Column drilling machine blood HARDT type 4BA
Engine No. 9123 built circa 1968
Drilling power 40 mm
Spindle cone MK 4 - long sleeve
Throat depth 290 mm
Pinolhub 200 mm
Table size ø 500 mm
Column diameter 155 mm
Spindle speed 112-1120 RPM 6 levels
Feed rate 0.08 - 0.12 - 0.24 mm / U 3 levels
Motor output 1,5 kW
Power supply 380 v, 50 Hz
Bc9z0kfdkl
-6 speed 3 gears and two switchable during transmission levels =
-Clamping surface in the tool's base 400 x 400 mm
-Table height adjustment with hand cr...
pillar drilling machine make FLOTT type SB 16
H2m3kxt
machine # 251600092, year of construction 1992
technical data:
drilling capacity 16 mm
spindle mounting MK 2
6 spindle speeds 430-680-1120-1800-
2800-4500 rpm.
quill stroke 100 mm
table size 220 x 320 mm
throat 250 mm
drive power 0,75 kW
column diameter 100 mm
dimensions approx. 400 x 700 x 1800 mm
weight approx. 144 kg
used, in good condition
Column drilling machine Andreas Plum
Btulirond8
Type KB50
The machine is in a super condition fully functional.
Ex location, free loaded.
It is a used machine, therefore we sell under
Exclusion of any warranty.
OFFER 20297
Suvz7k
Technical data:
- Drilling capacity in steel ST 60 28 mm
- Drilling capacity in steel ST 60 32 mm
- Drilling spindle mounting MK 3-long spindle
- Drilling spindle stroke 180 mm
- 10 drilling spindle speeds 250 - 3000 rpm
- throat approx. 290 mm
- max. distance table - drilling spindle approx. 620 mm
- table with 2 T-slots height adjustable 520 x 450 mm
- drive 400 V / 1,0 / 1,3 kW
- space requirement approx. W 600 x H 1850 x D 700 mm
- weight approx. 280 kg
spindle mount MK 2
Wnomnr2l
drilling capacity 16/20 mm
drilling depth 100 mm
year of manufacture 1973
throat 250 mm
table size 220 x 360 mm
spindle speed infinitely variable 300 - 2800 rpm
motor 380 V 1,1 KW
external dimensions:
width 500 mm
depth 600 mm
height 1800 mm
Weight approx. 175 kg
Sold ex location.
OPTIdrill D 26PRO - column drilling machine
Bench and column drilling machine with belt drive
Easy to use security switch to IP 54 with undervoltage release and separate emergency stop pushbutton
400 Volt models with right/left rotation
Drilling depth stop
Precision machined table with diagonal T-slots
Height adjustment of the drilling table with rack and pinion
Drill table ± 45 ° tilt and 360 °
V-belt cover with safety switch
Aluminium die-cast tailstock lever from one piece with Softgrip-hand...
Column drilling machine FLOTT type M5 ST
Machine. No. 48 330 018 Year of construction 2002
continuous drilling capacity drilling machine 35 mm
continuous drilling capacity multi-spindle drilling head 14 mm
spindle receptacle MK 4 - short sleeve
Spindle adaptor multi-spindle drilling head Adjusting sleeve Ø 16 mm
throat 300 mm
Btuuguxgb8
Pinol stroke 160 mm
table size 590 x 450 mm
column diameter 125 mm
spindle speed 45 - 3200 rpm infinitely variable
motor power 1,5 and 3,0 kW
Mains connection 40...
Gear column drilling machine make WMW VEB Saalfeld type BS 25B
machine. # 9587/59
technical data:
drilling capacity in steel - dia. 4 - 32 mm
Thread cutting ST 60 / Alu up to M 20 / M 32
spindle adaptor MK 3
throat 280 mm
drilling stroke 150 mm
4 spindle speeds 125 - 710 rpm.
4 feeds 0.10 / 0.16 / 0.25
table size with trough 570 x 475 mm
table size clamping surface 450 x 355 mm
Drive power 3 kW
Weight 700 kg
outer dimensions 900 x 570 x 2400 mm
with
- automatic feeds
- tapping with compensating ...
