Used Special Drill for sale (14,155)

Condition: excellent (used), Drilling heads – special gearboxes for Nottmeyer, etc. various drilling heads Nlsdogrkmvepfx Akieh

Year of construction: 1980, condition: good (used), Equipment: 4 horiz. Pinol drilling units, 3 vert. Pinol drilling units rotary table diameter: 400 mm rotary indexing table: 60° pitch weight: 2,6 to Nljdpfx Akjnvdmweijh 1 switch cabinet 1 coolant tank

Condition: used, machine/vehicle number: 231500079, -WT 108- Offered here is a table drilling machine and special drilling unit. Bench drill: - 5 speeds via pulley - throat / stroke: 10cm special drilling unit: - pneumatic clamping device - automatic feed Nodpfjlf Ezwsx Akislh

Year of construction: 1983, condition: used, machine/vehicle number: 7180793, Manufacturer: SAS-Zadar Model: SS Year of manufacture: 1983 Weight: approx. 4,000 kg Machine no.: 7180793 General / Technical Data: Special-purpose drilling machine for drilling holes in the lateral surface of cylindrical workpieces Drilling units: 8 units Feed system for drilling units: hydraulic feed via quill Drilling heads: interchangeable multi-spindle heads Workpiece diameter: approx. Ø30 to Ø40 mm Workpiece length: approx. 80 to 100 mm Workpiece clamping: hydraulic Cutting speed: hydraulically variable, stepless adjustment Machine dimensions (W x D x H): approx. 2,600 mm x 2,600 mm x 1,750 mm (excluding working area) Power supply / Connected load: 380 Volt, 50 Hz Accessories / Special Equipment: • Machine designed for mass production • Equipped with a sturdy machine table with chip disposal through the underside of the table center • Drilling heads are interchangeable Nlsdpfx Aswylwzokijh • Machine does not have an indexing table Remarks: The machine is exclusively designed for high-volume production. The machine is in its original paint and available for inspection at our warehouse.

Condition: excellent (used), Year of construction: 2014, Universally applicable frame and elongated hole drilling machine Specifically designed for window construction and universal use with pneumatic height adjustment. Double-hole drilling on two levels in a single clamping operation. Motor power: 1.5 kW Motor start with a practical handle switch. Equipped with a two-jaw chuck, 1–20 mm, by Röhm. Pneumatic adjustment of the machining height, allowing dowel holes to be drilled on two levels without re-positioning. The desired drilling heights can be set for each drilling level using a digital counter. Nlsdpfx Ake Aa A Eqjieh Switching between levels is then performed pneumatically from the front. Cross adjustment: 430 mm, stepless or in a 12 mm grid. Maximum height adjustment: approximately 100 mm above table height. Drilling stroke: approximately 150 mm. 2 pneumatic workpiece clamps. Grid rail for quick lateral adjustment in a 12 mm grid. Stop for length adjustment when milling elongated holes. 2 swiveling workpiece supports. Special stop system, approximately 3.1 m long, with swiveling stops. Removable special stop with centering via a lever mechanism for different ladder rung widths, etc. Dust extraction funnel. Center stop. Side stop. Drill head mount. Laser. Operating manual. CE marking. Few small areas where paint has been touched up. Almost new condition, see original photos. Dimensions: approximately 1500 x 900 x 1400 mm (L x W x H), weight: 300 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are readily available for demonstration in our warehouse; see "other offers from this seller."

