Condition: used, functionality: fully functional, Manni shelving press for veneering, 2500×1300 Shelf length: 2500 mm Codpfx Aezmh Ndsqvjri Shelf width: 1300 mm Feed height: 410 mm Working pressure: 300 bar Press with 4 cylinders

Condition: used, Brand:Comil Type:CF2000 E+N Automatic cabinet press Comil Techn info: Working length 2500mm Working width 600mm Working hight 1200mm Max throughfeed width 720mm Feedingspeed 7,5-37,5m/min Adjustable time for the horizontal pistons 6,85m/min Woring air pressure 6-8 bar Consumption per working cykle 115dm3 Power 400 volt, 50 Hz, 3 phase Csdpfx Aqoimdx Tjvori Machine dimension:7050x720x2600/3680mm (lengthxwidthxhight) max max hight with pistons up) Stock no:2000365BXA Note:The film shown is from a simular machine

Condition: like new (used), Year of construction: 2014, briquette diameter: 150 mm, overall weight: 3,000 kg, power: 30 kW (40.79 HP), Capacity: 450-500 kg/h Max. pressure force: 1700kg/cm2 Batch moisture content: 15% Length: 1800 mm Width: 1800 mm Height: 1900 mm Codpfxoqd Uy As Aqvori Transport height: 2200 mm Weight: 3000 kg Total power: 33 kW

Year of construction: 2016, condition: reconditioned (used), press aggregate with 2 hydraulic press arms around the glued board slats in the mechanical press offset free to press. (instead of using a big hammer or big weights on the crane hook) Crjdpfx Aed Dcmqoqvsi

Condition: as good as new (ex-display), Year of construction: 2021, input current: 81 A, input frequency: 60 Hz, type of input current: three-phase, total length: 1,830 mm, total width: 1,618 mm, total height: 2,400 mm, overall weight: 5,000 kg, operating temperature: 140 °C, cylinder diameter: 65 mm, opening width: 100 mm, Shelf press for veneer , plywood , MDF, particle board, solid wood, etc. Manufacturer : JOOS Model: HPS 20 Csdst Eq E Sepfx Aqveri year of production 2021 Total pressure force : 200 kN 4 cylinders ⌀ 65 mm x 400 mm Maximum hydraulic working pressure : 150 bar Pressure : 2.0 daN / cm2 5 heating plates size : 1000mm x 1000mm Operating temperature : 0℃ - 140℃. Infinitely adjustable temperature. Timer to set the working time , after the set time the press automatically opens. Heating power - 5 x 12 kW Total power - 64 kW (81A , 60Hz) Weight - 5000 kg Press new - never used Full technical documentation included.

Condition: used, functionality: fully functional, working width: 3,000 mm, HOT PRESS MANNI - Platen dimensions 3000x1300 mm - N. 6 cylinders - Boiler with hot water - wooden waste Codpfxox Rqtie Aqveri

Condition: used, functionality: fully functional, VERTICAL CLAMP FOR WINDOWS ITALPRESSE Credpfsx Rrp Ejx Aqvoi

Condition: used, SECOND-HAND MULTIPLATENS BENDING PRESS Cedpfxjwry H Ue Aqvjri - 7 platens - Platen dim. mm. 800x800 - Opening mm. 1600/1800 - Cylinder diam. 350 mm.

Condition: used, SECOND- HAND BENDING PRESS FORGIARINI - Platens dim. mm. 1400X800 Crsdpfxjwr Advs Aqvji - Light 900 mm. - 2 cylinders mm. 100

Year of construction: 2002, condition: used, SECOND-HAND HYDRAULIC CLAMP WITH FOLDING BENCHES RODEA MOD. S - CE RULES - Year 2002 Credpfx Aqjwr A Stevsi

Condition: excellent (used), Shelf length: 250 cm Csdpexgnp Dsfx Aqvori Width: 130 cm Four actuators

Condition: used, Year of construction: 1993, Used machine Year of construction 1993 Automatic frame press Working area 3550 x 2400/2600 mm pressure range 120 bar Pressure per 21000 N/kp Cylinder stroke vertical 250 mm, horizontal 20 or 80 mm Automatic control Electrical connection Credpfx Aqsw I Ui Usvji with medium pressure bar Special equipment: Impulse "Open press" Vertical positioning device Width compensation allowance for 1 MB 1 additional horizontal pressure cylinder Spring weight compensation Work safety device pull rope Installation dimensions 5150 x 1500 x 3340 mm Weight 2500 kg Electrical connection 3.5 kW Compressed air connection R 3/8" max 8 bar Availability: short term Location: Röllbach

Condition: used, SECOND HAND BENDING PRESS Cjdpfx Ajrnnqtjqveri - Plates dimensions mm. 3100X800 - Opening mm. 800 - 8 cyl. diam. 80 mm.

