Condition: excellent (used), Year of construction: 2013, Clamping force: 190 t Screw diameter: 50 mm Shot weight: 358 g Distance between tie bars V: 570 mm Cgjbvapgjvx Utksdst Distance between tie bars H: 570 mm Min mould dimensions: 370x370 mm Mould platens: 840x840 mm Shot volume: 394 cm3 Type: Horizontal Drive: Electric

Year of construction: 2006, operating hours: 15,000 h, Condition: good (used), For sale is an Erema 1007T. Year of manufacture: 2006 Operating hours: 15,420 Throughput: 250-350 kg/h Cgsbvoumubyoapgdet Currently, the system is used to process HDPE, but it is also suitable for other plastics such as LDPE. The system can be viewed during operation. A new extruder screw was installed in February.

Year of construction: 2018, Condition: like new (used), CNC machine for plastic 1 Milling motor 5 axis 6th axis: rotary indexing table: lathe 2 automatic tool change Z high working field: 500 mm. Table size: 2.000 x 1.000 mm Csbsp Aw D Hsvapgdsgt

Condition: new, Year of construction: 2025, Functionality: fully functional, power: 198 kW (269.20 HP), Plastic squeeze dryers / Agglomerators are a vital part of plastic film washing lines. Cebvjwg Sgcoapgdsgt Washed films retain up to 40% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer/Agglomerator is a must to dehydrate the washed film and increase the density of recycled film and fibre material. This also will increase the capacity of the extrusion process and further refine the quality of final plastic pellets. Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would be uneconomic to agglomerate on a conventional batch agglomerator. By redusing the moisture so significantly the productivity of the extruder and quality of pellets is increased exponentially. The latest development for drying and simultaneously agglomerating washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the resultant squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying where materials are still in lightweight flake form, and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids on entry to the dryer, to output dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders saving more energy, as the materials are so dry and dense they can be fed direct to extruders for pellet production. With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 212 h, General Data Machine weight 21500 kg Injection Unit Screw diameter 70 mm Shot weight 1172 g Injection pressure 1856 bar Clamping Unit Clamping force 350 T Size of mold platens 249 – 800 mm This Milacron Elektron Evo 350 was manufactured in 2017. A reliable electrical injection moulding machine, it offers efficient performance for your production needs. Consider the opportunity to buy this Milacron Elektron Evo 350 electrical injection moulding machine. Contact us for more information. Application Types Injection Moulding Cjbvov T D Ndjapgdogt

Condition: good (used), Year of construction: 1999, operating hours: 1,015 h, Functionality: fully functional, Thermovormmachine Adolf Illig SE 53 C 1015 hours Cgsbsvu Ditovapgdst Loading and dismantling is for the buyer.

Condition: like new (used), Year of construction: 2018, Basic Technical Specifications: • Type: Vertical injection molding machine • Clamping force: 1600 kN (160 t) • Screw diameter: 30 mm • Shot volume: 113 cm³ • Drive system: Hydraulic • Table diameter: approx. 1600 mm • Year of manufacture: 2018 • Operating hours: approx. 18,167 hrs Performance and Capacities: • Hydraulic system capacity: 250 l • Dosing stroke: 160 mm • Screw torque: 380 Nm • Injection flow rate: 111 cm³/s • Specific injection pressure: 2180 bar (increased: 2390 bar) • Nozzle stroke: 650 mm • Nozzle contact force: 48.9 kN Clamping System: • Opening stroke: 450 mm • Minimum mold height: 300 mm • Maximum plate distance: 750 mm • Clamping plate dimensions: 1330 x 500 mm • Maximum total tool weight: 2600 kg • Ejector stroke: 105 mm Cobvaeu Ekltopgdogt • Ejector force: 35 kN Tool Weight Capacities: • On moving clamping plate: max. 1100 kg • On stationary plate: max. 1500 kg

Condition: good (used), Plastic injection molding machine : Brand: BMB Type: KW650/3500 650 tons Year: 1999 Weight: 32500kg Power : 128 kW Distance between H-V columns: 860x760mm Min-max mold thickness: 250-900mm Movable platen stroke: 1000mm Coboik H Enevapgdsgt Recent parts installed on the press: 04/2020: hydraulic safety valve on mold-holding platen: €1414 07/2021 : Hydraulic pump + coupling : 4666.74€ HT 07/2022 : More than 5000€ spent on electronic cards Optional robot: €7,000 Brand : Sepro Type : SR 4030 S3 Year : 01-08-2006

