Case Clamp

Gannomat Concept Eco

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical specifications: Fully equipped in standard version with: - Robust, torsion-free steel frame, welded and bolted construction - Lamella pressure beam TOP with 6 elements, lamella pressure beam SIDE with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly compressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates - Continuous pressing surface, height 95 mm, on lower vertical pressure beam - Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance ball nuts with grease reservoir - The pressing process is carried out electromotorically, via 2 independent worm gear motors (2 x 0.75 kW) - Pressing force of the pressure beams is infinitely variable and electronically controlled by 2 potentiometers, regulated via frequency inverter, ensuring absolutely wear-free force control - Pressing force for horizontal pressure beam: min. 500 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing force for vertical pressure beam: min. 300 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing and adjustment speed of the beams with fine positioning, using 3-stage selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcasses at 45° - Simplest operation via 6 separate push buttons, 8 movement cycles selectable via control panel - Freely adjustable press time preselection 0-30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressure beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm Ppodpfx Anjw Nafkszew Including surcharge for rapid traverse speed, for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, the sensors can be deactivated for pressing special components Including a set of machine feet for 500 mm working height Location: Flörsheim Availability: Short-term

Condition: new, Year of construction: 2026, Working area: 1500 – 3000 x 2100 – 12000 mm Z axis range: 500 – 1500 mm Linear bearing: Bosch Rexroth 35 Speed: X, Y up to 45 m/min; C, A up to6000 degrees/min Program resolution: 0,0005 mm Positioning accuracy: 0,01 mm Gate drive: double-sided master / slave with gate angle correction Electrospindles: 8 kW up to 36 kW Electrospindle inverter: yes Maximum revolutions of the electro-spindle: 24 000 rpm (option 6000, 40 000 50 000) Construction: Steel welded, ribbed, stress relieved, precision machined Table type vacuum, hybrid, steel, aluminum with M16 or M18 holes Ppjdpfxjn Nv H Ss Anzjw

Condition: new, Year of construction: 2026, Gannomat Concept 70 Eco Lamella – Carcase Press with Rapid Traverse Technical specifications: Lamella carcase press from our showroom; Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm, depth 700 mm; - Upper lamella pressing beam with 6 elements, side lamella pressing beam with 5 elements - Lamella pressing beams with field-proven tolerance compensation for tightly pressed carcase joints - Counter-pressure surfaces are continuous, coated support plates, 40 mm thick - The pressing force of the pressing beams is infinitely variable via two potentiometers and set electronically via frequency converter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressing beams: min. 500 daN (kg) up to infinitely adjustable 2,200 daN (kg) max. - Pressing force for vertical pressing beams: min. 300 daN (kg) up to infinitely adjustable 2,200 daN (kg) max. - Including option: Ppodpsy Egz Sofx Anzow Rapid traverse speed for quick positioning of the pressing beams, controlled by automatic workpiece detection with sensors in the pressing beams; pressing speed 5/10/25 mm/sec and rapid traverse speed 50 mm/sec. Sensors can be deactivated for pressing special parts. - Jog mode for precise positioning of both pressing beams, e.g., for low pressing forces, drawers, and carcases at 45 degrees. Easy operation via six separate push buttons, freely adjustable pressing time preselection with automatic opening feature, loading height 300 mm. The machine is available from our showroom and can be delivered immediately. Location: ex-stock 54634 Bitburg - available immediately -

Condition: as good as new (ex-display), Year of construction: 2026, Technical specifications: Ppodsb Eln Dopfx Anzsw Laminated panel press from our showroom; Working area: width from 150 - 2,550 mm, height from 150 - 1,400 mm, depth from 150 - 700 mm; Variable pressure adjustment 300/700/1100/1400/1800/2200 dN (kg) of the side pressing beam; Variable pressure adjustment 500/800/1200/1500/1900/2200 dN (kg) of the top pressing beam. Simple operation via 6 separate push buttons, freely adjustable pre-selection of pressing time with automatic opening function, loading height 300 mm. The machine is in our showroom and can be delivered immediately. Location: available from our warehouse in 54634 Bitburg.

