Condition: excellent (used), Year of construction: 2009, CMZ TB67 CNC Turning Centre Fanuc 32i-Model A Control Spindle speeds 4000 rpm 12 station turret IEMAC Barfeed Swing over bed 640mm Swing over cross slide 385mm. X/Z travels 200mm (170mm + 30mm) /400mm. Bar capacity 66mm. Tailstock. Serial No.369. Year 2009 For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78848 Machine Serial Number: 380080483WX Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Dkeb Hl D Hjvpg I Uozsl Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2000, YMC SUPERMAX V65A VERTICAL MACHINING CENTRE Djbjwd Ra Ae Hl D Hzskl MAKE SUPERMAX, MADE IN TAIWAN MODEL V65A YEAR 2000 CONTROL FANUC OM (ALPHA DRIVES) TABLE SIZE 840.0 mm x 420.0 mm TRAVERSES (XYZ) 650.0 mm x 410.0 mm x 615.0 mm SPINDLE SPEED 6,000 rpm SPINDLE TAPER BT 40 / CAT 40 SPINDLE NOSE 730.0 mm SPINDLE MOTOR 5.5 / 7.5 kW ATC 16 STATIONS ATC TYPE UMBRELLA PLUS 4TH AXIS UNIT COOLANT SYSTEM SET OF MANUALS

Condition: used, Year of construction: 2012, Used 2011 YCM NDV102A Vertical Machining Centre. Supplied with 12,000 RPM Spindle, 30-station ATC, Swarf Conveyor, Coolant Equipment & Manual Set. SPECIFICATION: TRAVELS: - X Axis: 1,020 mm - Y Axis: 600 mm - Z Axis: 600 mm - Spindle Nose to Table (~ max): 700 mm - Spindle Nose to Table (~ min): 100 mm​ TABLE: - Length: 1,120 mm - Width: 650 mm - T-Slot Width: 18 mm - Number of Std T-Slots: 6 - Max Weight on Table (evenly distributed): 1,000 kg​Machinery Resources International SPINDLE: - Max Rating: 15 kW (20 hp) - Max Speed: 12,000 rpm - Drive System: Direct Speed Belt Drive - Taper: Big Plus BBT40 - Bearing Lubrication: Oil Injection - Spindle Chiller FEEDRATES: - Rapid and Jog (Max.): 24 m/min AXIS MOTORS: - Axis Motor Rating X/Y/Z: 2.29/2.29/3.3 kW​ TOOL CHANGER: - Type: Side mount - Capacity: 30T - Max Tool Diameter: 76 mm - Tool Length Max.: 300 mm - Tool Weight Max.: 6 kg - Tool Change Time: 2.5 sec​ GENERAL: - Air Required: 78.2 psi/min - Power Supply: 400 V / 3 Phase - Coolant Capacity: 360 L - Machine weight 7,000kg Control: Heidenhain TNC i530 Dsb Hewfdzcol D Hzskl Spec: Travel X1020 Y600 Z600 mm | 12000RPM | BBT40 Accessories: Through spindle coolant, hi torque spindle motor, 30 tool side mount ATC

Condition: excellent (used), Year of construction: 2013, operating hours: 1,234 h, Functionality: fully functional, machine/vehicle number: MV 0061-000242, feed length X-axis: 762 mm, feed length Y-axis: 516 mm, feed length Z-axis: 570 mm, travel distance X-axis: 762 mm, travel distance Y-axis: 516 mm, travel distance Z-axis: 570 mm, spindle speed (max.): 10,000 rpm, table width: 570 mm, table length: 860 mm, position of the milling head: Vertical, warranty duration: 3 months, power: 1.42 kW (1.93 HP), Equipment: documentation/manual, rotational speed infinitely variable, Doosan VC510 Twin Pallet Vertical Machining Centre with Doosan Fanuc i Series CNC Control, Table Size 2 x 860 x 570mm, Max Workpiece Height 520mm, Spindle Speed 10,000rpm, BT40 Spindle Taper, 40 Tool ATC, X Axis Travel 762mm, Y Axis Travel 516mm, Z Axis Travel 570mm, Pumps and Equipment WPB 10-1000 Hydrajet High Pressure Coolant System, Kaukan Chiller Unit, LNS Turbo HB Swarf Conveyor. S/No. MV 0061-000242 (2013) Machine Weight 9500kg, Various BT40 Back End Spindle Tools Dkjb Hl Dov Du Avo Hzsl Please note that this machine is not yet in stock. Hours are to be confirmed. Machine comes with various BT40 Tool holders

