Used complete production lines for sale (23)

Condition: reconditioned (used), stock-No. 2452 1 used, partly overhauled and functionally tested pelletizing line capacity up to 300 kg/h depending material, equipped with: Kreyenborg Force-feeder SW 100, motor 7,5 kW Extruder BKG single-screw Ø 100 mm – 35 LD, motor 132 kW – AC Screw speed up 143 r.p.m. Gedpfx Afei Dtb Uocjua screw depth 14 mm heating power installed 35 kW 1x athm. venting port with „Stuffer“ * Kreyenborg K-SWE 160 RS screen-pack-changer back-flush self-cleaning with filter surface 244 cm² BKG underwater pelletizing unit AH 300, complete with : diverter-valve , hydraulic unit pelletizer, motor 4 kW incl. die-plate and knife-holder Water pump 2,2 kW By-Pass System, Process water tank heating power 9 kW Heat-exchanger BKG pellet spin-dryer TWE 300 with motor 3 kW control-board and operation panel OPTIONAL against additional price ᐳ * Vacuum pump ᐳ pellet classifier sieve, conveying, Big-Bag Station ᐳ chiller – cooling unit More pelletizing lines ex workhop Wuppertal-Germany available, ask for our most recent machine-stock-list or visit us, you´re welcome.

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, Stock No. 2846 Demonstration line, Compounding Extruder Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, intermeshing screw design Cylinder water/medium cooled/temperature-controlled Gujdpfsi Dtb Ajx Afcsa Throughput up to 1200 kg/h - material-dependent Drive 250 kW - AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders type ZS-B Siemens Touch HMI control OPTIONAL: > Melt filter/screen changer > pelletizing systems: ST strand, WRG water ring, or UWG underwater pelletizing > Screw configuration according to your requirements > Material dosing/blending : volumetric or gravimetric > Additional accessories Visit us at our Wuppertal plant. The system is ready for demonstration, test run date with your material after arrangement

Condition: used, Stretch blow molding machine from Etek ISBM Line = Injection Stretch Blow Molding Stretch blow molding machine for single-use PET bottles from PET preform blanks Stretch blow molding machine for rotary index production Gedpfx Afjkucxljcsua Manufacturer: ETEK / GF-Industries Type Supra 800 sv 1 Serial number: 22000225 Year of manufacture: 2012 Power: 90 kW Mains connection: 400 Volt, 50 Hz Net weight approx. 6000 kg As new condition

Year of construction: 2019, condition: ready for operation (used), A complete Respecta epoxy resin metering and casting system is available. 1) Big bag station for supplying fillers, max. particle size: 0.7mm, max. bulk density: 0.5g/cm³. 2) Two IBC connections for liquid components A and B with diaphragm pumps. 3) Two buffer tanks for A and B, volume: approx. 230l. Including level sensors and automatic IBC filling. 4) Volumetric metering to the mixing screw with flow meter and pressure monitoring. 5) Degassing unit. 6) Continuous epoxy resin inline heater with process monitoring of the resin temperature and the epoxy hardener, viscosity range: approx. 350-450mPas, max. epoxy resin temperature: 20°C. 7) Semi-automatic flushing and cleaning unit for the casting unit, volume: approx. 50l. Overall system control: Siemens Simatic S7, additional controls: control cabinets/frequency converters/industrial PC, overall system casting capacity: approx. 30l/min. The system allows mechanical preparation for retrofitting up to 3 additional filler metering systems. It is recommended to renew the lines and the diaphragm pumps before commissioning. Documentation available. An on-site inspection is possible. Godpfx Asyt N A Hjfceua

Year of construction: 2019, condition: like new (used), functionality: fully functional, For sale: Schtec SMC3500 machining center. Like new, very little used, in excellent condition, complete with all accessories. Package offer: If purchased together with the WM740 welding line and the Pressta double-head screwdriver listed in our other advertisements, the total price is 180,000 EUR. For more information, please feel free to contact us! Gedpfoyzihtox Afceua

Year of construction: 2017, condition: like new (used), Production line for manufacturing NESPRESSO coffee capsules Comprising the following components: Item 01) Injection molding tools for the capsule, Manufacturer: FOSTAG AG Gsdpfx Aow Nriusfceua 1 pc. mold with 16 cavities 1 pc. mold with 32 cavities Item 02) Two-component injection molding machine, Manufacturer: ARBURG, Model: 720A3200-800, Year of manufacture: 2017 The capsules are produced as free-falling parts.

