COMBINED DRAWING MACHINE SCHUMAG KZRP-0B
Manufacturer SCHUMAG Ag, AACHEN, GERMANY
Year of manufacture 1988
Model KZRP-0B
Range
Rounds: Ø 2-10 mm.
Squares: 2 – 7 mm.
Hexagons: 2-8 mm.
Tubes: Ø 2-16 mm.
Drawing force 2 Tons.
Bars length 2-5 mt.
Speed Up to 100 mt/min.
Drawing bench motor 148 kW d.c.
Tension 380 v. 50 Hz.
COMPOSITION OF THE LINE
Decoiler
H + V pre-straightener
Rnriz8az
Two carriages drawing bench with motorized die
Special nozzle straightener-original Schumag made
H + V straighten...
Ref. -No.: 10063
Brand: FROEMAG
Type of control: Konventionell
Control: N/A
Storage location: Mülheim an der Ruhr
Bt7mf0kofm
Country of origin: Deutschland
Further information:
Equipment:
two cupboards
Koch KGT 1250/3
control Siemens S
Ø 2,7 - 7,5 mm
Ø 1,0 - 5,0 mm
drawing speed v = max. 15 m/sec.
8 (Wasserkühlung)
Bsrf8wgiab
output 8 x 55 kw
voltage 400 V / 50 hz
weight of the machine ca. 28 t
Working width 300 mm
Bnkrvplhd2
Working height 230 mm
Motor output 4 kW
Length of the planing table 1.500 mm
Number of knives 3 St.
Feed speed 7 m/min.
Dust suction hood 2 x 120 mm
Dimensions (L/W/H) 1.725 x 1.350 x 488 mm
machine weight ab. 270 kg
Code: 0382
Brand: PAOLONI
Model: FS 515 - CE Standard
2-works combined machine (surface planer/ thicknessing planer ) - CE standard
Technical data:
Gozvk3opg
Surface planer:
Working width mm 515
Table length mm 2240
Motor power Kw 4
Tilting fence
Thicknessing planer
Working height mm 230
Feeding speed mt /min: 4/6,5/10/16
Weight kg 700
planing width 630 mm
7,5 kW
Btgoprt9xq
planing height 245 mm
Technical characteristics
Superior planerInferior planing machineRouterMortising machine Working width: 510 mm Shaft diameter: 50 mm Power and Motors
Overall dimensions
Ogxedpzz
Working width:520 mm
Working height:250 mm
Bfuwemaw3z
Motor output:7,0 kW
Breitenbach NN
control Siemens S7 -überholt 2003
Ø 2,7 - 8 mm
Ø 1,0 - 5,0 mm
11 (Wasserkühlung)
voltage 400 V / 50 Hz
weight of the machine ca. 40 t
Qpiyanyh
Working width 520 mm
Working height 240 mm
Motor output 7,0 kW
Length of the planing table 2250 mm
Number of knives 4 St.
Feed speed 5/8/12/18 m/min.
Dust suction hood 120 mm
Bqguumg9uh
Dimensions (L/W/H) 2250 x 1370 x 900 mm
machine weight ab. 695 kg
Used machine in good condition. Available for immediate delivery.
- Working area laser (X x Y): 3.085 x 1.280 mm
Dxxuwu
- Working area punching (X x Y): 3.085 x 1.370 mm
- Working area punching / laser (X x Y): 2.585 x 1.280 mm
- Simultaneous positioning speed: 108 X+Y m/min
- Max. workpiece weight: 200 kg
- Punching force: 220 kN
- Punch diameter max: 76,2 mm
- Control: SIEMENS SINUMERIK 840 D
- Material thickness (punching) max: 8 mm
- Axis speed [X axis] max: 90 m/min
- Laser Output: 2,...
see technical data from pdf document
Xgwm8hwk0
diameter range 8 mm
drawing speed 19 m/min
Bexohnrbin
mild steel 9,5 mm
high tensile 8 mm
capstan diameter 600 mm
drawing power 1400 kg
Working width:520 mm
Working height:240 mm
O32j2
Planer and thicknesser with belt drive, make Kölle,
planing width 63 cm for sale to self-collectors.
