Used pillar drills with a drilling capacity over 50mm for sale (32)

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, ALZMETALL AX 4 / SV pillar drilling machine 3KW Manufacturer: Alzmetall Type: AX 4 / SV Condition: NEW Year of manufacture: 2025 Drilling capacity steel E335 (St 60) 55 mm Thread cutting Gbjdpfx Afsy S Axgskon Steel E335 (St 60) M 42 Cast EN-GJL-200 M 56 Short spindle MK 4 Spindle stroke 140 mm Usable projection 300 mm Column diameter 145 mm Machine table, usable support 615 x 430 mm Distance spindle-table min./max. 150/735 mm T-slots, number x width x distance 2 x 14 x 224 mm Feed 0.1 + 0.3 mm/rev Machine height approx. 1850 mm Net weight approx. 380 kg Drive stepless Motor 1500 rpm Power 3.0 kW Spindle speed rpm 70-2400 Standard equipment: Main switch with motor protection switch, lockable Mushroom push button (latching) for EMERGENCY STOP Speed adjustment stepless Speed display digital Feed overload protection Protection class IP 54 Spindle protection with electrical protection Paint: DD structural paint signal white RAL 9003, PANTONE 7545c, black Machine oil: initial filling; Container supplied loose Available options: - LED machine light - Thread cutting device with soft start (from 2025) - Coolant device in the base - Digital drilling depth display - Drilling depth fine adjustment 0.1 mm

Condition: used, Technical details: bore capacity in steel (diameter): 22 mm throat: 205 mm bore stroke: 100 mm Godpfsvxf Irex Afkebn spindle taper MT: MK2 spindle speed:: 2 step U/min feed: manuell mm/U Distance spindle/table max.: 150 - 600 mm base plate surface area: 350 x 400 mm table clamping surface:: 360 x 280 mm table rotating: 360 ° drill table adjustment: 450 mit Kurbel mm column diameter: Ø 100 mm control voltage: 380 V total power requirement: 0,8 kW weight of the machine ca.: 270 kg dimension machine xH: 0,6 x 0,5 x 1,95 m column drill incl. machine + vice. *

Condition: used, Box column drilling machine WEBO Series- No 132 Machine No: 9 Drilling capacity 50 mm Spindle cone MK 5 - long quill throat 430 mm spindle stroke 280 mm Height adjustment of drill head 500 mm Table size Ø 725 mm Distance between drill spindle and table max. 740 mm Distance between drill spindle and clamping surface on machine base max. 1240 mm Spindle speed 55-820 rpm Feed rate level 1 0.13 - 0.2 - 0.27 - 0.4 mm/rev. Feed rate stage 2 0.6 - 0.83 - 1.17 - 1.8 mm/rev. Column diameter 300 mm Motor power 2.8 / 3.6 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator - Manual drill head height adjustment via hand crank, clamping with clamping screws - Rotatable drill table with mechanical clamping - Table height adjustment via hand crank - Clamping surface on machine base 600 x 550 mm Top height of drill head 3020 mm Overall height drill head bottom 2520 mm Space requirement L x W x H 1400 x 780 x 2520 mm Weight 1600 kg Gsdpfx Aeqa Txqofkjbn good condition

Condition: new, MIOTAL® GB 50 VG geared pillar drilling machine with thread cutting device Technical data: Drilling capacity: 50 mm tool holder: MK 4 quill stroke: 200 mm tapping capacity: M33 face milling cutter: 100 mm end mill: 25 mm throat depth: 340 mm table size: 600 x 600 mm column diameter: 180 mm Gedpfxepxmlis Afkobn number of T-slots: 2 T-slot size: 22 x 35 mm motor power: 3 kW Weight, approx.: 750 kg Equipment: - Coolant device - Automatic spindle feed - Thread cutting device - LED machine light - Height adjustable protective cover - Table rotatable - Manual fine feed - Limit switch protected spindle