Condition: used, functionality: fully functional, machine/vehicle number: 421, input voltage: 230 V, type of input current: three-phase, input frequency: 50 Hz, Transparent Box machine. Production of vinyl lids in Pvc. Solvent glue Max size: 405x280x12,7 mm/405x203x76 mm Min size: 76x25x10 mm Material thickness: 0,12 - 0,25 mm Guedpfx Afjyizg Necsa Sold together with Perondi Corner cutter modell 2T 700M, serial no 84 Cuts 2 corners simultaneously Rotating cutting heads

Condition: excellent (used), Year of construction: 2013, Cutting line: ERLENBACH mod.ESA 5 (used for less than a month). Year of manufacture: 2013 Packing machine, model PPZA-1300/6 (used for less than a month). Year of manufacture: 2011 - For blocks max. L x B x H: 5100 x 1260 x 1260 mm - Horizontal cut: max. 61 oscillating wires - Vertical cut: max. 11 wires - Cutting speed: 1,5 m/min. Gedpfxjv Hm A Ts Afcjua - Automatic wire setting - Waste grinding (bottom, top, side)

Condition: ready for operation (used), functionality: fully functional, operating hours: 9,743 h, Complete pipe extrusion line for Double wall corrugated pipes – 150mm to 350m Material Dryer and loader– M+H Equipment, Germany Duo Extruder combination – Battenfeld 90/75 – Type PEX-1-75-30B Germany Special die head – DWP 270 – UC500 From 90mm ID to 270mm OD Special die head – DWP 630 – UC500 From 160mm ID to 500mm OD Unicor - Germany Corrugator – UC 500/40 Made in Germany Gujdpjvztb Ssfx Afcsa Extrusion die and set of forming blocks – 1 set for DWC pipe ID 150mm, 200mm, 250mm, 300mm & 350mm Unicore - Germany Cooling Spray Bath – UCSB 500 Machine No Unicore, Germany Planetary Saw – SICA, Model – TRK/D/SY 10-500 Tube Deposit Unit -500

Condition: ready for operation (used), Year of construction: 2001, Ø 710-1000mm range PVC pipe production line. Gujdpjvzqy Sjfx Afcsa

Year of construction: 2011, condition: good (used), - Incl. extruder, corrugator, cutting saw, sliding saw, table, molds and die head / set - Suitable for single wall pipes up to 220mm Gedpfxjua E H Se Afceua

Year of construction: 1993, condition: used, functionality: fully functional, OMIPA CO-EXTRUDER CAST LINE 5 LAYERS Complete line for the production of 5 layers cast film Material PET-C, PET-PP Material width 1550 mm Material thickness 0,2 / 0,8 mm Output max. 650 kg/h Nº4 Extruders with screw diameter 120mm / 90mm / 60mm / 45mm Co-extrusion block 5 layers: BA, BAAAB, ACDCB Flat extrusion die-head Nº5 Rolls calender with diameter 412 mm and width 1800 mm Cristallyzer GC/1200 L Dehumidifier SMC 1200 Gravimetric dosing system Godpjypkfbefx Afcjua Edge trim cuttin system Year 1993