Condition: excellent (used), Year of construction: 1955, Drilling capacity in steel St 37: Ø 65 mm Drilling capacity in cast iron: Ø 75 mm Spindle mount: MK 5 Overhang: 1250 mm Spindle stroke: 400 mm Spindle speeds: 22.4 – 1800 rpm Feed range: 0.056 – 0.56 mm/rev Column diameter: Ø 300 mm Motor power, 2-stage: 3.6 / 4.8 kW Clamping area, base plate: 1320 x 1000 mm Dimensions L x W x H (with motor!): 2250 x 1000 x 3100 mm Transport dimensions L x W x H (without motor!): 2250 x 1000 x 2800 mm Weight: 5100 kg Accessories / Special features: • Square table L x W x H 650 x 500 x 500 mm Nlodpfx Akotwzk Djieh • Central clamping device • Feed mechanism • Right-left operation • Motorized vertical movement • High speed range up to 1800 rpm • Coolant system • Lighting Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 1998, Hofmann HT 200 U frame dowel and elongated hole drilling machine with angle adjustment. Special drilling machine for staircase construction, window construction, and universal applications through pneumatic height adjustment. Angled dowelling and picket drilling can be easily realized thanks to the rotating drilling unit. Motor with pole change, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Motor start with a practical handle switch Precision chuck with two inserts 16mm and M10 thread Table size approx. 1100 x 240mm Linear laser for precise positioning of the workpiece Drilling unit can be rotated 65 degrees to the left and right Pneumatic adjustment of the processing height, dowelling on two levels without adjustment The desired drilling heights can be set for each drilling level using a handwheel and digital counter; the changeover is then carried out pneumatically from the front Cross adjustment approx. 320mm, stepless or in a 12mm grid Drilling stroke approx. 200mm 2 pneumatic workpiece clamps, can be placed at the front and rear of the table 2 swiveling workpiece supports 2 side stops, can also be used as a front support Chassis Dust extraction connection 80mm 4 used but good drill bits 9, 12, 16, 19mm Few paint spots have been touched up, very good condition, see original photos. A used swiveling elongated hole drilling machine in this condition is very rarely available. CE marking Operating manual Dimensions approx. 1200 x 1200 x 1200mm (L x W x H), weight 310kg. Nedsyfta Tspfx Akiolh The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in stock, see "other offers from this seller".

Condition: excellent (used), Year of construction: 2005, bore capacity in steel (diameter) 40.0 / 50.0 mm throat 300 mm bore stroke 160 mm threading M 30 in ST turning speeds 70.0 - 4.000 U/min table: 615 x 430 mm bore spindles - Morse Taper 4 Kurzspindel MK column diameter 145 mm feed 0.1-0.2-0.3-0.4 mm/U distance spindle /table 147 / 688 mm T-slots 2 x 14 x 224 mm engine output 1.8 / 2.9 kW weight 450 kg Machine height 1865 mm Current new price approx. 22.000 euros Special price upon request In well-maintained condition (!!) Nledpfx Aks Afp A Hjieh Features: - Robust pillar drilling machine - INDUSTRIAL GRADE - * Drive: V-belt - VARIO (variable speed) - - Automatic spindle feed * With electromagnetic feed clutch * 4 feed rates: 0.1, 0.2, 0.3, 0.4 mm/rev * Feed overload protection - Infinitely variable speed adjustment * Digital speed display - Tapping (thread-cutting) function - Emergency stop button (front-mounted) - Main power switch (front-mounted) - Original operating manual Included special accessories: - Adjustable machine work light - Tapping attachment with footswitch - Automatic drilling depth control * Includes: drilling depth programming, chip-breaking function, . retract/clearance function (adjustable via digital potentiometer) . digital display (including drilling depth readout) - Fine adjustment for drilling depth and fixed stop * Setting increment: 0.1 mm - 4x anti-vibration machine mounts

Condition: good (used), Nagel Citoborma 280B Paper Drill The unit is in 100% working order. It is one of the latest models. Nsdpfxoz S Upme Akijlh The drilling table is adjustable in all directions (laterally and front-to-back). It features stops for setting the drilling spacing. The installed table is an enlarged version. Additionally, the paper drill is equipped with an automatic table lock that releases after every cycle. Excellent condition. Robust construction – weight: 76 kg. Power supply: 380V. Two drilling heads with an adjustable spacing range of 45–120 mm. Drill bit diameter: 2–20 mm. Stack height: 60 mm. The machine has undergone a full inspection. Includes drill bits, tools, a new cutting stick, and an instruction manual.

Condition: good (used), Hang 114-30/4 Paper Drill Machine The unit is in perfect condition and 100% functional. A top-tier machine in the category of paper drills. This is a currently manufactured model, featuring the most comprehensive equipment configuration available. Equipped with two integrated frequency converters (inverters) for stepless spindle speed adjustment (260 – 1,800 rpm) and smooth table elevation. Rapid drill zeroing/alignment system. The drilling table is adjustable in all planes; the margin (backgauge) setting is controlled via dial indicators. Waste material is directed into an external container. Operated via an electric foot switch. Energy-saving standby mode. Automatic drive belt tensioning. Each drilling head features independent adjustment, allowing for the use of drills of varying lengths. Includes a cooling and lubrication system for the drills. Technical specifications: Number of drilling heads: 4 Drill diameter: 3–10 mm Stack height: 65 mm Drill spacing: min. 36 mm / max. 260 mm Table dimensions: 600 x 480 mm Power supply: 400 V Weight: 400 kg The machine comes with documentation, maintenance tools, and drill bits. Nledpfx Akjz S Un Aoieh