Condition: used, Dimensions: L 6990 mm, W 2500 mm, H 2720 mm. Weight 4191 kg. Tipping device for 140-660 l containers Ppsdpfovkn Nvjx Anzjw

Condition: new, Year of construction: 2025, Gannomat Concept 70 Eco Laminate – Body press with rapid traverse Technical data: Laminate body press from our showroom; Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements - Laminate press beams with proven tolerance compensation for tight body joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) - Including option: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Ppedpfxoiidm Ns Anzow Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm The machine is in our showroom and can be delivered immediately. Location: in stock at 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2024, New display machine! List price: €32,665,- complete in standard configuration with: Sturdy, torsion-resistant steel frame constructed with welded and bolted assemblies. Louvered top press beam with 6 elements; louvered side press beam with 5 elements. Louvered press beams feature the proven Ganner system tolerance compensation for tightly pressed carcass joints. Counterpressure surfaces (side pressure wall and bottom) are 38 mm thick, coated, continuous support plates. Continuous pressing surface with a height of 95 mm at the lower vertical press beam. Electromotive adjustment of both press beams via precision trapezoidal threaded spindles (with increased pitch and running accuracy) and high-performance running nuts with grease reservoir. Pressing is performed electromechanically via two separate worm gear motors (2 x 0.75 kW). The pressing force of the press beams is continuously adjustable via 2 potentiometers and controlled electronically by frequency converters, ensuring absolutely wear-free force control. Pressing force for the horizontal press beam: min. 500 daN (kg), steplessly adjustable up to max. 2200 daN (kg). Pressing force for the vertical press beam: min. 300 daN (kg), steplessly adjustable up to max. 2200 daN (kg). Pressing and adjustment speed of the press beams with fine positioning, selectable via three-position rotary switch: 5 / 10 / 25 mm/second. Very simple operation using 6 separate push buttons; 8 movement sequences selectable via control system. Freely adjustable pressing time preselection with automatic opening from 0–30 min (switchable to seconds or hours). Working height/feed height: 300 mm. Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm. Weight: approx. 1800 kg net. Dimensions (Length x Width x Height): 3.45 m x 0.95 m x 2.30 m. Electrical connection: 400V, 3Ph, 50Hz (3.2 kVA, 16A). Additional equipment: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams. Pressing speeds of 5 / 10 / 25 mm/sec and rapid traverse speed of 50 mm/sec; sensors can be deactivated for pressing special components. 1 set of machine feet (working height 500 mm). Storage location: Pedpfx Aneuf Hx Hjzjpw