Condition: excellent (used), Colchester Triumph 2000 x 30” Gap Bed Centre Lathe Height of Centres 190mm Max’ Distance Between Centres 762mm Max’ Swing over Bed 390mm Max’ Swing over Cross Slide 240mm Max’ Swing in Gap 580mm Spindle Bore 54mm Spindle Nose D16 Camlock Spindle Taper in Bush No.4 Morse Spindle Speeds 25 - 2000 rev/min Dsb Hl D Hsvlw H Hezekl Tailstock No.4 Morse 3 Phase Electrics 7.5hp Motor Supplied with: 3 Jaw Chuck Quick Change Tool Post *For Sale with Jet Machinery Ltd* Jet Machinery Stock No: #78765 Machine Serial Number: 6/0047/22041 Cost: £5,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2012, operating hours: 1,234 h, Functionality: fully functional, machine/vehicle number: MV0061-000073, feed length X-axis: 762 mm, feed length Y-axis: 516 mm, feed length Z-axis: 570 mm, travel distance X-axis: 762 mm, travel distance Y-axis: 516 mm, travel distance Z-axis: 570 mm, spindle speed (max.): 10,000 rpm, table width: 570 mm, table length: 860 mm, position of the milling head: Vertical, warranty duration: 3 months, power: 1.42 kW (1.93 HP), Equipment: documentation/manual, rotational speed infinitely variable, Doosan VC510 Twin Pallet Vertical Machining Centre with Doosan Fanuc i Series CNC Control, Table Size 2 x 860 x 570mm, Max Workpiece Height 520mm, Spindle Speed 10,000rpm, BT40 Spindle Taper, 40 Tool ATC, X Axis Travel 762mm, Y Axis Travel 516mm, Z Axis Travel 570mm, Pumps and Equipment WPB 10-1000 Hydrajet High Pressure Coolant System, Kaukan Chiller Unit, LNS Turbo HB Swarf Conveyor. S/No. MV 0061-000242 (2013) Machine Weight 9500kg, Various BT40 Back End Spindle Tools Machine comes with various BT40 Tool holders Dob Hsv Duy Ijl D Hzekl

Condition: excellent (used), Year of construction: 2005, Doosan S400 CNC 2 Axis Turning Centre Fanuc Oi-TC Control Manufactured 2005 Tool Setting Arm 12” 3 Jaw Chuck 12 Station Turret Tail Stock Swarf Conveyor (Not photographed) Tooling as photographed. Dob Hl Dev Epzpo Hzskl Bar Capacity 76.5mm Max Cutting Dia. 400mm Max Cutting Length 750mm Spindle Motor Power 22KW Spindle Speeds 3500rpm For sale with Jet Machinery Ltd Jet Machinery Stock No: #78861 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Broadbent Heavy Duty Lathe 1041mm x 10,000mm Year approx. 1973. Swing over bed 1041mm (41”) Dob Hsv I T Ewol D Hzokl Swing bin gap1575mm (62”) Distance between centres 9300mm (30’ 6”) Spindle bore 115m (4 ½”) Spindle speeds (18) 3.3 – 360 rpm Spindle motor 30 HP or 40 HP (To be confirmed) Tailstock 6 MT Imperial Metric screw-cutting with change gears. 36” Faceplate with 4 adjustable jaws, 54” Faceplate, Taper turning attachment, Power feed to top slide, 2 x 18” 3 point steadies, 24”/28” Steady.