Condition: excellent (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 3.04-00054, Equipment: type plate available, Used Bellaform extruder BH45-30D with barrier screw and mixing section. 45mm extruder with 30L/D screw length The extruder is equipped with a new control system function-tested Several extruders of the same type available ! Csbvjuxa Abjapgdsgt

Condition: new, Functionality: fully functional, power: 90 kW (122.37 HP), Year of construction: 2025, Plastic squeeze dryers are a vital part of plastic film washing lines. Cgjbvewg Sd Uoapgdot Washed films retain up to 30% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer is a must to dehydrate the washed film, increase the density of recycled film and fibre materials, increase the capcity of the following extrusion process and further refine the quality of final plastic pellets. Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would significantly reduce the productivity of the extruder and quality of pellets. The latest development for drying and recycling washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying , and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids to dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders, as the materials are so dry and dense they can be fed direct to extruders for pellet production.With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Year of construction: 1992, Condition: ready for operation (used), An injection molding machine with two units Klöckner Ferromatik Desma GmbH, Windsor plant Maintal is available. Stroke volume: 2x30150cm³, clamping force: 40000kN, injection pressure: 1800bar, cooling water requirement: 2x18.1m³/h, total power requirement: 2x700kW. Weight clamping unit: 2x175t, weight injection unit: 2x50t, total system weight: 450t. On-site inspection is possible. Cgobvaev T Aqaspgdet

Condition: excellent (used), Bystronic Type: ERMM180 Thermoplastic applicator Field of application The thermoplastic applicator applies a thermoplastic material to rectangular glass panes rectangular glass panes as part of a production line for solar modules. The plastic forms a seal to a second pane of glass, which is applied in a later step. applied in a later work step. The panes are fed, applied and removed on horizontally running belts/belt conveyors. belts/conveyors. The thermoplastic applicator is a highly technical machine that has to fulfill many requirements with great precision. For this reason, you should only use products (glass, sealant) that meet the specifications on the following pages. the following pages. This helps to achieve high-quality and safe production. production. Performance and connected loads Maximum transport speed: 18 m/min Height of the glass running surface: 1100 mm Height of the applied sealant line: 0.5 to 1.2 mm Maximum width of the applied sealant line: 12.0 mm Required constant pneumatic inlet pressure: 6.5 to 8.0 bar Pneumatic operating pressure: 6.0 bar Compressed air consumption in normal operation: 10 standard liters/min Compressed air consumption when changing barrels: 500 standard liters/min Average energy consumption per hour: 10 kWh Working temperature of the sealant: 110°C to 130°C Ambient conditions and emissions Minimum ambient temperature: +15°C Maximum ambient temperature: +35°C Maximum relative humidity:: 75% Noise level: less than 70 dB (A) Requirements for the drums for the sealant Design: Material lidded container D18 according to DIN 6644 - with base (F1) and smooth outer surface (jacket design, smooth). Capacity: 216 liters Inner diameter: 571.5 mm Height: 874 mm Minimum wall thickness: 1.25 mm Machinable glass panes Types of glass Glass panes with a smooth surface can be processed (float glass). Dimensions and weights Smallest dimensions Largest dimensions Geometry 1198 mm 1200 mm Length LS 498 mm 600 mm Width BS 1.8* mm 5.0* mm Thickness DS Thermoplastics based on poly-iso-butylene (butyl) can be processed. The plastic must be flowable in the range of approx. 110°C to 130°C and have a defined viscosity curve. viscosity curve. Only use materials that have proven themselves in practice and that have been approved by the manufacturers of these materials and by Bystronic. by the manufacturers of these materials and by Bystronic for your intended use. intended use. For detailed product descriptions and information on handling, storage and disposal of the plastic disposal of the plastic used can be found in the information sheets and safety data sheets provided by the manufacturers of the plastics. Dimensions of gantry robot with glass conveyor Height x width x depth: 2800 x 1890 x 2735 mm Weight of the gantry robot: 850 kg Weight of the glass conveyor: 1400 kg Drum pump dimensions Height x width x depth: 3320 x 1060 x 1200 mm Weight (without drum): 850 kg Weight (with drum): 1100 kg Height H for drum pump FP1: 4400 mm Height H for drum pump FP2: 4000 mm Control cabinet dimensions Height x width x depth: 2200 x 1800 x 600 mm Cgsbod N Erpovapgdot Weight: 450 kg The applicator was used with the material butyl. Condition: second-hand / used From test laboratory, as good as new condition, only a few operating hours for testing! Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2020, Condition: new, Krauss Maffei Touch panel the newest version for MC5/ MC6 Spare parts width- 37 cm height-47cm length-8cm Cebvaoqvuicspgdegt