Column drilling machine, table/rest size 260x260 mm, column D. 80 mm,
spindle stroke 100 mm, drive 0,5 KW 720/1450 rpm,
Bsi0xz72pn
dimension L/W/H 520x360x980 mm
OFFER 21093
Technical data:
- Drilling capacity in steel ST 60 45 mm
- Drilling capacity in steel ST 60 45 mm
Ytm0no
- Drilling spindle holder MK 4
- Tapping device up to M 39
- drilling spindle stroke 220 mm
- Drilling spindle speeds 45 - 2000 rpm
- 4 feeds 0,1 / 0,4 mm/rev
- throat 400 mm
- max. distance table - drilling spindle 720 mm
- max. distance table - base plate 1250 mm
- table with 2 T-slots 630 x 500 mm
- Height adjustable via toothed rack with hand crank
- drive 400 V...
with the following equipment:
- 7" TFT-LCD display with touch function
- Thread cutting device
- infinitely variable speed adjustment, by means of an adjustment lever
- Spindle protection with electrical fuse
- Spindle start/stop button
- Mushroom pushbutton for emergency stop, - Lockable main switch
- Clockwise and anti-clockwise rotation through protection control
- Feed overload protection
- Machine oil Initial filling
- LED machine light pos. 12
- Foot switch pos. 20.5
- Technology computer ...
throat depth: 350drilling diameter: 40/45
Bv8irqlkm
Column drilling machine FLOTT type M5 ST
Machine. No. 48 330 017 Year of construction 2002
continuous drilling capacity drilling machine 35 mm
continuous drilling capacity multi-spindle drilling head 14 mm
spindle receptacle MK 4 - short sleeve
Spindle adaptor multi-spindle drilling head Adjusting sleeve Ø 16 mm
throat 300 mm
Pinol stroke 160 mm
table size 590 x 450 mm
column diameter 125 mm
spindle speed 45 - 3200 rpm infinitely variable
motor power 1,5 and 3,0 kW
Mains connection 400 Volt, 50 ...
Gear column drilling machine make KAZANLIK type BK 32
make # 5137 year of construction 1966
technical data:
gr. drilling capacity 32 mm
spindle mounting MK 3
Bl9pyuqwim
6 spindle speeds 85 - 1500 rpm.
4 automatic feeds 0,1 - 0,4 mm/rev.
quill stroke 250 mm
table surface 400 x 400 mm
table can be swivelled to the right and left
throat 320 mm
column diameter 160 mm
clamping surface at foot 560 x 440 mm
distance spindle / foot 934 / 715 mm
distance spindle / table 68 / 715 mm
Drive power 2,2 kW
out...
Recording Mk 3
Jfd8289
Infinitely variable speed control 110 - 2900 rpm
Automatic feed
Drilling performance: steel 60, 22 mm / M18
Adjustment drilling head & table each 300 mm
Speed (stepless) 37-3600 RPM
Spindle diameter 65 mm
Overhang 300 mm
Table surface 800x390 mm
Spindle feed 0.02-0.04-0.1-0.12-0.25-0.6 mm/U
Taper in spindle ACIERA attachment bracket
Stroke quill 120 mm
Dimension (WxDxH) 80x105x175 cm
Weight 900 kg
Bpbcmr7okf
Accessories:
1 pc. drill chuck 1-13 mm
1 pc. adapter sleeve SK30/MT1
1 pc. adapter sleeve SK30/MT2
1 pc. manual in German
Alzmetall column drill AB 34 iTronic with the following basic equipment:
Electromagnetic feed clutch, lockable main switch, motor protection switch,
Mushroom pushbutton, speed adjustment, digital speed display, protection class IP 54,
Motor insulation class "F" (155), spindle protection,
and with the following additional equipment:
- Pos. 12 LED machine light
- Pos. 20.4 Possibility to change the direction of spindle rotation
- Pos. 20.5 Foot switch for thread cutting device
- Item 37.5 Technolo...
We offer you:
Ytlw9c
Column drilling machine
Manufacturer: Alzmetall
Type: AB3ESV
Location: 22946 Trittau
Available after arrangement (approx. 2 - 4 weeks)
The price is understood to be GROSS.
Upon request, you will of course receive a proper invoice with VAT.
PLEASE ALSO NOTE OUR OTHER AUCTIONS - YOU CAN ALSO VISIT OUR ITEMS ON SITE!
***Changes and errors in the technical data and information and
subject to prior sale!
Our AGBs apply. We will gladly send you the terms and conditions by mail, y...
