Used Drilling Machine Drill Press for sale (67,712)

Condition: reconditioned (used), functionality: fully functional, Drilling and pressing machine for all types of furniture fittings, rows of holes and hole group drilling machine in system 32 Power connection 400V 0.75kW Bodoumw Sbjpfx Agzeld Spindle speed 2800 rpm Stop ruler 960 mm 2x swivel stop for drills with shaft diameter 10 mm Workpiece thickness max. 40 mm 1x 7-spindle drilling head for row of holes, pitch 32 mm with integrated pins Manual feed Base at an additional cost Olive drilling head €450.00 Mepla drilling head with pressing die €550.00 Hettich drilling head with pressing die €550.00

Condition: good (used), Year of construction: 1995, Pot hole boring machine Grass ECO Press Year of manufacture 1995 S/N 9502665 in good condition right and left linear guide (work table can be supplied ) weight approx. 45 kg 380 V - 50 Hz - 2,5 A pneumatic connection - max 6 bar Blodpfxsk D T Ncj Agzed CE marked

Condition: ready for operation (used), Year of construction: 1977, Asquith ODI Mk2 14/54 5MT Radial Arm Drilling Machine Spindle centre to column centre max. 54" Spindle travel 14″ Spindle taper 5 MT Spindle speeds (16) 40-2040rpm, Spindle motor 5.5 HP Spindle emergency brake Power elevation of arm Power locking to arm and head Box Table Coolant 415V Electrics 1977 For sale with Jet Machinery Ltd Bodpfx Agjyg Skajzold Jet Machinery Stock No: #79026 Machine Serial Number: P.33677 Cost: £6,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2007, BEMA MG1050 Radial Arm Drilling Machine Year of Manufacture 2007 1000mm Radial Arm Spindle Centre to column min/max 300 - 1000mm Bodpfx Agsxawcmjzold Spindle Taper 4MT Spindle Motor 2.2kW Speeds 32 - 2500rpm Spindle Stroke 280mm Box Table 600 x 450 x 450mm Base Plate 1700 x 800mm LWH - 1760 x 800 x 2050 Weight 1600Kgs *For Sale with Jet Machinery Ltd* Jet Machinery Stock No: #78995 Machine Serial Number: 710080 Cost: £5,950.00 + VAT (£7,140). Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, Miyanach WS-6000M Magnetic Drilling Machine – Professional Mag Drill Miyanach WS-6000M Professional Magnetic Drilling Machine, heavy-duty portable industrial drilling unit designed for precise drilling operations on steel structures and metal fabrication applications. The machine is in very good working condition, complete with transport case and ready for immediate use. ✅ Technical Specifications Manufacturer: Miyanach Professional Model: WS-6000M Machine type: Magnetic drilling machine (Mag Drill) Magnetic base: Electromagnetic Dimensions 340 x 280 x 680 mm (Highest), 340 x 280 x 530 mm (Lowest) Weight 23kg ⚙️ Performance Maximum drilling capacity: Ø 60 mm Speed settings: 2-speed gearbox Low speed: 450 rpm High speed: 750 rpm Suitable for: Core drilling (annular cutters) Twist drilling Steel fabrication work ⚡ Electrical Data Input voltage: 220–240 V AC Frequency: 50/60 Hz Power consumption: 1850 W Rated current: 7 A 🧰 Features Powerful electromagnetic base for secure positioning Industrial heavy-duty motor Two-speed mechanical gearbox Integrated control panel: Magnet ON/OFF Motor ON/OFF Overload protection with reset Portable design with ergonomic handle Blsdoyn N E Repfx Agzod Precision drilling on vertical, horizontal or overhead surfaces Supplied with carrying case ✅ Condition Like NEW Fully functional Clean mechanical condition Normal cosmetic wear from workshop use Tested and ready for operation ✅ Applications Ideal for: Steel construction Metal fabrication workshops Structural assembly Maintenance & installation works On-site drilling operations

Condition: used, Year of construction: 1992, Elcos 2 head drilling machine is a machine manufactured by Elcos in 1992, with a format of 45 x 150 mm. Currently stored in Germany, it features a drill distance of 45 - 150 mm, space behind the drill heads of 100 mm, and is a double head paper driller. It operates with a lever and is single phase 240 volts. The delivery terms are FCA. Format: 45 x 150 mm Blsdpjwvuubjfx Agzsd Equipment: Double head paper driller Drill distance 45 - 150 mm Space behind drill heads 100 mm Operation Lever operated, single phase 240 Volts

Condition: used, Year of construction: 1976, functionality: fully functional, machine/vehicle number: 4218/ 12035, Axis height over bed: 1500 mm Blodpewqk Umjfx Agzed Speed: 0 - 315 rpm Range of diameters and length of drilling on one side:. D 35 – 45 mm L = 4000 mm D 46 – 65 mm L = 6000 mm D 66 – 85 mm L = 8000 mm D 86 – 105 mm L = 12,000 mm D 106 – 125 mm L = 16,000 mm D 126 – 200 mm L = 24,500 mm D 201 – 250 mm L = 24,500 mm D 251 – 555 mm L = 18,000 mm

Condition: new, functionality: fully functional, Year of construction: 2025, bending force (max.): 1,000 t, stroke length: 200 mm, operating speed: 50 mm/s, reverse speed: 180 mm/s, overall weight: 8,000 kg, total length: 3,915 mm, total width: 1,605 mm, total height: 2,655 mm, input voltage: 380 V, input frequency: 50 Hz, warranty duration: 24 months, bending angle (max.): 90 °, table length: 3,200 mm, working height: 450 mm, All-Electric Servo Bending Machine Nominal force(KN): 1000 Slider stroke(mm): 200 Throat depth (mm): 360 X-axistravel(mm): 600 R-axistravel(mm): 200 Z-axistravel(mm): 2500 🔹 Smart CNC System – SL100-P with high-end algorithms and 12-inch touchscreen for intuitive operation. 🔹 High-Precision Structure – Finite element analysis (FEA), annealed, and one-time machining for long-term stability and accuracy. 🔹 4-Axis Intelligent Backgauge – AC servo-driven, high-speed positioning with automatic collision avoidance. 🔹 Precision Compensation System – Adjustable convex strips & fine-tuning mechanism for optimal bending accuracy. Bljdev Hchljpfx Agzed 🔹 Powerful & Durable Drive – High-torque servo motor, heavy-duty ball screws & sealed protection for longevity. 🔹 Fully Closed-Loop Control – Y1/Y2 magnetic scale feedback, positioning accuracy ±5μm. 🔹 Optimized Electrical System – Closed electrical box, heat dissipation, & neat wiring for reliability and easy maintenance. 🔹 Imported Precision Components – Ball screws & linear guides ensure accuracy without stroke compensation. 🔹 High precision, stability, and smart automation – designed for professional sheet metal bending!

Condition: used, total width: 1,000 mm, total length: 2,400 mm, total height: 2,700 mm, Empty weight: 2.500 kg - Documentation available: No - CE certificate present: No - Control: Conventional - Motor power: 7.0kW - Drilling depth: 130mm - Spindle speed max.: 2500rpm - Model: iaalboormachine - Tool holder: MK4 - Table width: 750mm - Table length: 1400mm Bedewnnblopfx Agzeld - Drilling capacity: 50mm - Travel X: 950mm - Travel Y: 900mm - Spindle diameter: 70mm - Max. reach: 950mm - Spindle speed min.: 28rpm - Transport dimensions: 2400mm x 1000mm x 2700mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1976, arm length 1450 mm Bsdpjyn R N Dofx Agzjld taper MK 4 Cube ja weight of the machine ca. 3 t

Condition: ready for operation (used), Year of construction: 2003, bore capacity in steel (diameter) 40.0 mm threading M 24 in St 60 throat 293 mm bore stroke 140 mm morse taper 3 Kurzspindel MK table: 514 x 360 mm turning speeds 160 - 2250 U/min column diameter 115 mm throat 293 mm Bjdoynbfpspfx Agzsld distance spindle /table min 117 / max 701 mm T-slots 2 x 14 x 224 feed 0.1 + 0.2 mm/U total power requirement 1.45 / 1.90 kW weight 370 kg dimensions of the machine ca. 1200 x 800 x 1840 mm current new price ~ 12.500 euros special price on request Equipment: - robust column drill - V-belt - - infinitely variable speed adjustment - analog speed system - automatic spindle feed - thread cutting device - pole-changing drive motor - height-adjustable work table - machined base plate - feed overload protection - Main switch with motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP - Spindle protection - Operating instructions in German * Special equipment included : - Thread cutting device * with foot switch, for thread cutting with stop - Machine light - Coolant device in the machine base

Condition: new, Year of construction: 2026, - Infinitely variable speed control - Quick-adjustable drilling depth stop - Thread cutting device - Undervoltage release - Table height adjustment via rack and pinion - LED head lighting - Continuous/standard drilling capacity 20/23 mm - Thread cutting capacity max. M 12x1 - Spindle MK II - Drilling depth 100 mm - Throat depth 260 mm Blsdpjd Nk S Iefx Agzjd - Column diameter 110 mm - Usable table surface (W x L) 420 x 340 mm - T-slot size (arm): 2 slots, spacing 125 mm - Digital speed display - Digital drilling depth display - Quick-adjustable drilling depth stop - Manual feed - Motor: 3-phase 400 V - Spindle speeds stepless 30 - 3,000 rpm Option Drill Package 3 consisting of: - Machine vice [felix] 2.0 100 mm - Quick-release drill chuck 3-16 mm (accuracy 0.17 mm) - Morse taper arbor MK 2 B18 and reduction sleeve MK 2 to MK 1 €485.00 Option: Coolant system: €605.00 FACTORY WARRANTY: 3 years DELIVERY: Free to your door, including packaging NOT THE RIGHT MACHINE? WE ARE AN OFFICIAL FLOTT PARTNER AND CAN OFFER YOU THE ENTIRE FLOTT PRODUCT RANGE! PLEASE ASK US FOR AN OFFER!

Condition: used, Year of construction: 1975, drilling capacity steel/cast iron 23,30 mm throat 300 mm bore stroke 140 mm spindle taper MT MK 3 spindle turning speed range 208- 2000 U/min table travel 400 mm weight of the machine ca. 275 kg table-size 415 x 300 mm distance work spindle /surface of the table 450 mm Bljdpeymp Snefx Agzod voltage 400 V connected load 0,9/1,4 kW

Condition: like new (used), Year of construction: 2012, Machine is completly refurbished by our technical staff Bledpfx Aoxn T Smsgzed

Condition: new, Year of construction: 2026, functionality: fully functional, New KAO MING hydraulic radial drilling machine, year of construction 2026. Specifications: Maximum distance between spindle center and column face: 1250mm Minimum distance between spindle center and column center: 360mm Column diameter: 350mm Column height: 2685mm Base floor space: 2035x840mm Total floor space: 2335x1140mm Base height: 188mm Spindle head longitudinal travel: 890mm Vertical arm travel: 700mm Spindle travel: 300mm Spindle taper: MK5 Table work area: 1393x820mm Main spindle motor: 3.7kW (5hp) Spindle speeds: 25–1310rpm (12 steps) Feed range: 0.06mm/rev to 1.12mm/rev (12 steps) Drilling capacity in cast iron: 60mm Drilling capacity in steel FC20/S45C: 50mm Blsdpfoykkhxsx Agzsd Weight: 3460kg

Condition: used, Year of construction: 2020, total height: 2,100 mm, total length: 2,000 mm, total width: 2,500 mm, Price: On request - Machine available from: 2025-12-15 - Year: 2020 - Documentation available: Yes - └ Type Documentation: Operating system, Technical data, User manual, Electrical diagrams - CE marking present: Yes - CE certificate present: No - Serial number: 1000040377 - Main motor power [kW]: 10 - Number of controlled axes [pcs]: 3 - Working range X [mm]: 975 - Working range Y [mm]: 1321 - Working range Z [mm]: 243 - Number of milling spindles [pcs]: 1 - Tool holder interface: ISO30 - Spindle diameter [mm]: 16 - Min. spindle speed [rpm]: 1000 - Max. spindle speed [rpm]: 18000 - Horizontal drilling unit: Yes - Horizontal drilling spindles [pcs]: 10 - Vertical drilling unit: Yes - Software: Biesse works - Saw unit present: Yes - Safety feature: - Spindle speed control: Variable - Voltage [V]: 400 - Current consumption [A]: 18 - Fuse [A]: 32 - Power [kW]: 10.0 - Transport dimensions: 2000mm x 2500mm x 2100mm (l x w x h) - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT Bsdpfsx Ad R Nex Agzsld VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 1994, functionality: fully functional, throat depth: 1,250 mm, Radial drilling machine Fab. Breda type. R 55-1250 Year of manufacture 1994 Technical details Make: BREDA Type: R 55-1250 Throat: 1250 mm Drilling capacity in steel: 55 mm Drilling capacity in cast iron: 70 mm Tapping capacity in steel: M 50 Tapping capacity in cast iron: M 65 Drill spindle mount: MT 5 Throat: 1250 mm Cross travel of headstock: 930 mm Minimum/largest distance from base plate: 5360 – 1375 mm Vertical travel of the boom: 705 mm Spindle stroke: 310 mm Bsdpfx Agjv Rpf Sszjld Number of spindle speeds: 12 Spindle speeds: 30 – 1200 rpm Number of feeds: 8 Feeds: 0.06 – 1.0 mm/rev Base plate 2070 x 910 mm Clamping area base plate 1325 x 910 mm Motor power 4.4 kW - 380 volts Dimensions (L x W x H) 2.1 x 1.0 x 2.5 m Weight 3 t Accessories Drilling table 750 x 600 x 550 mm Cooling Hydraulic clamping All information is subject to change. A demonstration is available at any time in our showroom.

Condition: new, Year of construction: 2026, Thread cutting device Undercutting device Programmable drilling depth stop Drilling depth and speed display - digital Thread cutting device M30 (pitch-dependent) Option R1: Infinitely variable spindle speeds with intermediate gearing, speed range 100-2000 rpm Option R2: Infinitely variable spindle speeds with intermediate gearing, speed range 70-1400 rpm Drilling capacity 35/40 mm Spindle taper MK 4 Drilling depth 160 mm Throat 300 mm Usable table area (swiveling) 590 x 450 mm Feed rate 0-300 mm/min, stepless Table height adjustment with rack and pinion Machine dimensions (W x D x H) 610 x 850 x 1920 mm Bleded H Rh Rjpfx Agzjd Motor - three-phase 400 V, pole-reversible, 1.5/3.0 kW Weight 420 kg Option Drill Set No.6: Taper arbor B18/ MK 4, Keyless drill chuck B18/ 3-16 mm, Machine vice No. 2-140 and T-slot bolts, EUR 910.00 Option: Automatic spindle stop at upper drill spindle position, EUR 432.00 Option: Chip break module EUR 432.00 Delivery: free to site including packaging (Germany only) Warranty: 3 years NOT THE RIGHT MACHINE? WE ALSO OFFER OTHER FLOTT PRODUCTS – REQUEST AN OFFER! FLOTT AUTHORIZED DEALER

Condition: new, Year of construction: 2026, Continuous/Standard Drilling Capacity: 18/20 mm Thread Cutting Capacity: M12 (depending on pitch) Spindle Taper: MK II Drilling Depth: 100 mm Throat Depth: 240 mm Column Diameter: 82 mm Usable Work Surface (W x L): 340 x 280 mm T-slot Size (Arm), Spacing (mm), Slot Width (mm): Number: 2, 125, 13/26 Speed Display: Digital Drill Depth Display: Digital Drill Depth Stop: Quick-adjust stop ring Manual Drill Feed Table Height Adjustment with Rack-and-Pinion Motor: Three-phase AC – frequency-controlled, 230 V, 0.75 kW Spindle Speeds: Infinitely variable 30 – 3000 rpm Table Work Surface: 155 - 415 mm Base Work Surface: 155 – 550 mm Machine Dimensions: 355 x 705 x 1,825 mm Weight: 195 kg Bledpfxjvu Tmns Agzod Optional Accessories Drilling Bundle 3 consisting of: - Machine vice [felix] 2.0, 100 mm - Quick-action drill chuck 3-16 mm (accuracy 0.17 mm) - Taper shank MK 2 B18 and reduction sleeve MK 2 to MK 1 €485.00 D0Ezfi Factory warranty: 3 years Free delivery including packaging (Germany only) Delivery time: available immediately from stock NOT THE RIGHT MACHINE? WE ARE AN OFFICIAL FLOTT PARTNER AND CAN OFFER YOU THE FULL RANGE OF FLOTT PRODUCTS! ASK US FOR AN OFFER!

