Used Upright drilling machines for sale (72)

Condition: good (used), Make IXION Type: BST16 Drilling capacity in steel (diameter) 3 - 16 mm Clamping height max. 1500 mm Weight 300 kg max. clamping height: 1,500 mm Machine weight: 300 kg Iedpeu T Ra Defx Aacsbc Drilling capacity: with ST 60: 3.5 mm - 16 mm Ø with GG-20: 3 mm - 16 mm Ø

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, spindle mount: MK 2, total height: 900 mm, total width: 400 mm, total length: 720 mm, table width: 290 mm, table length: 340 mm, spindle stroke: 105 mm, spindle speed (max.): 3,600 rpm, spindle speed (min.): 200 rpm, type of input current: three-phase, input voltage: 380 V, Equipment: rotational speed infinitely variable, type plate available, 3-phase 380 volt, 2-speed motor runs perfectly. Stepless speed adjustment thanks to the variomatic spindle drive. Spindle RPM adjustable from 200 up to 3600. MT2 spindle taper. Ibjdoxnry Nspfx Aacsc Metabo 1-13mm drill chuck included. Head height adjustable. Year of manufacture: 2000 Table size: 340x290mm Drilling depth adjustable. Max drilling depth: 105mm. Made in Germany. Very good overall condition! Overall dimensions: 73x40x90cm Contact us for shipping possibilities! € 1,500.00 EX VAT!

Condition: good (used), Year of construction: 2020, Drill, pillar drill, column drill, tapping machine -Manufacturer: Bernardo, Gearbox - Pillar Drill Type GB 35 Vario -Spindle mount: MK3 -Motor: 1.5 kW -Speeds: 65 - 460 rpm / 460 - 3250 rpm, continuously variable right-left rotation -Feed: 0.1/0.2/0.3 mm/rev. -Clamping table: 420 x 345 mm / swiveling -Travel: 340 mm -Spindle stroke: 160 mm -Projection: 320 mm -Column Ø: 120 mm -Thread cutting device -Coolant system: 20 l/min -Dimensions: 870/560/H2340 mm -Weight: 401 kg Ibedpfx Aowrbpdsacoc

Condition: excellent (used), bore capacity in steel (diameter) 35 / 45 mm throat 330 mm Ibodpfxjunt Rpe Aacec bore stroke 200 mm morse taper MK 4 table diameter 600 mm spindle turning speed - stepless 80 - 1800 U/min table adjustment - upper 450 mm spindle stroke 400 mm total power requirement 2,5 kW weight of the machine ca. 1,4 t dimensions of the machine ca. 2,5 x 1,2 x 0,8 m automatic feed.

Condition: ready for operation (used), Reibo Suisse Column Drilling Machine Clamping tools Cross table Right/Left rotation Coolant pump Vice Mk4 spindle taper Speed: 1050-530, 750-375, 265-132, 190-95 Ibedpfowz Hymox Aacjc Feeds: 0.05 0.12 0.2 Cross table: Y: 25cm X: 49cm Weight approx. 1500kg L: 120cm W: 120cm H: Fully extended approx. 300cm

Condition: used, Year of construction: 1980, taper MK 4 serial number 520 Isdpfx Aew Sydlsacobc weight of the machine ca. 440 kg

Condition: used, drilling capacity steel/GG: 30/40 mm spindle taper: 3 MK arm length: 350 mm table size: 350 Ø mm spindle sleeve stroke: 150 mm spindle turning speed range: 155; 280; 470 u. 790 rpm carriages: 0,1/0,2/0,3 mm Ibedpfxsb Hl H Ie Aacoc engine: 380 V, 1,1 kW space needed: 950 x 530 x 2300 mm weight: 445 kg

Condition: ready for operation (used), functionality: fully functional, spindle mount: MK 3, total height: 1,800 mm, total width: 500 mm, total length: 600 mm, table width: 500 mm, table length: 355 mm, spindle speed (max.): 3,020 rpm, spindle speed (min.): 100 rpm, type of input current: three-phase, Equipment: type plate available, 3 Phase 380V, 2 speed motor is running fine! Geared head with 8 speeds. Spindle RPM adjustable from 100 up to 3020. MT3 spindle taper. Tool ejector. Maximum drilling depth: 130 mm Ibodpfx Aaexl Hpaecjc Table size: 500x355 mm Head & table height adjustable. Good working condition! Made in Sweden. Overall dimensions: 60x50x180 cm Contact us for shipping possibilities! € 1,850.00 EX VAT!

Condition: new, mount diameter: 50 mm, clearance between the columns: 375 mm, spindle mount: MK 4, total height: 2,450 mm, total width: 1,020 mm, total length: 610 mm, table width: 600 mm, table length: 600 mm, overall weight: 820 kg, quill stroke: 230 mm, Column Drill Maximum drilling capacity Ø 50 mm Spindle holder MK 4 Iodpfjw I Tq Rsx Aacsbc Spindle speed min. 54 rpm Spindle speed max. 2.090 rpm Stroke of the drill pinole 230 mm Distance column to drilling center line 375 mm Drilling table size 600 x 600 mm Length 610 mm Depth 1020 mm Height 2450 mm Weight 820 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Column Drilling Machine ALZMETALL AB3 ESB Spindle: CM3 Rotation: 1 range 220 -800 RPM + 1 range 800-2900 RPM Table size: Length 615 mm x Width 470 mm Spindle travel: 160 mm Throat depth: 280 mm Speed adjustment by belt drive Rotative table at 360° Automatic Descent 3 speeds: 0,006 - 0,12 - 0,18 mm/min. Lubricant pump Ibjdpfsi Tvv Aox Aacjc Voltage: 380 V Width: 800 mm Depth: 1300 mm Total height: 1900 mm Weight: approx 800 kg

