: 1 - Material of press plates: Steel - Number of cylinders [pcs]: 8 - Cylinder diameter [mm]: 85 - Working pressure [kg/cm²]: 4 - Heating type: Oil heated - Voltage [V]: 400 - Transport dimensions: 11500mm x 2450mm x 2600mm (l x w x h) - Transport weight [kg]: 16500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1979, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Working area Swinging diameter over bed: 480 mm Swinging diameter over cross slide: 200 mm Turning length: 650 mm Maximum turning diameter over bed cover: 200 mm Distance between centers: 750 mm Spindle Spindle head: Size 6 Spindle bore: 58 mm Control CNC path control: 2 axes Control system: Siemens SINUMERIK 5T Threading: available Lodpfx Abj Aa Nausyshn Motor control cabinet: Siemens 810T Tailstock Taper in tailstock quill: MK 4 Tailstock quill travel: max. 200 mm Tailstock travel: 550 mm Performance data Total power requirement: 18 kW Machine weight: approx. 2.7 t Machine dimensions Space requirement: approx. 2.70 × 1.58 × 1.68 m Control cabinet Control cabinet dimensions: 800 × 400 × 2,300 mm Control cabinet weight: 150 kg Motor control cabinet dimensions: 800 × 900 × 1,000 mm Motor control cabinet weight: 200 kg EQUIPMENT 4 chucks Spax screws Sheet metal screwdriver Drill Drill bits

Condition: ready for operation (used), Year of construction: 2010, operating hours: 20,000 h, functionality: fully functional, overall weight: 15,000 kg, rotor diameter: 500 mm, rotational speed (max.): 200 rpm, power: 90 kW (122.37 HP), input voltage: 400 V, type of input current: three-phase, The MeWa Universal Granulator UG 1000 is a high-performance, stationary single-shaft secondary shredder, specifically designed for the fine shredding and recycling of various composite materials and waste. The machine operates according to the principle of a guillotine shear, in which the material is cut between rotating and stationary blades. Lhjdpjz Antujfx Abyen Drive power: 90 kW Cutting chamber / working width: 1,000 mm Number of blades (rotor / stator): 25/5 blades Rotor diameter (circle of rotation): 500 mm Total weight: approx. 15 tons Screen size: Flexible, interchangeable screens under the rotor determine the final particle size (typically between 10 mm and 80 mm).

Condition: not inspected (used), machine/vehicle number: 42893, Lead screw and feed spindle lathe, manufacturer: ZMM/Bulgaria, type: L400 TS, serial number: 42893, year of manufacture: unknown, turning length: 1,000 mm, up to 2,180 rpm, 3-axis digital display, manufacturer: Facor, Multifix steel tool holder, coolant system, tailstock, light, splash guard, 3 steady rests, 4-jaw chuck, accessories. Lsdpfxez R Nalo Abyshn

Condition: ready for operation (used), functionality: fully functional, WEISSER HEILBRONN Junior / L & Z lathe with Heidenhain digital control -Center height 220mm -Turning diameter over bed 440mm -Distance between centers 1000mm -Spindle bore approx. 50mm -Spindle speeds 40 - 2000 rpm -Automatic longitudinal / facing feeds -Threading / Metric / Inch, etc. -Heidenhain digital display ND 780 -Forkardt F250 3-jaw chuck -Multifix base and inserts -Electric chuck guard -Follow rest -L & Z spindle cover -Work light -Documentation Dimensions: L x W x H 2.6 x 1.3 x 1.8 meters / Weight approx. 1800 kg Errors and omissions excepted. Lhjdpfx Aezwggvjbyon