Condition: good (used), Stago PB 2015 Paper Drill Nljdjz S Uwqspfx Akieh The latest model from the manufacturer Stago; this machine comes from the office of a large company. The unit is 100% functional. The drilling table is adjustable in all directions (laterally and front-to-back). It features stops for setting the drilling spacing. The installed table is an enlarged version. Additionally, the drill is equipped with an automatic table-locking mechanism. Robust construction – weight approx. 70 kg. Power supply: 380V. Two drilling heads. Drill bit diameter: 2–10 mm. Stack height: 60 mm. Adjustable spacing between the heads. The drill has undergone a full inspection. Includes drill bits and tools.

Condition: good (used), Nagel Citoborma 111 paper drill The unit is 100% functional and in very good condition. The drilling table is adjustable in all directions (laterally and front-to-back). It features stops for setting the drilling spacing. Robust construction – weight: 35 kg. This is one of the latest Citoborma drill models, currently still in production. Power supply: 230V. Drill bit diameter: 2–9 mm. Stack height: 50 mm. Includes drill bits, a new drilling stick (cutting strip), and an instruction manual. Nsdpfx Akez S Ui Hoiolh Made in Germany.

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 35800DNU8, power of the servo motor: 520 W, input voltage: 230 V, type of input current: AC, pneumatic connection: 6 bar, For sale is a Union Special 35800DNU8 feed-off-the-arm industrial sewing machine, offered as a complete workstation with binder and external puller. This heavy-duty unit is designed for continuous seam operations, edge binding, and reinforcement stitching in denim, workwear, and technical textile production. The feed-off-the-arm construction enables efficient handling of tubular garments such as sleeves and trouser legs. The machine is equipped with a high-quality Efka electronic motor and control system, providing precise speed control, needle positioning, and reliable performance in industrial environments. The unit has been used in professional production and was fully operational prior to factory shutdown. Serviced on 27.02.2026. Key features: • Feed-off-the-arm design for tubular and long seam operations • 3-needle chainstitch configuration (35800DNU8) • Binder/folder attachment for edge finishing • External motorized puller for stable material feed • Efka electronic drive system with precise control • Pneumatic functions for automated operation • Heavy-duty industrial construction Includes: • Union Special 35800DNU8 sewing head • Binder / folder attachment • External puller unit • Efka motor and control system • Industrial table and stand • Foot pedal • Thread stand Nedpfx Aksy Ipy Ajijlh • Pneumatic components Technical details: • Manufacturer: Union Special Corporation (USA) • Model: 35800DNU8 • Machine type: Feed-off-the-arm industrial sewing machine • Stitch type: Chainstitch (3-needle) • Motor: Efka electronic servo motor • Control: Efka control unit • Voltage: 230V • Pneumatic system required Condition: • Used industrial condition • Fully operational prior to shutdown • Serviced on 27.02.2026 • Typical signs of use • Sold as-is, where-is, without warranty Typical applications: • Edge binding • Reinforcement seams • Denim and workwear production • Technical textiles • Long continuous seam sewing Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling and transport

Condition: good (used), Year of construction: 2006, bore capacity in steel (diameter) 55.0 mm throat 300 mm bore stroke 140 mm turning speeds 70 - 2300 U/min Nedpfxez S N D Eo Akislh table: 615 x 430 mm bore spindles - Morse Taper 4 Kurzspindel MK column diameter 145 mm feed 0.10 + 0.30 mm/U distance spindle /table 150 / 735 mm weight 380 kg height of the machine ca. 1.850 mm Current list price: approx. 15,000 euros Special price available upon request Features: - Robust "INDUSTRIE" column drill press * Drive: "VARIO" V-belt - Automatic spindle feed * Feed mechanism: 0.1 + 0.3 mm/rev * Feed overload protection - Stepless speed adjustment * Includes digital speed display - Height-adjustable worktable with 2 T-slots - Right/left rotation of the work spindle - Emergency stop button on the front - User manual (PDF)