Condition: used, Year of construction: 1956, bore capacity in steel (diameter) 50 mm throat 385 mm bore stroke 240 mm table surface area ø 500 mm spindle taper MT 5 spindle turning speed range 40 - 800 U/min feeds 0,1/0,14/0,2/0,28/0,4 mm/U column diameter 220 mm Gbodpfevh I U Tox Afkon distance between table/spindle max. 670 mm distance spindle/base plate 1180 mm total power requirement 4 kW weight of the machine ca. 1,4 t dimensions of machine L x W x H 1,5 x 0,75 x 2,4 m Accessories: drill chuck, coolant

Condition: good (used), functionality: fully functional, Data: Tool holder MK 5--- Drilling capacity with ST60 50 mm--- Infinitely variable speed ranges approx. 40 - 180 rpm + 180 - 800 rpm--- 5 feeds 0.1 / 0.14 / 0.2 / 0.28 / 0.4 mm/rev--- Table surface, 880 x 670 mm--- throat depth: 385 mm--- Godpfxsy St Hnj Afkjbn

Condition: like new (used), functionality: fully functional, drilling capacity: 50 mm, As-new machine in particularly robust box frame design. Offered at a price reflecting its condition. Please, no private enquiries! Godpfx Ajy Rx Nfofkobn

Condition: good (used), Year of construction: 1992, Drilling machine, bench drill, pillar drill, column drill -Manufacturer: Alzmetall, Pillar drilling machine type AX2 S Gjdpfx Afjyv Ahvskjbn -Spindle mount: MK2 -Motor: 0.37 / 0.55 kW -Speed adjustment: stepless -Speeds: 450 - 4300 rpm -Table size: 250 x 250 mm -Travel distance: 560 mm -Spindle stroke: 90 mm -Protrusion: 250 mm -Column Ø: 90 mm -Dimensions: 720/540/H1650 mm -Weight: 145 kg

Year of construction: 1970, condition: used, machine/vehicle number: 12901, drilling capacity steel/GG: 50/60 mm Gbodsy R Thopfx Afkon spindle taper: 5 MK arm length: 400 mm table size: 700 x 600 mm spindle sleeve stroke: 275 mm spindle turning speed range: 32 - 1030 rpm carriages: 4: 0,1 - 0,4 mm engine: 380 V, 2,2/3,7 kW space needed: 700 x 1200 x 2700 mm weight: 1240 kg

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 12570 € 241.34 € Gsdpfxswiq Hys Afkebn 50 mm MK 4 350 mm 93 - 152 - 204 - 298 - 44 U/min 3 kW M35 480 mm 755 mm 2265 mm 435 kg 0,1 / 0,18 / 0,24 mm/U 180 mm 150 mm ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE Gear drive 3 aut. feeds sliding machine table solid drill head tiltable turntable front wheel for sensitive fine feed (sample photo) OPTIONS (PRICES ON REQUEST): lighting equipment L coolant equipment and machine base with T-slots ERB Reverse for tapping IR/RS

Condition: good (used), Drill, pillar drill, column drill, column drill -Manufacturer: Alzmetall, pillar drilling machine type AB5/S -Engine: VKS 3 kW -Speed: 40 - 800 rpm, continuously variable right-left rotation -Feed: 0.1 - 0.14 - 0.2 - 0.28 - 0.4 mm/rev. -Table size: Ø 500 mm, travel 470 mm -Spindle holder: MK5 -Spindle stroke: 240 mm -Projection: 380 mm -Column Ø: 220 mm Gsder Ngp Uepfx Afkebn -Dimensions: 1450/680/H2160 mm -Weight: 1262 kg

Condition: new, bore capacity in steel (diameter) 55.0 mm throat 300 mm bore stroke 140 mm morse taper 4 MK Gbedsxabn Tspfx Afkon table: 615 x 430 mm turning speeds 70 - 1200 U/min column diameter 145 mm thread M 30 ST60 thread M 36 GG20 feed 0.10 + 0.30 mm/U distance spindle /table 150 / 735 mm engine output 1.8 / 2.9 kW weight 380 kg Machine height 1850 mm NEW ALZMETALL MODEL RANGE 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device * for thread cutting with a stop * max. 6 threads / min (thread cutting performance depends on the spindle speed) * Thread depth adjustable via depth stop * in the TFT - LCD display (3 tools). - automatic spindle feed with feed overload protection - Infinitely variable speed setting by means of an adjusting lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Painting: DD textured paint signal white RAL 9003, PANTONE 7545c, black - Machine oil first filling: oil bottle, loose delivery including special accessories: - 12. LED machine light - 24. Coolant system A * in the machine base

