Used foil processing machinery for sale (8)

Condition: excellent (used), Bystronic Type: ERMM180 Thermoplastic applicator Field of application The thermoplastic applicator applies a thermoplastic material to rectangular glass panes rectangular glass panes as part of a production line for solar modules. The plastic forms a seal to a second pane of glass, which is applied in a later step. applied in a later work step. The panes are fed, applied and removed on horizontally running belts/belt conveyors. belts/conveyors. The thermoplastic applicator is a highly technical machine that has to fulfill many requirements with great precision. For this reason, you should only use products (glass, sealant) that meet the specifications on the following pages. the following pages. This helps to achieve high-quality and safe production. production. Performance and connected loads Maximum transport speed: 18 m/min Height of the glass running surface: 1100 mm Height of the applied sealant line: 0.5 to 1.2 mm Maximum width of the applied sealant line: 12.0 mm Required constant pneumatic inlet pressure: 6.5 to 8.0 bar Pneumatic operating pressure: 6.0 bar Compressed air consumption in normal operation: 10 standard liters/min Compressed air consumption when changing barrels: 500 standard liters/min Average energy consumption per hour: 10 kWh Working temperature of the sealant: 110°C to 130°C Ambient conditions and emissions Minimum ambient temperature: +15°C Maximum ambient temperature: +35°C Maximum relative humidity:: 75% Noise level: less than 70 dB (A) Requirements for the drums for the sealant Design: Material lidded container D18 according to DIN 6644 - with base (F1) and smooth outer surface (jacket design, smooth). Capacity: 216 liters Inner diameter: 571.5 mm Height: 874 mm Minimum wall thickness: 1.25 mm Machinable glass panes Types of glass Glass panes with a smooth surface can be processed (float glass). Dimensions and weights Smallest dimensions Largest dimensions Geometry 1198 mm 1200 mm Length LS 498 mm 600 mm Width BS Fsdpjd N Erpefx Adajpb 1.8* mm 5.0* mm Thickness DS Thermoplastics based on poly-iso-butylene (butyl) can be processed. The plastic must be flowable in the range of approx. 110°C to 130°C and have a defined viscosity curve. viscosity curve. Only use materials that have proven themselves in practice and that have been approved by the manufacturers of these materials and by Bystronic. by the manufacturers of these materials and by Bystronic for your intended use. intended use. For detailed product descriptions and information on handling, storage and disposal of the plastic disposal of the plastic used can be found in the information sheets and safety data sheets provided by the manufacturers of the plastics. Dimensions of gantry robot with glass conveyor Height x width x depth: 2800 x 1890 x 2735 mm Weight of the gantry robot: 850 kg Weight of the glass conveyor: 1400 kg Drum pump dimensions Height x width x depth: 3320 x 1060 x 1200 mm Weight (without drum): 850 kg Weight (with drum): 1100 kg Height H for drum pump FP1: 4400 mm Height H for drum pump FP2: 4000 mm Control cabinet dimensions Height x width x depth: 2200 x 1800 x 600 mm Weight: 450 kg The applicator was used with the material butyl. Condition: second-hand / used From test laboratory, as good as new condition, only a few operating hours for testing! Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Used high-performance roll garbage bag production machine for sale. Equipment: Roll lifter, longitudinal welder, folder, bottom welder, labeller. The machine is in excellent condition and can be inspected during operation. Support and spare parts are available from the manufacturer. Technical data: - Welding width: 700 mm - Maximum bag length: 2000 mm - Minimum bag length: 380 mm - Film speed: 120 m/min - Drive type: Servo - Number of tracks: 2 Additional specifications: - Heavy-duty, automatic 2-lane roll garbage bag production machine - Film thickness: LD/LLDPE: 0.012–0.060 mm (single layer) HDPE: 0.008–0.015 mm (single layer) - Bag width: 300–700 mm - Line speed: 100–165 m/min (speed depends on material, thickness, and film quality) - Finished roll size: roll width 200–300 mm; roll diameter up to 130 mm - Power demand: 20 kW Single-line labelling machine: - Label width: 70–200 mm (1 lane) - Label length: 180–350 mm - Maximum label roll diameter: 250 mm Fpedsx Ry Enspfx Adaob Year of manufacture: April 2006 Components: 1. TAI-1300C Lifting unwinder 2. SSB-1300A Slitting knife, longitudinal welder 3. TA-800C1 Bag making and welding unit 4. TAF-400-2N-M 2-lane folding machine 5. TAD-700 Four-axis spindle winder Additional details: - Warranty: None - Current status: In production - Availability: Immediate