Condition: ready for operation (used), Year of construction: 1995, Mostana 1M63 x 3000mm Gap Bed Centre Lathe Max’ distance between centres 3000mm Max’ swing Over Bed 700mm Max; swing over cross silde 350mm Max’ swing in gap 900mm Dob Hl D Howf Sfvszekl Spindle Bore 105mm Spindle Speeds 10-1250 rpm Spindle Motor 15kW Cross slide travel 400mm Year 1995 Machine complete with: Sony LH70 2 axis Digital Readout Interlocking chuck guard Taper turning through compound slide 500mm 4 jaw chuck 390mm 3 Point fixed steady Rapid power traverse 4 way tool post Change gears coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78739 Machine Serial Number: 1688 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), EX UNIVERSITY Startrite Type 18-S-5 Vertical Bandsaw 18” Throat Blade Speeds 17 – 980 M/min / 56 – 3200 ft/min Blade Length 114” Tilting Table 415V 3-Phase Motor Weight 400kgs. For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78781 Dkebou Euh So Hl D Hzjl Machine Serial Number: 27183 Cost: £1250.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 1991, Hare 5BS Hydraulic Press Deb Hswfp Sgsl D Hzekl Capacity 7.5T Max Stroke 100mm Bed Area 380 x 200m On Solid well made stand For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78919 Machine Serial Number: 91201811 Year of Manufacture: 1991 415V Electrics Cost: £3,750.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2004, grinding length: 1,000 mm, grinding width: 400 mm, total height: 700 mm, feed length X-axis: 1,140 mm, distance table to spindle center: 700 mm, spindle speed (max.): 1,800 rpm, overall weight: 3,300 kg, Andmar Surface Grinding Machine YSG1640AHD Year of Manufacture 2004 Max’ Grinding length x width 1110 x 400mm Max’ Distance from table to spindle c/l 700mm Max’ Longitudinal Travel 1140mm Max’ Cross Travel 460mm Mag Chuck 1000 x 400mm Auto Cross & Auto Down Feeds Spindle Motor 7.5Hp Spindle Speeds to 1800rpm Overall Dims 3450 x 2114 x 2050mm Net weight 3300kgs Coolant Dsb Hl D Hewabf Iezekl 3 Phase 415 electrics For sale with Jet Machinery Ltd Jet Machinery Stock No: #78780 Machine Serial Number: 93FS038 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2001, Feeler FT-30 CNC Turning Centre 12 Station Block Turret Fanuc OTC Control 22kW Spindle Motor 10” Power Chuck Spindle Range 34-3500rpm Tail Stock (controlled by M Function) Interlocking Guards Separate Transformer Electronic Handwheel Swarf Conveyor Turret Tooling as photographed Year of Manufacture 2001 Machine Capacity: Max’ Swing over carriage 450mm Max’ Turning Dia’ 450mm Max’ Turning Length 621mm Max’ Bar Work Dia’ 75mm X Axis Travel 260mm Z Axis Travel 795mm Spindle: Main Spindle Speeds 3500rpm Spindle Nose A2-8 10” Chuck Turret: Number Of Tool Stations 12 25 x 25mm tools Max’ tool 40mm Ø Turret Tooling as photographed Deb Hlevw Ax Ej D Hzokl General Dims: Machine Dims - 2920 x 1633mm Weight 5000kg For sale with Jet Machinery Ltd Jet Machinery Stock No: #78878 Machine Serial Number: TE180 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Mitutoyo PJ300H Profile Projector Model PJ300H 3 x Lens Supplied (10, 20 & 50x) 2 off Mitutoyo Digital Hand Wheels Lots of spare bulbs. For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78785 Machine Serial Number: n/a Cost: £2250.