Condition: reconditioned (used), Year of construction: 1996, operating hours: 28,135 h, Functionality: fully functional, pressing force: 60 t, total width: 1,240 mm, total length: 4,465 mm, total height: 2,750 mm, input voltage: 400 V, transport height: 2,750 mm, overall weight: 7,500 kg, year of last overhaul: 2024, filling opening width: 490 mm, filling opening length: 815 mm, How do you do? Cjb Hjuam R Esa Ew Dorb We are offering you a packaging press (can press) from the manufacturer Sandersleben Maschinen- und Anlagenbau GmbH, type SMA-2500/1, with 60 t pressing force, 31 kW connected load, built in 1996. The machine has only run for 28,135 operating hours. With a compaction capacity of approx. 790 kg/m³ (depending on the material), the press is particularly suitable for compacting used disposable packaging (cans) made of ferrous and non-ferrous metals such as aluminum as well as punching waste made of steel or aluminum sheet. The package dimensions are 600 x 300 mm, the length is variable from approx. 50 to 235 mm depending on the material. The press has been overhauled. The following work was carried out: - Machine completely dismantled, cleaned, derusted, primed and repainted - Complete overhaul of the main hydraulic cylinder, new cylinder tube, new cylinder head, new gasket set. - Overhaul of the two cylinders from the counter pressure plate, gasket sets renewed - Knife set planned and ground - Residual emptying and cleaning of the hydraulic oil tank, new HPL 46 hydraulic oil filled and oil filter replaced - General maintenance work - Machine test We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: used, Year of construction: 2006, Bale size 400x400 mm Force 1 Step 850 KN Force 2 Step 850 KN Force 3 Step 850 KN Steel < 8 to/h Aluminium < 4 kg/h Cob Hajltinwj Ew Dorb Driving Power 50 KW Arrangement Surface 7,5 x 7,2 m x m Machine weight 29 to Press box aperture1,9 x 0,95 mxm Place: Germany Available immediately

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, pressing force: 15 t, bale weight: 220 kg, bale height: 700 mm, bale width: 700 mm, input voltage: 400 V, power: 4 kW (5.44 HP), net weight: 2,700 kg, Manufacturer: Borg Baling Company Type: S-15KK Year of production: 2002 3x400V, 4kW, 14.5A Compression force: 15t Creb Ha Eweh Dy Rfj Deb Net weight: 2.7 t Bale max. sizes 700x700x1000 mm weight of a bale: ca 120 – 220kg Wide Range of Used Machinery, Industrial Equipment

Condition: excellent (used), Year of construction: 2018, Two balers, Bramidan X30 - second-hand - : Price (for both together) ex location: 17.500.-€ (net) Please note that one of the two balers has to be repaired - there is a cost estimate of approx. 1.500.-€ (net)! Manufacturer: Bramidan Type: X30 AD Machine number PEY395533 (second number on request) Year of construction: 2018 Pressing force: 30 t Bale size: WxDxH (mm) 1200 x 800 x 1000 FILLING OPENING: WxH (mm) 1090 x 655 BALE WEIGHT: Cardboard (kg) 275-350, plastic film (kg) 325-425 Crjb Haotq Hris Ew Dob Recyclable material types: Cardboard, plastic film, paper, PET bottles, aluminum cans, tin cans, hard plastic, textiles, styrofoam. 3 x 230 - 400V, 50Hz, Amp: 25/16 db: 59-60 Weight: 1.650kg Condition: good - very good Available: immediately Location: 21465 Reinbek

Condition: like new (used), Year of construction: 2018, Functionality: fully functional, pressing force: 10 t, Fully equipped and ready to use. New oil. Cjb Hov Tfhnsa Ew Dsrb

Condition: used, Revolving briquetting press RUF type RBK 55/2500/120 S Hydraulic pellet press or briquetting press for grinding sludge, metal chips, or similar No. 70002 Year of construction 2009 Briquette diameter 120 mm Briquette length in the pre-compactor approx. 120 mm Pressing force in the pre-compactor 30 tons at 260 bar Briquette length in the main compactor approx. 80 mm Pressing force of the main press cylinder 250 tons at 260 bar Stroke size of the main press cylinder 120 mm Pressing force of the counter-press cylinder 250 tons at 260 bar Stroke size of the counterpress cylinder 15 mm Piston diameter of the main press cylinder 350 mm Press stroke Cycle time approx. 30 sec. for grinding sludge with low residual oil content Hopper size of the screw conveyor 1000 x 600 mm Hydraulic motor power 37 kW Mains connection 400 Volt, 50 Hz, 45 kW - Revolver with 5 stations for high material throughput - Pre-compressor stage for pressing material into the turret disk - 2 opposing main press cylinders with 120 mm and 15 mm stroke - Ejection cylinder for ejecting the finished briquettes from the turret disk - Infinitely variable adjustment of the hydraulic speed for each pressing stage - was used for grinding sludge from metal processing Csb Hashg Uz Is Ew Djrb - Material hopper as hopper with screw conveyor - the machine was completely overhauled at RUF in 2018 - a new SIEMENS Simatic touch panel was installed in 2020 - only a few operating hours after the overhaul very good condition Grinding sludge recycling - great savings through cooling lubricant recovery - Large savings in disposal costs due to the reduction in volume and weight of the grinding sludge - Grinding sludge briquettes with a low residual oil content can possibly be classified as "non-hazardous waste".