Condition: good (used), Year of construction: 2009, bore capacity in steel (diameter) 40.0 mm thread cutting attachment M 30 Nljdsz R D Icepfx Akioh spindle taper MT 4 MK table surface area 1200 x 500 mm turning speeds 50 - 2000 U/min arm length 1050 mm column diameter 220 mm spindle stroke - max. 200 mm feed range 0.08 - 0.50 mm/U distance spindle /table 760 mm weight 2740 kg range L-W-H 2450 x 2450 x 2800 mm Original price approx. 20.000 Euros Special price on request Equipment: - Robust electro-hydraulic radial drilling machine - Sturdy construction ensures vibration-free operation - Compact design with electro-hydraulic quick-clamping system - Infinitely variable speed adjustment (50–316 + 316–2000 rpm) - Digital speed display - Motorized height adjustment of the drill head - Drill head swivels 180° - Arm movable forwards/backwards and swivels horizontally - Clockwise/counter-clockwise spindle rotation - Manual & automatic spindle feed - Large work table with 3 T-slots - 1x heavy-duty machine vice * STANKO IMPORT "200-0225C" * Jaw width: 250 mm * Jaw height: 60.0 mm * Opening width: approx. 300 mm - Thread-cutting attachment - Separate coolant system - Front-mounted emergency stop button - T-slots for mounting on the side and rear of the machine - Operating manual

Condition: used, Year of construction: 2008, machine/vehicle number: 30655, overall weight: 5,500 kg, total length: 2,540 mm, total width: 2,290 mm, total height: 2,340 mm, FICEP P51 - CNC PUNCHING & DRILLING MACHINE FOR FLAT BAR AND PLATES | YEAR 2008 | 800 KN The Ficep P51 is a CNC-controlled punching and drilling machine for automated hole processing of flat bar and plates. Punching and drilling run in a single pass with automatic material feed - saving marking, re-clamping and handling on parts with many holes. CONDITION & HANDOVER Used machine from stock, year 2008, serial number 30655. - Condition and function are confirmed during the viewing or upon request. Njdpfxoz Nyvyj Akiolh - Viewing possible by arrangement (no demonstration under power). - Service and reconditioning before handover by arrangement. FUNCTION & APPLICATION A hydraulic punching unit and an integrated drilling unit process the workpiece in one pass. A carriage with hydraulic, self-adjusting grippers and ball screw drive positions the material under CNC control (Ficep MINOSSE). Processes: punching, drilling, marking, countersinking and tapping. Typical applications: structural steelwork and connection technology as well as the fabrication of beams, brackets and frame structures with a high share of holes. TECHNICAL DATA - Manufacturer: Ficep | Model: P51 | Year: 2008 | Serial number: 30655 - Machine type: CNC punching and drilling machine - Punching force: 800 kN (approx. 80 t) | Punching units: 1 - Max. punching diameter: 46 mm | Material thickness (punching): 3-25 mm - Drilling units: 1 | Spindle power: 7.5 kW | Max. drilling diameter: 28 mm - Plate width: 100-500 mm | Plate length: from 100 mm, not limited by design thanks to roller conveyors - Workpiece weight: up to 100 kg (standard) / up to 250 kg (reduced positioning) - Travel: X 1,000 mm | Y 500 mm | Positioning speed: 20 m/min - Carriage drive: ball screw | Clamping: hydraulic grippers - Control: Ficep MINOSSE CNC - Frame: one-piece steel C-frame with integrated hydraulic unit, electrics, pneumatics and CNC unit - Machine dimensions (L x W x H): approx. 2,540 x 2,290 x 2,340 mm | Machine weight: approx. 5,500 kg SCOPE OF DELIVERY - 1 x Ficep P51 main machine (one-piece steel C-frame) - 1 x punching unit (800 kN) - 1 x drilling unit (7.5 kW) - 1 x carriage with hydraulic grippers and ball screw drive - 1 x Ficep MINOSSE CNC control unit - 1 x hydraulic unit (integrated in the machine frame) - 1 x safety light curtain LOGISTICS & LOCATION Location: Ulft (Netherlands), close to the German border. Dismantling, transport, installation and commissioning can be carried out by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) specializes in reconditioned Ficep structural-steel machinery - from sawing and drilling lines and profile drilling machines to plasma cutting systems. Further Ficep machines on request. CONTACT / INQUIRY Arrange a viewing | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Condition: good (used), Spindle diameter: 75 mm Spindle taper: MK 5 Table clamping surface: 900 x 710 mm Travel: X-axis (cross): 850 mm Y-axis (vertical): 750 mm Z-axis (longitudinal): 1050 mm W-axis (quill): 600 mm B-axis (table): 360° Table load capacity: approx. 3500 kg Infinitely variable spindle speed range: 20 – 1500 rpm Feed range: yes Rapid traverse: yes Drive power: 12 kW Njdpfxsxtu D Us Akiolh Dimensions (L x W x H): 3950 x 2200 x 2200 mm Weight: 5800 kg Accessories / Special features: • 3-axis digital readout, manufacturer FAGOR • Full machine control via swiveling operator panel • Machine bed cast in one piece • Infinitely variable spindle speed, adjustable via servo drive with potentiometer • Feed + rapid traverse • Coolant pump • Emergency stop switch Includes additional spindle mount DIN 55027 Gr. 8 on the drilling spindle, e.g. for mounting a 3-jaw chuck or a faceplate At the end of the machine bed, a table guide with drive is mounted to accommodate a tailstock. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund – Wambel / Germany