Condition: ready for operation (used), functionality: fully functional, Fully equipped plastic processing line, including: - Main extruder: BA92 NOVEL - Co-extruder: ROYAL MACHINE, model 253-070-000, mounted on a support column. The line consists of several components. - Suitable for co-extrusion applications – e.g., multi-layer profiles, strips, technical components TECHNICAL DATA – BA92 Extruder (NOVEL) - Screw: Ø92 mm, length 24 L/D - Type: B60S4; VB92-24-005 - Speed range: 3.3 ÷ 33 rpm - Barrel: 34CrAlNi7 steel, hardness 1000 HV - Gearbox: ratio 1:63.4 R - Thrust bearing: 1,170,000 N - Heating zones: 6 - Cooling zones: 4 - Motor: 63.8 kW, DC, 210–2100 rpm Guodpfxjyc R U As Afcsa - Venting: 2.2 kW pump, 36 m³/h, vacuum 700 Hg - Feeder: 1.2 kW DC motor TECHNICAL DATA – ROYAL MACHINE Co-extruder - Screw: Ø1¾", length 21D, compression ratio 2:1, twin-flighted - Barrel material: AISI 4140 steel (bimetallic barrel 2” O.D. x 1¼” I.D.) - Gearbox: ROSSI RCI 80 U03A, ratio 1:16.4 + belt 1:1.65 (total ratio 1:27) - Drive belt: type 3VX560, 3 pcs. - Thrust bearing: load capacity 20,000 kg - Heating: 6.9 kW, 3+1 heaters - Cooling: 1/16 HP, 3 fans - Motor: POWERTEC Frame 184 TC, 5 HP, 0–1750 rpm Condition: complete, fully operational line, ready for operation Application: plastic processing in co-extrusion processes Technical documentation available upon request. Includes additional spare parts.

Year of construction: 2004, condition: ready for operation (used), functionality: fully functional, Each line comprises: • Main extruder: BA105 AMUT, year of manufacture 2004 • Single-screw co-extruder: ROYAL EUROPA (Canada), year of manufacture 2005 • Pneumatic raw material conveying system • Cooling table with tank (AMUT NERG10, 10 m), year 2004 • Puller-saw (TP25, 7 m), year 2004 • Run-out table _____ Gedpfx Ajyc R Aasfcsua TECHNICAL DATA – BA105 AMUT Extruder • Screw: Ø105 mm, length 24 L/D • Type: PCD90WEF; VBM105-24-007 • Speed range: 2.66 ÷ 26.6 • Screw material: alloy steel 41CrAlMo7, hardness 1000 HV • Gearbox: ratio 1:65.6 R • Thrust bearing: 1,400,000 N • Barrel heaters: 42.92 kW (7 heating zones, 4 cooling zones) • Main motor: 60 kW, 1750 rpm • Degassing: pump 2.2 kW, 30 m³/h, vacuum 700 Hg _____ TECHNICAL DATA – ROYAL EUROPA Co-extruder • Type: 253-100-000, column-mounted • Screw: Ø1¾", length 21D, compression ratio 2:1, double-flight • Screw and barrel material: AISI 4140 steel • Bimetallic barrel: Ø3" O.D. / Ø1¾" I.D. • Screw hardness: 50–52 RC Gearbox: • Type: ROSSI RCI 100 U03A • Ratio: 1:15.2 + belt 1:1.65 (overall 1:25) • Belt type: 3VX600 (4 pcs) Heating and cooling: • Heating power: 8.9 kW • Heaters: 4+1 • Cooling: 1/16 HP, 4 fans Motor: • POWERTEC Frame 215 TC • Power: 10 HP • Speed range: 0–1750 rpm Technical condition: Both lines complete and fully operational Ready for profile production using multilayer co-extrusion Possible to sell one or both lines – as per buyer’s requirements On-site presentation available. Documentation and photos available. It is possible to purchase a single line for €100,000.00.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, The line includes: - Main extruder: BA130 (Cobra), year of manufacture 2008 - Co-extruder: CM65, year of manufacture 2008, sold for parts - Embosser, cooling tank, nailer, puller, perforator, guillotine – all year of manufacture 1996 TECHNICAL DATA – BA130 Extruder (Cobra) - Main screw: Ø130 mm, length 26 L/D - Center distance: 1050 mm - Screw material: XALOY 41CrAlMo7, hardness 1000 HV - Gearbox: 1:31:7 R - Thrust bearing: 2 020 000 N - Barrel heaters: 74.6 kW (7 heating zones, 6 cooling zones) - Main motor: 205 kW, 1460 rpm - Degassing: pump 4 kW, 100 m³/h, vacuum 700 Hg - Feeders: 2x motor 2.2 kW, ratio 1:25:4 R, screw speed 112 rpm Technical condition: The line is operational and ready for production The configuration allows for the complete siding production process – from granulate to finished profile Gusdpsyc Rtxjfx Afcoa Individual price quotation and on-site machine demonstration available.