The disassembly for the removal must be done by the collector himself on site and with suitable means of transport such as lift trucks.
The machine weighs approx. 1000 kg.
Btsipnovh2
Working width 410 mm
Working height 230 mm
Eqm00ye
Motor output 5,0 kW
Length of the planing table 1800 mm
Number of knives 3 St.
Feed speed 7 m/min.
Dust suction hood 120 mm
Dimensions (L/W/H) 2015 x 990 x 900 mm
machine weight ab. 330 kg
Combined copying milling machine - lathe MICHäL KÄMPF combined copying milling machine lathe
Year - Serial-No. -
-We would be very pleased with your visit - more machines on Stock-
-Available Immediately-
Bi0frzzlbk
-Can be inspect-
-On
Combined heavy drilling and milling machine make KNUTH type VBF 40
machine # 108898, year of construction 1996
technical data:
Drilling capacity in steel 38 mm
tapping 25 mm
end milling up to 25 mm
cutter heads up to 75 mm
spindle mounting MK 4
throat 300 mm
16 spindle speeds 120 - 1600 rpm.
quill stroke 120 mm
3 automatic feeds 0,15 / 0,23 / 0,3 mm/rev.
table size 850 x 250 mm
max. distance spindle/table 450 mm
X x Y x Z 470 x 270 x 460 mm
Cikaugte
drive power 2,2 kW
weight approx. 750 kg
outer...
diameter range 8 mm
drawing speed 22 m/min
mild steel 9,5 mm
high tensile 8 mm
Bexohxcg3o
capstan diameter 600 mm
Working width:410 mm
Working height:240 mm
Oyaqd
Motor output:5 kW
Combined machine saw spindle moulder - type TZ 2.5
J7imxxi
- ref.: e/bcfa/dc
- axis diam. 50 mm
- 45° tiltable
- main saw max. diam. 310 mm
- scoring blade diam. 125 mm
- opening lateral guide 1270 mm
Technical characteristics
mortiser 1 to 16 mm - drill bit
B7zh9sjk
very nice machine
accessories and tools Working width: 500 mm Inferior planer table length: 2000 mm Shaft diameter: 50 mm Power and Motors
Overall dimensions
Catalog No. : 5249
Type: COMBI-CUT
Producer: Boschert
Made in: 2006
Characteristic:
Total hours: 30 000 h
Maximum punching force: 280 kN
Table length (X): 2500 mm
Table width (Y): 1250 mm
Maximum travel length X-axis: 2500 mm
Maximum travel length Y-axis: 1250 mm
Maximum table load (evenly distributed): 200 kg
Maximum feed rate in X-axis: 60 m/min
Maximum feed rate in Y-axis: 60 m/min
Max. Sheet thickness: 12 mm
Plasma power: 160 A
Plasma source: Kjellberg HiFocus
Brg0pzmid2
Machine...
In good technical condition, fully functional.
Year of production 2001.
Shot length: 8000 mm.
Cisrwf2
Table width: 2500 mm.
X-axis travel 4250 mm.
Power 4kW.
diameter range 16,5 mm
mild steel 600 N/mm
capstan diameter 750 mm
Bh3kwcpw7k
drawing speed 20 m/min
Max. speed: 360m/min, power: 5.6kW.
