Condition: excellent (used), Year of construction: 2000, Demag Ergotech 350-115 viva Closing 35 tons Scrow 25mm Pls sprue picker Ceb Hlqhswgdhlo Nsgt

Condition: like new (used), Year of construction: 2022, Engel duo 17060/2000 injection molding machine Year of production -2022 Robot viper 60 - RC300 integrated Z= 4280 mm X= 1800 mm Y= 2600 mm B9Wbl2Xapk Injection system Screw diameter mm 135 Screw pitch mm 610 Maximum injection capacity cm³ 8731 Screw speed min⁻¹ 125 Screw torque Nm 14000 Maximum screw speed at reduced torque min⁻¹ 135 Reduced torque at max. speed Nm 12963 Reduced screw speed at max. torque min⁻¹ 112 Maximum screw torque at reduced speed Nm 15630 Regeneration efficiency (3-zone screw) g/s 222.9 Regeneration efficiency (barrier screw) g/s 279.2 Injection Injection efficiency cm³/s 1904 Injection volume cm3 8731 Injection weight g 7860 Injection pressure (regeneration) bar 1648 Injection pressure (maximum) bar 2000 Nozzle Nozzle stroke mm 1100 Nozzle pressure force kN 210 Material cylinder L/D ratio - 25 Heating zones (including nozzle) - 8 Heating power kWel 88.5 Closing system Closing force kN 20000 Minimum closing force kN 2000 Opening force (with pressure cushion) kN 1600 Force opening kN 614 Opening stroke mm 3000 Max. distance between platens mm 3800 Min. mould height mm 800 Max. mould height mm 1800 Spacing between tie bars (h x v) mm x mm 2000 x 1600 Size of mould plates (h x v) mm x mm 2700 x 2430 Max. mould weight (moving platen) kg 41330 Max. mould weight (stationary platen) kg 41330 Max. total mould weight kg 62000 Dry cycle stroke (Euromap 6) mm 1400 Dry cycle time (Euromap 6) s 5.5 Ejector Ejector stroke mm 400 Cgjbewc A T Se Hlqh Net Ejector force kN 385 Drive Installed power of main motors kW 265 Capacity oil tank (injection unit) l 1600 Oil filter Max. cooling capacity (at 25°C) kWcool 43.2 Water consumption (at 25°C) m³/h 6.3

Condition: good (used), Functionality: fully functional, 1. Manufacturer: Bosch Type: 0811404666 + 1817414313 Cob Hlqsv Up Tqoh Nogt Price: 1200 EUR 2. Manufacturer: Bosch Type: 0811402114 Price: 1000 EUR 3. Manufacturer: Rexroth Type: 0811402114 5WRPE 10 F1B 70L Price: 1000 EUR 4. Safety valve Manufacturer: Mannesmann Rexroth Type: LS 1171 X 168-20/CG24K4 Price: 300 EUR

Condition: ready for operation (used), Year of construction: 2005, operating hours: 49,412 h, Functionality: fully functional, machine/vehicle number: 90962, clamping force: 8,000 kN, screw diameter: 100 mm, clearance between the columns: 1,120 mm, displacement volume: 5,700 cm³, plate width: 1,620 mm, plate height: 1,530 mm, Equipment: documentation/manual, including protective fence and conveyor belt Cgob Hlewbpq Ijqh Net

Condition: like new (used), Year of construction: 2007, Arburg 470C 1500-800 Year of construction 06/2007 Control Selogica Cgobsv Sd Tas Hlqh Njt Operating hours: approx. 60,000h (pump) Screw diameter 70 mm Fuel weight: approx. /gr./hp Distance between tie bars 470 x 470mm Extras: Core pull Paint dispenser interface Handling interface Machine weight: 5500kg incl. Arburg Multilift Year of construction 2007 X-200mm Z-1000mm

