Used Deephole boring machines for sale (70)

Degen UTB 1000 H CNC

Call

Condition: good (used), Year of construction: 1999, Manufacturer: DEGEN Type: UTB 1000 H CNC Control: HeidenHain TNC 124 Year of construction: 1999 Specifications: Metric Metric US Standard Max. Drill Ø steel Lryznjpnjv 5 - 32 mm Drilling depth 1000 mm X - axis 1300 mm Y - axis 600 mm Z - axis 1000 mm W - axis 500 mm Table load 5000 Table dimensions / L x W or ø 1400 x 800 mm Spindle holder Sk-50 Mk Spindle power 10 kW Spindle speed 0 - 4000 Rpm Dimensions (estimate) length 4000 mm width 3500 mm height 2800 mm weight 5500 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

more

Listing

Lüneburg

1,237 km

CNC - deep hole drilling machine

Toshiba 757

Call

Condition: good (used), Drilling depth 8.000 mm R9to8lz Largest drilling diameter 250 mm Bed length to faceplate 25.000 mm Slide width 1.000 mm Drilling slide 2.400 mm Boza slide 1.800 mm face plate 2.000 mm Swing diameter over bed 2.000 mm Max. diameter steady rest approx. 1.800 mm 2 x vibration damper Extensive scope of delivery

more

Listing

Halberstadt

1,309 km

TIBO M10-250NC

Call

Condition: used, Year of construction: 2002, Ref. -No.: 10142 Manufacturer: TIBO Bioa7vxswi9 Type: M10-250NC Year of construction: 2002 Type of control: CNC Control: Siemens Sinumerik 802D Storage location: Halberstadt Country of origin: Deutschland Drilling diameter: 1-13 mm Bore Depth: 250 mm Drilling spindle speed: 11.000 RPM X-Travel: 300 mm Y-Travel: 210 mm Z-Travel: 250 mm Machine weight: 2,5 t Further information: - With equipment

more

Listing

Mamer

1,073 km

CNC Deephole Drilling Machine

Wohlenberg B 1000

Call

Condition: excellent (used), Year of construction: 2014, Control: Siemens 840-D SL 0cqsxjhf Max. workpiece diameter: 1000 mm Max. drilling diameter in full: 250 mm Max. drilling length: 6000 mm Max. workpiece weight: 10 tons Track length: 14 meters Main spindle drive: 65 Kw Drill spindle drive: 37 KW Drilling spindle speed: up to 1120 rpm Bed track width: 520 mm Machine weight: approx. 35 tons

more

Listing

Oisterwijk

931 km

CNC Deep hole drilling machine

Ixion TL1004

Call

drilling depth: 1,000 mm, motor power: 5,500 W, workpiece weight (max.): 2,000 kg, Condition: excellent (used), Year of construction: 2004, machine/vehicle number: 950344, Gun drilling machine Control Mitsubishi 530 Drilling capacity in steel 32mm Speed 100-4000 RPM Milling is also possible with the machine Spindle taper ISO 40 Din 69871 D7sygps Can be demonstrated under power

more

Listing

Schwabach

1,411 km

CNC deep hole drilling machine

IXION TL 1001

Call

drilling depth: 1,000 mm, Condition: good (used), Year of construction: 1997, Seller = first owner and has used the machine in his own tool shop ! No contract manufacturing ! A large number of drilling tools are also supplied. . Machine is still at the owner's premises in Bavaria / Franconia and can still be demonstrated there. CNC-control MITSUBISHI M3 1 CNC axis, Z = drilling movement Tool holder SK 40 Bikmnwat98c Coolant system 50 bar , 25 l/min Spindle speeds 100 - 4000 rpm .

more

Listing

Neuss

1,043 km

SFT / GILDEMEISTER B4B-4000-CNC

€115,000

Call

Condition: good (used), Make: SFT / GILDEMEISTER, type: B4B-4000-CNC, year of manufacture: 1986, PLC control Siemens, drilling depth max. 4,000 mm, circulation Ø max. 800 mm, max. drilling capacity solid drilling Ø 160 mm, core drilling Ø 300 mm, boring single-edged/multi-edged Ø 400 mm, drilling spindle drive 75 kW, spindle bore 120 mm, drilling spindle speed range 1-2.000 rpm, feed range 1-2,000 mm/min, rapid traverse 4,000 mm/min, headstock workpiece rotation 19 kW, speed 2-50 rpm, spindle orientation, steady rest, coolant system, chip conveyor, hydraul. Vibration damper, revision in 2010 Zfbrbq7u +++ Attention: this machine is part of an online auction! +++

more

Listing

Bruchsal

1,259 km

MEWAG - IXION TL 500

Call

Condition: good (used), Deep hole drilling machine / MEWAG - IXION TL 500 -Drilling depth approx. 500mm -table size 800x450mm -Table rotatable/angle adjustable -Drilling stroke / by hand -Drill chuck -Various tools Dimensions: LxWxH 1.6x0.8x1.6 meters Weight approx. 1250 kg 2juewbf Errors / input errors excepted

more

Listing

Hattingen

1,070 km

TIBO tibo. E 40-1-1000

Call

Condition: used, Year of construction: 2018, number of spindles 1 Solid drill diameter 5 - 40 mm bore depth 1.000 mm spindle motor 17 kW number of spindle speeds 200 - 6.000 U/min feed 10 - 500 mm/min rapid traverse 3.000 mm / min D8j0opx Dimensions (L x W x H) 5.100 x 2.000 x 2.000 mm weight of the machine 6.200 kg Deep hole drilling machine | TIBO - tibo. E 40-1-1000 The machine is in a very well-maintained condition. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: tibo E 40 1 1000 | tibo E40