Condition: reconditioned (used), Year of construction: 2013, operating hours: 18,819 h, Functionality: fully functional, pressing force: 60 t, bale weight: 400 kg, filling opening width: 1,085 mm, filling opening length: 2,815 mm, bale length: 1,200 mm, total width: 3,140 mm, total height: 2,900 mm, total length: 8,840 mm, bale height: 800 mm, bale width: 100 mm, overall weight: 7,380 kg, transport height: 2,900 mm, power: 9 kW (12.24 HP), year of last overhaul: 2023, transport width: 2,400 mm, transport length: 5,650 mm, Good day, We hereby offer you a used baler from the manufacturer Strautmann, type BaleTainer. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer Strautmann Type BaleTainer Year of construction 2013 Operating hours 18,819 hours Number of bales pressed 7,019 pieces Pressing force main press 60 tonnes Drive power 9.2 kW Machine weight press 7.38 tonnes The baler was partially overhauled. The piston rods and seal sets of the two main hydraulic cylinders were replaced and general maintenance work such as oil and filter changes etc. was carried out. Finally, after the overhaul work, the machine was tested. The press is equipped with a hydraulic tilting device for loading in order to empty lattice box containers on a truck ramp. For example, the machine can be positioned with the tilting device on a truck ramp. There, the employees can roll the material to the tipping device with a mesh trolley and then have it tipped hydraulically into the baler. The machine can also be loaded from the side via the large feed/storage container using a forklift truck or wheel loader. Conveyor belt loading would certainly also be feasible. Crsb Hast H Rgfj Ew Deb The machine documentation is available in German. A viewing is possible by appointment in our workshop. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: used, Year of construction: 2015, Functionality: fully functional, Manufacturer: ATM Type: ArnoBrik 12 Year of construction: 2015 Briquette diameter: 125 mm Press cylinder force: 4,200 KN Capacity: Steel, cast iron: 2600-2900 kg/h Aluminum: 1000-1200 Kg/h Brass: 3200 kg/h Drive power: 3 x 37 kW Installation area: 9 x 6.5 x 2.5 m Cebjq D Acpo Ha Ew Dsrb Machine weight: 24 tons

Condition: excellent (used), Year of construction: 1996, pressing force: 30 t, input voltage: 380 V, bale weight: 600 kg, type of input current: AC, overall weight: 3,000 kg, Manufacture: Philadelphia Tramrail Model: HT30036 Vintage: 1996 400V/45A, 3 phases, 15kW 180 bar system pressure 206 bar maximum system pressure Made of heavy-duty structural steel Cjb Hjm Amk Nsa Ew Dorb Average cycle time of 53 seconds Dimensions: 1980 x 1050 x 3860mm Advance height: 1400mm Baling chamber: 1600 x 760

Condition: excellent (used), Year of construction: 2006, operating hours: 2,632 h, Functionality: fully functional, machine/vehicle number: 29.381, pressing force: 35 t, filling opening width: 62 mm, filling opening length: 100 mm, incl. feed belt Csb Hsvaw T Aoa Ew Djrb

Condition: reconditioned (used), Functionality: fully functional, We offer numerous used and tested spare parts for Dixi presses 60 and 80 SLD and SLS. Photos are only examples. Cjbovfnfmo Ha Ew Dsrb

Condition: excellent (used), Year of construction: 2022, Functionality: fully functional, power: 335 kW (455.47 HP), input voltage: 400 V, net weight: 21,500 kg, 2-shaft crusher with electro-hydraulic drive Shaft length: 2,260 mm Cobst Twa Es Ha Ew Djrb Diameter: 660 mm Torque: 90,000 Nm (max.)