Condition: new, Benchtop drill press OPTIMUM D 23 Pro-Set OPTIdrill - Exhibition model - ----- Technical data ----- Nlede Aaz Ttjpfx Akijh Number of speeds: 12 steps, Speed range: 200 - 2,440 rpm, Spindle stroke: 80 mm, Arm reach: 180 mm, Table size: 280 x 245 mm, Max. drilling capacity in steel: 25 mm, Motor: 750 watts, Column diameter: 73 mm, Dimensions (L x W x H): 615 x 330 x 1,015 mm, Weight: 63.5 kg, Spindle mount: MK 2 Benchtop drill press with V-belt drive - Industrial motor - User-friendly safety switch according to IP 54 - Digital depth-of-drill and speed display integrated into the housing - Separate emergency stop switch - Precision-bored spindle - Safety electrical system in 24 V DC - Guaranteed concentricity accuracy less than 0.02 mm, measured in the drill chuck - Drilling spindle with precision ball bearings - High-quality quick-change drill chuck - Depth stop - Precisely machined, stable drill table with diagonally running T-slots and a surrounding coolant channel - V-belt cover with safety switch - One-piece, die-cast aluminum spindle lever with soft-grip handles - Large, height-adjustable protective shield with safety switch - Heavy-duty design of the entire machine - GATES quality belts - Right/left rotation -- Scope of supply -- Quick-change drill chuck 1 - 16 mm Morse taper MK 2 / B16, T-slot wedges Special set including machine vise BMS 100 - New exhibition model -

Condition: new, Year of construction: 2023, Alzmetall Alztronic i16 table drilling machine 5" touch display Condition: new Call us and ask us about special discounts or send us your request by email with your contact information and we will get back to you. 5" or 7" display with scratch-resistant glass surface - Optimal readability for the operator - Simple and uniform operator guidance using pictograms - Manual input of spindle speed - target value - Speed display - actual value - Integrated drilling depth display with touch zero point transfer (drilling start) - Virtual drilling depth scale in the display Nlodpfx Asy S Atkjkioh - Machine status displays and warnings in the display (safety)• Main switch, lockable - Right and left rotation through contactor control - Control voltage 24 V - Service information - Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Spindle braking function - ALZTRONIC only (safety) - Adjustable display timeout Standard Equipment: -AC motor 230 V, 50 Hz -Infinitely variable speed adjustment -Reversing switch for right-left rotation -Spindle protection with electrical protection -On/off button with lockable emergency stop flap -Connection plug, cable length 3m -Paint: structural paint light gray RAL 7035, anthracite RAL 7016, white aluminum RAL 9006 Drilling capacity steel E335 (St 60) 16 mm Thread cutting steel E335 (St 60) M 12 Drill chuck taper MK 2 Spindle stroke 80 mm Thread 190 mm Column diameter 65 mm Manual feed Drill head height adjustment by handwheel Net weight approx. 83 kg Infinitely variable speed adjustment Motor 0.54 kW Spindle speed rpm 100-2000 Optional: - Röhm Supra drill chuck 1-13mm or 3-16mm - Alzmetall under-table For self-collection. Forklift available. Shipping also possible. Errors, changes and prior sale reserved. Other Alzmetall table drilling machines and pillar drilling machines always in stock!

