Condition: excellent (used), Year of construction: 2020, New hydraulic heating platen press Manufacturer: ITALPRESSE, Type XL/6 30-13 with gold-anodized plates Touch display control system - Electric heating platens 3,000 x 1,300 mm - Total pressing force: 90 tons - Number of heating plates: 2 pcs. - Number of levels: 1 - Cylinder stroke: 350 mm - Daylight opening: 350 mm - All-around loading possible - Number of hydraulic cylinders: 6 pcs. - Cylinder diameter: 85 mm - Hydraulic unit power requirement: 3 kW - Electric heating plates made of solid hard aluminum with built-in heating wires - Heating capacity: 22 kW Iedsxgbxfopfx Aalohw - High-pressure insulation plates - Working temperature: 90° C - Max. temperature: 120° C - Operating voltage: 400 V, 50 Hz - Safety specifications according to CE standard Standard equipment: - Movement of the press table with rack-and-pinion and parallel guides at 2 corners of the press table made from self-lubricating material - Electronic control unit with touch screen for machine control and monitoring - Digital timer for adjusting pressing time and automatic opening - Digital input and monitoring of pressing pressure - Digital timer for adjusting pressing time - Digital diagnostics and fault display - Safety circuit with two-hand operation - Safety pull cord - Safety support for lower press table Accessories included: - Touch Screen TS/400 - EFC electronic flatness control - Gold-anodized heating plates (Busse) Location: Ex stock - Immediately available -

Year of construction: 2026, condition: as good as new (ex-display), Vacuum - membrane press VP - Series are the optimal solution for woodworking. VP 3000 is equipped with the heating technology, which shortens the drying time of the glue, so that the efficiency is higher. Possible applications: Veneer / form gluing / wrapping... Coating of different profiles (veneer,paper, plastic...) Wood bending: production of bent and layer-glued components The heating system is equipped with temperature control Rubber membrane 2,5 mm Table top is made of plastic 12 mm Oil-free Becker vacuum pump 25 m3/h The control system of the vacuum / tank capacity 15 l working area: 3000x1500mm Ihjdodwh E Aepfx Aalow Heating system temperature: Max. 60 degrees C heating system: KW 4,5 Pump capacity: KW 0,75 Vacuum pump flow rate: 25 m3/h Rubber membrane Dimensions outside: 3100 x 1650 x 1600 mm Weight: 450 kg Machine is equipped with a chassis. Location: From warehouse 54634 Bitburg - free on truck -

Condition: like new (used), Year of construction: 2026, operating hours: 1 h, Super special price, as it was on display at our in-house exhibition. Operating hours: 2 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Iedotnz Hbopfx Aalehw Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: new, Year of construction: 2026, Compact design, high reliability and an excellent price-performance price-performance ratio: these are the advantages of this machine machine, which is perfectly suitable for briquetting materials such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a sturdy base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044x1044 mm hopper height: 1010 mm hopper capacity: 1,1 m³ driving power: 4 kW Isdpebtnf Eefx Aalshw Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil capacity (l) 100 Weight (kg) 530 Equipment: Press Powerful press mechanism with low-wear, chrome plated tongs Precompressor with end-position-suspended cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Tank with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette quantity monitoring Automatic On - Off Location: 54634 Bitburg

Condition: good (used), Year of construction: 1992, functionality: fully functional, WEIMA TH 400 briquetting machine - after technical overhaul - Made in Germany - very good condition - year of manufacture 1992 TECHNICAL PARAMETERS: power of main engine 7.5 kW machine output approx. 80 kg/h briquette diameter 50 mm feeding dimension 2000 x 1800 mm adder feeding the material to the piston stirrer machine overall dimensions (length / width / height) 240 / 190 / 200 cm weight ~ 850 kg TH hydraulic briquetting machines are compact equipment for briquette production. Briquetting machines can be filled manually or automatically directly into the hopper. The units of this series, by their small size and quiet operation, are ideal for setting up on the production floor. Characteristics: - reduction of production waste volume - low purchase costs - low energy consumption - compact design takes up little space - excellent processing quality - durable construction and long service life - trouble-free maintenance and low consumption - simple operation Ijdpfx Aast U Et Nolehw The main application scopes of briquetting presses are, for example: - in combination with a dust extraction or filtration and dedusting plant - for manual feeding of material - as a whole combined with a chipper (e.g. WEIMA WL4) - with a screw feeder or conveyor belt - with a mobile dust extraction system or combustion furnace

Condition: like new (used), Year of construction: 2012, operating hours: 21,000 h, functionality: fully functional, year of last overhaul: 2024, protection type (IP code): IP54, Briquetting Press RUF 400 COMPLETE BRIQUETTING LINE AVAILABLE FOR PURCHASE: Iodpfjxu Ryuox Aaljhw Drum sawdust dryer Feed auger Belt conveyor – 2 pcs Separator with hopper Screw conveyor – 6 pcs Wet sawdust storage bin Fuel storage bin Wood waste boiler Wood waste crusher Extraction fan with cyclone Packing machine with compressor Additional photos and information available upon serious inquiry.

