Briquetting press | ArnoBrik 12

ATM Recyclingsystems ArnoBrik 12

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 90088200, total width: 5,000 mm, total height: 2,000 mm, total length: 6,000 mm, briquette diameter: 120 mm, overall weight: 22,000 kg, input voltage: 400 V, pressing force: 300 t, screw conveyor length: 10,000 mm, year of last overhaul: 2024, Equipment: emergency stop, ArnoBrik Briquetting Machine for Metal Materials Technical Data Main Dimensions Length x Width x Height: 6,000 mm / 19.6 ft x 5,000 mm / 16.4 ft x 2,000 mm / 6.56 ft Weight: 22 tonnes / 21.6 tons Functional Data Main Cylinder Force: 4,000 kN / 403 tons Cycle Time: 10 sec Throughput per hour: - Aluminium: 1.5 – 1.9 t/h (1.6/1.5 – 1.9/1.86 tons/h) - Steel / Grey Cast Iron: 2.7 – 2.9 t/h Csdoygu Nxepfx Agzspw - Steel Powder: 1.67 – 2.0 t/h (1.7/1.67 – 2.0/1.96 tons/h) - Tyre Wire: 2.3 – 2.8 t/h (2.62 – 2.75 tons/h) Briquette Diameter: 120 – 130 mm (4.7 – 5.1 inch) Briquette Height: 110 – 120 mm (4.3 – 4.7 inch) Briquette Weight (depending on material): 3.0 – 12.0 kg (6.61 – 26.45 lbs) Hydraulic Equipment Number of Pumps: 3 Power Requirement per Pump: 37 kW / 49 HP Working Pressure: 300 bar / 4,351 psi Hydraulic Oil Tank: 2,200 l / 581 US gallons Electrical Equipment Total Power Requirement: 127 kW / 170 HP Drive Power: 3 x 37 kW / 49 HP Control Voltage: 24 V DC Operating Voltage: 400 V, 50 Hz

Condition: ready for operation (used), Year of construction: 2002, Speed: 4500rpm, max. bowl diameter: 300mm/167mm, solids: 2.6kg/dm³, material temperature min./max.: 5°C/100°C, bowl dimensions X/Y: 300mm/1200mm, machine material: stainless steel, operating hours: 62293h. Including spare parts. On-site inspection is possible. Cpodpfxsu Av H Do Agzsw

Condition: ready for operation (used), Year of construction: 1999, IMMEDIATELY AVAILABLE, chamber filter press from Häcker with base frame and 50 m3/h Abel pump, plate format 1200 x 1200 mm, approx. 90 PP plates, 30 mm cake, content approx. 2700 liters, automatic. Plate transport, open outlet in filtrate trough on both sides, press is ready for use immediately after assembly, Abel pump was serviced by the manufacturer shortly before it was taken out of service, galvanized base frame with staircase, location is near Würzburg / Germany Cpedpfjrunu Isx Agzjw

Condition: like new (used), functionality: fully functional, Year of construction: 2021, Essentially consisting of: Cpodpfxoq Tcmve Agzsw Feed hopper (20 and 95 cbm), SANDVIK H-2000 cone crusher, double-deck screening plant, various conveyor and stockpile belts, power generator (300 kVA), electrical installation with control cabinet installed in container, storage silo, dust atomization system

Condition: new, Year of construction: 2025, machine/vehicle number: 421159679, Mobile jaw crusher on crawler track VULCANO crusher is the most modern and compact machine of the last generation in the 25 tons category. The feed hopper with roadworthy loading dimensions and the possibility of folding the conveyor belt, which allows transport also on trailers, make it versatile in transports and equally fast in start-up. From the arrival at the site to the moment of the start of the crushing operations, only the time necessary for warming up elapses. Equipped with the latest generation of control and operating systems, it is simple and user-friendly, and also environmentally friendly. Cjdohd I Sbepfx Agzopw The HCS (Hydraulic Crushing System) control system actively supports the automatic operation of the machine, guaranteeing it the highest profitability in terms of maintenance costs and productivity, making it incomparable. The structural reinforcement between the frame and the crusher gives the machine maximum robustness to stresses. The particular design of the supporting structure guarantees excellent access to all parts of the machine during maintenance operations. The GI CRUSHER VULCANO certainly offers convincing and incomparable performances both in operations on natural stone and in recycling, as well as for rentals. Production capacity: approx. 190 TO/H Patented HCS system Proportional distributor with \"Load Sensing \" for an optimization of the system and a reduction fuel consumption by approx. 30%. Pre-screening optional gap size hydraulically adjustable also during crushing operation fast blocking system with wedges and folding cylinders unloading height 2750 mm dust extraction system tank pump magnetic separator warranty 1 year up to max. operating hours from the start of operation of the equipment Technical data: Jaw crusher 830 x 580 mm crushing gap from 30 to 160 mm feed hopper 3,5 m³ - 1800 x 2970 mm grizzly feeder 770 x 2750 mm Main conveyor belt 800 x 8700 mm 4 cylinder constant speed diesel engine 82 HP/60 KW, exhaust stage V Control panel chain drive 400 x 2920 mm Weight: kg Transport length 10850 mm or 9170 mm with folding discharge belt Transport width:2520 mm transport height 3100 mm Further information Purpose: construction, Drive: caterpillar