Condition: excellent (used), Year of construction: 2012, operating hours: 34,000 h, clamping force: 800 kN, screw diameter: 45 mm, clearance between the columns: 420 mm, displacement volume: 318 cm³, injection pressure: 2,336 bar, plate width: 670 mm, plate height: 670 mm, overall weight: 3,900 kg, Equipment: documentation/manual, KRAUSS MAFFEI KM 80-750 CX warehouse no.: 503569 manufacturer: KRAUSS MAFFEI type: KM 80-750 CX controller: MC6 year of construction: 2012 operation hours: 34000 h technical data clamping unit clamping force: 800 kN distance between tie-bars h x v: 420 x 420 mm Ceb Hlqsv D H Ansh Njgt size of mould plates h x v: 670 x 670 mm min. mould height: 250 mm max. mould height: 500 mm max. open daylight: 750 mm opening stroke: 500 mm ejector stroke: 150 mm ejector force: 23 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm weight of mould: 1000 kg technical data injection unit screw diameter: 45 mm swept volume: 318 ccm injection pressure: 2336 bar screw length: 22 l/d screw speed: 355 min injection rate into the open: 143 g/s PS number of heating zones: 5 measures & weight measures of machine l x w x h: 4.5m x 1.5m x 2m total weight: 3900KG equipment included screen text german core pulling hydraulically 1x machine incl. Handling machine without belt conveyor machine without hopper loader Anti vibration mounts technical data robot-system handling type: integrierter Linearroboter manufacture: Krauss Maffei controller: LRX 100 year of construction: 2012 handling weight: 10 kg operation hours: 3400 h X axis: 550 mm Y axis: 1200 mm Z axis: 1500 mm screen-text: deutsch

Condition: excellent (used), Year of construction: 1993, Demag Ergotech 200-50 Compact Closing 50 tons Cobswgdd To Hlqh Nsgt Scrow 30mm Hole spacing 35.5x35.5

Condition: like new (used), Year of construction: 2019, FANUC ROBOSHOT S100iA FANUC ROBOSHOT ALPHA S100IA Operating hours: 10,839 hours Year of manufacture: 2019 Cgob Hlowcx Rtsqh Nst 100 tons Tiebar spacing: 460 x 410 mm Installation height: 520-220 mm 40 mm 3-zone screw Injection speed: 330 mm/s Injection stroke: 144 mm Ejector stroke: 120 mm

Year of construction: 2021, Condition: used, Various years of construction: Glazing press Rotox welding and polishing line Work tables Profile trolleys Cgjb Hljv Nzcmsqh Nst Small frame trolleys Large frame trolleys Frame buffer racks 30 compartments Wing buffer racks 120 compartments Door buffer racks 8 compartments Glass buffer racks 200 compartments Material compartment trolleys Fittings rack Copy milling machine Slot milling machine Steel saw Frame transport trestles Glass transport trestles HVL milling machines for straight frame corner connections

Condition: used, Year: 2014 Type of inspection: NC5 Number of hours: 39,660 Storage location: MECA PLASTIC Deadline: AVAILABLE Closing force: 420 tons Opening stroke: 770 mm Between columns: 820 x 820 mm Plate dimensions: 1200 x 1200 mm Minimum/maximum mold: 350/1020 mm Maximum gap between plates: 1790 mm Screw diameter: 60 mm Screw length: 25T cm3: 763 Bars: 2106 Motor power: 135 kW Cob Hev I Uz Hjlqh Nogt Heating power: 27.9 kW Closing weight: Injection weight: 24 tonnes Length dimensions: 8 m Width dimensions: 2.2 m Height dimensions : 2.70 m Robot interface: YES Bi-metal: YES Other: 2 BLOW GUNS, 3 batteries on injection, 16 hot runners, pneumatic shutter nozzle, 3 programmable inputs, mixer/mixer tip screw

Year of construction: 2001, Condition: good (used), For sale complete clamping unit for Krauss-Maffei KM 350 with fix platen, moving platen, tie-bars, etc.. This unit is complete checked by us. Cjboihppfs Hlqh Nogt

Condition: used, Functionality: fully functional, The hot runner device is for sale, it has 5 heating zones Cgjb Hlovxz Nfjqh Net