Condition: good (used), Year of construction: 2001, functionality: fully functional, Used pellet mill OGM 1,5 with 75 kw main engine. Capacity from wood about 1 tone/hour. Include a lot of spare part: - new ring die 6mm for wood: Salmatec Brand ( price from manufactory 2700 eur for 1). - New bearing for roller 10 pcs. Ihedpfx Ajx R Suzjaljw - New roller shell 10 pcs. - other spare parts, main axhis, plates for rolles.

Condition: good (used), Year of construction: 2011, Internal flange dimensions 2340 x 1340 mm Ijdpfx Aaetwba Selshw Maximum panel dimensions (20mm thickness) 2340 x 1240 mm Working chamber height 60 mm Total thrust 300 t Maximum specific working pressure 5 kg/cm2 Press cylinders No. 6 diam 140 mm stroke 250 mm Lower moving platen (closing movement from bottom to top) Opening between press platens 230 mm Side load 1400 mm Pvc roller uncoiler Double loading table

Condition: new, Year of construction: 2025, functionality: fully functional, PLATEN LENGTH MM. 3000 PLATEN WIDTH MM. 1300 PRESS STROKE MM. 400 VERTICAL CYLINDERS 6 - DIAM. 70MM. Ihjdpfxoi E Tz He Aaljw INTERMEDIATE PLATENS CONFIGURATED TOTAL THRUST 90 TON TOTAL POWER KW 21 HEATING DIATHERMIC OIL

Condition: refurbished (used), HYDRAULIC HOT PLATE PRESS, MODEL LS/L/R 30/13 SP. 150 mm Composition - LOADER - HYDRAULIC PRESS WITH HOT PLATENS, MODEL LS/L/R 30/13 SP. 150 mm - 3000x1300 mm HOT PLATE ROLLERS UNLOADER Iedpfjn R Dihex Aalshw Press platen dimensions 3000x1300 mm. Press plungers No. 6 Ø 70 mm stroke 200 mm. Press platen thrust 70 t.

Year of construction: 2023, condition: new, Technical data briquetting press: Iedpskuz Tuofx Aaljhw Throughput capacity: 30-60 kg/h The briquetting capacity refers to a bulk density of the starting material of 200 kg/m³! Motor power: 5,5 kW Briquette Ø: 50 mm weight: approx. 680 kg 1680 x 1100 x 1500 mm Equipment: - Automatic start/stop of the briquetting press via rotary vane probe - inspection cover - Transport pipe holder for briquetting press - Inspection window in the container Requirements for the raw material for briquetting: - Moisture content (atro) must be between minimum 6 to maximum 18 %. - Chip length maximum 15 mm - Installation temperature: tempered room at least +5°C - The customer must insure himself against hydraulic oil leakage - The feed must be free of metals and mineral impurities such as sand, stones, etc. Damage to the press tools and / or increased wear can be the result The screen from the crusher should not exceed a size of 10/12 mm.

Condition: good (used), Bale-Pak for pressing shavings in good condition including a scraper conveyor, an ABB stacking robot and an automatic plastic wrapper Isdpfoimv N Tox Aaljhw

Condition: excellent (used), Shelf length: 250 cm Ihodpfxsxgnp Dj Aalow Width: 130 cm Four actuators

Condition: good (used), Code: 0283 Brand: ITALPRESSE Model: 25/13 Fabricated platen for diathermic oil press Technical data: Platen dimensions: mm 2500 x 1300 Max temperature up to 120° Isdpfx Aasyazdisljhw Max working pressure: 3/5 kg/cm2 Heating medium pressure 0,5 ate Composition: Aluminium - Flat gauged steel sheet - Coil of piping for fluid circulation - Reinforcement piping - Flat gauged steel sheet - Insulating material

Condition: used, functionality: fully functional, Performance for 6 mm diameter pellets 2.5-3 t/h We used it for about 5 years. It was purchased used but in very good condition. All bearings were replaced 1 year ago. It was working very well before it was disassembled. A new die with rollers has been manufactured for it and is available for an additional price. Ihjdox S Ibgopfx Aalsw For additional information, please write on Whatsapp.