Column drilling machine ALZMETALL type from 60 S
Masch. No. 228 built in 1987
Drilling capacity in steel 65 mm
Drilling capacity in cast iron 75 mm
Spindle mount Mt 5 - short sleeve
Throat depth 400 mm
Pinolhub 240 mm
Table size 730 x 540 mm
Column diameter 260 mm
Bdnlrr20vw
40-1200 RPM infinitely variable spindle speed
Motor power 5 and 7.5 kW pole-shift bar
Power supply 400 Volt, 50 Hz
-automatic feed in 5 levels of 0.1 0,14-0,2 0.28 0.4 mm / Rev
-Transmission level for high torque at low spee...
Drilling capacity in steel 25 mm
Throat mm
Delivery time approx. 6-8 weeks from order placement
drilling capacity (steel/cast iron): 25/30 mm
Thread cutting capacity (steel/cast iron): M18 / M22
MK: 3
Speeds: 120 - 6,000 rpm (infinitely variable)
distance spindle-column: 250 mm
distance spindle-table: 85 - 635 mm
distance spindle-foot: 1.195 mm
Column diameter: 100 mm
table: 300 x 270 mm
foot size: 600 x 380 mm
Engine: 1.5 HP
Bfq07q3xhl
length: 400 mm
width: 655 mm
Height: 1.185 mm
Weight: 280 k...
Drilling capacity in steel (diameter) 50 mm
Throat 350 mm
drilling stroke 180 mm
table top size 600x400 mm
Speed 50-640 rpm
spindle mounting MK 5
Bs9ru0lesq
feed - automatic 0,1-0,3 mm
Machine is defective / quill has failed.
Tool holder: MK 3
Drilling capacity: 30 mm
Speed range: (6) 80 - 700 rpm
Bqafyidc
spindle stroke: 150 mm
table size: 550 x 400 mm
throat depth: 280 mm
column diameter: 120 mm
Motor power:1,1 kW
Connection: 380 V / 16 A
Weight approx.: 250 kg
Dimensions LxWxH, approx.: 880 x 550 x 1900 mm
Equipment:
- Machined base with T-slots
- R/L-run
- Drilling depth stop
- Drill chuck Albrecht 1-13
Table size: 514 x 360 mm
Speed: 160-2250 U/min
Spindle intake: MK 3
Spindle hub: 120 mm
Reprimrose: 0.1 and 0.2 mm/U
Spindle offload: 293 mm
Drilling power: Steel ST 60 32 mm, cast 38 mm
Drilling: Steel ST 60 40 mm
Thread: Steel St 60 M 24, Guss M 30
Distance Spindel/Table: min 117/max 701 mm
Emzwixu
Connection value: 2 KW
Weight: 0.29 t
Right-left run
Some available immediately from stock by manufacturer
The price refers to the basic machine
We are happy to submit an individual offer to you
Power: 0,75kW
Speed range: 280 - 2600 rpm
Speed steps: stepless
Spindle mounting: MK-3
Drilling stroke: approx. 80 mm
Spindle throat: approx. 220 mm
Oxf7z
Weight: 100 kg
Column drilling machine WEBO type Gradua 50
Built in about 1980
Drilling capacity 50 mm
Spindle cone MK 5 - long sleeve
Throat depth 360 mm
Pinolhub 240 mm
Table size 560 x 560 mm
Cf3pmpkq
Column diameter 240 mm
Spindle speed 40-900 RPM 8 levels
Feed 0.12 - 0.19 - 0.26 - 0.4 - 0.5 - 0.76 1.10 - 1.70 mm / U 8 levels
Motor power 4 / 5,5 kW pole changing bar
Power supply 380 v, 50 Hz
-Spindle speed through the 2-speed motor and gear unit 4
-Motor speed level I and II for clockwise and counterclockw...
Drilling capacity in steel 25 mm
Throat mm
Delivery time approx. 6-8 weeks from order placement
Drilling capacity (steel/cast iron): 25 mm
Bfq070n32m
Thread cutting capacity (steel/cast iron): M22
MK: 3
Speeds: 45 - 3,100 rpm (infinitely variable)
quill stroke: 120 mm
distance spindle-column: 250 mm
distance spindle-table: 0 - 820 mm
distance spindle-foot: 1.220 mm
Column diameter: 100 mm
table: 380 x 400 mm
foot size: 655 x 400 mm
Engine: 1.5 HP
length: 800 mm
width: 600 mm
height: 2.140 mm
Wei...
Duration / ALB ear power 30/35 mm
Thread cutting capacity Max M24 (Steigungsabhängig)
Hand-reversing switch for forward link.