more

Listing

Wien

1,813 km

Deep Drilling Milling Center

HETO 2000 Power

Call

Condition: used, Year of construction: 2005, core drilling diameter max. 6-30 / 6-80 mm bore depth 1500 mm swing diameter mm Control Fagor Upilzksh0 travel -x axis 2000 mm travel -y axis 1200 mm travel -z axis 850 mm travel -w axis 1550 mm table-size 2100x1300 mm table load 20 t drive of main spindle 16 kW spindle turning speed range 4500 U/min tool taper Iso 50 total power requirement 30 kW weight of the machine ca. 23 t dimensions of the machine ca. 7x5,5x3,2 m

more

Listing

Nordrhein-Westfalen, Deutschland

1,100 km

BUCK - UHLY TB 1050 TNC 620

€42,000

CNC deep hole drilling machine

Call

Condition: excellent (used), Year of construction: 2015, Drilling diameter 3-25 mm in ELB Drilling depth in one pass (mm) 810 with re-setting 1,200 Tapping up to M20 - larger by milling Tool changer manual spindle holder SK 40 altv. HSK 63 drive power 5,5 kW / ED 100 Travel X (longitudinal) 1,050 mm Qbrmzmb0 Travel Y (vertical) 800 mm table load up to 2.500kg table size 1.000 x 1.500 mm CNC rotary table 0-360° manual

more

Listing

Weihenzell

1,381 km

BUCK TB 1000 CNC

Call

Condition: good (used), Year of construction: 2012, 4 axis coordinates deep hole drilling machine BUCK TB 1000 CNC Equipped for deep hole drilling and milling Year of construction 2012 Drilling range 4-32 mm Drilling depth 1050 mm in one go X travel 1000 mm Y travel 650 mm W travel 450 mm Fa23xzz9l B-axis 1500x1000 mm (manual 0-360 degrees) Table load 2,500 kg Spindle speed 0-6000 rpm. Main spindle drive 7.5 kW Heidenhain TNC 620 incl. handwheel chip conveyor High pressure coolant system 0-100 bar 2-fold support bezel

more

Listing

Mörsdorf

1,393 km

CNC Boring lathe Ø 1600 x 12.000 mm

TBT Tiefbohrtechnik T 10-250 gesteuert

Call

Condition: used, Year of construction: 1989, Deep hole drilling machine make TBT Tiefbohrtechnik type T 10-250 machine-no. 418.311.215, year of construction 1989 with control SIMATIC S5 technical data: max. drilling depth 250 mm table size 420 x 780 mm drilling range steel ST 60 full drilling max 16 mm Bgcgoqwahs7 reaming max 20 mm drilling method ELB (single lip drilling) Number of drilling spindles 1 Main spindle drive 2,6/ 3,2 kW Speeds 1020 - 4400 rpm 1960 - 2950 rpm 2950 - 4400 rpm 4400 - 8950 rpm Filter plate gap filter 60 l/min cooling lubrication system 670 l deep drilling oil electrical connection 380 V, 15 kW outer dimensions of the plant incl. SS L x W x H 3850 x 1800 x 2000 mm weight approx. 2200 kg with - control SIMATIC S5 115 U ELGO 85 P - separate switch cabinet - internal cooling - various single lip drills (see photos) - workpiece counter - coolant system - filter - central lubrication unit used, in good condition SPECIAL PRICE ex stock Mörsdorf

more

Listing

Toruń

1,783 km

deep-hole boring machine

IXION IA1TLF-660

€27,000

EXW ONO plus VAT

Call

Condition: good (used), Year of construction: 2004, machine/vehicle number: SN 950412, Functionality: fully functional, CNC deep hole drilling machine, prod. by Ixion, type IA1TLF-660, year of manufacture 2004, SN 950412, NC rotary table, compact belt filter system, prod. by Resy, type KWF452/500, cooling and lubrication unit, control, prod. by Siemens, type Sinumerik Bike3jihvnc