Condition: good (used), Year of construction: 2018, functionality: fully functional, Equipment: CE marking, scorer, Horizontal panel dividing saw / Horizontal panel saw with lifting table feed Manufacturer: SCM / Gabbiani Type: Gabbiani ST 115 Year of manufacture: 2018 Lhjdpfjzyx Evsx Abyjn Horizontal beam saw with lifting table feed from the rear, originating from a parquet factory. Cutting length approx. 3200 mm Cutting depth on the lifting table approx. 1850 mm Max. stack height on the lifting table (with supports) approx. 600 mm Saw blade projection 115 mm Variable saw carriage speed 0 - 135 m/min. Variable sliding table speed 0 - 70 m/min. Motor of the main saw blade approx. 9 kW Main saw blade speed 3900 rpm Saw blade diameter 400 mm Motor of the scoring saw approx. 1.8 kW Scoring saw speed 6300 rpm Scoring saw blade diameter 160 mm 6 clamping devices (3 of which with front aligner) 2 air cushion tables, each with blower Voltage: 400 V, 3 phases, 50 Hz, 43 A Weight approx. 5500 kg Data partially estimated and taken from the brochure.

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, L & Z Lathe WEILER CONDOR B incl. three-axis digital display -CE marking -Machine from an educational institution / very well maintained -Center height 165mm -Swinging diameter over bed 330mm -Swinging diameter over cross slide 185mm -Turning length 800mm -Spindle speeds 22 - 2800 rpm -Automatic / longitudinal and cross feeds -Threading / metric / inch, etc. -Bar capacity 40mm -Tailstock / Morse taper MT3 -Multifix base and inserts -Three-jaw chuck 200mm -Electric chuck guard -Spindle cover -2x Emergency stop Lhsdpfx Aezvx A Tebyjn -Coolant system -Chip guard -Documentation Dimensions: L x W x H 1.8 x 0.8 x 1.6 meters / Weight 1200 kg Errors and omissions excepted.

Condition: used, Year of construction: 1989, 3 St. 110 mm Weight 30 kg Used Machine Year of Manufacture: 1989 Features and Technical Specifications: - Type 76 feed unit for table saws and panel saws of various makes - For safe cutting of solid wood strips, planks, window stiles, etc. - With adjustable mounting profile, 3 feed rollers, and 2 fixed speeds - Quick adjustment to workpiece height via a handwheel - With dust extraction connection for dust-free operation, including plug - With rail for mounting heights from 18 to 40 mm - Quick and easy (tool-free) installation and removal - Transparent, swing-away guard for optimal visibility and ergonomic operation when cutting moldings - Supply voltage: 400 V / 50 Hz Lhsdozr Rqzjpfx Abyen - Weight: approx. 30 kg

Condition: used, Board feeding system Jacksteel Year of construction: 2018 JackSteel board feeding system for transporting boards/blocks out of the saw, separating the blocks one by one and then feeding them into the centre for re-sawing. Below the line is a chain conveyor for the collection of chips and waste. The line operates at speeds of up to 90 m/min. Ljdpfxsz Syife Abyjhn

Condition: ready for operation (used), WEILER Matador VS 2, including a new three-axis digital display, from a school workshop. -Maximum distance between centers: 140 mm -Distance between centers: 500 mm -Spindle speeds: 15 - 3550 rpm -Automatic longitudinal and cross feeds -Threading capabilities: metric, inch, etc. -New three-axis digital display -Electric chuck guard -Work light Lhedpfozr Rnyex Abysn -Multifix base with inserts -Coolant system -Three-jaw chuck / collet chuck -Tailstock MK 3 -Various tools -Documentation Dimensions: L x W x H: 1.5 x 0.6 x 1.5 meters / Weight: 680 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 2000, pressing force: 80 t, bale width: 1,100 mm, bale height: 720 mm, noise level: 85 dB, oil tank capacity: 900 l, empty load weight: 24,000 kg, operating pressure: 250 bar, For sale: a Bollegraaf 80A baling press from the year 2000, including a feed conveyor. The machine is in working condition and is still in use. The machine can be inspected by appointment. The machine is equipped with a pre-compression flap, cross-tying with horizontal wires, and is powered by a 45 kW main pump. The feed conveyor has a working width of 1500 mm. Lhodpfxsz Sza Ee Abyen