Condition: new, As a machine dealer in Offenburg, we have new and used ALZMETALL table drilling machines and column drilling machines in our range. You can find an overview of the drilling machines on our homepage. If you have any questions, just call us. Here we offer the new series of ALZMETALL pillar drilling machines with TOUCH display: ALZMETALL AX3 iTRONIC-V pillar drilling machine Condition: NEW Standard equipment 7“ TFT - LCD display with touch function: - Manual input of spindle speed setpoint - Speed display actual value - Integrated drilling depth display with touch zero point transfer - Virtual drilling depth scale in the display Nljdey S Auuspfx Akioh - Machine status displays and warnings in the display - Service information - Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Continuous speed setting using adjustment lever - Spindle protection with electrical protection - Three separate buttons for clockwise rotation - anti-clockwise rotation - stop - Mushroom push button (latching) for EMERGENCY STOP - Lockable main switch - Clockwise and anti-clockwise rotation via contactor control - Control voltage 24 volts - Protection class IP 54 - Paint finish: DD structural paint signal white RAL 9003, PANTONE 7545c, black Technical data: Manufacturer: ALZMETALL Type: AX 3 iTronic-V Drilling capacity steel E 335 (St 60) (mm): 40 Thread cutting steel E 335 (St 60): M 24 Thread cutting cast iron EN-GJL-200 (GG 20): M 30 Short spindle: MK 3 Spindle stroke (mm): 120 Usable projection (mm): 293 Column diameter (mm): 115 Machine table (mm): 515 x 360 T-slots (mm): 2 x 14 x 224 Distance spindle-table (mm): 117 / 701 Feed: 0.1 + 0.2 mm/rev Machine height (mm): approx. 1840 Drive: stepless Speed range (r/min): 160 - 2250 Motor (kW): 1.45 / 1.9 Weight (kg): approx. 270 Special equipment included: - Foot switch in addition to the thread cutting device Other options can be retrofitted: - LED machine light - Coolant system B - Technology calculator in the display - Maximum drilling depth display Optional accessories: - Machine vice size 3/125mm BB type BON3 - Machine vice size 4/160mm BB type BON4 - Keyless drill chuck Supra 1-13mm or 3-16mm MK3 Available at short notice. For self-collection. Forklift available. Shipping also possible Subject to errors, changes and prior sale. Not the right machine? Then please contact us.

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: black, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.510 - EURO 6, optionally with F905 incl. L436 Fly-Jib and V20 winch!!! Tipmatik - Automatic transmission 8x4 Hydrodrive Three steered axles STEERING / LIFT axle Front outriggers approx. 14,000 KG Flatbed body with sideboards 6200x2550x600 mm Step plates Diamond plate flooring Removable sideboards 9 x LED lights Overwidth markings extendable to 3500 mm width Start/Stop Rotating beacon 8 x rung pockets 6 x lashing points 6500daN Toolboxes Trailer hitch Storage compartments Storage boxes 20 ft container locking Perforated side profile lashing points 2500daN Crane: FASSI F905R.2.7, with fully hydraulic 4-point outriggers, with 6 hydraulic extensions on the main arm, Fly-Jib L436 with 6 hydraulic extensions, rope winch, cross - radio remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), accessories complete for winch operation, foldable roller, quick coupling between main arm and Fly Jib and more... TECHNO series!! NEW crane model Slew range endless All hydraulic cylinders double-acting Piston rods hard chrome plated Double knee lever system with PROLINK (over-extendable boom up to 10°) Electronic overload shut-off device with FX800 FASSI stability control FSC-S/2 incl. LMB II Emergency stop, as well as optical alarm (90% and 100%) Pressure relief and load holding valves XF system (Extra Flink) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS radio remote control with linear levers and display of pressure range (in bar and %) and 90% + 100% warning in the display Danfoss D900 control unit with 4 control valves mounted on the crane column Emergency control for crane operation High-pressure filter is supplied pre-assembled Nodpfxo Ad Swkj Akijlh sep. hydraulic tank (260l) with filter and oil cooler mounted on the crane base hydraulic outriggers, on both sides hydraulically extendable, outrigger width 10.00m, outriggers operable via radio Standard color RAL 3020 traffic red - all cylinders painted black IMC - System (Integral Machine Control) and ADC (Automatic Dynamic Control) = Load-dependent speed control Load hook and connecting lugs (short/500mm) Driving position: folded across the direction of travel Note: Pay attention to the on-board voltage / 12V or 24V, standard 24V" FASSI stability control FSC-TECHNO Fassi V7S radio maxi - 8 linear levers Proportional control unit » for the outriggers 180° hydraulically swiveling support legs / » on both sides Preparation for operation with variable pump » (LS) Control system for 2 additional functions with » 2 hose connections / hxp-techno Additional boom (Jib) L436, 6-fold » hydraulically extendable Jib Double Power (JDP) Multi-coupling with cable duct » for Jib mounted for 2 functions Control system for additional function » rope winch Rope winch type V20 - 2,000daN, 60m rope » (12mm) with LMB and mechanical Permanently mounted rope guide for operation with additional boom (Jib) AWC - (Automatic winch Control) for crane » Automatic winch control AWC - (Automatic winch Control) for JIB » Automatic winch control Work light operable via display or radio 1 LED work light mounted on the boom » 1 LED work light mounted on the Jib » LED for 2 outriggers, not mounted » (crane) LED for 2 outriggers, not mounted » (additional support beam) Electric rotary distributor with 14 » slip contacts 1 zinc primer from 720RA to F820RA "Zinc primer for JIB ""L42""" Extra charge for Dinitrol application (cavities) Extra charge for stainless steel screws and stainless stee