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 550 h, machine/vehicle number: 99, 🚀 GEDA 500 Z – OKOMITA GRAĐEVINSKA DIZALICA NA ZUBASTU LETVU Rabljena, 2015. godina – potpuno servisirana u GEDA Njemačka Jamstvo: 12 mjeseci 🏗️ POUZDAN NJEMAČKI STROJ – SPREMAN ZA RAD GEDA 500 Z je profesionalna okomita građevinska dizalica za materijal, idealna za podizanje teških i glomaznih tereta. Zahvaljujući robusnoj GEDA konstrukciji i jednostavnom održavanju, ovaj model se godinama pokazuje kao jedna od najpouzdanijih dizalica u industriji. Dizalica je servisirana direktno u GEDA Njemačka, potpuno obnovljena i isporučuje se s jamstvom od 12 mjeseci. ⚙️ TEHNIČKE SPECIFIKACIJE Proizvođač: GEDA (Njemačka) Model: 500 Z Godina proizvodnje: 2016. Pogon: 5,5 kW / 400 V / 50 Hz Visina dizanja (max): 100 m Nosivost: 500 kg Brzina dizanja: 30 m/min Dimenzije platforme: 1,4 × 1,6 m Mast sistem: GEDA UNI-X-MAST OPTIČKO STANJE: ODLIČNO - PUNO NOVIH DJELOVA Ppedpoxvygasfx Anzjw TEHNIČKO STANJE: ODLIČNO - SVAKA DIZALICA POSJEDUJE KONTROLNI LIST PROIZVOĐAČA GEDA DA JE DIZALICA POTPUNO ISPRAVNA 🧰 PRIBOR ZA VISINU DIZANJA DO 20 m Elektromotor s košarom Kabel za visinu dizanja do 50 m – 1 kom ČELIČNI STUP 1,5 m sa zupčastom letvom – 13 kom Učvršćenje za stup – 4 kom Vodilica za kabel – 3 kom Kompletno servisirano, spremno za rad 💡 DODATNE INFORMACIJE ✅ Dizalice servisirane i testirane u Njemačkoj ✅ Jamstvo 12 mjeseci od dana kupnje ✅ GEDA certifikat i dokumentacija proizvođača ✅ Platforma se zakreće za 90° radi lakšeg utovara i istovara ✅ Transportni sustav na jednoj osi dostupan u dodatnoj opremi ✅ Upute dostupne na hrvatskom, njemačkom i engleskom jeziku 🆕 NUDIMO I NOVE GEDA DIZALICE I KOMPLETNU OPREMU Uz rabljene, u ponudi imamo i nove GEDA dizalice i liftove svih tipova: Okomite i kose građevinske dizalice Platforme za materijal i osoblje Pribor i dodatke za sve GEDA modele Sve nove i rabljene, obnovljene GEDA dizalice dolaze s punim jamstvom, certifikatom proizvođača i mogućnošću isporuke odmah. PRVA RUKA – GENERALNI ZASTUPNIK GEDA DIZALICA ZA HRVATSKU VEĆ VIŠE OD 30 GODINA. Specijalizirani za prodaju, najam, servis GEDA liftova, dizalica i kompletne opreme.

Condition: new, Year of construction: 2025, functionality: fully functional, Gannomat Concept 70 Eco body press Year of manufacture 2025 including the following options: - Rapid traverse speed adjustment speed up to 50 mm/sec - Machine feet (working height 500mm) Psdpfx Anjvxgrrozspw The Concept Eco and Concept Primus are ideal assembly aids for dowel connections when pressing bodies together, as well as when making drawers. Brief introduction: • With tried and tested tolerance compensation (GANNOMAT system) • 2 potentiometers for continuously adjustable pressing force • Pressing force min. 300/500 daN (kg) for Concept Eco or Pressing force min. 600/800 daN (kg) for Concept Primus • Pressing force max. 2200 daN (kg) for Concept Eco or Pressing force max. 3500 daN (kg) for Concept Primus • 3 pressing and adjustment speeds 5/10/25 mm/sec. (with fine positioning / creep speed) • Freely adjustable pressing time pre-selection with automatic opening • Concept Eco: Simple operation via 6 separate push buttons for 8 movement sequences • Concept Primus: Simple operation via LCD display Universal application area: • Bodies e.g. for furniture and cabinets • Mitered bodies • Bodies with protruding lids • Drawers • Pressing several bodies / drawers Advantages: • Tried and tested tolerance compensation (GANNOMAT system) • Electromechanical body press with frequency-controlled gear motors • Independent vertical and horizontal press beam • Long service life thanks to tried and tested, high-quality components • Solid and robust construction • Space-saving design • Body pressing = Simple + Fast + Efficient + Flexible + Precise + Professional • Simple thanks to simple and practical control panel • Fast thanks to press beam positioning speed of up to 50 mm/sec (option) • Efficient thanks to precise pressing of a wide variety of body sizes • Flexible thanks to adjustable parameters such as e.g. Pressing force, pressing time, travel speeds • Precise through precise angle pressing of furniture bodies and drawers • Professional production of bodies and drawers using modern body presses

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Pedpfx Asxwaz Honzopw