Condition: good (used), Year of construction: 1998, Tempering unit Mrke: Single Type:STW 1-6-25- ZN FY CA 1998 Csb Hlqhefcy Drj Njgt

Condition: good (used), Year of construction: 2011, VC 750H/330V/220 COMBI CC200 controll Clamping force: 220 t Screw diameter: 50 mm Csb Hlqhev I Ul Es Nsgt Screw dia 2: 35 mm Shot weight: 361 g Shot volume: 392 cm3 Type: Uni Drive: Hydraulic Possible to buy Wittmann 821 robot extra

Year of construction: 2007, Condition: used, “ROTOX” 4-point welding machine type SMK 504 Investment in 2018 as equipped with: • 4 pieces Welding units equipped with welding bead limitation up to 0.2 mm. • Welding units adapted for welding the HVL connection. • This makes the table side the outside profile. • Max. welding dimensions approx. 3300 x 4000 mm. • Min. welding dimensions approx. 400 x 400 mm. • Depending on profile width and technically required adjustments. • Max. profile height approx. 125 mm. • Max. profile width approx. 140 mm. • Electronic control and automatic positioning of the Cjb Hlqhov Nzbce Negt • welding units at the correct length and width dimensions. • Automatic outfeed transport. • Automatic outfeed transport track to the “ROTOX” Angle processing machine. “ROTOX” CNC Corner processing machine type EPA 479 Machine for fully automatic processing of welded corners. Investment in 2018 as equipped with: • Up to max. 8 tools can be mounted on the slide at the top as well as • on the slide at the bottom. • Pneumatic clamping device. • Coupling with 4-point welding machine. • Automatic transport and turning station. • Outside corner processing by means of CNC-controlled milling blade. • Very user-friendly control. • Max. size automatic turning is approx. 2500 x 2500 mm. and is • dependent on weight, profile and protective film.

Condition: used, Year of construction: 2012, operating hours: 36,000 h, Year: 2012 Type of inspection: MC5 Number of hours: 36,000 Storage location: MECA PLASTIC Deadline: AVAILABLE Closing force: 110 tons Opening stroke: 600 mm Between columns: 470 mm x 470 mm Plate dimensions: 745 mm x 770 mm Minimum/maximum mold: mm Maximum spacing between plates: 900 mm Screw diameter: 70 mm Screw length: 20T cm3: 393 Bars: 1898 Motor power: 22 kW Ceb Hlqhjv I Uyvs Negt Heating power: 15.62 kW Closing weight: 6.2 tons Length dimensions: 4.90 m Width dimensions: 1.60 m Height dimensions: 2.10 m Cores: 2 HYDRAULIC CORES Robot interface: YES Bi-metal: YES

Condition: reconditioned (used), Year of construction: 2000, Functionality: fully functional, 2000 Arburg projector. 130 tons of closing force. The machine is delivered completely reconditioned in our facilities in Heras (Cantabria). New gaskets in the sealing body. We can show it in operation. Technical details CLOSING POWER 1300 kN PLATE DIMENSIONS 660x840 Cgob Hlqhsrxtpdo Njt OPENING STROKE 575mm MAXIMUM DISTANCE BETWEEN PLATES 800/850 DISTANCE BETWEEN COLUMNS 420x420/470x470 SPINDLE 50mm INJECTION VOLUME 353cm3 INJECTION WEIGHT 117 YEAR OF MANUFACTURE 2000 INJECTION PRESSURE 2500bar

Year of construction: 2007, Condition: ready for operation (used), A Willems welding machine for plastics is available. Tables: 2, welding area: 500mm/400mm, pressing force: 20kN, frequency: 27.12MHz, generator output: 10kW, overhauled in 2007, documentation available. On-site inspection is possible. Cob Hswal H Nslqh Negt

Condition: excellent (used), Year of construction: 1991, Arburg 270M-500-210 Cgsb Hjwgc Epjlqh Njt Closing 50 tons Scrow 40 mm Injection softened 188 cm3