more

Listing

Babberich

984 km

VDF WOHLENBERG PB4-1600

Call

Condition: good (used), Year of construction: 1991, Deep hole drilling machine VDF Wohlenberg - PB4 - 1600 MACH-ID 7759 Make: VDF Wohlenberg Type: PB4 - 1600 Control: R&D MTC 4 Year: 1991 2007 New R&D CNC MTC 4 ( Open Loop Heavy Duty Machining) New wire / cable / engines / measuring systems Jogging mode with deep hole drilling modus Boring cyclus with return pulling and pause positioning Camera function visulising drilling proces Equipped with: Drilling boring shaft 178 / 238 / 346 / 500 mm (threading connection) Steady rest for diameter 300 / 480 / 760 / 1050 mm Drilling head BOZA Pull Boring Drilling head BOZA BTA Drilling Drilling head BOZA Counterboring Specifications Metric US Standard Max. drill Ø steel 600 mm Drilling depth 12000 mm Table load 63 Ton supported Power on spindle 129 kW Speeds / ranges 355 Rpm Dimensions (Estimate) Length 38000 mm Width 5000 mm Height 3200 mm Weight 200000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Share on Downloads 2007 New R&D CNC MTC 4 ( Open Loop Heavy Duty Machining) New wire / cable / engines / measuring systems Jogging mode with deep hole drilling modus Boring cyclus with return pulling and pause positioning Camera function visulising drilling proces Equipped with: Drilling boring shaft 178 / 238 / 346 / 500 mm (threading connection) Steady rest for diameter 300 / 480 / 760 / 1050 mm Drilling head BOZA Pull Boring Drilling head BOZA BTA Drilling Drilling head BOZA Counterboring Max. drill Ø steel:600mm Drilling depth: 12000mm Table load: 63 Ton supported Power on spindle: 129kW Speeds / ranges: 355Rpm Length: 38000mm Width: 5000mm Height: 3200mm Weight: 200000kg Working Capacity Boring / Drilling capacity: BTA Boring 315 mm Pull Boring 50 - 630 mm Counter boring 800 mm Oil tank capacity 22.000 L Capacity 1300 L/Min Power 90 kW Feed rate 3 - 3000 mm/Min 2007 New R&D CNC MTC 4 ( Open Loop Heavy Duty Machining) New wire / cable / engines / measuring systems Jogging mode with deep hole drilling modus Boring cyclus with return pulling and pause positioning Camera function visulising drilling proces Equipped with: Drilling boring shaft 178 / 238 / 346 / 500 mm (threading connection) Steady rest for diameter 300 / 480 / 760 / 1050 mm Drilling head BOZA Pull Boring Drilling head BOZA BTA Drilling Drilling head BOZA Counterboring Max. drill Ø steel:23.622inch Becqbq0qz2w Drilling depth: 472.44inch Table load: 63 Ton supported Power on spindle: 129kW Speeds / ranges: 355Rpm Length: 1496.06inch Width: 196.85inch Height: 125.984inch Weight: 441124lbs Working Capacity Boring / Drilling capacity: BTA Boring 315 mm Pull Boring 50 - 630 mm Counter boring 800 mm Oil tank capacity 22.000 L Capacity 1300 L/Min Power 90 kW Feed rate 3 - 3000 mm/Min Working Capacity Boring / Drilling capacity: BTA Boring 315 mm Pull Boring 50 - 630 mm Counter boring 800 mm Oil tank capacity 22.000 L Capacity 1300 L/Min Power 90 kW Feed rate 3 - 3000 mm/Min

more

Auction

Deep hole drilling machine for valves

TBT BW 250 S-1-2000

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 106 369-11, Functionality: fully functional, Suitable for deep drilling and milling - Tools and long deep drilling tools can be changed fully automatically TECHNICAL DETAILS Dl79h7 drilling diameter: 3 - 65 mm number of spindles: 1 Control: Siemens Sinumerik MACHINE DETAILS total power requirement: 45 kW weight: 45 t

more

Listing

SAMAG Machine Tools GmbH TBM1-roto 200.4

Saalfeld/Saale

1,373 km

SAMAG Machine Tools GmbH TBM1-roto 200.4

€329,000

Deep hole drilling machine /deep hole drilling rig

Call

Condition: as good as new (ex-display), Year of construction: 2020, Machine description One-piece machine bed in stable, torsion-resistant welded steel construction with fixed drill bush holder and integrated chip sluice • Oil return and chip removal through chip lock • Chip sluice with Makrolon disc • Linear roller guides and ball screws for spindle and tailstock slides • Ergonomic and safety-oriented machine casing • Machine status light (green / yellow / red) • Workpiece positioning by controlled tailstock Clamping of the workpieces in clamping devices with collets (from Geiger & Haag) • Siemens 840 D SL CNC control for drilling axis (Z), tailstock axis (W) and main spindle • Electrical control cabinets with control cabinet temperature control without plug cabinet • Individual drives for the drilling spindles 1 CNC-controlled headstock/drilling axis (Z-axis) 1 CNC-controlled tailstock axis (W-axis) • All axes are driven by digital NC servomotors • Deep drilling technology programs for the valve • Pressure relief flap • Flushing gun for manual cleaning of the workpiece and tool side • Workpiece handling according to customer requirements • Central lubrication for Z and W axis • No coolant tank included • No coolant cooling unit included • With pulsator for breaking chips Technical specifications Drill diameter range 1.5 - 12.50 mm max. drilling depth in one go max. 200 mm Drill feed max. 5 m/min rapid traverses Headstock Z-axis 10 m/min Tailstock W axis 10 m/min Spindle distance 160 mm Drive AC main spindle drive per spindle (belt drive) at 100% ED, S1 3.3 kW at 40% ED, S6 5 kW Spindle speeds directly programmable 1.600-16.000 rpm Main spindle similar to VDI 3208, with hydraulic expansion chuck • Tool holder Ø 10 x 60 mm • HSK 50 spindle interface • Internal coolant supply • Manual tool change Control Siemens 840 D SL • Color flat display with plain text display (touch) 15.6" • User interface in English • Tool monitoring by querying the torque of the main spindle • Digital drive control • USB interface • Deep drilling technology programs • Hard disk • Conversational Programming • Graphic machine status display Process monitoring (4-spindle) Tool breakage monitoring for each spindle Takes place by querying the torque of the main spindle and query the Z-axis load (drilling feed) Coolant pressure control Monitors the coolant pressure during the drilling process, in the event of a chip jam or if there is a lack of coolant, the drilling process will be in accordance with the specified limit values interrupted to avoid damage to the tool and/or workpiece. Torque and coolant pressure can be viewed on the process monitoring screen be presented and evaluated. If the specified limit values are exceeded, the drilling process is automatically interrupted. Workpiece clamping • consisting of 4 chucks on a base plate • the clamping device moves in the W axis for workpiece assembly, the clamping takes place in the chuck, then back into the drill bush • The clamping is initiated via a clamping unit by installed plate spring packages • the clamping can be released hydraulically Workpiece details • Preparation for valves with bore from stem to disc Rfalr

more

Listing

Gussago

1,583 km

Deephole boring machines

MOLLART Drill Sprint 500 LD500

Call

Condition: used, machine/vehicle number: A3010996, Mollart Sprint 500 P7bm3sat0 deep hole drilling machine Fanuc Power Mate control Max L = 500mm Dia 20 mm Spindles: 2 Spindle rotation: 10000 RPM 100 RPM counter spindle rotation Max pressure 100 BAR The machine can be inspected under power in our warehouse in Gussago BS. machine tools Deep hole drilling is the machining of holes with a relatively large depth to diameter ratio, whereas normal drilling techniques produce holes where the depth is rarely more than five times the diameter (5 xD). In deep hole drilling the ratio may reach 150:1, and any hole deeper than ten times the diameter (10 xD) should certainly be considered a deep hole, requiring a specialized drilling technique. Deep hole drilling can employ various machine set-ups: rotating workpiece, rotating tool, or both tool and workpiece rotating. The most common, however, is for the workpiece to rotate, while the tool supplies the linear feed movement.

more

Listing

LOCH TB 2-11/300/2 (Tiefe 300 mm) Siemens St.