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Dkjb Hevpid Eel D Hzsl Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2020, operating hours: 1,200 h, XYZ 750 LR Vertical Machining Centre (3 Axis) Siemens 828D Control Manufacture & Installed in 2020 Working Table: Working Area 830 x 410mm T Slot Size 3 x 16 x 100mm Maximum Table Load Capacity 500Kgs Machine Stroke: X Axis Travel 750mm Y Axis Travel 440mm Z Axis Travel 500mm Distance from spindle nose to working surface table 100 – 600mm Distance from spindle centre to main column 500mm Spindle: Spindle Taper BT40 Bearing Dia’ Ø60mm Spindle Speeds to 8,000rev/min Feeds: Rapids 20m/min Cutting Feed Rates (XYZ) 1 – 20,000mm/min Linear Rail Slideways Tool Magazine: Capacity 20 Carousel Max’ Tool Weight 7Kgs Dkeb Hlsrvkn Uj D Hzsl Tool Change Time (T-T) 8 Secs Drive Motor: Spindle Drive Motor 10HP Coolant 1/4HP Chip Wash 1/4HP General: Door Opening Width: 880mm Overall Dims: 2100 x 2100 x 2655mm Gross Weight: 3500Kgs Supplied with: Siemens 828D Control Renishaw Tool Setting & Probing Remote Electronic Control Handwheel Optimised Digital Servos Rigid Tapping Flood Coolant Worklight 20 Station Carousel Easy Clean Swarf Tray Steel Concertina Guards on all Axis Power Coating Guarding USB Port Compact Flash Drive Card Slot Jet Machinery Stock No: #78752 Machine Serial Number: STP20168 Cost: £34,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2006, Mori Seiki NL3000Y/1250 Turning Centre (2006) Mori Seiki MSX-850II Control Manufactured & Installed in 2006 Various Live Tool Holders & Various Static Tooling Supplied Tool Setting Arm C & Y Axis Tailstock 12” Chuck Swarf Conveyor Machine Capacity: Max’ Swing over Bed 995mm Max’ Swing over Cross Slide 825mm Max’ Recommended Turning Dia’ 420mm Standard Turning Dia’ 310mm Max’ Turning Length 1260mm Max’ Bar Work Dia’ 90mm X Axis Travel 210 + 70mm Y Axis Travel 120mm (+- 60) Z Axis Travel 1370 C Axis 0.001° Spindle: Main Spindle Speeds 3000rpm 2 Spinde Ranges Spindle Nose A2-8 12” Chuck Turret: Number Of Tool Stations 10 Height of Angle Tool Shank Section 25mm Dia’ of Borig Bar 50mm Live Tooling Speeds 6000rpm General Dims: Dsb Hl D Hjukgacozokl Machine Dims - 4522 x 2291mm Weight 8100Kgs For sale with Jet Machinery Ltd Jet Machinery Stock No: #78830 Machine Serial Number: NL301FJ0675 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2003, Mazak Nexus VCN 410A Vertical Machining Centre Mazatrol NEXUS 640m Control Manufactured & Installed in 2003 Kitigawa 4th Axis Lang mounted 3 Jaw Chuck 30 Station Too Carousel 12k Spindle Machine Capacity: Table Size: 900 x 410mm X Axis Travel 560mm Y Axis Travel 410mm Z Axis Travel 510mm Rapid Traverses 36000m/min Spindle: Spindle Speeds – 12,000rpm Tool Shank CAT-40 Tool Storage Capacity 30 Tools Spindle Power 18.5kW For sale with Jet Machinery Ltd Jet Machinery Stock No: #78832 Machine Serial Number: 164742 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use. Dksb Hsukgdbel D Hzel

Condition: good (used), Colchester Mastiff Gap Bed Centre Lathe Maximum Distance Between Centres 1000mm Maximum Swing Over Bed 535mm Maximum Swing over Gap 810mm Spindle Bore 90mm Spindle Speeds 20-1400 rev/min Motor 12.5 HP Supplied with: Dual Dials Quick Change Tool Post Djbjvllk Ts Hl D Hzskl 3 Jaw Chuck Coolant New Digital Readout For sale with Jet Machinery Ltd Jet Machinery Stock No: #78850 Machine Serial Number: 8/0211/06270 Cost: £13,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.  

