Bellaform Extruder Typ: BH45-30D

Bellaform BH45-30D

Year of construction: 2000, condition: used, Rotational speed: 227/min, power: 31kW, heating output: 7.8kW, length: 1952mm, width: 840mm, height: 1920mm, weight: 820kg. Cpodpfx Afoduyyzjnou

Condition: used, Year of construction: 2001, inner diameter: 450 mm, wall thickness: 11 mm, overall weight: 3,200 kg, System: Decanter / centrifuge, used Manufacturer: Hiller Model: DP45-422 Mach. No.: 2818 Year of manufacture: 2001 Maximum drum speed: 3800 l/min Drum inner diameter: approx. 450 mm Cpjdpjvz A Uzofx Afnju Drum wall thickness: 11.0 Drum material: H2/ST52 Weight: approx. 3200 kg Permissible density 1.50 kg/dm3

Year of construction: 2024, operating hours: 10 h, condition: like new (used), Extrusion Line with Densifier – Ideal for Recycling Applications This robust and versatile extrusion line is perfectly suited for recycling polyolefins such as LDPE, HDPE, and PP. Thanks to the integrated densifier, even materials with low bulk density – such as regrind, EPS, film scraps, and other lightweight plastic waste – can be processed efficiently. The densifier compacts the loose material and feeds it directly into the extruder, ensuring a consistent material flow and stable extrusion process even with challenging input materials. Key Features: • Suitable for all types of polyolefins • Ideal for lightweight, bulky materials like EPS or film regrind • Efficient feeding system via integrated densifier • Compact design and easy maintenance Csdpfx Afetziudsnjpu This line is an excellent choice for recyclers, plastic processors, and compounders who require flexibility and reliable performance when working with diverse input materials.

Condition: used, Year of construction: 1977, pressure 250 t stroke 40 - 190 mm no. of strokes 40 /min throat 500 mm passage to the back 1050 mm dayligth 615 mm table surface area 1380 x 880 mm hole in the table 450 mm Csdpfxjvuuaio Afnspu table height over floor 800 mm ram surface 1200 x 800 mm ram adjustment 125 mm power requirement 22,0 kW Weight 24,0 t dimensions of the machine ca. 2,0 x 2,5 x 3,95 m x m x m permitted for manual loading according to the German Safety Regulations (UVV) with motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, manual stroke adjustment, motoric centralized lubrication, bolster plate, two-hand operation

Condition: good (used), Complete AMMANN asphalt mixing plant. The ERMIIS automation was installed in 2013, replacing the original AMMANN automation. Capacity: 160 tons/hour. The plant is operational until January 2026. Codpsxqpvtofx Afnopu

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 0509, 🔧 Key Features Continuous Operation: Designed for uninterrupted processing, ensuring efficient separation of solids and liquids. Csdjwnx Ngspfx Afnopu High Separation Efficiency: Capable of achieving significant separation of solids, oil, and water, with capacities up to 30 m³/h, depending on the model. Robust Construction: Built with durable materials, such as 304 stainless steel for product contact parts, ensuring longevity and resistance to corrosion. Advanced Control Systems: Equipped with PLC control panels featuring user-friendly interfaces for precise operation and monitoring.

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 1used, partly overhauled and functionally tested Cpsdpfxoiyx Uzs Afneu Single-screw extruder AlphaTec A-ES 75.28 Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed 3x addituional temperature controller for down-stream equipment Control board overhauled You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available

Condition: used, Year of construction: 2005, Material type: LDPE, LLDPE, mLLDPE, HDPE, PP, regranulate Machine dimensions (LxWxH): 16 X 5 X 10.5 m Min/Max final Film width: 900 / 1700 mm Film thickness: 27–200 µm Capacity: Up to 240 kg/h Line speed: 0–150 m/min Screw diameter: 55/65/55 Layer ratio: Up to 25/50/25 % L/D ratio: 30/1 Number of heating zones: 3 for 55 mm and 4 for 65 mm (1 zone per screen) Dosing system: Doteco Grado; 3 units with 4 components each; centralized vacuum pump (added later); all scales fully serviced last year; new software and external touch screen; neck (before extruder) with additional magnets Electronics: Siemens, ABB Software: Macchi’s; full control via touch screen (replaced 3–4 years ago) Die head with IBC: 280 mm; 2.4 mm gap (3 heating zones); TE502 model with air ring extension Internal cooling balloon diameter control (IBC) Ultrasonic sensor (1 unit); JET internal cooling system Air ring: Karat, with 3 air inlets, 45 segments (valves), with integrated thickness control Air ring blower: YES Thermoregulation chiller: YES (Eurochiller) Bubble cage: YES; rollers with silicone cover; motorized electronic control; secondary cage with motorized open/close and adjustment Cjdpfx Asw Nhavsfnjpu Thickness control: K design (Karat, Kundig K-150); contact system integrated with air ring Collapsing frame: Free aluminum rollers Rotation: Nip roller 1800 mm (max film width 1700 mm); motorized open/close; speed control motor; other free rollers in aluminum; 2 ceramic air rollers for cooling Water-cooled rollers after nip roller: / Film centering: 2 ultrasonic sensors (Five) Corona treatment (double-sided): YES (F&B); above winders; 8 kW generator; ozone extractor and film detector; 10 mm electrode width Winders: Back-to-bac Winder model: Model BO; nip roller 1800 mm (max film width 1700 mm); manual shaft placement; max roll diameter 1000 mm; trim and multiple output rolls; film tension and winding control; 2 banana rollers; ‘flying knife’ (new Origa knife installed a few years ago); electric panel included Shafts: 4 x 76 mm and 4 x 152 mm Trim suction: YES; includes Supergrillo regranulation system Frame construction: YES Installed power: Approx. 150–200 kW (400 V, 3-phase

Year of construction: 2011, condition: good (used), - Incl. extruder, corrugator, cutting saw, sliding saw, table, molds and die head / set Cjdpfsua E H Ssx Afnspu - Suitable for single wall pipes up to 220mm

Year of construction: 2003, condition: reconditioned (used), Stock - No. 2651 1 used underwater pelletizing unit, partially overhauled in 2023 Throughput up to approx. 450 kg/h depending on the material, consisting of: Type BKG ( Nordson ) Start-up valve with hydraulic station Granulator type A300 including die-plate and cutter bar, drive 4.4 kW by-pass system TVE 1000 ED pellet-dryer drive 4 kW incl. Agglomerate catcher Tempered water system with Codjiyyf Iopfx Afnjpu Water box 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15³/h heat exchanger Control unit - NEW Further UWP pelletizing units are available ex workshop in Wuppertal-Germany ( as Gala, BKG Nordson, Econ ) Available from the Wuppertal warehouse: complete compounding, pelletizing extrusion lines, with single-screw or twin-screw extruder.