Condition: used, Year of construction: 1994, Frame press, Schafberger & Sprödhuber Type Super 4 kW Crodpfxeilurne Aqvji 3 m x 6 m

Condition: excellent (used), Block press horizontal 5000 mm length 800 mm width 12 cylinders 5 hold downs Cjdpfx Aqsl D T D Eoveri

Condition: as good as new (ex-display), Technical specifications: Total pressing force max. 700 kN Setting range 10 – 100 % Total pressing surface 2500 x 1250 mm Specific pressure at full charge 2,2 daN/cm² (kg/cm²) 4 cylinders 80 mm diameter 400 mm stroke Operating hydraulic pressure 348 bar Daylight height 400 mm Heating platens: Electric heating platen 2500 x 1250 mm, surfaces are anodized and therefore extremely hard, resistant against scratches and abrasion. Thermic high pressure insulation between the heating platen and the pressing table. Maximum operating temperatures 120°C. Codpfx Asfhqhajqvsri

Condition: new, Year of construction: 2026, The Concept Eco and Concept Primus are the ideal assembly support for dowel construction at the case goods as well as drawer production. Cjdsdx R Dmopfx Aqvjri Short introduction: • With workpiece tolerance compensation (System GANNOMAT) • 2 Potentiometer for stepless adjustable pressing force • Pressing force min. 300/500 daN (kg) at Concept Eco resp. Pressing force min. 600/800 daN (kg) at Concept Primus • Pressing force max. 2200 daN (kg) at Concept Eco resp. Pressing force max. 3500 daN (kg) at Concept Primus • 3 Pressing velocities and adjustment rates 5 /10 / 25 mm/sec. (with fine positioning / creep feed) • Adjustable clamping cycle time with automatic opening • Simple operation by 6 individual push buttons for 8 motion sequences

Condition: new, Year of construction: 2026, The composition of the cabinet handling systems to create a manual, semi- or fully-automatic cabinet assembly line is depending on individual production requirements. Cabinet assembly lines that will make work easier, reduce set-up time and increase precision, we will explain to you in a personal conversation. Crodpfx Aqedx R D Devei

Condition: new, machine/vehicle number: A2306/9210, The pneumatically working drawer clamp type Box V3.0 ensures a simple and fast assembly of drawers and frames. Thanks to its functional design, it is possible to press single parts as well as complete drawers with different connections. This way, a perfect connection as well as shape of the drawer can be guaranteed. Because of the special clamping process, folding connections and drawer fronts with glass insets cannot be deformed. Maximum clamping power: vertical: 800 kg / horizontal: 800 kg Adjustable depth stops allow clamping of drawers with longer fronts Lateral press units slowly approach the workpiece Machine operation via joystick. Special equipment: - Digital positioning readout Cedogqfnzopfx Aqvjri - Kit Door (for frontal clamping of drawer corners) Advantages: - High flexibility: Variably adjustable clamping unit for drawers and frames of different dimensions - Minimum set-up times allow high output - Intuitive operation - High safety standards due to CE-conformity e.g. 2-hand-operation - Plug & Play

Condition: new, Year of construction: 2025, IDEAL FOR STAIRCASE CONSTRUCTION other versions available upon request - 5 levels - Clamping depth 1050 mm - 1 pressure bar, 1500 mm long, 60 mm high, per level - 3 continuously adjustable pivoting counter supports, 400 mm long, per level - 2 pressure plates with handwheel, per level - 5 support arms, per level - all support arms with plastic pads (glue-resistant) Crsdpfxegu D Rme Aqvsi - maximum clamping length 1600 mm - Powder-coated (glue-resistant): gray-white RAL 9002, moving parts light blue RAL 5012 - The presses are delivered ready for operation, complete with pressure regulating valve and standard air connection.

Condition: excellent (used), functionality: fully functional, Stromab STA 2500 pneumatic assembly press Working length: 2500 mm Working width: 1200 mm Clamping force at 8 bar: 2600 kg 2x side clamping Crodszhv Tyspfx Aqvei Pneumatic control CE certified

Condition: used, Comafer Dinamic 70/60 briquetting machine Engine power: 5.5 kW, Briquet diameter: 70 mm, Output: approximately 70 kg/h Cedpfxszh I Ipj Aqvori Hopper diameter: 100 cm Weight: approximately 1,000 kg The machine is in good working order and can be tested before purchase.

Condition: excellent (used), functionality: fully functional, shelf length: 3000 mm shelf width: 1300 mm Cedpjzx Aicofx Aqvori integrated, electrically powered water heating system 6 hydraulic cylinders 5 loading cycles safety shear pin CE marking

Condition: excellent (used), functionality: fully functional, shelf length 3000 mm shelf width 1300 mm water heating 6 vertical hydraulic pressing pistons diameter of pistons 70 mm 3 hydraulic thrust pistons for stop movement diameter of pistons 80 mm Codpszxp R Hofx Aqvori 6 horizontal hydraulic cylinders loading table 1800x3000 mm unloading table 1500x3000 mm

Condition: excellent (used), functionality: fully functional, shelf length: 3000 mm shelf width: 1300 mm clearance between shelves: 30 cm Codjzx U Haepfx Aqvsri oil heating 6 hydraulic cylinders safety shear pin