Condition: good (used), Year of construction: 2011, operating hours: 20,580 h, Functionality: fully functional, pressing force: 48 t, bale weight: 450 kg, filling opening width: 1,020 mm, filling opening length: 1,250 mm, bale length: 1,200 mm, bale height: 750 mm, bale width: 1,100 mm, overall weight: 12,000 kg, transport height: 2,750 mm, oil tank capacity: 300 l, power: 30 kW (40.79 HP), transport width: 2,300 mm, transport length: 8,500 mm, type of motor: three-phase motor, nominal current: 59 A, tank capacity: 300 l, Good day, We hereby offer you a used baler from the manufacturer HSM, type VK 4812. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer HSM Type VK 4812 Year of manufacture 2011 Operating hours 20,580 hours Main press force 48 tonnes Drive power 30 kW Crsb Ha Ejt H Rcaew Dsb Machine weight press 12 tonnes The machine documentation is available in German. A viewing is possible by appointment in our workshop. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: used, Year of construction: 1999, operating hours: 14,788 h, Functionality: fully functional, Briquette diameter: 105mm Force Main cylinder: 2900 KN Crjb Ha Ewslhqdme Dob Steel, Cast iron: 1600 kg/h Aluminium: 700 kg/h Brass: 7 kg/h Driving Power 60 kW Arrangement Surface: 6x2,5 mxm Machine weight 9 to Place: Austria Available immediately

Condition: good (used), Year of construction: 1985, Functionality: fully functional, pressing force: 50 t, bale weight: 500 kg, bale length: 1,000 mm, bale height: 750,750,750 mm, bale width: 750 mm, input voltage: 400 V, overall weight: 7,500 kg, oil tank capacity: 500 l, power: 30 kW (40.79 HP), net weight: 7,500 kg, input frequency: 50 Hz, Manufacturer: Paal Typ: Pacomat V Year of construction: 1985 Press power main press: 50 t Specific press capacity: 5 kg/cm² Feed channel: 1.000 x 720mm (l x w) Theoretic throughput rate: 200 cbm/h Bale size: 700 x 1.000 mm (w x h) length adjustable Driving motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8t Crob Ha Ewsic Rl Do Dsb The hydraulic unit is functional, the drive motor is in the removed state.

Condition: as good as new (ex-display), Year of construction: 2023, at a special price of €14,995 net Consists of press and extraction 1) Briquetting press: Your advantages: + very robust, simple technology + top price-performance ratio + suitable for continuous operation + long-standing, well-functioning / established machine Including control cabinet with timer operation The press is switched on manually and then runs until the set time on the timer (e.g. 4 hours) has elapsed. Then the press switches off. Technical data: Briquette dimensions: approx. 35 x 35 mm (square), Briquette length: 5-40 mm *depending on material Throughput up to 20 kg / h *depending on material Dimensions of the machine approx.: 137 x 75 x 210 cm (length x width x height), Weight of the machine: approx. 350 kg, Silo capacity: approx. 250 liters, Motor: 2.2 kW, 400 V - 50 Hz, Noise emission: 62 dB, Raw material requirements: -Wood chips and dust less than 15 mm in length -Moisture content less than 18% ATRO -Sand, stones, metals and minerals increase wear --- Options at extra cost: * Level sensor for automatic operation + € 995 net Press starts and then stops automatically ----- 2) Extraction: Motor: 2.2 kW Volume: 1400 m³/h Noise level: 87 dB (A) Weight: 160 kg. with 2 extraction connections - 100 mm each Filter unit: The filter chamber contains class L or M filters, which, thanks to a large surface and high filtration efficiency (3 micrometers), ensure a high dust retention capacity and air purity at the outlet. *Accessories and hoses on request *Larger or smaller extraction devices on request (0.75/1.5/2.2/3.0 kW) *Atex version optionally available Surcharge + €980 net Crjb Hasg Uwhte Ew Dsb

Condition: used, Year of construction: 2006, power: 11 kW (14.96 HP), WE SELL A PRESSING STATION WITH CUTTING UNIT AND 1 PIECE CAPACITY, WHICH IS SUITABLE FOR PRESSING SECONDARY RAW MATERIALS! Cjbev Tm Dke Ha Ew Dorb MANUFACTURER - PRESTO GmbH (Germany) type: SPN15 year of production - 2006 CAPACITY - 30M3 power - 11 kW PRICE ON REQUEST!