Cis2wp2
Code: 0347
Brand: SCM
Model: 2041/FS
3-Works Combined machine Surface planer /Thicknesser planer /Mortiser
Technical data:
Working width mm 410
Bsq37aplrv
Tables length mm 2000
Fence tilting up to 45 degrees
N° 3 cutterknives
Thicknessing planer: thickness capacity max mm 240 / min mm 3 - feed speed mt/min 6/10
Motor power Hp 4
Mortiser: spindle 0-16 mm - table size mm 540 x 330 - longitudinal stroke mm 200 - transversal stroke mm 120 - vertical stroke mm 125
Overall dimensions with mortise...
combined DALEX spot and projection welding machine
Type PMS 10-4
projection: 350 mm
Cjqykakg
Version B/EH
Rated power at 50 % ED: 80 kVA
Sec. short-circuit current: 51.7 kA
Sec. open-circuit voltage: 7 V
Electrode force: 115-690 daN
with solid press table, bottom
top and bottom flange electrode holder for spot welding
add-on switch cabinet according to VDE 0100
Main switch
Synchronous welding control MPS 100
Start via foot switch
5- OPERATION MACHINES
Vsmxca
sliding table 2200 mm
3 motors
tilting saw 0°-45°
including tools and hammer stubai Austria
diameter range 6,4 mm
drawing speed 15 m/min
mild steel 6,4 mm
high tensile 4,7 mm
Dt7a3gp7
capstan diameter 500 mm
output 845 kg
Inlet/ outlet wire diameter: 3.1/ 1.72mm, inlet/ outlet wire strength: 1200/ 1800N/mm, drawing speed: 8.5m/s, number of blocks: 5, block daimeter: 350mm, with Winder BONGARD, year of construction: 1988.
Bsqzrxicgn
Condition of the item: Used
Bipa Code: 920621
Vt0epm
Manufacturer: SCM
Model: Mini 30
Condition of the machine: Used
Available 20 pieces of this model from 2006-2010 year (mostly 2009).
2sxapq
Ø inlet wire max: 1.4 mm
Ø inlet wire min: 0.6 mm
finished wire Ø max: 0.25 mm
finished wire Ø min: 0.08 mm
cross-section reduction: 24 x 13% / 1 x 9.7%
inlet tensile strength: 1400 N / mm²
ready tensile strength: max. 3900 N / mm²
number of cones: 4
cones made of: tungsten carbide
cones Ø: 57-230 mm
finishing capstan Ø: 135 mm
matrix Ø: 28 mm
speed: 7,5 - 20 m / s
maximum speed: 20 m / s
engine type: AC motor
engine p...
RE20 - flexible, compact deep drawing machine
8ueq0ukj3
Repak RE20 / 6
stainless steel construction
Year of construction: 2006
Serial number: 2065038
With 2-fold format: 190 x 150 mm
Trigger length: 150 mm
Cutting length outside: 380 mm
Subfoil width: 420 - 421 mm
Top sheet width: 415 - 420 mm
Sealing edge width: in the direction of travel: 7.5 mm, transversely: 9 mm
Optional vacuum pump - on request
Optional labelling machine - on request
Capacity: up to 12 cycles / minute
Foil width: 320-420-...
Groove width: up to 50 mm
Stroke length: up to 425 mm
The machine was mechanically + electrically overhauled by us.
The machine is newly painted on the outside (color RAL 7015 slate gray).
The control was replaced by a B&R with Beyer software.
Bnkjsgmiqv
Geometry was checked and readjusted, guide rails and the head plate were ground.
Inspection of the electric motors carried out.
Overhaul of the coolant pump carried out.
Rework of the tool guide seat carried out.
The machine has an automatic cyc...
diameter range 11 mm
drawing speed 30 m/min
mild steel 11 mm
Ljj7zwal
high tensile 9,5 mm
capstan diameter 700 mm
output 3 to
Inlet/ outlet wire diameter: 3.1/ 1.72mm, inlet/ outlet wire strength: 1200/ 1800N/mm, drawing speed: 8.5m/s, number of blocks: 5, block daimeter: 350mm, with Winder BONGARD, year of construction: 1989.