Condition: good (used), Air cooler, cold storage, refrigerated container, cold room -equipped with: 4x fans -Cooling capacity: 70 kW Cpsdpfx Ageb Nx Hmszjw -Air flow rate: 39,673 m³/h -Area: 348 m² -Slat spacing: 10 mm -Fan diameter: 500 mm -Lamb spacing: 10 mm -Housing: made of stainless steel -Drip tray -Number: 2x coolers available -Price: per piece -Dimensions: 4550/1100/H940 mm -Weight: 600 kg/piece

Condition: used, Year of construction: 2021, Lindner Urraco 95 DK – Year of Manufacture 2021 – Well-Maintained Condition For sale is a Lindner Urraco 95 DK from 2021 with 7,230 recorded operating hours. The shredder is in a well-maintained and ready-to-use condition. The exact condition can be seen in the photos. The machine is equipped with the DK4 package, featuring a reinforced gearbox and a reinforced cutting frame. Cpsdpfx Agsx Nkhqezow — Specification / Scope of Delivery • 1 set of armoured shafts HW 8/10 with clearing combs and breaker bar, suitable for scrap and waste • 1 set of used shafts HW 8/10 with clearing combs and breaker bar, also for scrap and waste • DK4 package with reinforced gearbox and reinforced cutting frame — Technical Data – Lindner Urraco 95 DK Model: Lindner Urraco 95 DK Year of manufacture: 2021 Operating hours: 7,230 Engine power: approx. 566 kW (approx. 770 HP) Emissions standard: Stage V / Tier 4f (depending on version) Shaft length: approx. 2,500 mm Shaft diameter: approx. 870 mm Maximum torque: up to approx. 480,000 Nm Machine weight: approx. 46 t Dimensions (L x W x H): approx. 9.2 m x 2.55 m x 3.2 m Chassis: crawler tracks, hydraulically driven Application areas: scrap, commercial waste, bulky waste, mixed waste, wood, recycling material — Condition: Well-maintained machine Fully operational Sale as inspected on site Additional Information / Maintenance History The machine had a full maintenance and service contract directly with Lindner until recently. All maintenance and service work was carried out professionally in accordance with the manufacturer’s specifications and documented. Notes: • Sale is without any warranty or guarantee. • No return or renegotiation. • Subject to prior sale. All information provided is without obligation. The seller accepts no liability for possible errors, omissions, or changes in the details. Sale is exclusively subject to prior sale.

Year of construction: 2025, condition: new, Item: AV-11621-23-Vertical15m3 NEW - Never used! Vertical stainless steel tanks - 2 pcs. Exterios dimensions: Dia Ø 2435 mm Total H 4093 mm. Cylinder 396 mm. Vertical stainless steel tanks - 2 pcs. Csdpfx Ajibig Tsgzjpw AISI 316

Condition: used, Year of construction: 2002, Krupp cone crusher Type Krupp Kubria 90/1-08 Codpovy Hy Eefx Agzopw Year of manufacture 2002

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Item: AV-12021-AV12022-Vetical tank 23,800L Exterior dimensions: Dia Ø mm Total H 7200 mm. Cylinder height 5900 mm. Leg height 800 mm. Vertical stainless steel tanks - 2 pcs. Isolated with jacket. Side mounted agitator. Conical bottom Ø63 mm outlet. Cpodpfsq Dafhsx Agzew Conical top with CIP and pressure/vacuum valve. Year 2000. Brand: Randers Rustfri Stålindustri A/S. 2 x identical! AISI 304.