Condition: refurbished (used), Krauss Maffei injection molding machine Cgebvapgordg Tpedet 25 tons Year: 2000 IPC not working (see map)

Condition: used, Year of construction: 2013, GRANULATOR, KNIVES MILL CMG S3050A rotor diameter: 305mm rotor length: 500mm main engine: 9kW complete with blower and big bag station Csbvapgsway Sasdsgt

Year of construction: 2025, Condition: new, Complete plastics recycling line for films and fibre materials from Taiwan leading Plastics Recycling Machinery manufacturer. GENIUS Machinery Co who have more than 30 years of recycling extruder production and experience. Extruder can be fed without size reduction or shredding.. Materials in baled, loose or reel form can be fed. Line can be supplied complete with Belt conveyor, Cutter compactor, Main extruder, Filtration system, (variety of types to suit requirements), Hot pellet die-face cutting device, Centrifugal pellet dryer, Vibrating screener, Storage silo for pellets. Additional ancillary equipment can be supplied . A two stage " Cascade" version is also available for heavily printed films, or very dirty films requiring double filtration. Alternative sizes from 100 kgs per hr up to 1200 kgs per hr can be offered. Full sales and support and training is available in UK and Europe for these extremely modern and economic machines. Cgjbswg R Rtjvapgdst

Condition: ready for operation (used), Year of construction: 2001, A complete 5-layer coextrusion blown film line with 5 extruders and all peripheral equipment is available. Total line dimensions X/Y/Z: 14m/22m/11m, blow head: Kiefel Worms FSBK 500 with IBC, die diameter: 500mm, film width range: 700mm-2000mm, haul-off width: 2000mm, winding width: 2000mm, line speed: 120m/min, melting capacity: 500kg/h, total power requirement: approx. 300kW. 1) Double winder Wintech, winding width: 2000mm, film thickness range: 35µm-150µm, max. roll diameter: 1000mm, max. roll weight: 1900kg, core inner diameter: 152mm/6inch. 2) Extruder Kiefel Worms 70.29D, power: 89kW, screw: 5-zone barrier screw, speed: 125rpm, renewed: 2010. 3) Adhesive extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 4) Center extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone core progressive screw, speed: 175rpm. 5) Adhesion promoting extruder Kiefel Worms 50.25D for the outer layer, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 6) Kiefel Worms 80.25D outer layer extruder, power: 125kW, screw: 5-zone barrier screw, speed: 150rpm. 7) Reinhold SRK 200/9.6 film calibrating device. The entire line is controlled by a Plast Control system. Further components: integrated width measurement, C-scan for profile measurement, web center control, corona pre-treatment, film pre-draw. Including a replacement FSBK 5-layer blow head with IBC, replacement rollers, annular gap blower with filter, suction units, crane and external system terminal. Documentation available. On-site inspection is possible. Cgjbvaov T An Sopgdot

Condition: excellent (used), Eos EOSINT plastic laser-sintering system Here we offer an Eos EOSINT plastic laser-sintering system. Cgobvapsf Ey Eaegdot Eos EOSINT Plastic Laser-Sintering-System P385 The EOS P385 system includes the following Installation space container Powder container Cooler: Termo TEK Termochiller 1100 The following upgrade has already been performed : Software: CD's Eosint P3 process software PSW 3.2 for Windows 2000, XP Materialice: Magics RP 9.0 Machine upgrade from P360 to P385 on 10.08.2007 Laser change 15.05.2008 X Drive Motor. Change of used engine 04.05.2020 Pyrometer change 30.06.2020 350mm x 350mm x 610mm Voltage 3/N/PE/ 400V A, frequency 50 Hz Connected load 8 kW Fuse 32 A MAX. Laser power 100 W Laser class open 4 Laser class Closed 1 Weight 850 kg Type: EOSINT Upgrade P385 condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We can answer further questions for you on the phone.

