2019 PIOVAN Tempering Unit THW124-F

PIOVAN THW124-F

Year of construction: 2020, condition: new, Touch control ROMER cabins are equipped with 4 "color touch displays. Operation of the cabin is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual Filter clogging sensor A sensor is installed in the cabins, which queues the filters for cleaning when they become clogged. The system also informs you when the filters have worn out Lrsdpfx Adjfzktzjtjg Automatic filter cleaning The electronic system for automatic filter cleaning has a range of cleaning frequency and shot time adjustment. Each of the filters is cleaned separately, the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore. Low volume Aluminum fans are very quiet, they work at the level of 74-79dB - It's not much. with the standard cabin structure, it's even hard to talk. Broaching machine through the cabin By dragging the suspension beams within the cabin, the cabin improves work efficiency, thus relieving the painter who no longer has to move them by hand. Explosion-proof design The booths are designed to prevent the formation of an explosive mixture during the painting process. Each of the components has been carefully selected to minimize this risk.

Condition: like new (used), Year of construction: 2021, ENGEL DUO 17060/2000 Injection Moulding Machine Year of manufacture: 2022 Integrated ENGEL Viper 60 Robot – RC300 TECHNICAL SPECIFICATIONS: Injection unit: Screw diameter: 135 mm Screw stroke: 610 mm Injection volume: 8,731 cm³ Shot weight (PS): 7,860 g Screw rotation speed: 125 rpm Screw torque: 14,000 Nm Max. screw torque (at reduced speed): 15,630 Nm Plasticizing rate (3-zone screw): 222.9 g/s Plasticizing rate (barrier screw): 279.2 g/s Injection rate: 1,904 cm³/s Regenerative injection pressure: 1,648 bar Maximum pressure: 2,000 bar Nozzle stroke: 1,100 mm Nozzle contact force: 210 kN Ljdpfx Aew Aw Tajdtjrg Barrel L/D ratio: 25 Number of heating zones (incl. nozzle): 8 Heating power: 88.5 kW Clamping unit: Clamping force: 20,000 kN Minimum clamping force: 2,000 kN Opening force with cushion: 1,600 kN Opening stroke: 3,000 mm Max. distance between platens: 3,800 mm Mould height: 800 – 1,800 mm Tie bar spacing (HxV): 2,000 x 1,600 mm Mould platen size (HxV): 2,700 x 2,430 mm Max. mould weight (moving/fixed): 2 x 41,330 kg Max. total mould weight: 62,000 kg Dry cycle stroke (Euromap 6): 1,400 mm Dry cycle time (Euromap 6): 5.5 s Ejector unit: Ejector stroke: 400 mm Ejector force: 385 kN Drive and cooling: Installed main drive power: 265 kW Oil tank capacity: 1,600 l Max. oil cooling capacity (at 25°C): 43.2 kW Cooling water consumption (at 25°C): 6.3 m³/h ENGEL Viper 60 Robot – RC300 (2022): Z-axis stroke: 4,280 mm X-axis stroke: 1,800 mm Y-axis stroke: 2,600 mm Robot fully integrated with the machine – operated via the machine control panel Machine is in excellent technical condition – latest generation ENGEL DUO with very low operating hours. Suitable for demanding large-scale production (e.g. automotive, household appliances, technical sectors). Machine is still powered, test possible. AVAILABLE IMMEDIATELY If interested, please contact us – we can provide more photos, operation video, technical documentation, and arrange a convenient date for a visit.