Year of construction: 1992, condition: excellent (used), machine/vehicle number: 238828, Available: Immediately Ibodpfx Aepr Uvroacec

Condition: good (used), Boorcapaciteit in staal (diameter) 30 mm Boorslag 170 mm Fastening MK 4 Sheet dimensions 750 x 550 mm Isdpfx Aevgb Eieacobc Toerental 70 - 1750 omw/min

Year of construction: 1984, condition: ready for operation (used), drilling capacity steel/GG: 18/23 mm spindle taper: 2 MK arm length: 250 mm Ibedpfx Aaok Tzu Rjcoc table size: 250 x 370 mm spindle turning speed range: 400 - 5000 rpm engine: 0,48/0,6 kW space needed: 750 x 500 x 1670 mm weight: 130 kg

Condition: good (used), functionality: fully functional, mount diameter: 80 mm, throat depth: 200 mm, spindle mount: MK 1, table width: 320 mm, table length: 250 mm, stroke length: 70 mm, type of input current: three-phase, rotational speed (max.): 1,800 rpm, Equipment: lighting, type plate available, Drilling machine, drilling machine, stand drilling machine, column drilling machine -Manufacturer: Webo, G6 column drilling machine -Motor: 0.75kW 380v 50 Hz morse MK-1 chuck max drill size: M6 Iedpfx Aaewzaqxecsbc -Gearbox: with flat belt coolant pump automatic-manual operation spindle speed per minute -Table size: 320 x 250 mm -Spindle stroke: 70 mm -Reach: 200 mm -Column Ø: 80 mm -Dimensions: 450/600/H1800 mm -Weight: ca 190 kg

Condition: new, mount diameter: 40 mm, clearance between the columns: 350 mm, spindle mount: MK 4, total height: 2,220 mm, total width: 930 mm, total length: 560 mm, table width: 560 mm, table length: 560 mm, overall weight: 465 kg, quill stroke: 180 mm, spindle speed (max.): 1,450 rpm, spindle speed (min.): 50 rpm, Column Drill Maximum drilling capacity Ø 40 mm Spindle holder MK 4 Spindle speed min. 50 rpm Spindle speed max. 1.450 rpm Stroke of the drill pinole 180 mm Distance column to drilling center line 350 mm Drilling table size 560 x 560 mm Length 560 mm Ibedpow I S Nfjfx Aacec Depth 930 mm Height 2220 mm Weight 465 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 1980, voltage 50 V Ijdpfsvu Hk Tox Aacjbc frequency 50 Hz ampere 3,7 A 21882 speeds: 3

Condition: new, Motor ----- 1100W - 230V - 1Phase Drilling capacity ----- 25 mm Pin stroke ----- 120 mm Spindle mounting ----- MK3 Number of speeds ----- 12 Spindle speed ----- 150-2450 rpm Work table ----- 350 x 350 mm Foot ----- 510 x 350 mm Column diameter ----- 92 mm Total height ----- 1680 mm Weight ----- 108 kg Packaging ----- 1430 x 660 x 320 mm INCLUDED * Digital depth stop Isdpfjga T E Rsx Aacebc * CE cover * Laser device * LED lighting * CE emergency stop * Drill head with MK3 adaption * Driven wedge

Condition: new, spindle mount: MK 4, total height: 2,220 mm, total width: 930 mm, total length: 560 mm, table width: 560 mm, table length: 560 mm, overall weight: 465 kg, quill stroke: 180 mm, drilling capacity: 40 mm, Equipment: type plate available, Maximum drilling capacity Ø 40 mm Spindle holder MK-4 Spindle speed min. 50 rpm Isdew A Iv Eopfx Aacsbc Spindle speed max. 1.450 rpm Stroke of the drill pinole 180 mm Distance column to drilling center line 350 mm Drilling table size 560 x 560 mm Length 560 mm Depth 930 mm Height 2220 mm Weight 465 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 1980, 1980 tool taper MK 205 - 1450 m/min. boring range: 3 - 40 mm +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Ijdpfx Ajr Dv Tgeacebc +++++

Condition: used, Year of construction: 1980, ja feed 80 - 800 m/min 1848 weight of the machine ca. 2,2 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Iodpfxoix Rdms Aacobc +++++

Condition: used, Year of construction: 1965, 40-1080 Ibjdpfx Aeiyzqqeacec tool taper MK 5 weight of the machine ca. 2 t feed . +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1990, bore capacity in steel (diameter) 3 - 16 mm max. 1500 mm weight 300 kg Isdpohmribjfx Aacebc +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1990, ja vice 1 quill stroke ja 2.000 mm Iedofym Huspfx Aacebc weight of the machine ca. 790 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1962, frequency 50 Hz voltage 380 V Iodsrxg S Tepfx Aacebc 220 V connected load 2,6 kVA rated current 6,1 A weight of the machine ca. 1 t

Condition: used, Year of construction: 1979, taper MK MK5 round table ja Ibjdpfx Aof Ek Rieacjc weight of the machine ca. 1.200 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++