Mörsdorf

1,393 km

LOCH TB 2-11/300/2 (Tiefe 300 mm) Siemens St.

Call

Condition: used, Year of construction: 1991, Deep hole drilling machine /deep hole drilling rig make LOCH type TB 2-11/300/2 make # 182-300-1970, year of construction 1991 Technical data: Drilling depth with plunging spindle max. 300 mm workpiece diameter/ full drilling range in steel 4 - 18 mm number of spindles 2 Drilling system ELB drilling method rotating tool counter-rotating workpiece working stroke, full + reaming max. 1000 mm center height 249,9 mm main spindle speed 96 - 2500 rpm. speed steps 4 feed stepless 0 - 1000 mm/min rapid traverse forward + backward 6 m/sec. tapping feed 60% spindle adaptor DIN 55022 size 5 Bgcdjdg28i3 working pressure 200 bar Motor power main drive 15/19 kW Engine power counter-rotating walking stick 5,5 kW total weight approx. 8,0 t further data see AWF-card with - control SIEMENS SPS-S5-115 U - 2 drilling spindles - chip conveyor - cooling device used, in good condition

more

Listing

Niederstetten

1,334 km

IXION BST-6

€1,300

Fixed price VAT not applicable

Call

Condition: excellent (used), Year of construction: 1971, machine/vehicle number: 19704, TRAINING MACHINE IXION BST-6 -clamping table: 200 x 200 mm -spindle mounting: drill chuck -throat: 180 mm -speeds: 1080 - 10000 rpm -dimensions: 260/615/H800 mm Lo83ahd -Weight: 60 kg With lower table

more

Listing

Wiefelstede

1,085 km

Bench drill

WMW Heckert BT 2

€1,650

Call

Condition: used, Bench drill, bench drill, column drill, pillar drill Bytcid7wwg -Manufacturer: WMW Heckert, bench drill type BT 2 with underframe -Clamping table: 340 x 280 mm -Travel: 250 mm -Spindle holder: MK2 -Projection: 215 mm -Speeds: 355/710/1400/2800 rpm -Column: diameter 92 mm -Spindle stroke: 100 mm -Motor: VEB 0.8 / 1.0 kW with brake -Voltage: 380V -Dimensions: 570/500 / H2020 mm -Weight: 192 kg

more

Listing

Wiesbaden

(dealership location)

1,190 km

HEIDENREICH & HARBECK B 2 P 2

Call

Condition: used, Year of construction: 1973, height from bed to centre of drill: 315 mm M7m3il max. reaming Ø: 178,3 mm bed length: 9400 mm drilling depth approx.: 3150 mm feed range stepless: 70 - 1750 mm/min rapid traverse speed: 4,25 m/min drilling headstock, bore: 62 mm main spindle speed: 180 - 1000 rpm Main spindle drive: 380 V, 15 kW Machine weight: 6,6 t

more

Listing

Metzingen

1,339 km

CNC Deep hole drilling 250 x 4000 mm

TBT M 320-2-1200

Call

Condition: used, Year of construction: 1993, core drilling diameter max. 25 mm bore depth 1200 mm 3pg8230i swing diameter 160 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

more

Listing

Gussago

1,583 km

Deephole boring machines

Mollart Sprint 500

Call

Condition: used, Mollart Sprint 500 deep hole drilling machine Fanuc Power Mate control Max L = 500mm Dia 20 mm Spindles: 2 Spindle rotation: 10000 RPM 100 RPM counter spindle rotation Max pressure 100 BAR The machine can be inspected under power in our warehouse in Gussago BS. machine tools Qhwl7

more

Listing

Babberich

984 km

WOHLENBERG B-1000

Call

Condition: good (used), Year of construction: 2014, Make: WOHLENBERG Type: B-1000 Control: SIEMENS 840D Year: 2014 incl. Boring shaft 75 x 5900 incl. Boring shaft 94 x 5900 incl. Boring shaft 106 x 5900 incl. Boring shaft 130 x 5900 Specifications Metric US Standard Max. drill Ø steel 250 mm Spindle bore 100 mm Drilling depth 4000 mm Power on spindle 63 kW Speeds / ranges 750 Rpm Dimensions (Estimate) Length 18000 mm Width 3800 mm Height 2100 mm Weight Cro0owt3r3 35000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

more

Listing

Denekamp

1,029 km

CNC 800

CNC Impact 800

€84,500

Call

Condition: new, Year of construction: 2023, Technical specs CNC – 800 Control Syntec Drive system YASKAWA servo drive Main motor 7,5 Kw Spindle speed till 7000 Rpm Max drilling dept 800 mm Drilling diameter 2,5 till 30 mm X stroke 800 mm Y stroke 800 mm Z stroke 800 mm cutting feed 300 mm/min spindle speed 7000 Rpm spindle motor Servo 11 Kw X servo motor 3,9 Kw Y servo motor 3,9 Kw Z servo motor 3,1 Kw oil pump motor 5,5 Kw oil pressure 21 bar table loade 6000 kg machine weight 8,3 ton machine power 34 Kw. Machine size 4,2 x 3,5 x 2.6 meter 2wh39q installation on request. price free on truck.

