Condition: good (used), Year of construction: 1992, SCHROEDER mosaic press 160mm. Bonding patterns: line: Crodsr Iyrmepfx Aqvsi - square plate 640x320 mm - parallel parallel plate 640x320 mm

Year of construction: 2006, condition: used, Technical specifications: Type: P2M L 24/09 Year of manufacture: 2006 Serial number: 94600105 Voltage: 400 V Frequency: 50 Hz Power consumption: 53 kW Current: 81 A Weight: 8150 kg Machine dimensions: Machine width: 410 cm Machine length: 160 cm Machine height: 330 cm Cedpfx Asg Ty Twoqveri Control cabinet dimensions: Control cabinet width: 100 cm Control cabinet length: 50 cm Control cabinet height: 160 cm

Condition: excellent (used), Year of construction: 1997, Clamping machine Italpresse model SP 30-8 year 1997 S/N 978612997 working lenght approx. 3000mm working width 600mm working height min-max 450 - 1250mm 12 pcs supports 8 pcs pneumatic pressure cylinder Dimensions L x W x H = 3,5m x 0,8m x 2,24 m 1150 Kg Cjdohwwnropfx Aqvori technical information under subject of correction

Condition: excellent (used), Maweg Vertical Press Working length: 500 cm Cjdpfx Aqjhglr Devori Working height: 280 cm Pressure: 160 kPa

Condition: excellent (used), Block press horizontal 5000 mm length 800 mm width 12 cylinders 5 hold downs Csdpfx Aqol D T D Eevori

Condition: as good as new (ex-display), Technical specifications: Total pressing force max. 700 kN Setting range 10 – 100 % Total pressing surface 2500 x 1250 mm Crjdpfofhqhaox Aqvei Specific pressure at full charge 2,2 daN/cm² (kg/cm²) 4 cylinders 80 mm diameter 400 mm stroke Operating hydraulic pressure 348 bar Daylight height 400 mm Heating platens: Electric heating platen 2500 x 1250 mm, surfaces are anodized and therefore extremely hard, resistant against scratches and abrasion. Thermic high pressure insulation between the heating platen and the pressing table. Maximum operating temperatures 120°C.

Condition: new, Year of construction: 2026, The Concept Eco and Concept Primus are the ideal assembly support for dowel construction at the case goods as well as drawer production. Short introduction: • With workpiece tolerance compensation (System GANNOMAT) • 2 Potentiometer for stepless adjustable pressing force • Pressing force min. 300/500 daN (kg) at Concept Eco resp. Pressing force min. 600/800 daN (kg) at Concept Primus • Pressing force max. 2200 daN (kg) at Concept Eco resp. Pressing force max. 3500 daN (kg) at Concept Primus Crodpfsdx R Dmsx Aqvei • 3 Pressing velocities and adjustment rates 5 /10 / 25 mm/sec. (with fine positioning / creep feed) • Adjustable clamping cycle time with automatic opening • Simple operation by 6 individual push buttons for 8 motion sequences

Condition: new, Year of construction: 2026, The composition of the cabinet handling systems to create a manual, semi- or fully-automatic cabinet assembly line is depending on individual production requirements. Cjdpedx R D Defx Aqvori Cabinet assembly lines that will make work easier, reduce set-up time and increase precision, we will explain to you in a personal conversation.

Condition: new, machine/vehicle number: A2306/9210, The pneumatically working drawer clamp type Box V3.0 ensures a simple and fast assembly of drawers and frames. Thanks to its functional design, it is possible to press single parts as well as complete drawers with different connections. This way, a perfect connection as well as shape of the drawer can be guaranteed. Because of the special clamping process, folding connections and drawer fronts with glass insets cannot be deformed. Maximum clamping power: vertical: 800 kg / horizontal: 800 kg Adjustable depth stops allow clamping of drawers with longer fronts Lateral press units slowly approach the workpiece Machine operation via joystick. Special equipment: - Digital positioning readout Codpfjgqfnzjx Aqvori - Kit Door (for frontal clamping of drawer corners) Advantages: - High flexibility: Variably adjustable clamping unit for drawers and frames of different dimensions - Minimum set-up times allow high output - Intuitive operation - High safety standards due to CE-conformity e.g. 2-hand-operation - Plug & Play