Condition: excellent (used), Smart & Brown 1024 Mk.2 VSL Vari Speed Drive Centre Lathe 5.5” Centre Height Dsb Hl D Hewfq Ehjzskl 24” Between Centres 9 1/2” Swing Spindle Speeds 30 - 2500rpm D1-4 Spindle Nose Supplied with tooling as photographed. 415V Electrics FOR SALE WITH JET MACHINERY LTD Jet Machinery Stock No: #78920 Machine Serial Number: N./A Cost: £5,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2012, travel distance X-axis: 1,000 mm, travel distance Y-axis: 596 mm, travel distance Z-axis: 520 mm, XYZ SMX 4000 3-Axis CNC Bed Milling Machine ProtoTRAK SMX Control Year of Manufacture 2012 Dkeb Hl Dewalfrj Hzjl Sold with Tooling as Photographed Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Table: 1474 x 355mm Max load 850kgs Travel: X – 1,060mm Y – 596mm Z – 520mm Dims without travels: W - 2370mm D – 2485mm H – 2660mm Weight - 3100Kgs For sale with *Jet Machinery Ltd* Stock No: 78920 Serial No: 11568 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2006, XYZ 1340 Trainer Lathe Max’ Distance Between Centres 1000mm Max Swing over Bed 330mm Max’ Swing over Gap 495mm Spindle Bore 35mm Spindle Speeds 53 – 2000 rev/min Dsb Hjwfn H Nsl D Hzjkl Spindle Motor 3hp Quick Change Tool Post Tailstock MT3 Tailstock Dia’ 40mm Tailstock Travel 110mm Manufactured | 2006 415V Electrics Supplied with: 3 Point Fixed Steady 2 Point Travelling Steady Jaws Tool Holders as Pictured Change Gears Lifting Bracket FOR SALE WITH JET MACHINERY LTD Jet Machinery Stock No: #78921 Machine Serial Number: 9963 Cost: £2,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Norton 50T Downstroke Plate Frame Hydraulic Press • Press height 2750mm including pipework • Press Weight 1100Kgs • Max Press Load 50T • Max Hydraulic Pressure 428Kgs/cm2 • Ram Stroke Adjustable 610mm Max • Bed Height 762mm to Face of Bolster • Bed Area 610mm l-r x 406mm b-f • Oil Tank Capacity 70 lt. Dob Hl Deulizls Hzskl • Electric Motor Size 7.5Hp • Electrical Supply 415v 3 Phase • Overall Size Of press Unit 740 x 550 x 2750mm (WDH) • Ram End is 105mm Dia Plain End. Supplied with: • Machine Handbooks • *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #78800 Machine Serial Number: Not Visible Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2012, Mori Seiki NLX2500MC Turning Centre (2012) Mori Seiki M370BM Control Manufactured & Installed in 2012 Various Live Tool Holders & Various Static Tooling Supplied Tool Setting Arm Tailstock 10” Chuck Swarf Conveyor Mist Extraction Machine Capacity: Max’ Swing over Bed 544mm Max’ Swing over Cross Slide 541mm Max’ Recommended Turning Dia’ 366mm Standard Turning Dia’ 271mm Max’ Turning Length 705mm Max’ Bar Work Dia’ 80mm Dkjb Hleukgbts D Hzjl X Axis Travel 260mm Z Axis Travel 795mm Spindle: Main Spindle Speeds 4000rpm 2 Spinde Ranges Spindle Nose A2-8 10” Chuck Turret: Number Of Tool Stations 10 Height of Angle Tool Shank Section 25mm Dia’ of Borig Bar 50mm Live Tooling Speeds 6000rpm General Dims: Machine Dims - 3380 x 1980mm Weight 5500kg For sale with Jet Machinery Ltd Jet Machinery Stock No: #78831 Machine Serial Number: NL253120316 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 1996, Harrison M550 Gap Bed Centre Lathe Max’ Distance Between Centres 3000mm Max Swing over Bed 550mm Max’ Swing over Gap 830mm Spindle Bore 104mm Spindle Speeds 18– 1400 rev/min Spindle Motor 11Kw. Tailstock MT5 Manufactured 1996 Supplied with: 3 Jaw Chuck 4 Jaw Chuck 3 Point Fixed Steady Quick Change Tool Post For sale with Jet Machinery Ltd Dkjb Hlsuy T Dbo D Hzel Jet Machinery Stock No: #78822 Machine Serial Number: 5M0048 Cost: £12,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.  

Condition: excellent (used), Year of construction: 2006, XYZ SMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Year of Manufacture 2006 Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Dkob Hlsvw S T Eo D Hzsl Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar For sale with Jet Machinery Ltd Jet Machinery Stock No: #78877 Machine Serial Number: 10625 Cost: £15,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.