more

Listing

Wiefelstede

1,085 km

Bench drill

Flott TB 13 St

€1,250

Call

Condition: used, Year of construction: 1986, Bench drill, bench drill, column drill, pillar drill Gvbyi9g3 -Manufacturer: Flott, bench drill type TB 13 St -Clamping table: 225 x 295 mm -Spindle mount: with drill chuck -Projection: 185 mm -Speeds: 400-5000 rpm -Column: diameter 60 mm -Spindle stroke: 60 mm, depth stroke with fine adjustment -Motor power: 0.5 kW -Voltage: 220V -Dimensions: 380/225 / H745 mm -Weight: 50 kg

more

Listing

Ennepetal

(dealership location)

1,082 km

LOCH TB 2 15 30001KT

Call

Condition: used, Year of construction: 1993, Control Sinumerik 805 turning speeds 45 - 6000 U/min Solid drill diameter / 0 weight of the machine ca. 20 t Type of machine: deep hole drilling machine Model / Type: TB 2 15 30001KT Year of construction: 1993 Manufacturer: hole Machine number: 221-3000-2093 Machine weight: approx. 20,000 kg Machine footprint: Width = approx. 3800mm Length = approx. 13500mm Height = approx. 3100mm Drilling length: approx. 3500mm Drilling capacity: drill 45mm / drill out 80mm Spindle speed range: 45 - 6000 rpm Control: Siemens Sinumerik 805 Hamül coordinate table Type: KT 8.5 10.10 Clamping surface: approx. 1100 mm x 980 mm Travel: Y - axis: approx. 800mm Traverse path X - axis: approx. 500mm 7 pieces clamping - T - grooves: 18 mm Special equipment: 1 piece Fibroplan NC - rotary indexing table Type: NC 1.05 Permissible transport load in horizontal use 2500 kg With manual chuck Forkardt F 630 The NC rotary indexing table can be adjusted manually in the longitudinal and transverse directions relative to the clamping table and is clamped hydraulically. 1 piece chips - centrifuge Type: VZ5A from CEPA H7f9rkmr Drum capacity: 80 liters Loading weight max. 100 kg Drum - Ø: 600 mm Speed: 1000 rpm 1 additional pump for large drill Ø 1 piece Bosch radial piston pump no.: 0 514 850 005

more

Listing

Metzingen

1,339 km

TBT HS 1-350

Call

Condition: used, Year of construction: 1990, core drilling diameter max. 6 mm bore depth 350 mm swing diameter mm total power requirement 15 kW weight of the machine ca. 3500 kg dimensions of the machine ca. 5000 x 1200 x 2200 mm Cirha2v8lb

more

Listing

Haaksbergen

1,016 km

TIBO E40-1-1000

Call

Condition: as good as new (ex-display), Year of construction: 2018, Number of spindles 1 full drilling 5-40 mm Hardkuj Drilling depth 1.000 mm

more

Listing

1,253 km

Deep hole drilling machine Mollart

TBT TET 30/1050 KT-FS

Call

Condition: good (used), Year of construction: 1986, Deep hole drilling machine TBT Type: TET 30/1050 KT-FS Control: CNC control, Siemens Sinumerik 810D Total power: 48 KW table size: dimension 1000 x 1100 mm Gorhunoysf cross table with rotary table D = 800mm Travel: X-axis horizontal approx. 840 mm Y-axis vertical approx. 300 mm C-axis: 360 degrees drilling depth: max. 1050 mm drilling diameter: from diameter 4 to 30 mm year of construction: 1986 Remark: control and drive motors renewed 06/2016

more

Listing

Tuttlingen

1,342 km

Mollart LD2-500 Sprint

€21,000

Call

Condition: ready for operation (used), Year of construction: 1996, Machine description and equipment* CNC control: GE-Fanuc Power Mate 2 spindles Min-Max drilling diameter: 2-20 mm Max drilling depth: 500 mm Drilling feed range: 0-3000 mm/min Bedgbv3 Motor power: 5,5 kW Extra: counter-rotating workpiece, chip conveyor, high pressure pump, coolant filtration 20 micron, 1200l tub, 100bar feeds: 10 m/min Maximum workpiece length: 500 mm Spindle speed: 10600 rpm Weight: 3500 kg

more

Listing

Wiefelstede

1,085 km

WMW Heckert BT 12/1

€1,650

Call

Condition: used, Bench drill, stand drill, pillar drill, pillar drill -Manufacturer: WMW Heckert, bench drill type BT 12/1 with base -Clamping table: 340 x 280 mm -Travel: 370 mm -Spindle mount: MK2 -Projection: 215 mm -Speeds: 224/450/900/1800 rpm Chffpbo0zl -Column: diameter 92 mm -Spindle stroke: 100 mm -Motor: VEB 0.4/0.7 kW with brake -Voltage: 380V -Dimensions: 620/480/H1710 mm -Total weight: approx. 182 kg

more

Listing

Ennepetal

(dealership location)