Condition: used, Year of construction: 1989, operating hours: 74,900 h, clamping force: 850 kN, screw diameter: 40 mm, overall weight: 3,700 kg, Machine no. 145464 Year of construction 1989 Machine weight 3700 kg (without oil filling) Clamping force 850kN Heating 8,31KW Lodpfx Ajr Hrqrsdtjrg Motor 18,5KW Total power 27,2KW Machine cycles 7,112,306 Operating hours 74,900h Interfaces: Master computer, handling, blow-out, selector switch, core pull 1 hydraulic, mold temperature control 3 pcs. The following accessories etc. are included with the machine: Complete 50 injection unit thermoplastic , Selecting diverter , Hydraulic infeed conveyor (height adjustable 3 levels) (integrated in control) , Diskette drive external (Arburg original) , Documentation and work reports from the machine by Arburg Service , Machine setting course CMD documents (folder) , E-plan , Documents also in digital form , Oil filling (must be pumped into a container before transport (pump is available)) , Electronic water battery

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 191523, clamping force: 490 kN, screw diameter: 30 mm, -KOM 3086- Offered here is a used injection molding machine. Lrodpfx Adov Tb U Dstsg Technical specifications: Manufacturer: Engel Model: Victory 50 Designation: VC 200/50 Tech Clamping force: 50 t Year of manufacture: 2013 Machine number: 191523 Screw diameter: 30 mm Tiebar spacing: Tiebarless Centering diameter: 125 mm

Year of construction: 2005, condition: ready for operation (used), There are two BOY 55M available, both year of construction 2005. Clamping force: 550kN, screw diameter: 38mm, stroke volume: 196cm³, injection pressure: 2000bar, platen dimensions: 565mm/540mm, tie bar distance: 360mm/335mm. Workpiece height min./max.: 250mm/650mm, opening stroke: 400mm, max. platen distance: 1050mm, ejector stroke: 80mm, max. mold weight: 600kg. Dimensions X/Y/Z: approx. 3300mm/1200mm/2100mm, weight: approx. 2300kg, operating hours: 29664h, control: Procan MD. Robot interface Euromap 12 included. Lrjdpfxetyaype Adteg

Year of construction: 2026, condition: new, machine/vehicle number: 1234, Designed to accumulate mash before the packaging operation. The accumulation option allows the entire line to run continuously without stopping, independently of the packaging machine. - Capacity: 600 L - Material: Wnr. 1.4301, AISI 304 Stainless steel - Weight: 60 kg - With floating lid - With level indicator Dimensions: Lsdsiu Hy Tjpfx Adterg D - diameter: 565 mm H - total height: 1095 mm h1 - tank height without legs: 845 mm h2 - height of legs: 250 mm

Condition: good (used), Year of construction: 2007, operating hours: 24,210 h, This Dr Boy injection moulding machine is in machine storage at Plastima Used Machinery. The machine is from 2007 and has relatively few working hours for its age. - Brand: Dr Boy - Model: 55M - Year of construction: 2007 - Screw diameter: 32mm - Shot volume: 96.5 cm³ Lodpfx Adjtpf N Uetjrg - Clamping force: 55T - Working hours: 24,210

Year of construction: 2014, condition: ready for operation (used), Max. output: 370kg/h, connected load: 0.25kW, length: 950mm, width: 950mm, height: 1115mm, weight: 75kg, including automatic filling, frame, valve, inspection shaft and documentation. Lsdpjh Akm Tefx Adtorg

Condition: used, Year of construction: 2019, Year: 2017 Control type: CC300 Number of hours: 20,000H Storage location: MECA PLASTIC Deadline: AVAILABLE Closing force: 160 T Opening stroke: 460 mm Between columns: 520 mm x 520 mm Plate dimensions: 760 mm x 760 mm Minimum/maximum mold: 250/600 mm Maximum spacing between plates: 1060 mm Screw diameter: 35 mm Screw length: 20T cm3: 154 Bars: 2000 Motor power: 21 kW Heating power: 9.2 kW Closing weight: 8.4 T Length dimensions: 5.90 m Width dimensions: 1.70 m Height dimensions: 2.20 m Cores: NO Lodpfx Adsv I Uw Istjrg Robot interface: YES Bi-metal: YES

Condition: excellent (used), Year of construction: 1999, Clamping force: 25 tons Distance between tie bars: 270x270 mm Opening max: 275mm Min Mould height: 200 mm Lrsdevl Skgjpfx Adtjg Mold platens size: 400 x 400 mm Screw diameter: 18 mm Injection volume: 20 cm3 Shot weight: 17 g Injection pressure: 2500 bar Working hours: 38.035 h