Year of construction: 2022, condition: used, Model: TJ-750 Suitable Sheet: PP/PS/PET Max. Sheet Width: 750mm Sheet Thickness Range: 0.35-2mm Screw Rod Dia.: 75mm Screw L/D ratio: 40:1 Main Motor Power: 110kw Total Power: 350kw Max. Output: 300-400kg/hr Power supply: AC 380V, 50Hz, Three-phase, Four-wire Dimension: L22500xW3200xH3600mm Guedpfeyvh Ubex Afcea Weight: About 15T

Year of construction: 2022, condition: used, Model: TTF-520AF Forming Area: 520mm x 400 mm Forming Depth (Max.): 110mm Sheet thickness: 0.2-1.6mm Forming Speed (Max.): 30times/min Air pressure: 0.6-0.8mpa Air consumption: 3.0 m³/min Water consumption: 0.7 m³/h Sheet width (Max.): 550mm Suitable Sheet: PP, PS, HIPS, PET, PVC, PLA etc. Power supply: AC 380V, 50Hz, Three-phase, Four-wire Guodpfx Aeyvh Tqofcsa Used power: 55Kw Rated power: 136Kw Heating power: 75Kw Procedure: Forming-punching-cutting-stacking Dimension: L10800*W4650*H2670mm Weight: About 11.0T

Year of construction: 2022, condition: used, Model: TQC-650B Gusdpjyvh S Hjfx Afcsa Max. Forming Area: 650*300mm Max. Forming Depth: 125-180mm Sheet Thickness: 0.3-1.8mm Sheet Width: 660mm Max. Forming Speed: 30 times/min Air Pressure: 0.6-0.8mpa Air Consumption: 2.0m³/min Water Consumption: 0.5m³/h Rated Power: 98Kw Used Power: 69Kw Power Supply: AC 380V,50Hz, Three-phase, Four-wire Dimension: L7000*W2000*H3100mm Weight: About 5T

Year of construction: 2000, condition: used, functionality: fully functional, Polypropylene sheet processing / extrusion line for sheets up to 80 mm thickness x 1,200 mm width. No. 01 CNC machine with 8 tools, Siemens controlled, table size 2520x1700 mm No. 01 CNC machine with 8 tools, Siemens controlled, table size 2520x1260 mm No. 01 CNC machine with 10 tools, Osai controlled, table size 4,000x1,800 mm No. 01 PPH extruder for sheets width 1230 mm and integrated cutting unit No. 01 PPH mechanical/pneumatic welding machine for plates/frames No. 01 PPH pneumatic welding machine for frames No. 01 PPH hydraulic/pneumatic welding machine for handles Gedpfxjxwnb Io Afcoua No. 01 PPH hydraulic welding machine for sheets width 3,000 mm No. 02 forklifts, each 2,500 kg capacity No. 01 PPH shredder, 100 kg/h No. 03 portable PPH extruders No. 02 vacuum lifters, 150 kg each