Condition: good (used), Year of construction: 2002, 1.0 pc. used drop-through die cutter Manufacturer: ILLIG Type: STAL 80 Year of manufacture: 2002 Working area: 1,000 x 510 mm Max. film width: 800 mm Drop-through opening: 800 x 390 mm Cob Hlqhov Npdlj Negt Lift height: 120 mm, 200 mm, and 240 mm Die installation height (infinitely adjustable) at a stroke height of 120 mm: 274 - 266 mm 200 mm: 274 - 266 mm 240 mm: 314 - 306 mm Die closed height at a stroke height of 120 mm: 273 mm 200 mm: 273 mm 240 mm: 313 mm Height adjustment of the installation height: 8 mm Punching force: 20,000 dN

Condition: used, Year of construction: 2011, operating hours: 39,000 h, Year: 2011 Control type: CC200 Number of hours: 39,000 Storage location: MECA PLASTIC Delivery time: AVAILABLE Closing force: 160 mm Opening stroke: 600 mm Between columns: 850 x 750 mm Plate dimensions: 850 x 750 mm Minimum/maximum mold: 300 mm Maximum gap between plates: 900 mm Screw diameter: 30/35 mm Screw length: 20T cm3: 113/192 Bars: 2400/2390 Motor power: 30 kW Heating power: 16 kW Closing weight: 9.5 tons Injection weight: Length dimensions: 5.8 m Width dimensions: 1.7M Height dimensions: 1.4M Cores: 5 Cgjb Hljv I Uxrjqh Nst Robot interface: Yes Bi-metal: Yes Other: 8 sequential, 12/1 24-zone hot runners, Viper robot, conveyor belt

Condition: excellent (used), Year of construction: 2002, Arburg 221K-350-100 Closing 35 tons Cjb Hlqswgc Dreh Njgt Year of manufacture 2002 Scrow 25mm Injection soaked 49 cm3

Condition: used, Year of construction: 2007, Functionality: fully functional, Complete thermoforming line: Manufacturer: ILLIG Type: RDM54K Year of construction: 2007 Technical specifications: Forming area: 500 x 300 mm Cgeb Hljv Nn U Nsqh Njt Max. molded parts: 160 mm Film width: 545 mm Consists of the following components: 1 Roller block 2 Preheating station, built in 2014 3 Punching unit 4 Cutting unit 5 Stacking unit 6 Mill for lead frames

Condition: used, Year of construction: 2019, Year: 2017 Control type: CC300 Number of hours: 20,000H Storage location: MECA PLASTIC Deadline: AVAILABLE Closing force: 160 T Opening stroke: 460 mm Between columns: 520 mm x 520 mm Plate dimensions: 760 mm x 760 mm Minimum/maximum mold: 250/600 mm Maximum spacing between plates: 1060 mm Screw diameter: 35 mm Screw length: 20T cm3: 154 Bars: 2000 Motor power: 21 kW Csb Hlov I Uw Ijqh Negt Heating power: 9.2 kW Closing weight: 8.4 T Length dimensions: 5.90 m Width dimensions: 1.70 m Height dimensions: 2.20 m Cores: NO Robot interface: YES Bi-metal: YES

Condition: used, Year of construction: 2017, operating hours: 19,500 h, Year: 2017 Type of inspection: SELOGICA Number of hours: 19,500 Storage location: FRANCE Deadline: MECA PLASTIC Closing force: 60 T Opening stroke: 300 mm Between columns: 370 x 370 mm Plate dimensions: 510 x 510 mm Minimum/maximum mold: 200/400 Maximum gap between plates: 700 mm Cgeb Hjv I Uvkjlqh Net Screw diameter: 30 mm Screw length: 20/D cm3: 85 Bars: 2000 Motor power: 19 kW Heating power: 9.4 kW Closing weight: 4 tons Injection weight: 77 grams Length dimensions: 3.5 m Width dimensions: 1.4 m Height dimensions: 1.8 m Cores: 0 Robot interface: yes Bi-metal: yes Other: 1 blower