Condition: used, WIDMANN automatic film unwinder, film unwinder Rewinder and unwinder, unwinder, rewinder, winding machine, roll winding machine, roll unwinding machine Unwinder with deflection rollers and film guide system Unwinder with deflection rollers for constant strap tension Year of construction approx. 2000 Roll width - coil width max. 400 mm Material width max. 400 mm Deflection rollers Ø 80 mm Deflection roller width 430 mm Roll weight - coil weight max. 150 kg Expansion shaft for cardboard core with inner diameter Ø 76 mm (inner coil diameter) Roll outer diameter - coil outer diameter max. 600 mm Interference circle with rotation of the film reel max. Ø 800 mm Reel shaft speed approx. 70 rpm Motor power - drive of the film reel 0.37 kW Mains connection 400 Volt, 50 Hz Fodpfx Adoud U Sfeaspb - Constant belt tension, winding tension via film accumulator with deflection rollers and vacuum shaft - Pick-up shaft with chuck for large rolls with cardboard core inner Ø 76 mm - 8 deflection rollers for film accumulator with constant winding tension, bearing via precise linear guide - Gear motor LENZE with brake to drive the film roll (0.37 kW) - Electrical system not ready for operation, see pictures Space requirement L x W x H approx. 1000 x 1000 x 1900 mm net weight 360 kg good condition

Condition: excellent (used), Year of construction: 2002, COMEXI solventless laminating machine, year 2002, 1300 mm wide; two Corona VETAPHONE treaters; BST aligners; DOPAG dosing mix; quick sleeve change; touch screen; pneumatic shafts; temperature controllers. Fpjdjt Ipatopfx Adajb

Condition: good (used), functionality: fully functional, The subject of sale is a line for the production of laminates by pouring foil onto the laminated material. The lamination process is carried out using an extruder (extruders because there are two pieces) equipped with slotted dies with adjustable outlet width, thanks to which laminates can be produced in widths from 1m to 1.6m. The thickness of the foil that can be produced is 60 microns to 200 microns. The machine is great for combining different materials with each other, you can create various types of technical products according to your predispositions. The line also includes a material accumulator with a welding gun that allows feeding the material without the need to stop the line. The line does not include elements that are marked in red in the photos. The machine can also produce bubble wrap for technical applications. If necessary, we can also start the line at the buyer's premises, for an additional fee. The line is fully functional, we recommend it for various laminates. Description of the laminate production line The sales technology is a laminate production line, using the method of casting a film onto another material. The lamination process is carried out using an extruder (there are two extruders) equipped with slotted T-dies with adjustable width, thanks to which it is possible to produce laminates with a width of 1 m to 1.6 m. The thickness of the labels, which can be available from 60 microns to 200 microns, the machine is perfect for dividing various materials that can be created in the type of technical products according to its characteristics. The line also includes an accumulator device with a welded device for feeding material without power to the line. The line does not contain elements that are marked in red in the photos. The machine can also produce bubble wrap for technical applications. Fodpfxjvkv Hce Adaopb If necessary, we can also launch the line at the buyer's premises for an additional fee. The line is fully functional, we recommend it for making laminates.

Condition: refurbished (used), Bag Machine , retrofit , 680mm working whidth. Fpsdpfjxf Txhox Adaob

Condition: like new (used), Year of construction: 2018, functionality: fully functional, FLEXOPRINTING MACHINE, 4 COLOURS, 800 mm PRINTING SECTION NUMBER OF COLOURS: 4 colours PRINTING COMBINATION: (4+0-3+1-2+2) PRINTING WIDTH: WEB: 800 mm MAX WIDTH: 870 mm PRINTING LENGTH: 350–900 mm PRINTING SPEED: 150 to 200 m/min Material to print: BOPP, LDPE, HDPE Printing system: Doctor Blade system UNWINDER DOUBLE UNWINDER TENSION CONTROL OPERATED BY PNEUMATIC ROLLERS CYLINDER OUTER DIAMETER: 800 mm REWINDER Fpsdpfow Dpdgjx Adajb DOUBLE REWINDER TENSION CONTROL OPERATED BY PNEUMATIC ROLLERS CYLINDER OUTER DIAMETER: 800 mm ALL ELECTRICAL CONNECTIONS ARE 'PLUG AND PLAY'

Condition: used, WIDMANN automatic film unwinder, film unwinder Rewinder and unwinder, unwinder, rewinder, winding machine, roll winding machine, roll unwinding machine Unwinder with deflection rollers and film guide system Unwinder with deflection rollers for constant strap tension Year of construction approx. 2000 Roll width - coil width max. 400 mm Material width max. 400 mm Deflection rollers Ø 80 mm Deflection roller width 430 mm Roll weight - coil weight max. 150 kg Expansion shaft for cardboard core with inner diameter Ø 76 mm (inner coil diameter) Roll outer diameter - coil outer diameter max. 600 mm Interference circle with rotation of the film reel max. Ø 800 mm Reel shaft speed approx. 70 rpm Motor power - drive of the film roll 0.37 kW Motor power - drive of the flat film into the vacuum shaft 0.25 kW Mains connection 400 Volt, 50 Hz - Constant belt tension, winding tension via film accumulator with deflection rollers and vacuum shaft Fodpeu H R Iqofx Adaopb - Pick-up shaft with chuck for large rolls with cardboard core inner Ø 76 mm - 8 deflection rollers for film accumulator with constant winding tension, bearing via precise linear guide - LENZE geared motor with brake to drive the film roll (0.37 kW) - LENZE geared motor with brake to drive the flat film into the vacuum shaft (0.25 kW) Space requirement L x W x H 1900 x 1300 x 1900 mm net weight 580 kg Good condition