Condition: used, Model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine -Milling machine head: pivoting/rotating -Feed: in X and Y no feed because no motors are installed (gears are available, see pictures) -Clamping table: 280 x 1300 mm -Travel: X/Y/Z 450/300/325 mm -Spindle mount: SK40 -quill stroke -quill feed: 0.04-0.16 mm/rev -Speeds from: 60 to 3000 rpm -Dimensions: 1700/1530/H2200 mm -Weight: 1362 kg Gjdjd Dt R Hepfx Ahnsud

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 500 x 200 mm Gedpfxed Dzlqs Ahnsud -4x T slots: 14 mm -Clamping angle: rotatable, swiveling, tiltable -Foot recording: mm -Dimensions: 500/300/H210 mm -Weight: 50.5 kg

Condition: good (used), Universal milling angle head, milling angle head Gujdoc Sc Ikepfx Ahned -Recording: MK4 -Drive mount: MK5 -Angle head: swiveling -Dimensions: 440/300/H310 mm -Weight: 68 kg

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 600 x 320 mm -T groove width: 12mm -T grooves: 5 pieces -Equipment: rotatable, pivotable, tiltable -Foot mount: 325 x 190 mm -Number: 1x tables available -Price per piece Guodpfxedfv Ikj Ahnjd -Dimensions: 800/300/H240 mm -Weight: 70kg

Condition: used, Clamping table, clamping angle, T-slot table, rotary table, milling machine table Godpfx Ahsiinttensud -Clamping angle: for workpiece clamping -Table surface: 800 x 445 mm, height 595 mm -Wall thickness: 30 mm -Grooves: 120 x 21 mm / 80 x 21 mm -Dimensions: 800/445/H595 mm -Weight: 197 kg

Condition: good (used), mechanically switchable clutch, releaseable clutch, power clutch, clutch -Manufacturer: Ortlinghaus, coupling type 100110405 35-12 -Translation: i= 1:1 -Shafts: Ø 24x60 / 24x55 mm Gujdpfxsik Ac Ue Ahnsd -Dimensions: 405/212/H213 mm -Weight: 41 kg

Condition: used, mechanically switchable clutch, releasable clutch, power clutch, clutch -Manufacturer: SEW-Eurodrive, motor/gearbox coupling housing with claw coupling -Use: for gear units SEW-Eurodrive type LP112 or similar -Claw coupling: KTR Rotex 38 -Flange: Ø 250 mm bolt circle Ø 215 x 14 mm -Recess: Ø 180 mm, dimensions/individual components see photos -Dimensions: Ø 250 x 225 mm Godpfxjt Dddfo Ahnoud -Weight: 19 kg

Condition: used, Stop for lathe support, longitudinal stop, lathe, support stop -Clamping tool: stop for lathe support -Bore: Ø 45 mm Godehnfd Sepfx Ahnjud -Dimensions: see photo techn. drawing -Total dimensions: 134/100/H186 mm -Total weight: 9 kg

Condition: used, Universal milling head, milling holder, milling extension, angle milling head Gjdpfx Ahsgxcuqenjud -Manufacturer: WMW HECKERT, milling head from milling machine FSS 315-V -Recording output: SK50 -Recording: Input gear -Milling head: fully pivotable -Stroke: 72 mm -Transport dimensions: 850/650/H520 mm -Weight: 277 kg

Condition: used, clutch, power clutch, gear clutch, transmission clutch -Clutch: Gear clutch with duo sealing rings -Hole shaft: Ø 125 x 125 mm -Flange: bolt circle Ø 265 x 13 mm -Dimensions: Ø 294 x 125 mm -Weight: 26.8 kg Gedpfx Aeuuu H Sshnsud

Condition: used, lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 208 mm Godpouqf Npjfx Ahnjud -Groove width: 40 mm -Dimensions: see photo technical drawing -Dimensions: 230/80/H50 mm -Weight: 4.3 kg

Year of construction: 2008, condition: used, Universal milling head, milling adapter, milling extension, angle milling head, electronic spindle -Spare part comes: from a machining center BJM type ALBZ-145 -Number: 1 piece angle milling head -Recording output: HSK -Milling head: completely rotatable/pivotable -Transport dimensions: 1080/380/H435 mm -Weight: 246 kg Guodpfofbnkbsx Ahnjd