1,082 km

Deephole Drilling and Milling Machine

IRLE TLB 1100

Call

Condition: used, Year of construction: 2004, Solid drill diameter 200 mm bore depth / mm number of spindles / Ielaztj Technical specifications Power: 129kW Control: Siemens NC control Speed ??range (stepless): 2 - 300 rpm Feed range (in steps): 3 - 4500 mm / min Oil system capacity: 20,000 liters Maximum flow rate: 1500 l / min Circumferential diameter in bezel: 1100mm Circumferential diameter over bed: 1250mm Distance between centers: 11000mm Clamping diameter faceplate: up to 1100mm Max. Workpiece weight with a stick: 10t Clamping range of the two steady rests: 150 - 1100mm Clamping range BOZA: 1 = 200 - 400mm 2 = 400 - 800mm dimension Min. Outside diameter: 406 mm Max. Outside diameter: 850mm Wall thickness: 10 .... 150mm Max. Workpiece length: 11000mm Max. Workpiece weight: 10 t Max. Strength: 800 N / mm² Specific cutting resistance (Ks): 2000 .... 2100 N / mm² Machine data Machine length: 28,800mm Center height: 560mm Circumferential diameter over bed: 1120mm Full drilling diameter: 200mm Core drill diameter: 350mm Boring diameter without drilling: 350mm Boring diameter with tapping: 350mm Headstock: Main drive motor: Siemens Type: 1 PH 7228 Performance data at 1,000 rpm: 113 kW / 1,079 Nm Performance data at 1,150 rpm: 129 kW / 1,017 Nm Main transmission: Z-F manual transmission Type: 2 K210 Switchable gear ratios: i = 1: 1 i = 1: 4 Fixed gear stage headstock: i = 11.68 Max. Torque: 50,000 Nm Speed ??range I: 2 ... 300 min Speed ??range II: 2 ... 75 min

more

Listing

Remscheid

1,078 km

IXION TLF 1004-2

Call

Condition: good (used), Year of construction: 2000, used 5-axis deep hole drilling machine Manufacturer: Ixion type: TLF 1004 - 2 year: 2000 Control: Mitsubishi type M 530 Ms278w220 Technical data ----- Travels X-axis: 2.000 mm Y-axis: 800 mm Z-axis: 2.000 mm W-axis: 1,000 mm B axis: 360 ° rotary table 1.500 x 1.000 mm, Drill-ø. max. 32 mm, EL carbide drill 40 mm twist drill, withl. support steady rest 24-fold tool changer tool holder SK 40 integr. tool monitoring IKZ 100 bar Chip conveyor Accessories ----- lot deep hole drills Ø 12-26 mm 48 tool holders, drill bushes

more

Listing

Rumänien

2,506 km

Emsil group Narwhal

Call

Condition: used, drilling capacity diameter max.: mm table length: mm table width: mm throat: mm vertical adjustment: mm automatic feeds: revolutions per minute: U/min. longitudinal travel: mm cross travel: mm total power requirement: kW Weight approx.: t space requirements approx. LxWxH: m This is a new machine which is manufactured in Romania by the manufacturer Emsil. Customer wishes can be taken into account depending on technical implementability and are checked in advance by the manufacturer's engineering office. Narwhal features a drilling spindle that is made of hardened, tempered and rectified alloy steel. It is mounted with preloaded oblique precision ball bearings. The machine is also equipped with a milling and boring bar which can handle exceptional power and torque. The bar is made of nitrided alloy steel and is also mounted with oblique preloaded precision ball bearings. It moves on bronze guide bushings. The clamps of both units, used for securing and releasing the tool holder cone with ISO 50 coupling, open and close automatically Biwo72dsb Rotary Turntable: The table is turned by means of a double pinion gearbox, a central rod wth bearings and hydrostatic sliding block of the centre bearing which is of a suitable size to guarantee maximum precision with large loads, even unbalanced ones. There is a recirculating ball screw slide guide system for the x-axes. Both axes are equipped with a direct measuring system. CNC Axes Control: The 9 axes of the machine are monitored at all times. The monitoring system is equipped with a 15'' TFT screen, a control panel, remote diagnostics that alert the user in case of faults, a user memory, network connectivity, remote control of the process, integrated PLC, etc. The machine is compatible with the multiple control systems such as Heidenhain, Fanuc, Siemens etc. You can choose the sizes of machining of X/Y and Z axes: from 1200 - 3500 / 1000 - 3500 / 400 - 1500mm

more

Listing

Staufenberg

1,232 km

Bench drilling machine with pneumatic before the

TBT T10-500 (Bohrtiefe 500 mm)

Call

Condition: good (used), Year of construction: 1980, Deep hole drilling machine make TBT type T10-500 Machine # 410 311 053 Year of manufacture 1980 Technical data: Drilling depth max. 500 mm drilling range in steel 3 -12 mm B7qvfapn reaming max. 15 mm Speed of the working spindle min. 2520 1/min Speed of the working spindle max. 8000 1/min feed stepless 8 - 160 / 35 - 320 mm/min Nominal speed stepless 5,9 - 53 / 11,8 - 106 1/min control range 1 : 9 rapid traverse speed 3 m/min Center height above floor 1150 mm Center height over bed 230 mm Center height over table/slide 180 mm Table dimensions 420 x 1030 mm Table slots design and size DIN 650/4 Coolant tank min/max 590/670 ltr total connected load 9,0 kW outer dimensions 3400 x 1700 x 1800 mm weight approx. 2500 kg used, in good condition

more

Listing

Sundern (Sauerland)