Condition: used, Year of construction: 2011, machine/vehicle number: 340000674, The HSM V-Press 403 baler is a compact solution for the efficient compaction of waste and recycling materials. This used baler offers excellent performance and is ideal for companies looking to optimize their waste management and save space. With its robust design and user-friendly operation, it is perfect for use in various industries. Technical details: Machine no. 6113.114 Serial number 340000674 Pressing force: 33 kN Crob Hjunzn Nsa Ew Djb Power supply: 400 V / 50 Hz Dimensions: approx. 1,200 x 800 x 1,500 mm (L x W x H) Output: 1.1 kW Rated current: 2.6 AMP Year of construction: 2011 Weight: approx. 300 kg

Condition: used, Baler Options Press for cartons and similar, CE marked. Ceb Ha Ewotvb Nce Dsrb Internal useful measures: cm. 110 x 50

Condition: reconditioned (used), Year of construction: 2012, Functionality: fully functional, machine/vehicle number: PVM 324212-1, pressing force: 20 t, bale weight: 250 kg, filling opening width: 1,200 mm, filling opening length: 480 mm, bale length: 1,200 mm, total width: 1,030 mm, total height: 2,790 mm, total length: 1,775 mm, bale height: 1,200 mm, bale width: 800 mm, input voltage: 400 V, overall weight: 1,250 kg, warranty duration: 6 months, input current: 16 A, noise level: 64 dB, power: 4 kW (5.44 HP), type of motor: electric motor, BRAMIDAN vertical baler B 20 suitable for pressing cardboard and foil - very well preserved, overhauled in the workshop, new hydraulic hoses. UVV test according to DGUV rule 214-017 when delivered new. Cjb Hajvm U Rls Ew Djrb Price ex works Stutensee, own collection possible, alternatively shipping by freight forwarder in the cost statement

Condition: good (used), Year of construction: 2004, Ideal for compacting cardboard boxes, films, fruit crates or residual waste. Manufacturer: Husmann Type: HSP Power: 400V, 11kW Croboudkn Aj Ha Ew Dob Year of manufacture: 2004

Condition: reconditioned (used), Used machine in very good condition with only 961 operating hours! Year of construction: 06/2017 bought as seen Crsb Ha Eju Tkw New Djb High pressing pressure: Special max. pressing pressure: 1700 kg/cm2, Throughput capacity up to approx. 300-500 kg per hour *dependent on material, exact statement after test with your material. Main motor: 15 kW, screw motor: 1.5 kW Oil cooler: 0.75 kW Agitator: 0.37 kW Weight: approx. 3900 kg Briquette size: 150x60mm. Requirements for the raw material: - Maximum chip length 20 mm - The feed must be free of magnetic metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and / or increased wear may result . The residual moisture in the briquette cannot be determined without a test. If the residual moisture in the briquette is a purchase criterion, the machine must be tested before purchase and the residual moisture determined by a waste disposal company.

Condition: used, Year of construction: 2016, power: 7 kW (9.52 HP), For sale Pressstation STV1000 with container 30 m3! Technical data pressing station: Pressing station - STV1000 Year of construction - 2016 Dimensions (length x height x width): 3360 x 1165 x 1561mm Pressing force: 300 kN Filling opening: 1180 x 1405 mm Power: 7.5 kW; CONTAINER: capacitat/volume - 30 m3 Crjb Hasv Tm Ato Ew Djb Year of construction - 2016 PRICE ON REQUEST!

Condition: as good as new (ex-display), Year of construction: 2023, Machine for sale at a special price Another machine, available immediately (ex works Neckartailfingen) Demonstration machine with approx. 10 operating hours Your advantages: + Very robust, simple technology + Top price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning / established machine Including control cabinet with timer operation Press is switched on manually and then runs until the time set on the timer (e.g. 4 hours) has elapsed. Then the press switches off. Technical data: Briquette dimensions: approx. 35 x 35 mm (square), Briquette length: 5-40 mm *depending on material Throughput capacity up to 25 kg / h *depending on material Machine dimensions approx. 137 x 75 x 148 cm (length x width x height), Weight of the machine: approx. 250 kg, Capacity of the silo: approx. 250 liters, Motor: 2.2 kW, 400 V - 50 Hz, Noise emission: 62 dB, Raw material requirements: Crsbjfci D Ao Ha Ew Deb -Wood chips and dust smaller than 15 mm in length -Moisture content less than 18 % ATRO -Sand, stones, metals and minerals increase wear --- Options at extra charge: -Timer function + 490 € net Machine is started manually and switches off automatically after a set time X. -Level indicator for automatic operation + 1450 € net Press starts and then stops automatically * NEW !!! Also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, C7m2mgj Surcharge + 690 € net (delivery time then approx. 8 weeks) ---

Condition: used, Year of construction: 2006, power: 11 kW (14.96 HP), WE SELL A PRESSING STATION WITH CUTTING UNIT AND 1 PIECE CAPACITY, WHICH IS SUITABLE FOR PRESSING SECONDARY RAW MATERIALS! MANUFACTURER - PRESTO GmbH (Germany) type: SPN15 Creb Haev Tm Agj Ew Dsb year of production - 2006 CAPACITY - 30M3 power - 11 kW PRICE ON REQUEST!