Condition: good (used), Year of construction: 1978, functionality: fully functional, For sale is a robust Hofmann table milling machine, built in 1978, in a heavy-duty industrial design. The machine is equipped with a Holz-Her 3-roller feed unit ETZ and is suitable for a variety of milling operations in carpentry workshops, joineries, and in the furniture and interior design industries. The height adjustment of the milling spindle is conveniently done via a handwheel. The milling jaws can be adjusted manually. Three different spindle speeds allow for adaptation to various milling operations. In addition, the machine is equipped with 3 Aigner rails. Technical data Manufacturer: Hofmann Year of construction: 1978 Lhedpezvdk Aefx Abyen Milling spindle diameter: 30 mm Spindle speeds: 6,000 / 8,000 / 10,000 rpm Height adjustment: by means of a handwheel Milling jaw adjustment: manual Dust extraction connections: Ø 120 / 140 mm Machine size: approx. 2,700 x 1,100 mm Heavy-duty table and machine construction made of cast iron Equipment Holz-Her 3-roller feed unit ETZ 3 feed rollers Height-adjustable feed unit Manual milling fence 3 Aigner rails Milling spindle Ø 30 mm 3 spindle speeds Handwheel for height adjustment Dust extraction connections Accessories as shown in the photos Scope of supply Hofmann table milling machine Holz-Her 3-roller feed unit ETZ 3 Aigner rails Accessories as shown in the photos The machine can be inspected and tested under power by appointment. Transport possible for an extra charge! The machine is subject to differential taxation according to § 25a UStG. The machine will be inspected before sale. For used machines with a year of construction of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: ready for operation (used), Year of construction: 2012, L & Z Spindle Lathe ZMM - CU 630 RD incl. Digital Display -CE marking -Digital display Lhjdpfx Ajzhx Hvsbyon -Year of manufacture 2012 -Center height 315mm -Turning diameter over guides 630mm -Turning diameter over cross slide 430mm -Distance between centers 1500mm -Turning diameter with bridge removed 830mm -Spindle bore 103mm -Automatic longitudinal / facing feeds -Motorized rapid traverse in the carriage -Speed range 16 - 1250 RPM (stepless speed control) -Drive power 11Kw -Three-jaw chuck / ROTAX 315 incl. hard & soft jaws -Chuck guard -Tailstock -Steady rest -Multifix base with inserts -Coolant system -Work light Dimensions: L x W x H 3.5 x 1.5 x 1.7 meters / Weight 4000Kg Errors and omissions excepted.

Condition: used, Year of construction: 1973, Indexing milling cutter with 3-roller feed spindle, 30 mm diameter. Location: Nattheim. Lhsdezd Tg Aopfx Abysn

Condition: used, Year of construction: 2001, functionality: fully functional, Gassner closure feeding system with pneumatic lifting station and blower Lhjdpfsww Hvmsx Abyon Air transport filter system Special price due to warehouse clearance: €3,600 ex works Külsheim.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, type of input current: three-phase, Zhejiang Baina 150 20D 1000Kg/h extruder The extruder is almost new and is available immediately with a few operating hours. Manufacturer: Zhejiang Baina Type: E150-01-00 Year of manufacture: 2020 External dimensions (L × W × H): 4200 × 1600 × 1500 mm Lhodpfx Absy Ez Erjysn Side rollers; the driving force is provided by the screw, with active dosing Coordinated operation of the feed roller gear drive and the screw drive, with automatic lubrication system Screw material: 38GrMoAcA Screw hardness: HRC 65–68 Steel bushing hardness: HRC 65–70 Nitriding depth: 0.4–0.7 mm Screw design: Design with suction groove for vacuum suction Pressure control, pressure protection value adjustable between 0–35 MPa; with temperature sensor. Screw diameter: 150 mm Screw speed: 1–50 rpm Maximum output: Approx. 1000 kg/h Number of heating stages / output: 7 × 6 kW Cooling stage: 1 stage (side rollers) Vacuum pump output: 2.2 kW Temperature control Automatic heating and cooling control with electromagnetic valve Circulation pump: Weile Cooling water pressure: 0.15–2 kg/cm² Temperature control accuracy: ±1 °C Screw and gear connection: Involute gear connection Motor and reducer drive: Belt drive Hardened gear type: ZLYJ420-28-I (involute gear reducer) Motor power: 160 kW Total installed power: 204 kW Speed ​​control: Frequency converter control