Condition: good (used), functionality: fully functional, rotational speed (max.): 1,400 rpm, rotational speed (min.): 32 rpm, throat depth: 355 mm, overall weight: 1,700 kg, drilling capacity: 50 mm, For sale: 1 used pillar drilling machine Manufacturer: WMW Saalfeld Gbjdsvytw Depfx Afkon Type: BK50 AI Drilling capacity in steel: 50mm Thrust: 355mm Spindle mount: MK5 Speed: 32 - 1,400 rpm Table size: 770 x 640mm Clamping surface: 630 x 550mm Base plate: 490 x 530mm Machine weight: 1.7t The machine can be viewed in our warehouse in 09599 Freiberg.

Condition: new, neu 3935 ca. 10 Wochen ab Auftrags Spanien 18150 € 348.48 € Gjdpswiq H Hofx Afkebn 50 mm MK 4 400 mm 54 - 1032 (9) U/min 2.9 kW M36 600 mm 1200 mm 2500 mm 710 kg 0,1 / 0,2 / 0,3 / 0,4 mm/U 230 mm 200 mm 50 - 850 mm 1290 mm 550 x 550 mm 1060 x 600 mm ERLO(MADE IN SPAIN) FOR MANUFACTURING USE High quality gear drilling machine cooling equipment VDE electric chuck protection left right drilling lighting front handwheel for sensitive feed table turn and tiltable user manual in GERMAN OPTIONS (PRICES ON REQUEST): manual tapping systemIR/IRS electronic speed variator with digital read out VE+TAK digital read out for drilling depth LBC ALTERNATIVE: ERLO B-50 VERSION WITH ELECTROMAGNETIC CLUTCH PRICE ON REQUEST

Condition: new, bore capacity in steel (diameter) 60.0 mm threading M 42 throat 350 mm bore stroke 200 mm turning speeds 60 - 1530 U/min table: 720 x 510 mm bore spindles - Morse Taper 4 Kurzspindel MK column diameter 200 mm Gbedpfx Aoxabgiefkon feed 0.15-0.2-0.3-0.36 mm/U distance spindle /table 159 / 884 mm engine output 3.6 / 4.3 kW weight 605 kg Machine height 1950 mm Furnishing : - automatic feed with electromagn. Feed clutch - 4 feed levels 0.15 / 02, - 0.3 - 0.36 mm / rev - stepless speed adjustment - digital speed display - Feed overload protection - Spindle protection with electr. validation - digital speed display - machined base plate including special equipment: - Coolant device mounted in the foot pos. 24. - Thread cutting device pos. 20.0 - LED machine light pos. 12.

Condition: new, bore capacity in steel (diameter) 55.0 mm threading M 30 / M 42 throat 300 mm bore stroke 140 mm turning speeds 70 - 1200 U/min table: 615 x 430 mm bore spindles - Morse Taper 4 Kurzspindel MK column diameter 145 mm feed 0.10 + 0.30 mm/U Gbsdpfexaa E Rjx Afken distance spindle /table 150 / 735 mm weight 380 kg Machine height 1850 mm Furnishing : - automatic feed - Feed device 0.1 + 0.3 mm / rev - stepless speed adjustment - digital speed display - Feed overload protection - Spindle protection with electr. validation including special equipment: - Coolant device mounted in the foot pos. 24. - Thread cutting device pos. 20.0 (Thread cutting with stop) - LED machine light pos. 12.