Undervoltage, thermal overload protection,
Spindle MK 3
Drilling depth 125 mm
Beka7ewo92
Projection 280 mm
Column diameter 110 mm
Usable surface [BxL] 420 x 340 mm
Speed display scale
Drilling depth indicator scale
Drilling depth stop with fine adjustment
Table height with rack and pinion
Motor three-phase 400 V pole changing bar 1.5/2 kW
Infinitely variable spindle speed...
Column drilling machine make ARBOGA type GM 3512
Machine # 293869 Year of construction 1986
technical data:
drilling capacity 35 mm
spindle admission MK 4
spindle stroke 200 mm
throat 300 mm
12 spindle speeds 61 - 1645 rpm.
column diameter 160 mm
table size 400 x 500 mm
outer dimensions approx. 500 x 700 x 2100 mm
drive power 1,9 / 1,6 kW
Brvz2leoyk
weight approx. 410 kg
with
- height adjustable table
- drill chuck with insertion spigot
- vice
used, in good condition
Drilling capacity/ nominal: 25/ 30mm, power: 0.8/ 1.5kW.
Bttlnah8vb
The column drilling machine WMW HECKERT SABO STANDARD BS 63 was built in the 1980s in Germany.
Technical data :
- table working surface: 500 x 630 mm
- vertical table travel: 270 mm
- max. Drilling diameter in steel: 63 mm
- max. Drilling diameter in cast iron: 80 mm
Ork22
- distance of the spindle axis from the stand guides: 280 mm
- distance of the spindle from the table surface: 0-710 mm
- vertical table travel: 200 mm
- vertical travel of the spindle: 280 mm
- Morsea spindle taper: 5
- numb...
Column drilling machine ARBOGA type GM 3508
no. 194229 year of construction approx. 1980
drilling capacity 35 mm in steel
40 mm in cast iron
Spindle mount MK 4
Projection 300 mm
Pinol stroke 150 mm
Table size 500 x 400 mm
distance table - spindle nose min. 300 mm - max. 830 mm
Distance foot mounting surface - spindle nose 1230 mm
Spindle speed 60 - 1125 rpm 8 steps
Feed speed 0.10 - 0.40 mm/rev
Column diameter 150 mm
Motor power 2.2 and 2.5 kW pole-changing
Bil9ozhdvu
Power supply 380 Volt, ...
Drilling capacity in steel 40 mm
projection 360 mm
Delivery time approx. 6-8 weeks from order placement
drilling capacity: 40 mm
Throat: 360 mm
MK: 4 MK
Thread cutting capacity: M 32
Speeds: 38 - 1,270 rpm (9)
feeds: 0,10 - 0,40 mm/rev (4)
S3x9xp
motor: 1,5 kW
length: 550 mm
width: 950 mm
height: 2.363 mm
Weight: 640 kg
ERLO (MADE IN SPAIN)For production useAutomatic feedGearwheel driveFixed machine tableSliding and rotating drill headTiltable rotary tableFront wheel for sensitive fine feedCoola...
Duration / ALB ear power 35/40 mm
Thread cutting capacity Max M30 (Steigungsabhängig)
Hand-reversing switch for forward link.
Undervoltage, thermal overload protection,
Spindle MK 4
Drilling depth 160 mm
Throat depth 300 mm
Column diameter 110 mm
Usable surface [BxL] 420 x 340 mm
Speed display scale
Drilling depth indicator scale
Drilling depth stop with fine adjustment
Table height with rack and pinion
Motor three-phase 400 V pole changing bar 1.5/3 kW
Spindle speeds with continuously variable ...
OFFER 21008
Technical data:
- Drilling capacity in steel ST 60 25 mm
- Drilling spindle adaptor MK 3
- 8 drilling spindle speeds 100 - 1280 rpm
- drilling spindle stroke 130 mm
- throat 220 mm
- column diameter 115 mm
- Drilling unit + table height adjustable
- with hand crank via toothed rack
- table dimension 350 mm
- drive 400 V / 1,4 / 1,8 kW
- space requirement approx. W 800 x H 1850 x D 900 mm
- Weight approx. 250 kg
Igm9ak9p
TECHNICAL SPECIFICATIONS
Drilling capacity steel (S235JR) 30 mm
Vtnkba
Continuous drilling capacity steel (S235JR) 25 mm
Drilling table
Drilling table Work surface Length 355 mm
Drilling table Work surface width 355 mm
Drilling table Type of T-slots diagonal
Drilling table T-slots Size 14 mm
Drilling table T-slots Quantity 2
Drilling table rotation 360
Drilling table inclination 45 °
distance spindle - drilling table max. 784 mm
Speed range
Speed range 120 - 1810 min ̄¹
Number of speed ranges 9
...