1,125 km

Ixion

Call

Condition: excellent (used), Year of construction: 1975, Bench drill IXION BST 13Welded steel table with pneumatic feed Nvcbz

more

Listing

Wiefelstede

1,085 km

Tischbohrmaschine

AEG DTB-4/6

€220

Call

Condition: used, Bench drill, stand drill, pillar drill, column drill -Spindle holder drill chuck: 4 mm -Clamping table: O 125 mm - Projection: 105 mm K8wpooay -Speeds: 1400 rpm -Pillars diameter: 41 mm -Spindle stroke: 55 mm -Motor power: 75W -Dimensions: 290/150/H530 mm -Weight: 13.4kg

more

Listing

Metzingen

1,339 km

CNC Deep Hole Drilling Machine

TBT BWP 250

Call

Condition: used, Year of construction: 1996, core drilling diameter max. 25 mm bore depth 1000 mm swing diameter mm total power requirement 25 kW weight of the machine ca. 12,5 t dimensions of the machine ca. m T B T (Germany) CNC-Controlled Horizontal Deep Hole Drilling " Centre " Model BWP 250 Year 1996, but reconditioned mechanically and electrically in 2006 _____ Working range: X Axis, machine column cross 2,000 mm Z Axis, drilling slide horizontal 1,200 mm Drilling depth 1.000 mm Y Axis, drilling slide vertical 1,100 mm Table clamping area 1,200 x 2,000 mm Drilling capacity in solid material, approx. 4 - 25 mm Tool holder taper HSK 50 Spindle speeds 1.260 - 15,000 rpm Feed rates / quickfeed, XYZ, infinitely variable 100 - 10,000/15.000 mm/min. Force rate of feed motors 27 Nm / 1.000 daN Spindle drive steplessly adjustable 7 kW Total electrical load, approx. 30 kW - 400 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features: " Ideal machine for the complete processing of large workpieces like tool a. dies (cooling holes) mould- and dieplates, hydraulicparts etc. by means of deep hole drilling up to 25 x 1.000 mm, face milling up to Ø 60 mm, spiral twist drilling, counterboring and threading up to M 24 x 3 mm. " SIEMENS Continuous Path Control in 4 axes Model 840 D, with process monitoring for coolant pressure, operation data control function, toollife, feed force,Error diagnostics and easy dialogueprogramming directly on the panel, etc. " High Frequency Spindle Make GAMFIOR with stepless speeds " Hydraulically movable drill bush carrier, swivels 90° for holding gun drills (ELB) or picking up regular tools from the tool changer like twist drills, milling tools, taps, etc. " With automatic tool changer made by MIKSCH, Model CTM 40, using a 12-position tool changer, which is mounted on the r.h.side of machine housing, in fixed position, only moving forward and backward for tool changing operation. " Built-on indexing table as B-Axis made by FIBRO Model RTN 400 = 420 x 420 mm, " Extra Rotary Table made by FIBRO with Ø 1.000mm, for indexing 3-144 positions " Built-in coolant device with chip conveyor and various filters. " 2 steady rests. " Completely covered working area with access at the front and at the side. Condition : Very good condition. This is a rare and valuable machine. Under Power Resjr Delivery : immediately ex our Stock Payment : Net, after conclusion of contract.

more

Listing

Heilbronn

1,298 km

Froriep/Hellwig 961

Call

Condition: good (used), Year of construction: 2006, CNC control Sinumerik 840D diameter of the face plate 1200mm steady rest chip conveyor Technische Daten / technical details: Umlaufdurchmesser über Bett / rotary diameter over bed 1000 mm Umlaufdurchmesser in Rollenbock / rotary diameter at steady rest 900 mm Max. Bohrtiefe / max. drilling depth 8850 mm max. Bohdurchmesser / max. drilling diameter 326mm Spanndurchmesser Planscheibe / clamping diameter at face plate 900 mm Drehzahlbereich / spindle speed 1-300 U/min Vorschubbereich / infeed 0,5-4500 mm/min Antriebsleistung / drive capacity 129 kW Werkstückabmessungen: / workpiece measures Min. Aussendurchmesser / min. outer diameter 150 mm Max. Aussendurchmesser / max. outer diameter 900 mm Brf8izbrnf Max. Werkstücklänge / max. workpiece lenght 8000 mm Maschinengewicht / weight of machine 47000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

more

Listing

Haguenau

1,230 km

DEEPHOLE BORING MACHINE

IXION TL 5 SV

Call

Condition: excellent (used), Year of construction: 1985, Maschinen-Details Lagernummer 1105-03722 Maschinenart Tieflochbohrmaschine Fabrikat IXION Typ TL 500 SVA Baujahr 1985 Enpuvb0 Steuerungsart CNC Steuerung CNC Bosch Alpha Lagerort HAGUENAU Ursprungsland DEUTSCHLAND Lieferzeit sofort Frachtbasis ab Lager Technische Details Kernbohrdurchmesser - max. 1,5 - 18 mm Bohrtiefe 600 mm Aufspanntisch, starr 700 x 1.350 mm Aufspannfläche des Rundtisches 1.000 x 500 mm Längsbewegung des Tisches 600 mm Tischverschiebung in Bohrrichtung 400 mm Tisch drehbar 180 ° Vertikalverstellung des Bohrschlittens 250 mm Bohreinheit schwenkbar +/- 15 ° Spindelkonus MK 3 Anzahl der Drehzahlen 8 Drehzahlbereich 240 - 2.400 U/min Steuerung CNC Bosch Alpha Motorleistung 1,0 / 1,6 kW Gesamtleistungsbedarf 10 kVA Maschinengewicht ca. 1,35 t Raumbedarf ca. 2,0 x 1,5 x 1,8 m Zusatzinformationen IXION Tieflochbohrmaschine mit heidenhain 3 axis digitalanzeige Maschinen-Nr. 113178, Kühleinrichtung

more

Listing

Wiefelstede

1,085 km

Flott M2 ST

€2,450

Call

Condition: used, Bench drill, stand drill, pillar drill, pillar drill -Manufacturer: Flott, bench drill type M2 ST 9zav27xxf3 -Clamping table: 260 x 200 mm -Travel: 310 mm -Spindle holder: MK2 with drill chuck 3-16 mm -Projection: 240 mm -Speeds: 80-4000 rpm -Pillar: diameter 82 mm -Spindle stroke: 100 mm, depth stroke with fine adjustment -Motor power: 0.75 kW -Voltage: 400V -Dimensions: 750/340/H1100 mm -Weight: 135 kg