Condition: excellent (used), Year of construction: 2005, Vertical blockmold: KURTZ mod. MFV (1250×1250 / 1050×4900) Basic data: -Year of manufacture: 2005 -Block dimensions (L×W×H): 1250×1250 / 1050×4900 mm -Operating voltage: 3×400 V, 50 Hz -Power consumption: 77 kW -Blockmold with movable side wall -Complete vacuum system (GARDNER DENVER / SIEMENS) Gedpfxjucvq Hs Afceua -Hydraulic system: REXROTH–BOSCH -Operational pre-loading silo for the blockmold with dedusting system -Siemens PLC controller and Siemens touch-screen HMI control panel replaced with NEW units in 2019, including a control software upgrade -Siemens TOUCH SCREEN panel (replaced with a NEW one with a larger display) -MATTHEWS printer for block labeling/date marking -Block evacuation system with block storage -Complete set of documentation -Condition: EXCELLENT It is possible to adjust the maximum block height to, for example, 4550–4600 mm. TAG: Block mold, block mould, block-form, styrofoam, EPS, VIRO, Kurtz, Erlenbach, EREMA, Teubert, Lauscha, Autefa, HIRSCH, EPPINGER, Mert Makina

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Combo - contour cutter//cutting line: TECNODINAMICA mod. KAOBAND -Cutting line for blocks of size 4800x1200x1200 (finished block size) - Tipper - Guillotine for sectioning up to 2400 mm for the pantograph - Automatic rotation of the cut block for contour cutter/pantograph - Horizontal cutting with automatic wire positioning - Pantograph integrated in the first station with automatic wire positioning. - Automatic lower scrap miling - Side cutting with manual wire positioning - Down cutter with manual wire positioning - Safety fences with micro switchs Godpfxsuct Szs Afcoua - PLC with INPUT/OUTPUT cards connected to the PC - Machine in excellent condition - Total length approximately 37m

Year of construction: 2005, condition: excellent (used), Vertical block mould machine: Kurtz mod. Ecomat Basic data: • Year of production: 2005 • Block dimensions (LxWxH): 1060x1320x5200 mm The set includes inlays (height reducers) for blocks: - 1060x1320x5130 mm - 1060x1320x4000 mm • Electrical power demand: 400V; 50Hz • Operation silo • Roll out conveyor • Block scale • Inkjet printer • Complete documentation We also have for sale other machines for EPS (expanded polystyrene) production, such as: •steam generator •steam accumulators with capacity •3x cutting lines •3x blockmolds Godpfxoxq N Amj Afcoua •pre-expander It is also possible to purchase a complete production line (including installation, commissioning, and staff training).

Year of construction: 2003, condition: excellent (used), For sale: KURTZ cutting line mod.VBR-S3 (Complete set: cutting KURTZ mod. VBR-S3, KUKA selection robot, packaging VIRO mod. PPZA-1300/24/MZG, palletizing, wrapping) EPS block cutting line with maximum dimensions of 5000x1200x1200. A block option of 600x1200x2400 is also available Gedpfx Afeuct Upocsua Complete line in "U" arrangement, consisting of: - Block buffer loading by dump truck - Horizontal cutting with automatic wire positioning, with double-frame cutting and oscillation - Polystyrene waste/scrap removal system: top, bottom, sides - Side cutter with manual wire positioning - Down cutter with automatic wire positioning - Anthropomorphic robot for product selection - VIRO packaging machine - Rotation of packages for cross stacking - It is possible to palletize different size polystyrene boards on wooden pallets or on glued polystyrene strips under the column with stacked polystyrene packages - Automatic stacker/palletizer for creating columns up to 3 meters high and up to 3 meters long - Vertical wrapping machine for automatic stretching of columns of polystyrene packages - Complete with inkjet printers and automatic labelers - Siemens S7 PLC controller - Complete with safety barriers with switch type protection - High-capacity line, in very good condition, requires an area of about 600 m2 (40m x 15m) - Year of manufacture: 2003 - Electricity requirements: 400V; 50 Hz; 115 kW; 300A