- heavy, robust gear drilling machine
- Spindle holder MK 5
- Speed range 32 - 1400 rpm in 12 gear steps
- large, solid support table
- drill head electr. height adjustable
- braked spindle motor
- left / right rotation
- NOT - Off
Bkr8zsxq2t
- Weight approx. 1700 kg
Column drilling machine GILLARDON type GB 50 V
machine No. 0111103 Year of construction 1970
Drilling capacity 50 mm
Spindle holder MK 4 - short quill
Throat 360 mm
Pinol stroke 220 mm
Table size 700 x 590 mm
Column diameter 200 mm
spindle speed 35 - 950 rpm infinitely variable
automatic feed 0.1 - 0.15 - 0.25 - 0.4 mm/rev, 4 steps
Motor power 1.8 and 3.5 kW pole-changing
Power supply 380 Volt, 50 Hz
- Spindle speed over 2 engine speeds and continuously variable variator gearbox
- Thread cutting...
Drilling capacity in steel 50 mm
Bypkx2lq
Throat mm
Delivery time approx. 2 months from order placement
drilling capacity: 50 mm
MK: 4
Thread cutting capacity: M 35
Speeds: 93 - 152 - 204 - 298 - 443 - 695 - 970 - 1,420 rpm
Engine: 3 kW
Length: 480 mm
width: 755 mm
Height: 2.265 mm
Weight: 435 kg
ERLO (MADE IN SPAIN)For the demanding workshop use3 aut. feed displaceable machine table fixed drill head tilting turntable front wheel for sensitive fine feed (symbol photo)
Options:
Work lamp
€ 190,...
Duration / ALB ear power 25/30 mm
Thread cutting capacity Max M20
Spindle MK III
Drilling depth 125 mm
Throat depth 260 mm
Column diameter 110 mm
Usable surface [BxL] 420 x 340 mm
Speed display scale
Drilling depth indicator scale
Drilling depth stop with fine adjustment
Nclxh
Table height with rack and pinion
Motor three-phase 400 V pole changing bar 0.90/1.45 kW
Spindle speed with idle,
continuous 125-4000 1 / min
in 2 levels I: 125-2000 1 / min
II: 250-4000 1 / min
The levels change via belt ...
1.column drilling machines
ALZMETALL AX3S year 1979 with stepless speed control
speed control
motor stage 1 : 250-1125U/min
motor stage 2 : 500-2250U/min
Spindle mounting: MK3
Spindle stroke : 120mm
Table : 400mmX400mm
Btwqj8f
Clamping surface : 300mmX300mm
Motor speed:1425/2875rpm
Motor power : 1/1,3kW
Overall dimensions : approx. LXBXH 400mmX600mmX175mm
AYEL-TECH COLUMN DRILL
Brn7i8uoi0
TYPE Z5050
- MK4
- Electromagnetic automatic feed
- 55/1450 t/m
- Turns right and left
- Drain function
- Unloading 210 mm
- Table 580 x 580 mm
- Table is electrically height adjustable
- Cogwheel driven
- Cooling system
- Protective cover
- Emergency stop
- Lighting system
- 400V
CALL FOR MORE INFO
DUTCHMACH
Metalworking machines
ENSCHEDE
column drilling machine make FLOTT type SB 16
Machine #251600229
Technical data:
drilling capacity 16 mm
Spindle holder MK 2
6 spindle speeds 430 - 4500 rpm.
spindle sleeve stroke 100 mm
Yshlwc
Table size 340 x 280 mm
Projection 240 mm
Drive power 0,75 kW
Column diameter 82 mm
Dimensions approx. 400 x 700 x 1800 mm
Weight approx. 130 kg
with
- Vise
- Emergency stop
- height-adjustable desk
- Drill Chuck
used, in good condition
Column drilling machine CORDIA type S-30
Masch. No. 625530 built in about 1978
Drilling capacity 30 mm
Spindle mount MT 3 - short sleeve
Throat depth 300 mm
Pinolhub 120 mm
Table size 500 x 450 mm
Column diameter 120 mm
Spindle speed 90-1450 RPM 9 levels
Motor power max. 2,2 kW
Power supply 380 v, 50 Hz
-Pole-reversible main engine with 3-speed
-3 reduction stages
-Table height adjustment via hand crank
-Clamping surface on the machine foot
Dimensions L x W x H 700 x 500 x 2100 mm
Weight 350 kg
...