Condition: excellent (used), Shelf press for veneering Cooper 3000×1300, water-heated Isdpjyi Sfcefx Aaljhw

Condition: new, Wood briquetting press Amis ABP 60 L -Exhibition machine- ----- Technical data ----- Briquette Ø: 60 mm, Hydraulic unit 3 kW: 140 bar, Voltage: 400 V, frequency: 50 Hz, Fuse protection: 16 A, Capacity approx.: 20-35 kg/h, Weight approx.: 300 kg - Easy handling - Hydraulic control - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) - Motor equipped with motor protection switch and emergency stop - No electronic components such as regulators, sensors and sensors or complicated controls - Large storage container Ihedeu R Sxxepfx Aaljw - Tempered briquette tongs - Replaceable press bar - Pressing without the addition of additives - Thanks to the pre-compressor, even voluminous chips can also be processed - No adjustment work or pressure monitoring of the pressure necessary - New exhibition machine -

Condition: excellent (used), functionality: fully functional, working width: 1,200 mm, working length: 3,000 mm, LOMEC Windmill Press 3 GLUING SECTIONS! The press is in excellent condition! TECHNICAL PARAMETERS: - Working length: 3000 mm - Working width: 1200 mm - Pneumatic clamps - 3 gluing sections - 3 side clamps per section Ihedpfx Aaoyr D Rvjlew Machine dimensions: - Length: 320 cm - Width: 125 cm - Height: 260 cm - Weight: 700 kg Financing options available via leasing or installment payments. Simply visit our website: jbsmaszyny.pl You are welcome to test the machine. Where can you see our machines? JBS WOODWORKING MACHINES WOLICA DRUGA 26 23-310 MODLIBORZYCE Nationwide machine transport! Do you have questions? Call or write!

Year of construction: 2026, condition: new, By installing the heaters, we have gained the possibility to speed up the gluing process. After the press has been heated up, the wrapping process takes 5 to 15 minutes. depending on the thickness of the veneer and the glued element. The process is widely used in factories producing furniture, windows, doors and coffins. The flexible membrane enables the gluing of both flat elements, such as: furniture sides, frames and stiles, as well as shaped elements, e.g. panels, door strips and bent fronts. Heaters power 2x2.5 = 5 kW Vacuum pump power 0.75 kW Working voltage 400V Number of phases 3 Operating voltage frequency 50 Hz Working vacuum - 0.8 ± 0.05 bar Working temperature 40-50 ± 5 ° С Maximum temperature 60 ± 5 ° С Length 3050 mm Width 1350 mm Height 1600 mm Protection degree IP2X Noise level ≤ 70 dB Weight 350-400 kg Vacuum pump capacity 25 m3 / h Working dimension 3000 x 1350 mm 700% stretch of the membrane Isdpfjgp I Upox Aalehw Diaphragm thickness 2.7 mm (+/- 0.20 mm)

Condition: new, Year of construction: 2025, The E60 Super briquetting machine is a highly efficient briquetting machine, the speed of which, depending on the processed material, ranges from 40 to 100 kg/h. The device uses a 10kM engine. The briquetting machine is powered by 400V - 50Hz. The output material has a diameter and maximum length of 60mm. The device has a double pressure gauge, a device for measuring the oil level and a viewing window. SIEMENS LCD control, maintenance-free operation of the machine. Processed materials: • sawdust, • paper, • straw • etc. Briquette diameter: 60mm Engine power: 7.5 kW, IE2, high efficiency Efficiency: 40/100 kg/h Cylinder diameter: 1000mm Pressing force: 900 kg/cm2 Maximum briquette length: 60mm Ihodpfx Aetvmf Njalow Power supply voltage: 400 V Dimensions: 1510 x 1850 x 1170 mm Weight: 770 kg Number of cycles: 7/min Number of cylinders: 3 Pump pressure gauge: electronic Oil level and temperature sensor: in the tank Control: PLC Siemens

Condition: excellent (used), Working width 3200 mm year of manufacture 1992 motor power 7 kW pressing time adjustment automatic opening emergency stop switch - pull cord Ihjdjypg Rmopfx Aaljw

Condition: ready for operation (used), working length 3300 mm Iedpeypcxtofx Aalshw working height 1800 mm 3 vertical cylinders 2 horizontal cylinders manual operating mode

Condition: used, Year of construction: 2018, total width: 2,070 mm, total length: 3,000 mm, total height: 1,670 mm, Empty weight: 4.000 kg Price: On request - Year: 2018 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: P0220118 - Max. workpiece length [mm]: 2500 - Max. workpiece width [mm]: 1300 - Max. workpiece height [mm]: 200 - Number of cylinders [pcs]: 6 - Total working pressure [ton]: 90 - Working pressure [kg/cm²]: 3 - Transport dimensions: 3000mm x 2070mm x 1670mm (l x w x h) Iedpfswniqzox Aalohw - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2000, Platters 240cm/115cm Base shoe width 90mm Mobile hydraulic cylinders Horizontal and vertical pressing Motorized press rotation Manual or automatic cycle Ihsdpfx Aajx Eh A Islsw timer 400V

Condition: excellent (used), Steblo PTJ trapezoidal pneumatic press. The press consists of two elements; it is possible to purchase a single section with a width of 3000mm. Height: 900mm Width: 6000mm Maximum thickness: 110mm 8 clamping cylinders 12 leveling clamps Weight: 1560kg Ihsdpfx Aasx Ihurelow Very good condition, ready for operation.