Condition: new, power: 397 kW (539.77 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,800 mm, loading space width: 2,480 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Volvo FH 540 8x2 with F990RA.2.28 L616 V30 - New model - Electro-hydraulically steered tag axle, single-tire configuration - FH Sleeper cab - Wheelbase 5600 mm - Exhaust emissions compliant with Euro 6 Stage E, - with SCR, particulate filter, and exhaust gas recirculation - Diesel engine 12.8 l, 540 hp, 2850 Nm - Volvo Engine Brake+ (VEB+) engine brake. - Braking power 540 hp (D13K) - Complies with ADR braking regulations - I-Shift AT2612F, automated 12-speed transmission (direct gear), max. input torque: 2,652 Nm - Liftable axle - Rear axle RSS1370A, single reduction, 13 t axle load, GVW 70 t - AA tires 315/70R22.5 - Drive axle ratio 2.85 : 1 - Driver comfort package - Air conditioning with automatic temperature control and sun sensor - Info and media package with navigation - Radio reception: AM/FM - USB port, 3-way - 8 speakers - High instrument cluster: digital driver information display, 12 displays with 4 views - Second driver information display, 9-inch touchscreen color display - TOMTOM navigation system - AGM batteries, 2 x 210 Ah - Battery indicator on the display (Volts, Amps, and battery status with warning function) - Main switch on the chassis - 330 L aluminum tank on the right, D-shape, 710 mm high, 830 mm long - Fuel tank, normal ground clearance - AdBlue tank on the left, usable capacity 64 liters - Lockable fuel tank cap - Fuel tank filler neck, anti-splash protection - Exhaust outlet to the rear - 2 foldable chock blocks, transport mounting - Rear and side marker lights - Trailer coupling with D-value = 190 kN for G-150/G-260 hole pattern - Trailer coupling to frame end 85 mm - Rear frame length 4395 mm, measured from drive axle/1st drive axle - Rockinger 400 G-150 trailer coupling (Note D-value/max. trailer load!) - Electrical connection for semi-trailer/trailer, 15-pin - Trailer/semi-trailer connection Duomatic - Trailer connections in the center - Stationary trailer brake (active up to 7 km/h) - Underrun protection rear, aluminum, fixed, thin - 4x front axle tires 385/55R22.5 Continental, Hybrid HS3+, Rolling resistance class: C, steering axle - 4x AA tires 315/70R22.5 Continental, Hybrid HD3, rolling resistance class: C, drive axle - 2x tag axle tires 385/55R22.5 Continental, Hybrid HS3+, Rolling resistance class: C, tag axle - Venting pump, electric - Transmission/I-Shift operation via control unit on the driver's seat - I-Shift driving modes: Standard, Performance, and Economy - Autoreturn in Economy mode - No manual intervention in automatic mode, without kickdown - Cruise control - Transmission oil cooler, basic, water/oil Nlsdpfx Aksywfxyjish - Air compressor 2-cylinder, 1100 l/min, for vehicles/combinations with increased air demand - Air intake at the front with a normal air filter - Alternator 150A/4200W - Exterior noise according to ECE R51.03 Phase 2, with low-noise certificate and L-label - Closed crankcase ventilation - Double fuel filter on the engine, large for poor fuel quality, e.g. in Eastern Europe - Fuel filter with water separator - Auxiliary drive (medium-fast PTR-DM), gearbox side, connection: 1 DIN rear for pump - Auxiliary drive on the gearbox, max. power 600 Nm - Dynamic equipment: seats in fabric, side vinyl (blue/dark blue) with interior in gray fabric - Driver's seat comfort, air-suspended, heated, seatbelt in the seat - Passenger seat standard, air-suspended - Lower bunk, foldable, 2000x815/740/660 mm (middle, top, bottom) with safety net - Cab heater, 2 kW - Storage space under the bunk - Cool box with f