Condition: excellent (used), Year of construction: 2007, Clamping force: 80 t Screw diameter: 28 mm Injection volume: 86 cm3 Tie bar distance: 360x360mm Csbvapevclwnsgdegt Platen size: 570x570 mm Mould min-max: 140-350mm Working hours: 43 000 h

Year of construction: 1996, Condition: ready for operation (used), Three Ferromatik Milacron injection molding machines are available. Output: 1x15kW/2x37kW, power consumption: approx. 136A, machine weight: approx. 38000kg. On-site inspection is possible. Cgobvaev T Ap Nopgdet

Condition: good (used), Autotherm Type: Temperature control unit Autotherm AW 95-12/VK/E Temperature control unit Autotherm AW95-12_VK for water / glycol temperature control (refurbished) Autotherm AW temperature control unit: For high-precision temperature control of water Temperature control units from autotherm are used in various areas of industry, research and laboratory applications. Temperature control units supply, for example, tools, open baths, double-walled containers, heat exchangers and heating chambers with tempered water, to keep them at the desired temperature with high precision. Areas of application: Mechanical engineering, e.g. solar and wind power industry, textile industry Plastics processing Chemicals and pharmaceuticals paper production medical technology Food industry Research and development Temperature control unit Autotherm AKW AW95-12/VK Temperature range RT°C / +95°C Heating capacity 12.0 KW Cooling capacity 18.0 KW Passive cooling system via heat exchanger / connection to cooling water network required Nominal output 14.5 KW Dimensions 600mm x 840 mm x 910mm Csbvsuigrzjapgdegt Power consumption: 400Volt/ 50 Hz 13400 Watt 19,6 A 5,1 bar Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2019, Condition: excellent (used), \- functional, worked until 08/2022, therefore selling - 90°C, cooling capacity 64 kW/ heating capacity 24 kW - THW124-F, 180 l/min.; 3,5 bar - 120 kg weight Cobveuykn Deapgdogt

Condition: excellent (used), Fill 3D Ultrasound Cutter Here we offer a Fill 3D ultrasound cutting system. Fill 3D-ultrasonic cutter 3D-ULTRASONIC CUTTER The 3D ultrasonic cutter from Fill enables three-dimensional contour cutting of fibre-reinforced plastics by means of ultrasonic excited cutting systems. Your advantages: Cobvapsf Tph Iegdegt Ergonomic loading and unloading Easy creation of trimming programs (NC control) Space-saving system concept (alternative to robot) High repeatability High process stability Simple and fast tool change Possible integration into an overall process chain The principle: The linear axis gantry enables precise guidance of the ultrasonic knife with low space requirements and simple kinematics. The Siemens CNC control 840 D allows the trimming device to be programmed like a machine tool. Tool corrections or path changes can easily be made directly on the machine. The machine is equipped with a 20 kHz ultrasonic cutting unit as standard. However, it can also be equipped with alternative systems. The cutter is equipped with a separate rotary axis, in order to be able to cut tight radii and save other axis movements (5 + 1 axes). Technical data: Machine data component length max. 1.000 mm component width max. 900 mm component height max. 400 mm path repeat accuracy +- 0,1 mm positioning accuracy +- 0,2 mm Load capacity approx. 30 kg E-control Siemens Sinumerik 840D

Year of construction: 2012, Condition: used, 10 kVA weight 142 kg, Csbvjt Ul D Ieapgdsgt L x W x H: 160 cm x 80 cm x 110 cm on pallete

Condition: excellent (used), Year of construction: 2007, 570C 2000 - 800 Clamping force: 200 t Screw diameter: 50 mm Drive: Hydraulic (2007) Arburg ARBURG 570C 2000-800 Golden edition Clamping/injection matrix Clamping force [kN] 2000 Mounting plate dimensions (hxv) [mm] 795 x 795 Clearance between columns (hxv) [mm] 570 x 570 Injection unit Cgobov Avc Uovapgdst Screw diameter [mm] 50 Injection volume [cm3] 392 Shot weight [g] 356 Injection pressure [bar] 2000 Electro-hydraulic equipment Power rating of the pump motor [kW] 30 Power rating of barrel heating [kW] 14,9 Dimensions and weight (approximately) Net weight with control cabinet [t] 7,9 Dimensions (L x W x H) [m] 5.53x1.79x2.20 Hydraulic system with 2 control pumps Connection for air blow unit 1 Core pull movable platen 4 free cooling circuids manually adjustable Selogica touchscreen.