Condition: new, bore capacity in steel (diameter) 50.0 mm throat 300 mm bore stroke 160 mm threading M 30 turning speeds 100 - 1600 U/min Gbodpfjxabq Ijx Afkon table: 615 x 430 mm bore spindles - Morse Taper 4 Kurzspindel MK column diameter 145 mm feed 0.1-0.2-0.3-0.4 mm/U distance spindle /table 147 / 688 mm engine output 1.8 / 2.9 kW weight 450 kg Machine height 1865 mm Furnishing : - automatic feed with electromagn. Feed clutch - 4 feed rates 0.1-0.2-0.3-0.4 mm / rev - stepless speed adjustment - digital speed display - Feed overload protection - Spindle protection with electr. validation - digital speed display - machined base plate - Motor 1.8 / 2.9 KW - 100 - 1600 rpm. Special accessories included: - LED machine light pos. 12. - Thread cutting device pos. 20.0 (Thread cutting with stop) - Coolant device "A" pos. 24. (Coolant base plate, complete) - digital drilling depth display pos. 37.1 (5-digit LED display)

Condition: new, Year of construction: 2023, bore capacity in steel (diameter) 34 mm throat 300 mm bore stroke 150 mm bore capacity in cast iron (diameter) 40 mm thread capacity M 27 spindle taper MT 4 Gedpfxet U Sc Rs Afkebn spindle speeds: Stufenlos 100 - 2000 U/min column diameter 125 mm automatic feeds 3 / 0,1 - 0,2 - 1,3 table: 400 x 420 mm Drive Keilriemen total power requirement 3 kW weight of the machine ca. 360 kg dimensions of the machine ca. 2,3 x 0,6x 1,1 m Column drilling machines - V-belt drive with foot switch - Drilling machine of circular column feed automaticmechanical - Drive by electronic wide V-belt - Spindle taper: CM 4 - Stepless speed adjustment with frequency converter - Potentiometer for speed adjustment - digital speed display - Automatic feed reversal when threading - Scale with adjustable drilling depth - automatic tool ejector - Push button for EMERGENCY STOP switch for right/left rotation - Electronic control integrated in the drill head - integrated coolant device - Machine light - height-adjustable chip protection disc with micro switch - fixed table - CE marking

Condition: new, bore capacity in steel (diameter) 50 mm bore capacity in cast iron (diameter) 60 mm threading cutting capacity: M42 throat 360 mm bore stroke 200 mm spindle taper MK 4 feed range - spindle 0,1-0,2-0,3-0,4 mm/U spindle turning speed range 190 - 1900 U/min column diameter 175 mm table surface area 550 x 550 mm total power requirement 4 kW weight of the machine ca. 0,85 t dimensions of the machine ca. 2,2 x 0,7 x 1,3 m - large stepless speed range in 3 stages - mechanical speed adjustment with hand lever (model V) - electronic speed adjustment with frequency converter (model VE) Gbsdpfen Ea Twsx Afkjn - Front digital speed display - Gear lubrication by automatic oil pump “VE” - Machine base plate with integrated coolant device - Machine light - MGI rotating and tilting table - Advance and automatic retraction with electromagnetic clutch - Front hand wheel for fine adjustment of the manual feed - Scale with adjustable drilling depth - Automatic feed reversal when threading - automatic tool ejector - Electric controls integrated in the drill head - EMERGENCY STOP button - Switch for forward/reverse rotation - Height-adjustable chip protection disc with micro switch - CE marking

Condition: new, bore capacity in steel (diameter) 25 mm bore stroke 120 mm MK 3 10 manuell 245 – 4.100 U/min manuell über Griffkreuz 300 x 270 mm 100 mm 250 mm 0,71 / 1,35 kW 0,23 t 700 x 500 x 1400 mm Bench drilling machine with V-belt drive and moveable intermediate table Max. thread cutting capacity for steel (St 60) M 18 - V-belt drive with 5x stepped pulleys and quick-release device - 10 fixed speeds - manual feed via grip cross - Scale with adjustable drilling depth - automatic tool ejector - Movable intermediate table, fixed drill head Gsdpfxjn Ea Tze Afkebn - Machine base plate with machined workpiece support surface - integrated machine light - EMERGENCY STOP button - Right/left rotation switch - High/low speed switch - Chip protection device with microswitch monitoring - thermal magnetic motor protection - Switching electronics in the low-voltage range - Color signal gray (RAL 7004) and graphite black (RAL 9011) - CE conformity and marking - Documentation, operation and maintenance manual