Condition: new, Year of construction: 2025, IDEAL FOR STAIRCASE CONSTRUCTION other versions available upon request - 5 levels - Clamping depth 1050 mm - 1 pressure bar, 1500 mm long, 60 mm high, per level - 3 continuously adjustable pivoting counter supports, 400 mm long, per level - 2 pressure plates with handwheel, per level Csdsgu D Rmopfx Aqvsri - 5 support arms, per level - all support arms with plastic pads (glue-resistant) - maximum clamping length 1600 mm - Powder-coated (glue-resistant): gray-white RAL 9002, moving parts light blue RAL 5012 - The presses are delivered ready for operation, complete with pressure regulating valve and standard air connection.

Condition: excellent (used), functionality: fully functional, Stromab STA 2500 pneumatic assembly press Codpfx Aozhv Tyeqveri Working length: 2500 mm Working width: 1200 mm Clamping force at 8 bar: 2600 kg 2x side clamping Pneumatic control CE certified

Condition: used, Comafer Dinamic 70/60 briquetting machine Engine power: 5.5 kW, Briquet diameter: 70 mm, Output: approximately 70 kg/h Hopper diameter: 100 cm Weight: approximately 1,000 kg Codozh I Ipjpfx Aqvsri The machine is in good working order and can be tested before purchase.

Condition: used, Technical specifications: Working length: 3000 mm Working width: 1200 mm Cedpfxjziacuo Aqvjri Maximum wood thickness: 120 mm Overall dimensions: Length: 2100 mm Width: 3700 mm Height: 2200 mm

Condition: ready for operation (used), Schöberl Gluing Stand can be moved on both sides 8 clamping elements, 4 per side 2 heating rails Crsdpfx Ajzlwpqoqvei 2 pressure bars Condition: used Price: 1800

Condition: excellent (used), functionality: fully functional, shelf length: 3000 mm shelf width: 1300 mm Crjdozx Aicepfx Aqvji integrated, electrically powered water heating system 6 hydraulic cylinders 5 loading cycles safety shear pin CE marking

Condition: excellent (used), functionality: fully functional, shelf length 3000 mm shelf width 1300 mm water heating 6 vertical hydraulic pressing pistons diameter of pistons 70 mm 3 hydraulic thrust pistons for stop movement diameter of pistons 80 mm 6 horizontal hydraulic cylinders loading table 1800x3000 mm unloading table 1500x3000 mm Cjdozxp R Hepfx Aqvori

Condition: excellent (used), functionality: fully functional, shelf length: 3000 mm Credjzx U Haepfx Aqvji shelf width: 1300 mm clearance between shelves: 30 cm oil heating 6 hydraulic cylinders safety shear pin

Condition: used, Technical specifications: Number of pistons: 4 Piston diameter: 80 mm Connection to central heating system Credpfx Aszynkbsqvei Shelf dimensions: 2500 x 1300 mm Clearance: 400 mm Hydraulic clamping system Safety switch Engine power: 1.5 kW Engine speed: 2800 rpm Power supply: 400 V Machine dimensions Length: 3260 mm Width: 1560 mm Height: 2000 mm

Condition: excellent (used), Year of construction: 2026, functionality: fully functional, Equipment: CE marking, TECHNICAL SPECIFICATIONS Maximum mounting hole dimensions: 3500 x 2500 mm Minimum mounting hole dimensions: 250 x 350 mm Vertical cylinders: 2 pcs, ø 65/40 mm, stroke 1300 mm Total lifting capacity of vertical cylinders: 7.4 tons Horizontal cylinders: 2 pcs, ø 50/30 mm, stroke 1500 mm Total lifting capacity of horizontal cylinders: 2 tons Hydraulic unit 1.5 kW *The maximum size of the workpiece will be smaller than the maximum operating range of the press, depending on the type of joint (dovetail or pin) and the method of positioning the workpiece in the machine (pre-assembled or unassembled). PRESS DESCRIPTION • 3 positions for the lower beam • Pressure is adjusted directly from the hydraulic unit using a knob; the current pressure is displayed on an indicator during operation. • All electrical components are manufactured in accordance with European standards; each component has a code corresponding to the marking on the electrical diagram. • Hydraulic unit with a pump in an oil bath for better noise reduction and lubrication. A 1.5 kW motor is installed on the oil tank. • The rack and pinion system allows for precise movement of the upper beam. • The supporting structure is made of welded iron elements, Fe 430 grade. Crodpfx Aoznv A Uoqvei • Control panel: - Button for vertical movement of the beam - Button for vertical clamping - Button for opening the horizontal clamping corners - Button for horizontal clamping of the corners - Additional button for two-handed activation of the press functions Warranty: 12 months on spare parts