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, input voltage: 400 V, total length: 14,000 mm, Equipment: documentation/manual, Alzmetall AB 26 drilling line with MKH CNC positioning and roller conveyors (2006) For sale: complete drilling line for profiles and strips, built around an Alzmetall AB 26 column drilling machine with an MKH CNC positioning system. The machine has been used in our production and is being sold due to workshop restructuring. Specifications: • Column drilling machine: Alzmetall AB 26, manufactured in 2006 • Digital display of spindle speed and drilling depth • Automatic spindle feed with depth adjustment • Coolant lubrication system • MKH CNC control with positioning carriage and gripper on guide rail • Pneumatic work piece clamping • Infeed and outfeed roller conveyors, total length approx. 14 m • Separate control cabinet with emergency stop and main switch • Connection values: 400V / compressed air 6-10 bar Condition: operational, can be demonstrated while running. Manual available. Location: Waalwijk, Netherlands Availability: immediate / by arrangement Dismantling and loading: [by arrangement / buyer arranges transport / we assist with loading] Nljdpsz I Tahofx Akioh Price: € 9,000 excl. VAT Inspection by appointment is possible.

Condition: good (used), Year of construction: 2000, Donau Danuflex 145 Donau Danuflex 145 high-speed radial drilling machine, year of manufacture 2000, in SUPER condition CE compliant!! Technical data: Year of manufacture: 2000 Drilling and threading capabilities Drilling capacity in steel: approx. 42 to 45 mm Threading: up to M36 Tool holder / spindle: MK 4 Nedpfsz Rwpyox Akijlh Spindle speed: 15 to 2,800 rpm (infinitely variable) [1, 2, 3] Travel distances & work area Outrigger travel: 1,050 mm Drilling radius: min. 540 mm / max. 1,590 mm Quill stroke: approx. 200 to 220 mm Column stroke (W-axis): approx. 450 mm Column diameter: 195 mm Table & dimensions Work table: typically approx. 1,200 x 750 mm with 5 T-slots Work table height: approx. 905 mm (ergonomic design for standing operation) Feed: automatic / stepless quill feed with electromagnetic feed clutch Equipment (standard): Threading device, hydraulic clamping for outrigger and lifting column, central lubrication and machine light Accessories and equipment: Several work tables About the machine: Offered is a Donau Danuflex 145 high-speed radial drilling machine. This high-speed radial drilling machine is in very good original condition. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Up to 3 fixed machining stations ensure maximum flexibility in the machining of workpieces, both large and small, as well as very long parts. Swivel tables allow the machining of angled bores. Large travel distances and workpiece heights up to 1500 mm are ensured. Effortless, simultaneous positioning to a drilling position in 3 axes. A self-centering spindle head positions itself precisely in centering bores. Concentric countersinking is achieved by self-centering countersinks in the bore. The guides are regularly lubricated by the central lubrication system. The Donau has been mechanically and electrically tested by us. Take the opportunity to inspect and try out the Donau on site under power. You can find more drilling machines from well-known manufacturers on our website.

Condition: good (used), Year of construction: 1999, functionality: fully functional, power: 2.25 kW (3.06 HP), input voltage: 400 V, input current: 6 A, input frequency: 50 Hz, type of input current: AC, tool diameter: 40 mm, spindle mount: MK 4, drilling depth: 130 mm, actuation type: manual, rotational speed (max.): 2,380 rpm, rotational speed (min.): 65 rpm, total width: 685 mm, total length: 1,030 mm, total height: 1,900 mm, throat depth: 300 mm, table width: 600 mm, table length: 460 mm, overall weight: 410 kg, Equipment: documentation/manual, rotational speed infinitely variable, Column drilling machine SerrMac TCO 40L - Year of manufacture: 1999 - Good condition considering its age - Work table: 600 (width) x 460 (depth) mm - Motor: 2.25 kW - Spindle speed: 65 – 2,380 rpm – 2 speeds via gearbox, infinitely variable within each speed - Mechanical drill drive with feed rate adjustment possible Nljdpfez Ailrsx Akieh - Thread cutting device - LED table lighting (retrofitted) - Sturdy machine with a robust column - Weight: 410 kg - Fully functional - Tool holder, clamping devices, and a vise can be purchased separately, depending on the pricing - Machine can be inspected while powered on This offer is non-binding. Subject to prior sale. No online sales. Sale is only to commercial customers after inspection and acceptance on-site. Due to the age of the machine, the sale is made without any warranty. Pickup only (EXW) - no shipping.