Condition: new, bore capacity in steel (diameter) 50.0 mm throat 360 mm bore stroke 225 mm morse taper 4 MK table: 570 x 480 mm threading M 42 Stahl turning speeds 50-316 / 316-2200 U/min feed 0.08 - 0.50 mm/U column diameter 180 mm distance spindle /table max. 580 mm distance spindle/base plate max. 1185 mm total power requirement 3.0 kW weight 630 kg range L-W-H 1020 x 750 x 2340 mm Scope of delivery - Keyed drill chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 4 / B 16 - Reducing sleeve MK 4 / 3, MK 4 / 2, MK 3 / 1 - Motorized table stroke - Coolant device - Touchscreen - Automatic tool ejector - Electromagnetic spindle feed - Thread cutting device - Initial filling with Shell Tellus 46 Gbodpfx Asxacc Sefken - LED machine light - Digital speed display - Digital drilling depth display - Height-adjustable protective cover

Condition: new, bore capacity in steel (diameter) 50.0 mm throat 370 mm bore stroke 250 mm morse taper 4 MK table: 600 x 500 mm threading M 42 Stahl turning speeds 40 - 2100 U/min feed 0.1 - 0.4 mm/U column diameter 200 mm distance spindle /table max. 600 mm distance spindle/base plate max. 1190 mm total power requirement 2.2 / 2.8 kW weight 670 kg range L-W-H 1020 x 750 x 2340 mm Scope of delivery - Keyed drill chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 4 / B 16 - Reducing sleeve MK 4 / 3, MK 4 / 2 - Motorized table stroke - Coolant device - Electromagnetic spindle feed - Thread cutting device - Automatic tool ejector - LED machine light - Initial filling with Shell Tellus 46 - Digital speed display Gbedpfx Asxaay Isfksn - Digital drilling depth display - Height-adjustable protective cover

Condition: new, Drilling capacity ----- 50 mm Tap capacity ----- M33 Motor ----- 3 kW Speed range ----- 55 ~ 1450 rpm Spindle stroke ----- 210 mm Spindle mounting ----- MK4 Automatic spindle feeding ----- 0.1 / 0.2 / 0.3 / 0.4 mm/rev Drilling table ----- 580 x 580 mm Foot ----- 860 x 580 mm Unloading ----- 375 mm Column diameter ----- 180 mm Gbedsga T H Iepfx Afkon Maximum distance spindle - table ----- 800 mm Maximum distance spindle - foot ----- 1325 mm Weight ----- 860 KG INCLUDED * Motorized table adjustment * LED worklight * Cooling system * Digital depth stop * Tap function * 2-speed motor * CE plug * Case with various tools

Condition: good (used), Year of construction: 1988, machine/vehicle number: 1669-110-1406, Offer 25094 Technical specifications: - Drilling capacity in steel ST 60: 50 mm - Drilling capacity in steel ST 60: 60 mm - Drill spindle mount: MT 4 - Drill spindle stroke: 225 mm - Drill spindle speed continuously adjustable from 35 – 950 rpm - Right-hand and left-hand rotation - 3 feed rates: 0.1; 0.16; 0.25 mm/rev - Throat 360 mm - Max. distance between drill spindle and table/base plate 740/1220 mm - Table with 2 T-slots 700 x 590 mm - Height adjustable via rack and pinion with hand crank - Drive 400 V / 2.2 / 4.0 kW - Space required approx. W 700 x H 2150 x D 1150 mm - Weight approx. 850 kg - With: - Emergency stop button - Lighting - Coolant system Gsdpfx Afjwdvwtoksbn

Condition: good (used), Year of construction: 1972, Drilling capacity in steel 70 mm Drilling capacity in cast iron 80 mm Spindle holder MK 5 Spindle projection 400 mm Spindle stroke 240 mm Column diameter 250 mm Speed range, infinitely variable 45 - 1325 rpm 5 feeds 0.1, 0.14, 0.2, 0.28, 0.4 mm/rev Table size 880 x 660 mm Motor power 3 kW Dimensions L x W x H 880 x 1200 x 2500 mm Machine weight 1400 kg Accessories / Special features: Gbsdpjt Uzk Rsfx Afken - Infinitely variable speed adjustment via PIV gearbox and reduction gear - Large clamping table 880 x 660 mm - Feed via cross lever - Large drilling depth adjustment with 240 mm fixed stop - Swivel table - Emergency stop switch - Coolant system Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel