Used Box Column Drilling Machine for sale (74,990)

Condition: used, Bench drill, gear drill ALZMETALL Type AB 40 ST Production drill Manufacturer No. 750 Year of manufacture 1994 Drilling capacity 40 mm Spindle mount MK 4 - short quill Overhang 325 mm Quill stroke 200 mm Bedoza Hzgepfx Afmelk Table size 740 x 460 mm Height adjustment of drill head 700 mm Distance spindle-table max. 1015 mm Spindle speed 56 - 2500 rpm 12 gear stages Automatic feed 0.15 - 0.2 - 0.3 - 0.36 mm/rev Motor power 4 kW Mains connection 380 Volt, 50 Hz - Spindle speed via 12 gear stages - Drilling and threading device with right and left rotation - Electric foot switch for switching the direction of rotation to left for thread cutting interruption - Rapid traverse via hydraulic quill movement - Semi-automatic operating sequence: rapid traverse - working feed - rapid return - Drill head height adjustment via hand crank - Table height adjustment via hand crank (table height from 740 to 1170 mm) - Coolant system - Control cabinet on the back of the machine - Mounted on a steel plate (1300 x 750 x 15 mm) with machine feet - Quick-change drill chuck METABO 3 to 16 mm - Operating manual and electrical diagram Overall height with drill head at the top 2750 mm Space requirement L x W x H 1400 x 850 x 2300 mm Weight 1250 kg Good condition

Condition: used, Box column drilling machine WEBO Series- No 132 Machine No: 9 Drilling capacity 50 mm Spindle cone MK 5 - long quill throat 430 mm spindle stroke 280 mm Height adjustment of drill head 500 mm Table size Ø 725 mm Distance between drill spindle and table max. 740 mm Distance between drill spindle and clamping surface on machine base max. 1240 mm Spindle speed 55-820 rpm Feed rate level 1 0.13 - 0.2 - 0.27 - 0.4 mm/rev. Bledpfxoqa Txqj Afmek Feed rate stage 2 0.6 - 0.83 - 1.17 - 1.8 mm/rev. Column diameter 300 mm Motor power 2.8 / 3.6 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator - Manual drill head height adjustment via hand crank, clamping with clamping screws - Rotatable drill table with mechanical clamping - Table height adjustment via hand crank - Clamping surface on machine base 600 x 550 mm Top height of drill head 3020 mm Overall height drill head bottom 2520 mm Space requirement L x W x H 1400 x 780 x 2520 mm Weight 1600 kg good condition

Year of construction: 1970, condition: ready for operation (used), Box column drilling machine Make ALZMETALL Type:AB4 HST Year 1970 with coolant device . drilling capacity in steel max : 40 mm spindle mounting : MK4 spindle speed : 80-710 rpm feeds : 0.09 - 0.16 -0.28 mm/rev Blodpfsmp Tp Hex Afmok table size : 600X460 mm Machine is ready for use .

Condition: good (used), Year of construction: 1982, machine/vehicle number: 340, Offer 25032 Technical data: - Drilling capacity in steel ST 60: 50 mm - Maximum drilling capacity in steel ST 60: 65 mm - Thread cutting device up to: M 60 - Drill spindle taper: MK 5 - Drill spindle stroke: 240 mm - Throat depth: 400 mm Bodpfxeyk Dp No Afmolk - Table with 2 T-slots: 720 x 560 mm - Max. distance table – drill spindle approx.: 850 mm - 4 feeds: 0.1 - 0.2 - 0.3 – 0.4 mm/rev - Feed gearbox infinitely variable with change gearbox - Spindle speeds infinitely variable: 40 - 1,600 rpm - Drive: 400 V / 5.5 kW - Space requirement approx.: W 850 x H 2,480 x D 1,350 mm - Weight approx.: 1,450 kg

Condition: used, functionality: fully functional, Column drilling machine Tool holder MK 4 With gear transmission, quill feed. Bodpfjy A Sz Sex Afmelk

Condition: new, Year of construction: 2026, Heavy-duty design for the entire machine High running smoothness thanks to a new spindle design Industrial motor Separate emergency stop switch Drill depth stop LED machine light integrated into the drill head Precisely machined, stable drill table with diagonally arranged T-slots and an all-around coolant channel Drill table can be tilted ± 45° and rotated 360° V-belt cover with safety switch Precision spindle bore Machine control and safety electronics in 24 V DC Guaranteed concentricity accuracy ≤ 0.02 mm measured in the drill spindle Thick-walled steel column for high force absorption and stability Massive, generously sized base plate with T-slots Dimensions and weights Column diameter 92 mm Length approx. 945 mm Width/Depth approx. 485 mm Height approx. 2040 mm Weight approx. 162 kg Drilling capacity Drilling capacity in steel (S235JR) 30 mm Continuous drilling capacity in steel (S235JR) 25 mm Drill table Working surface length 355 mm Working surface width 355 mm Type of T-slots diagonal T-slot size 14 mm Number of T-slots 2 Rotation 360° Tilt 45° Distance spindle - drill table max. 784 mm Speed range Speed range 120 – 1810 min⁻¹ Number of speed ranges 9 Electrical data Connection voltage 400 V Mains frequency 50 Hz Machine base Distance spindle - machine base max. 1470 mm Working surface length 230 mm Working surface width 300 mm T-slot size 16 mm Number of T-slots 2 Spindle Quill stroke 125 mm Spindle mount MK 4 Overhang 270 mm Location: In stock at warehouse 54634 Bitburg - immediately available - Bsdpfog Uaiusx Afmslk

Condition: as good as new (ex-display), Year of construction: 2026, OPTIdrill D 26PRO - Pillar drilling machine Bledpfx Afjdqzbnsmjk Bench and pillar drilling machine with V-belt drive User-friendly safety switch according to IP 54 with undervoltage release and separate emergency stop button 400-volt models with right/left rotation Drilling depth stop Precisely manufactured drilling table with diagonally running T-slots Height adjustment of the drilling table via rack and pinion Drilling table can be tilted ± 45° and rotated 360° V-belt cover with safety switch Aluminum die-cast quill lever in one piece with soft-grip handles Industrial motor Precision spindle bore Machine operation including safety electricals in 24 V DC Guaranteed run-out accuracy

Condition: good (used), Year of construction: 1980, machine/vehicle number: 622336, Offer 22681 Blsdszp E Ucepfx Afmsk Technical Data: - Drilling capacity in steel ST 60: 30 mm - Drill spindle mounting: MK 3 - Drill spindle stroke: 160 mm - 9 drill spindle speeds: 90 - 1450 rpm - Overhang: 300 mm - Table with 2 T-slots - Table dimensions: 400 x 450 mm - Max. distance table - drill spindle: 660 mm - Height adjustable via rack and pinion with hand crank - Drive: 400 V / 1.2 kW - Space requirement: approx. W 600 x H 2100 x D 850 mm - Weight: approx. 300 kg - Including: - Drill chuck - 10 HSS drill bits, 8 – 20 mm

Condition: ready for operation (used), Alzmetall AB 35 HST / Bench drill press & Walter Gras Arbo3 quick-change head -Drilling capacity / steel approx. 40mm -Drilling capacity / cast iron approx. 45mm -Threading capacity max. M25 -Spindle taper MK 4 -Spindle stroke 180mm -Speed range (VARIABLE) 65 - 1750 rpm -Switchable speed range 130-480 / 480-1750 rpm -Automatic feed rates 0.1-0.2-0.3mm/rev -Drilling depth adjustable via depth scale -Speed indicator -Right / left rotation -Swiveling drill head with tool -Height-adjustable work table via hand crank -Coolant system -Emergency stop -Work light Bljdpfx Afezn Unvomek Dimensions: L x W x H 1 x 0.8 x 2.1 meters / Weight approx. 1200KG Errors and omissions excepted.

Condition: ready for operation (used), Bench drill – ALZMETALL AB 35 S - Drilling capacity in steel approx. 45 mm - Drilling capacity in cast iron approx. 48 mm - Spindle mount MK 4 - Arm reach approx. 350 mm - Drilling stroke approx. 180 mm - Spindle speeds / 2 stages / 65 - 1450 rpm (VARIABLE) - Automatic feed rates 0.1-0.2-0.3-0.4 mm/rev - Drilling depth stop - Table clamping surface approx. 600x460 mm - Table adjustment approx. 600 mm - Table height adjustable via crank Blodpfeznlf Eox Afmsk - Column diameter approx. 200 mm - Motor power approx. 3.5 kW - Coolant system - Work light - Speed indicator Dimensions: L x W x H 1.1 x 0.7 x 2.1 meters / Weight approx. 1200 kg Errors and omissions excepted.

Condition: ready for operation (used), functionality: fully functional, input voltage: 380 V, spindle mount: MK 3, total width: 600 mm, total length: 900 mm, total height: 1,900 mm, table width: 400 mm, table length: 550 mm, overall weight: 360 kg, spindle speed (max.): 2,800 rpm, spindle speed (min.): 160 rpm, spindle stroke: 150 mm, Equipment: rotational speed infinitely variable, type plate available, 3-phase 380V, 2-speed motor is running fine. Stepless speed adjustment thanks to variomatic spindle drive. Spindle RPM adjustable from 160 up to 2800. MT3 spindle taper. Albrecht 1-13mm drill chuck included. Chuck eject tool included. Drilling depth adjustable. Maximum drilling depth: 150mm Table size: 550x400mm Table height adjustable. Weight: 360KG Overall dimensions: 90x60x190cm Made in Germany Bsdpfewy Ec Dex Afmolk Overall good condition. Contact us for shipping possibilities! € 2,350.00

Condition: used, Column Drilling Machine PRECIS Ø 23 mm Cone: CM2 Maxi diameter: Ø 23 mm Rotation: from 165 to 4400 RPM Table size: 390 x 190 mm Spindle travel: 100 mm Column diameter: Ø 120 mm Throat depth: 240 mm 2 speed motor Mini chuck/table height: 100 mm Maxi chuck/table height: 350 mm Bodpszmxzkofx Afmslk Manual descent Manual hydraulic lifting of the table Voltage: 380 V Width: 700 mm Depth: 1000 mm Total height: 1800 mm Weight: approx 800 kg

Condition: used, Workbench Column Drilling Machine FLOTT type 16 STG/R2 Spindle: CM2 Spindle exit: 100 mm Spindle speed: from 80 to 2000 RPM Table size: Length 340 mm x Width 280 mm Maxi distance spindle nose/table (lower table): 400 mm Throat depth: 240 mm 2 speed motor 2,2 kW Drilling/tapping function Adjustment by belt variator Electronic RPM speed not working Voltage: 380 V Width: 500 mm Depth800 mm Total height: 1100 mm Bsdjzmxymjpfx Afmolk Weight: approx 150 kg

Condition: used, Year of construction: 1982, Column Drilling Machine GSP type 205 R Spindle: Ø 100 mm Cone CM4 Spindle exit: Ø 300 mm Rotation: from 12 to 1800 RPM Table size: 800 x 400 mm Year of construction: 1982 Maxi distance spindle nose/tablein low position: 700 mm Mini distance spindle nose/table: 250 mm Throat depth: 400 mm Cross-table 1150 x 400 mm Drilling/tapping function Automatic spindle advance The manual descent of the spindle is hard (works perfectly in automatic advance) Manual raising/lowering of the table Voltage: 380 V Width: 1300 mm Depth: 1700 mm Total height: 2700 mm Bljdpfx Afjzmxygsmjk Weight: approx 1,5 T

Condition: used, Year of construction: 1997, Workbench Column Drilling Machine CINCINNATI PE 32 Year of construction: 1997 Spindle: CM3 Spindle exit: 150 mm Spindle speed: from 100 to 3800 RPM Table travel X: 290 mm / Travel Y: 150 mm Speed variator by belt variator Maxi height base/spindle nose: 500 mm Mini height base/spindle nose: 260 mm Throat depth: 300 mm Spindle sleeve diameter: Ø 80 mm Bsdpfszmxx Nsx Afmolk Equipped with one cross table dimensions: L 430 x W 240 mm Voltage: 380 V Width: 900 mm Depth: 1100 mm Total height on base: 2000 mm Weight: approx 400 kg

Condition: good (used), Column Drilling Machine ALZMETALL AB3 ESV Spindle: CM3 Rotation: 1 range 220 -800 RPM + 1 range 800-2900 RPM Table size: Length 615 mm x Width 470 mm Spindle travel: 160 mm Throat depth: 280 mm Speed adjustment by belt drive Rotative table at 360° Automatic Descent Blsdpfx Aszmxw Eefmsk 3 speeds: 0,006 - 0,12 - 0,18 mm/min. Lubricant pump Voltage: 380 V Width: 800 mm Depth: 1300 mm Total height: 1900 mm Weight: approx 800 kg

Condition: good (used), Type: SSB 3 A Machine No.: 5607 Year of manufacture: 1973 Bljdoxlqxfspfx Afmjk Equipment: - MK3 quill - Machine lamp - Quick-action drill chuck incl. morse taper arbor, clamping range 3-16 mm - Infinitely variable speeds Range 1: 0-900 rpm Range 2: 0-1700 rpm - Thread cutting device Condition: good, workshop-tested, speed variator with new bearings

Condition: new, Infinitely variable pillar drill with fully-fledged tapping unit. Equipped with digital speed display as standard. Drilling table adjustable via rack and swivels around the column. Motor protection. Technical data: Drilling capacity: 40 mm Thread cutting: M 24 Spindle: MK 4 Drilling depth: 150 mm Spindle speeds, infinitely variable Range A: 65 - 540 1/min Range B: 245 - 2000 1/min throat depth: 265 mm Quill feed: 0.05 / 0.1 / 0.2 mm/rev Column diameter: 115 mm Table size: 560 x 470 mm / 14 mm Base plate size: 685 x 485 mm Dimensions, approx. (W x D x H): 580 x 950 x 2000 mm Connected load: 1.7 kVA Weight, approx.: 370 kg Equipment - Gearbox reduction gear - Large machine table - Digital speed display - Stepless speed adjustment - Thread cutting device - Table clamping and height adjustment from the front Bsdpfx Afsqfdywomolk - Drilling depth stop - Overload protection Scope of delivery: - Coolant device - Two MK 3/2 reducing sleeves - LED machine light - Height-adjustable protective cover with micro limit switch - Operating instructions - CE/IEC conformity

Condition: new, Technical Specifications: Tool Holder: MT 3 Drilling Capacity: 25 mm Drilling Depth: 120 mm Throat: 250 mm Speed Range, Continuous: 0 - 2000 rpm Table Size: 470 x 420 mm Column Diameter: 100 mm Motor Power: 0.75 kW Weight, Approx.: 200 kg Dimensions (W x D x H), Approx.: 630 x 850 x 1760 mm Features: - Continuous speed adjustment with digital display Bjdpfxovnrgaj Afmolk - Height-adjustable spindle guard with micro limit switch - Base plate with T-slots - Emergency Stop Push Button - Star Grip - CE

Condition: new, Modern, precision pillar drilling machine based on the proven UNIMAX 3 concept, featuring stepless feed drive, automatic tool ejector, and series-standard chip breakage control. The digital display shows feed rate, speed, and drilling depth. Reversible switch for right/left rotation. Emergency stop button. Full motor protection. Pre-configured machine with special equipment including a threading unit, single-cut function, and LED lamp. Normal drilling capacity in E 335: 30 mm Threading capacity: M 20 Spindle: MK 3 Feed rate steplessly adjustable in the range: 30 - 400 mm/min Drilling depth programmable: 125 mm Overhang: 260 mm Blodjf Ey Auspfx Afmjk Distance spindle/table: 90 to 840 mm Table surface: 500 x 365 mm Column diameter: 110 mm Overall height: 1,900 mm Weight: 280 kg Motor with pole change: 0.8/1.5 kW Spindle speeds steplessly adjustable: Drilling range A: 80 - 1,440 rpm Drilling range B: 180 - 3,200 rpm Pre-configured machine including special equipment: - Threading unit - Single-cut function - LED lamp

Condition: new, Continuous drilling capacity: 25 mm Normal drilling capacity: 30 mm Thread cutting capacity: M 12 Spindle: MK 3 Drilling depth: 135 mm Spindle speeds, continuously variable: 150 - 3000 rpm Table size: 460 x 360 mm Weight: 225 kg Power supply: 400 Volt, 50 Hz Features: - Thread cutting device - Digital display for speed, standard - Coolant system - LED machine light - Continuously variable speed control - 24 V electrical system - Base plate with T-slots Bjdpfx Afod R Acbemelk - Drilling table adjustable via rack and pinion and pivotable around the column - Emergency stop button - Full motor protection - Star handle - CE compliant

Condition: new, Drilling capacity max.: 35 mm Threading: M 24 Tool holder: MK 4 Spindle speeds, stepless: 65 - 2000 rpm Overhang: 265 mm Drilling depth: 150 mm Quill feed: 0.05 / 0.1 / 0.2 mm/rev Column diameter: 115 mm Table size / T-slot size: 685 x 485 mm / 14 mm Blsdpod Sd Tvofx Afmok Motor power: 1.5 kW Machine dimensions (W x D x H): 950 x 580 x 2000 mm Weight approx.: 385 kg Features: - Vario drive for stepless adjustment of the desired speed - Quill feed manually or via mechanical feed - Set speed can be quickly and easily read on the digital display - Stable cast iron table with T-slots and coolant channel - Adjustable drilling depth stop, drilling depth can be read on a scale - Threading device - Gearbox pre-selection - CE / IEC, German documentation and German service Scope of supply: - Table clamp and height adjustment from the front - Quick-change drill chuck 1 - 16 mm / B 18 - Drill chuck arbor MK 3 / B 18 - Coolant system - Digital speed display - Reducing sleeves MK 3/2, MK 3/1 - LED machine light - Height-adjustable protective cover

Condition: new, Drilling capacity max.: 30 mm Thread cutting: M 16 Tool holder: MK 3 Spindle speeds, stepless: 150 - 2500 rpm Overhang: 265 mm Drilling depth: 150 mm Quill feed: 0.05 / 0.1 / 0.2 mm/rev Column diameter: 92 mm Table size / T-slot size: 500 x 400 mm / 14 mm Motor power: 1.5 kW Machine dimensions (W x D x H): 640 x 850 x 1850 mm Weight approx.: 265 kg Features: - Vario drive for stepless adjustment of the desired speed - Quill feed can be operated manually or via mechanical feed - Set speed can be quickly and easily read on a digital display - Sturdy cast iron table with T-slots and coolant trough - Adjustable drilling depth stop, drilling depth can be read on a scale Bjdpfjd R Nv Iox Afmolk - Thread cutting device - CE / IEC, German documentation and German service Scope of supply: - Quick-change drill chuck 1 - 16 mm / B 18 - Drill chuck arbor MK 3 / B 18 - Coolant system - Digital speed display - Reducing sleeves MK 3/2, MK 3/1 - LED machine light - Height-adjustable protective cover

Condition: new, Stepless pillar drilling machine for versatile applications. Equipped with digital speed display as standard. Drilling table adjustable via toothed rack and swivels around the column. Motor protection switch, star grip. Picture shows SB 25 S Technical data: Drilling capacity: 30 mm spindle: MK 3 Bsdep Duagopfx Afmslk drilling depth: 130 mm throat depth: 250 mm spindle speed, infinitely variable: 230 - 2700 rpm table size: 460 x 360 mm column diameter: 100 mm dimensions, approx. (WxDxH): 600 x 810 x 1780 mm motor power: 1,5 kW Mains connection: 400 V Weight, approx.: 230 kg Equipment: - Stepless speed adjustment with digital display - right / left rotation - T-slot stones - 24 V electrics - Height adjustable spindle protection device with micro limit switch - Base plate with T-slots - Drilling table adjustable via rack and worm gear and swivels around column - Reversing switch for R/L-run (option) Scope of delivery: - Machine light - emergency stop pushbutton - full motor protection - star grip - CE

Condition: new, MIOTAL® GB 50 VG geared pillar drilling machine with thread cutting device Bjdpfx Aopxmliefmelk Technical data: Drilling capacity: 50 mm tool holder: MK 4 quill stroke: 200 mm tapping capacity: M33 face milling cutter: 100 mm end mill: 25 mm throat depth: 340 mm table size: 600 x 600 mm column diameter: 180 mm number of T-slots: 2 T-slot size: 22 x 35 mm motor power: 3 kW Weight, approx.: 750 kg Equipment: - Coolant device - Automatic spindle feed - Thread cutting device - LED machine light - Height adjustable protective cover - Table rotatable - Manual fine feed - Limit switch protected spindle