more

Listing

Metzingen

1,339 km

SIG B 30 /16

Call

Condition: used, Year of construction: 1965, core drilling diameter max. 50 mm bore depth 2000 mm swing diameter mm drilling capacity diameter max. 110 mm total power requirement 30 kW weight of the machine ca. 10 t Drilling Ø, approx.2 - 50mm Boring Ø, approx.100mm Drilling depth, max. (see stroke / mounting length)1,600 - 2,000mm Stroke of drilling slide, approx.4,000mm Distance between the two spindle heads5,000mm Height of centres above guideways350 / 450mm Drilling feed of drilling slide, infinitely variable20 - 200mm/min Quick feed of drilling slide2,500mm/min Spindle speeds via belt disks260 - 650 / 650 - 1,625rpm Workspindle drive24kW Drive of coolant pumps1 x 7.5/15 kW and 1 x 15/28kW Total electrical load, approx.60 kW - 380 V - 50Hz Total length of machine / guideways7,500 / 5,000mm Weight, approx.10,000kg Accessories / Special Features *Machine consists of the following elements: Resit Main spindle on the left-hand side, followed by the coolant oil supply device. Table group, driven by ball screw spindle. Coolant oil supply device with elevated height of centres. At the end is a headstock, Type B 16, with drive motor approx. 7.5 kW, n = 900/2400 and 2400/6000. Large coolant device with filter unit. Large selection of accessories and drilling tools with Ø up to 100 mm. *Machine is suitable for working with a rotating workpiece together with a fixed drilling tool (ELB and BTA Process), as well as for a fixed workpiece and a rotating drilling tool. It can work with internal oil feed (Elb) or with external oil feed (BTA). *Complete oil coolant unit with tank and filter and two SIG high pressure pumps. Number of litres can be set: 17 / 40 / 120 or 220 / 500 litres per minute. Capacity approx. 2,500 l. *Feed of main slide is via ball screw spindle and infinitely variable DC motor. Mounted on the main slide is at present a table, approx. 800 x 800 mm, cross-adjustable approx. 500 mm, and suitable for holding cubic and cylindrical workpieces. Electric control via cam rail, approx. 2,500 mm long. End switch for quick feed, feed and return. *2 closed 3-point steady rests. *FORKHARDT 3-Jaw Chuck, manually operated, Ø approx. 315 mm. *Modernized control panel with speed display, feed setting and display, display for kW, switch for feed, quick feed, right/left, etc. *2 separate switch cabinets, separate coolant oil display device, bushes, reducers, clamping helps and lots of other accessories. This is a very valuable machine because of all the accessories!

more

Listing

Wiefelstede

1,085 km

Tischbohrmaschine MK2

Hegner* Drehzahlen 6

€450

Call

Condition: used, Year of construction: 1956, Bench drill, bench drill, column drill, pillar drill - Recording: MK2 -Projection: 260 mm -Travel: 190 mm -Speeds: 435 - 4350 rpm - Column diameter: 80 mm -Spindle stroke: 70 mm Bi7e7sbvbk -Motor power: 450 W -Base plate: sheet metal plate -Dimensions: 645/635 / H780 mm -Weight: 130 kg

more

Listing

Metzingen

1,339 km

GILDEMEISTER & KNOLL 2 M 01-2-320

Call

Condition: used, Year of construction: 1985, core drilling diameter max. 18 mm bore depth 320 mm swing diameter mm total power requirement 33 kW weight of the machine ca. 6 t 2u9sfi dimensions of the machine ca. m

more

Listing

Wiefelstede

1,085 km

IXION MAXION Ixion BT13 ST

€2,450

Call

Condition: used, Year of construction: 2003, Bench drill, stand drill, pillar drill, pillar drill Zzms0egr -Manufacturer: Ixion, bench drill type BT13ST -Clamping table: 170 x 170 mm -Travel: 210 mm -Spindle holder: drill chuck B16 -Projection: 180 mm -Speeds: 420 - 2100 rpm stepless -Pillar: diameter 65 mm -Spindle stroke: 70 mm, with fine stop -Motor: AEG 0.7/1.0 kW -Voltage: 380V -Dimensions: 620/235/H800 mm -Weight: 70kg

more

Listing

Wiefelstede

1,085 km

Bench drill

Ixion Ixion BT 6

€1,850

Call

Condition: used, Year of construction: 2000, Bench drill, bench drill, column drill, pillar drill -Manufacturer: Ixion, bench drill type BT 6 -Clamping table: 290 x 225 mm -Travel: 150 mm -Spindle mount: drill chuck -Projection: 180 mm -Speeds: 1080 - 12000 rpm 8 levels -Column: diameter 75 mm -Spindle stroke: 60 mm, with fine stop Byesk9ufrs -Motor: AEG 0.37 / 0.6 kW -Voltage: 380V -Dimensions: 640/330 / H740 mm -Weight: 92 kg

more

Listing

Wiefelstede

1,085 km

Tischbohrmaschine

AEG DTBK-10

€490

Call

Condition: used, Bench drill, bench drill, column drill, pillar drill - Manufacturer: AEG, bench drill type DTBK-10 - Clamping table: 175 x 175 mm -Spindle holder: drill chuck B16 -Projection: 200 mm - Column: diameter 60 mm -Spindle stroke: 70 mm -Motor: 0.25 kW / 2800 rpm -Voltage: 380V -Dimensions: 580/590 / H730 mm Gxab07vn -Weight: 60 kg

more

Listing

Wiefelstede

1,085 km