Bsqzst2tcq
Hydraulic double-acting pipe drawing Tong and reducing machine Fabr. EIGENBAU
For the connection of outer and inner tube
Consisting of:
1.) vertical hydraulic double-acting press
Table dimensions 565 x 450 mm
Height 800 mm
Distance between the stands 700 mm
lateral ones. Passage 285 x 200 mm
Kolbendrm. 90 mm
7hezd0m87
Outer dimensions 1400 x 650 x 2100 mm
with separately standing hydraulic
Hydraulic double action 2) horizontal press
Performance 450 bar
Height 800 mm
Zylinderdrm. 100 m...
combined 5-operation machine
sliding table 2000 mm
working table surface planer 1500 x 320 mm
cutter head D 100 mm
Pt087m
Velholdt Komb.Stolemaskine
Bg2xeiy0tx
Med Afkorter-Fræs-Bor-Dyvelislåning
Technical data:
- Bending operation and rolling operation by hand,
Btclb2c78
- max. working width 1020 mm
- max. material thickness St 40 1,25 mm
- bending angle adjustment via end stop 10 - 180 °
- max. stroke upper beam approx. 85 mm
- max. adjustability bending beam 20 mm
- shaft diameter 55 mm
- upper shaft swivels out
- rear shaft parallel + inclined adjustable
- space requirement approx. W 1500 x H 1400 x D 750 mm
- weight approx. 400 kg
diameter range 2 -6 mm
drawing speed 15 m/min
mild steel 8 mm
Sugcak
high-tensile 6 mm
capstan diameter 500 mm
Inlet/ outlet wire diameter: 3.1/ 1.72mm, inlet/ outlet wire strength: 1200/ 1800N/mm, drawing speed: 8.5m/s, number of blocks: 5, block daimeter: 350mm, with Winder BONGARD, year of construction: 1995.
Cuqgi8t
Full combined machine
Model:Socomec
Type:Kombi 300
All you need for a well functioning work shop.
Saw/Router/Surface planer/Thicknesser/Drill(mortiser)
Priice: 59500 SEK
Technical data:
Planer:
- Useful working width mm 300
- Spindle ø /knives nr. mm 70 – nr. 3
- Knives dimension HSS standard mm 300 x 20 x 3
- Max. stock removal mm 4
- Surface tables length mm 1500
- Thicknessing table dimension mm 300 x 660
- Feed speed m/1’ 7
- Spindle rotation speed rpm 5700
- Min./max. thicknessing height...
YOU CAN SEE THE TECHNICAL DATA FROM THE PDF DOCUMENT
BASIC CE VERSION
Xgwmuwqwz
overall dimensions 2200x1000x1300 mm;
internal lenght 1900 mm;
2 roller system 1700 mm;
heating 12 kW;
Ciatzkipa
motor 2,2 kW;
weight 570 kg.
WET wire drawing machine
Brand - GCR Engineering ITALY
Year - 1990.
INPUT diameter - 0,80 - 1,70 mm (135 kg/mm2)
OUTPUT diameter - 0,15 - 0,40 mm ( 290 kg/mm2)
Number of dies - 20 + 1
Individual reduction - 14,50 %
Wire speed OUTPUT - 18m/sec
Engine type - magnetic MM 132 S
Power (kW) - 36,1 kW
Lubricant tank - 600 Liters
Lubricant temperature - 20 - 22 C
Supply voltage - 380 V ; 50 Hz
Inslaled power - 40 kVA
Machine weight - 2.800 kg
Bjtyamm2pt
Machine dimensions - 2.000 x 1.700 x 2000...
• Suitable to draw: Low carbon steel wire
Bgijcbsua
• Wire direction: From left to right or right to left (*Depends of customer request)
• Drawing range: Inlet diameter: 2.5 mm
Outlet diameter: 1.0 mm
• Speed: Designed speed: 20 m/sec
• Motor power: 22 kW (Siemens motor)
• Control system: Siemens PLC and display
• Drawing capstan: Are made of steel coated with a layer of tungsten carbide.
Inlet/ outlet wire diameter: 5.5-11/ 4-11mm, inlet/ outlet wire strength: 450/ 850N/mm, drawing speed: 1.6-5.62m/s, with winder, pay-off, sling inspection, wire coating and additional accessories.
Bsqzx9qylc