Drilling capacity in steel 30 mm
Throat mm
Delivery time approx. 6-8 weeks from order placement
drilling capacity (steel/cast iron): 30/32 mm
Thread cutting capacity (steel/cast iron): M22 / M24
MK: 3
Speeds: 65 - 3,060 rpm (8)
distance spindle-column: 250 mm
distance spindle-table: 170 - 660 mm
distance spindle-foot: 1.216 mm
Column diameter: 100 mm
table: 300 x 270 mm
foot size: 600 x 380 mm
Stg0do
Engine: 1.1/1.4 HP
length: 380 mm
width: 600 mm
Height: 2,060 mm
Weight: 260 kg
ERLO (MADE IN SP...
Standard equipment:
Drive: V-belt and gear unit combination
Automatically elektomagnetischer spindle feed
machined base plate with T-slots and coolant system integrated
precise mechanical drilling depth setting
automatic tool ejector
Lighting
Motor protection switch with tripping for U
Emergency off pushbutton
Qoq2fkrx
Drill protection with Electr. Hedging
Rotary and swivel table
Thread cutting device
Gear lubrication through automatic oil pump
Push button feed at the handle
Stepless speed adjus...
Description:
Bench and column drilling machine with belt drive
Easy to use security switch to IP 54 with undervoltage release and separate emergency stop pushbutton
400 Volt models with right/left rotation
Drilling depth stop
Precision machined table with diagonal T-slots
Height adjustment of the drilling table with rack and pinion
Drill table ± 45 ° tilt and 360 °
V-belt cover with safety switch
Aluminium die-cast tailstock lever from one piece with Softgrip-handles
Industrial motor
...
AYEL-TECH COLUMN DRILL
TYPE Z5040E
- MK4
- Electromagnetic automatic feed
- 50/1450 t/m
- Clockwise and anti-clockwise rotation
- Drain function
- Unloading 180 mm
- Table 560 x 560 mm
- Spur gear driven
- Cooling system
- Protective cover
Kj0u8fmx
- Emergency stop
- Lighting
- 400V
CALL FOR MORE INFO
DUTCHMACH
Metalworking machines
ENSCHEDE
Motor pole-changing S1
1.0kW/690U/min./400V.
Joropetf
1.6/kW1370U/min./400V.
Speeds - Stepless 225 - 300 rpm.
Drilling capacity St60 - 30mm; Cast iron - 35mm.
Spindle mounting MK3.
Spindle stroke - 140mm.
Column diameter - 115mm.
Throat - 295mm.
Table size 400 x 300 mm.
Weight - 300kg.
Column drilling machine FLOTT type SB 14
Machine. No. 221400241 Year of construction 1976
drilling capacity 14 mm
spindle cone MK 1
throat 200 mm
Bskvynbm
pinol stroke 60 mm
table size 260 x 260 mm
column diameter 70 mm
spindle speed 430 - 4500 rpm. 6 steps
motor power 0,55 kW
Mains connection 380 Volt 50 Hz
- Table height adjustment with clamping ring
- Drilling table rotatable and inclinable
- Quick-action drill chuck RÖHM 1 to 13 mm
Space requirement L x W x H 500 x 350 x 1500 mm
weight 95 kg...
Drilling capacity in steel 35 mm
throat 320 mm
Delivery time prompt, subject to prior sale
special price € 1.920,- (instead of € 2.400,-)
drilling capacity: 35 mm
MK: 4
throat depth: 320 mm
Speeds: 75 - 3.010 rpm (8)
feeds: 8
motor: 1,4 / 2 kW
Btmrj3yzrh
column diameter: 127 mm
quill stroke: 150 mm
table: 500 x 400 mm
max. distance spindle-table: 820 mm
max. distance spindle-base plate: 1.150 mm
length: 550 mm
width: 700 mm
height: 1.700 mm
weight: 290 kg
BOHRPOWERFor maintenance operationGear d...
This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
Photo gallery: the 10 strongest forklift trucks in the world
Sell now on Machineseeker! Over 220,000 inquiries per month
10 valuable tricks for buying used machines online
Photo gallery: The World's 10 biggest excavators
Morlo