Condition: new, Year of construction: 2026, Spindle speed electronically variable, 40-4000 rpm Spindle: MT2 Table height adjustment via rack and pinion Maximum tapping capacity: M12 Setting of tapping depth via digital depth indicator digital speed display Bedsig H Rdopfx Agzsld digital drilling depth display Drilling depth stop via stop ring Feed: manual Table height adjustment via rack and pinion Continuous/standard drilling capacity in steel: Ø 15 mm / 18 mm Drilling depth: 70 mm Throat (distance from spindle to column): 220 mm Column diameter: 70 mm Usable table area (W x L): 300 x 250 mm Machine dimensions (W x D x H): 420 x 520 x 850 mm Weight: 65 kg Max. distance spindle/table/base: 300 / 370 / 420 mm Motor: single-phase AC, controlled by frequency inverter, 230 V, 0.54 kW OPTIONAL Drill Package 2 (No. 296591) - Felix 80 vice - Quick-action drill chuck B16 1-13 mm - Morse taper arbor B16 / MT2 - Reducing sleeve MT2 / MT1 Price: €315 Factory warranty: 3 years Delivery free of charge including packaging (within Germany only) NOT THE RIGHT MACHINE? WE ARE AN AUTHORIZED FLOTT SERVICE PARTNER AND CAN OFFER YOU ANY PRODUCT FROM THE FLOTT RANGE! ASK US FOR AN OFFER!

Condition: like new (used), functionality: fully functional, throat depth: 1,200 mm, We offer this Bergonzi TR 40 radial drilling machine, year of manufacture unknown. MC4 Reach 1200 In truly like-new condition. Runs smoothly, a very tidy machine. Blodpsynw Adefx Agzsd If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2015, total height: 1,850 mm, total length: 2,300 mm, total width: 1,950 mm, Empty weight: 1.240 kg - Year: 2015 - Documentation available: No Bodpfoxhchdsx Agzjld - CE marking present: Yes - CE certificate present: No - Serial number: AB/222595 - Voltage [V]: 400 - Current consumption [A]: 10 - Transport dimensions: 2300mm x 1950mm x 1850mm (l x w x h) - Transport weight [kg]: 1240kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2016, total height: 2,350 mm, total length: 4,300 mm, total width: 1,880 mm, Empty weight: 1.310 kg - Year: 2016 - Documentation available: No - CE marking present: Yes - CE certificate present: No Bsdpfxoxy Rk Re Agzjld - Serial number: AB/226310 - Transport dimensions: 4300mm x 1880mm x 2350mm (l x w x h) - Transport weight [kg]: 1310kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: good (used), drilling depth: 1,500 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 1,500 mm, Manufacturer: TBT deep drilling technology Type: BW 250-S Control: SIEMENS 840D Year of manufacture: 2007 Drilling, Milling, Tapping for heat exchanger bases and plates Swivable A Axis + 25 to - 15 Degrees Filtration and Coolant system 1000 L Cip conveyor 2000 x 1200 height out put Milling tool changer Tower Station 20 positions Capacity ELB Drilling 3 - 35 mm Capacity Milling 250 ccm/Min Feed rates all axis 15,000 mm/Min X-Y-W-Z Cutting hours approx. 15,000 Bodpov A Uw Dsfx Agzeld Large tooling package Specifications Metric US Standard Max. Drill Ø steel 40 mm Drilling depth 1500 mm X - axis 2000 mm Y - Axis 1300 mm Z-axis 1500 mm W-axis 750 mm Table load 15000 Table dimensions / L x W or ø 1600 x 1200 mm Spindle mount HSK 63 Mk Spindle power 11 kW Speed 8000 Rpm Dimensions (estimate) Length 7200 mm Width 7800 mm Height 4250 mm Weight 23000 kg Please note: The information on this page is believed to be accurate and is provided by us and, where possible, from the manufacturer. The information is provided in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation or contractual terms. We recommend that you check all important details.

Condition: used, Technical details: bore capacity in steel (diameter): 23 mm throat: 250 mm bore stroke: 150 mm speeds:: 180-2000 U/min Bedpfx Aeynhmmsgzeld spindle taper: MK2 total power requirement: 1,5-2,2 kW weight of the machine ca.: 500 kg