Condition: good (used), turning clamp, 4th axis, rotary table, rotary indexing table, controlled rotary table, dividing head, rotary indexing table, indexing table Gsdpfxevu Tmbj Ahnjud -Manufacturer: Scherer, indexing table from vertical lathe VDZ 80 DS with accessories -Servo motor: Siemens 1FK7042 -Individual components/accessories: see photos -Transport dimensions: 1200/720/H620 mm -Weight: 198 kg

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 535x250 mm, height 410 mm -Wall thickness: 39 mm Guedpfx Asxugykjhnsd -T slots: slot width 18 mm -Dimensions: see photos / technical drawing -Dimensions: 535/250/H410 mm -Weight: 106 kg

Condition: used, Clamping table, clamping angle, T-slot table, rotary table, milling machine table Gsdpfx Asxunupohnjud -Clamping angle: for workpiece clamping -Table surface: 535x250 mm, height 400 mm -Wall thickness: 39 mm -T slots: slot width 18 mm Dimensions: see photos / technical drawing -Dimensions: 535/250/H400 mm -Weight: 100 kg

Condition: used, Clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamping irons, step blocks Gujdpfst Acycjx Ahnod -Manufacturer: Teco, clamping tool clamping bracket, various designs -End terminal: Type 30501 / 30502 / 30503 2 pieces each -Step block: Type 40102 / 40103 / 40104 4 pieces each -Clamping bolt: thread M10, see photos 24 pieces -Price/Delivery: complete -Dimensions: 390/190/H210 mm -Total weight: 6.5 kg

Condition: good (used), Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley Guedpey Aklvofx Ahnsd -Manufacturer: optibelt, timing belt pulley Ø 192 mm -Type: D TB 32-8M-20 -Material: Steel -Number of teeth: 32 teeth / Belt width: 20 mm -Mount: Optibelt 1610-19 taper clamping bushing Ø 19 x 28 mm -Quantity: 3x timing belt pulleys available -Price: per piece -Dimensions: Ø 87 x 28 mm -Weight: 0.8 kg/pc.

Condition: used, Universal milling head, milling adapter, milling extension, angle milling head -Spare part: from a Stankoimport milling machine -Milling head: with quill -Recording: Exit -Recording: Entrance -completely swiveling -impact head Guodpfxeb Iwrie Ahnjd -Equipment -Pitch circle -Dimensions: 1200/800/H300 mm -Weight: 200 kg -Sale only in full

Condition: used, Main spindle with drive motor, universal milling head, milling holder, milling extension, angle milling head, upper support, upper slide, dovetail guide, tool slide, cross table -Manufacturer: Mikron, upper support tool slide from CNC milling machine Mikron UME 600 -Motor: Siemens 380V 3.7/5.25 kW see photo nameplate -Speed: 1500/9000 rpm -Spindle head: SK40 mount Gjdperc Ik Hefx Ahnjud -Dimensions: 1550/560/H735 mm -Weight: 555 kg

Condition: good (used), Clutch gear, gear clutch, slip hub, slip clutch -Manufacturer: Mayr, ROBA slip hub slip clutch -Type: 3/100,210 Gsdpjrub Htefx Ahnsud -Sprocket: Duplex 30 teeth -Dimensions: see photos -Total dimensions: Ø 158 x 70 mm -Weight: 4.4 kg

Condition: good (used), Universal milling head, milling chuck, milling extension, angle milling head Gusdpsb Uhi Sjfx Ahnjd -Spare part from an R

Condition: good (used), Tool trolley Gsdjb A H Tyspfx Ahnoud -SK50 recordings: 10 pieces -Tool trolley: with 5 plastic handles -various cutter heads -various roller milling cutters

Condition: good (used), Two-jaw chuck, 2-jaw chuck, vise, faceplate -Clamping angle: 200 x 200 mm -centrically exciting -Mouth size: Ø 200 mm -Weight: 30 kg Gjdpob A Ig Asfx Ahnoud

Condition: good (used), Universal milling angle head, milling angle head -Recording: SK 50 Guedpfx Ahsb A Nu Ronod -Flange mounting outer diameter: 380 mm -Bolt circle diameter: 320 mm -Drive mounting diameter: 60 mm -swivel -Quick stroke: 65 mm -Dimensions: 450/400/H700 mm -Weight: 170 kg

Condition: good (used), Bezel, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 268 mm -Groove width: mm -Dimensions: see photo technical drawing Guodpfx Aov Sqmtehned -Dimensions: 285/85/H180 mm -Weight: 10.8 kg