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, total length: 3,050 mm, total width: 1,400 mm, Equipment: CE marking, 3050 mm x 1400 mm automatic membrane press with turnover and pin system. Has two tables. Crodpfozp H Iksx Aqvei 320 Bar Working Pressure 60 N/cm^2 Spec. Press. 3000 kN Max Pressure 400V 50hz Ready to use in Turkey; can ship abroad.

Condition: used, Year of construction: 2023, functionality: fully functional, CLT Cross-Laminated Timber (CLT) production line with CNC machining center Capacity: approx. 25,000 m³/year (2-shift operation) Functional Description / Scope of Supply: - Longitudinal lamella feeding: Loading – Singulation - Cross lamella feeding: Loading – Vacuum destacking – Feeding to planer - Formation and buffering of longitudinal layers: Longitudinal layer preparation and discharge station - Formation and buffering of cross layers: Two-stage cross layer buffer – Cross layer discharge station - Layup and gluing area: Vacuum layup gantry – Adhesive application gantry – Layup table Codpfx Aqexzy N Severi - CLT press: TimberPress X331 - Outfeed area after CLT press: Cross transfer carriage to buffer stations, Reichenbacher system and discharge station with flipping unit - Reichenbacher CNC machining center CLT blanks (LxWxH): Min.: 6,000 x 2,000 x 60 mm Max.: 12,040 x 3,140 x 350 mm 3–9 layers Raw material: Longitudinal layers (LxWxH): Min.: 6,000 x 100 x 20 mm Max.: 12,040 x 280 x 50 mm Cross layers (LxWxH): Min.: 2,000 x 105 x 23 mm Max.: 3,140 x 285 x 53 mm Price and further information available on request.

Year of construction: 2003, condition: used, Drawer press ZUB / ZVB Central Fixture Construction. Used. Dimensions (W x H x D): approx. 220x210x110 cm, with 4 pressing units, electrically movable, 1 control cabinet, operator terminal. Cedpfx Aqox Dkw Ssvori

Condition: used, Drawer Press ZVB/ ZUB Dimensions (W x H x D): approx. 250x200x100 cm, with 3 press rams, of which 2 are electrically movable, control cabinet, operating terminal, 1 KUPER glue application unit, 1 drilling unit, Csdpfxjx Dkyge Aqvjri

Condition: new, - NEW - Standard configuration: - 3 pressing units, 90-degree stop. - 1 side pressure device with 2 trapezoidal spindles. Description: A multifunctional gluing and frame press for precise and angle-accurate assembly, ideal for gluing drawers, carcasses, panels, and much more. The pressure units use trapezoidal spindles with pressure bearings made from precision tubes, delivering 2 tons of pressure and a 120 mm stroke. Pressing units mounted on ball bearing guides, galvanized, with a 100 mm precision hole grid. All profiles are made from thick-walled rectangular tubes. Clamping dimensions: (HxW) 1170 x 2110 mm Including special accessories: 1 pressing unit with trapezoidal spindles for LEIMO PRO 2 hold-down clamps for LEIMO PRO Credpfxexcyxie Aqvei

Condition: excellent (used), Technical specifications: Number of pistons: 6 Piston diameter: 140 mm Connection to central heating Shelf dimensions: 3500x1300 mm Clearance: 120 mm Csdpfsw U Nvpox Aqveri Hydraulic pressing Motor power: 5.5 kW Power supply: 380 V Overall dimensions: Length: 4600 mm Width: 1320 mm Height: 2800 mm