Condition: used, Mecmesin Ultra Test Universal Testing Machine + AFG 100N Force Gauge (Max Load 1000N) Hfolow Svtiohcdwuop Description: For sale is a Mecmesin Ultra Test Universal Testing Machine with a maximum test force of 1000 N (≈ 100 kgf). The scope of delivery includes a Mecmesin AFG 100N (Advanced Force Gauge), which serves as the force measurement module and display unit. The system is suitable for a wide range of tensile and compression tests in the fields of plastics, packaging, food products (e.g. dough), textiles, electronics, and adhesive testing. Technical specifications (Ultra Test): - Maximum test force: 1000 N - Test methods: tensile and compression tests - Motorized test stand, adjustable speed - Typical travel: approx. 500–1000 mm - Positioning accuracy: ±0.1 mm - Control directly via the AFG Technical specifications (AFG 100N): - Measuring range: up to 100 N (≈ 10 kgf) - Resolution: 0.01 N - Accuracy: ± 0.1% of the measured value - Measurement types: tension and compression force - Peak-hold function, live display - Interfaces: RS-232 / USB (depending on model) Condition: used Scope of delivery: (See picture) (Specifications may be subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Condition: good (used), Measuring amplifier, power supply module, measuring amplifier point design -Manufacturer: Keyence, Measuring amplifier point version -Type: SJ-M300 -Discharge rod: Type SJ-M030G Hfolsxv Sf Ushcdwujp -Transport dimensions: 2401/60/H80 mm -Weight: 0.9 kg

Condition: used, Year of construction: 1983, longitudinal travel 1 mm cross travel 1 mm table length 1 mm Helhcdweu Sbc Aeujfp weight of the machine ca. 0,5 t dimensions of the machine ca. 1,5x0,8x1,9 m

Condition: good (used), Year of construction: 1986, functionality: fully functional, Dimensions (LxWxH) approx. 1,700 x 950 x 1,700 mm Hjlhcdwov Um Rtouofp Weight approx. 1,300 kg Machine number 833, Digital display Kelch PICO version A 23, Ground clamping surface 1,800 x 520 mm, Clear width in the passage (portal) 740 x 320 mm Hswvu Noitvr Rou Iok Tool plate D 700 mm with 4 holding stations, 3 built-in tool holders.

Condition: used, Year of construction: 2007, voltage 400 V current capacity 800 VA frequency 50 Hz weight of the machine ca. ca. 355 kg In our opinion, the machine is in good used condition and can be viewed Holhcdjxwdxcjwusfp under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, Year of construction: 2015, x-travel 500 mm y-travel 700 mm z-travel 400 mm Hslhexwp Hrscdwuefp solution in X-, Y- und Z-axis 0,0001 mm weight of the machine ca. 625 kg dimensions of the machine ca. 1,1 x 1,2 x 2,2 m table load 180 kg workpiece height max. 545 mm table-size 1160 x 730 mm MITUTOYO CRYSTA-APEX S574 Coordinate measuring machine Length measuring deviation: 1.9 + 3 L/1000 Measuring range: X-axis: 505 mm Y-axis: 705 mm Z-axis: 405 mm Resolution: 0.0001 mm Traversing speed: 8 - 300 mm/s Speed: 519 mm/s # MCOSMOS v4.2 R4 software runs on PC with Windows 7 Pro # The probe head is a PH10M with attached modules SP25M + SM25-2 / Can also scan

Condition: excellent (used), Fries Research & Technology Device Designation: FRT MicroProf® MPR 1250 The FRT MicroProf® MPR 1250 is a high-precision surface metrology system from the MicroProf® series by Fries Research & Technology GmbH (FRT). These systems are designed for non-destructive and contactless analysis of surface parameters such as topography, roughness, layer thickness, and more. Features of the FRT MicroProf: Device Details: Model: FRT MicroProf® MPR 1250 Item Number: 200 00 Sensor Type: CWL 300 µm Serial Number: 0904001 Measurement Principle: Chromatic confocal point sensor Light Source: Halogen lamp, white light Vertical resolution: up to 3 nm Measurement accuracy (Z): 100 nm Lateral resolution (XY): 2.5 µm Measurement angle to surface: 90° ±30° Max. sample size: approx. 310 x 310 x 50 mm Technical Data (Excerpt): XY-Stage: Type: Compact XY-cross table Travel (measurement range): 200 x 200 mm Guidance: mechanical cross roller guide Drive: DC motor with ball screw Position feedback system: Heidenhain glass scale with reference mark System resolution: 0.2 µm Repeatability: < ±1 µm Orthogonality XY: < 4 µm / 200 mm Vertical runout (per axis): < 2 µm / 200 mm Helhcdwswh Swdjuefp Z-Axis (motorized): Type: Linear axis Travel: 50 mm (optional 100 mm) Drive: Stepper motor with spindle drive Lateral runout: < 2 µm / 50 mm Manual Coarse Adjustment (optional): Type: Dovetail guide Adjustment range: up to 300 mm sample height Measurement: Minimum point spacing (XY): 0.6 µm Sample size: approx. 310 x 310 x 50 mm Max. sample weight: 5 kg (optional 10 kg) Measuring speed: 1 µm/s up to max. 100 mm/s System: Total weight: approx. 275 kg (measurement setup: 225 kg) Footprint (measurement setup): approx. 0.9 x 0.8 m Dimensions control unit (W x D x H): approx. 0.55 x 0.53 x 0.32 m Power supply (EU/US): 110–240 V, 50–60 Hz, 16 A Power consumption: approx. 300–400 W Operating Conditions: Temperature range: 22 °C ±5 °C Temperature stability: < 0.5 °C Weight approx. 500 kg Condition: The device is in very good technical and cosmetic condition. All axes move precisely and smoothly. Scope of Delivery: MicroProf® MPR200 00 XY measuring system Control unit Connection cables (Subject to technical modifications and errors. All information without obligation!) Inspection and onsite testing available by appointment. For further questions, feel free to contact us by phone.

Condition: used, Year of construction: 2006, functionality: fully functional, EZSET - EZset 400 Offer details Stock no. 1039-9318 Machine type: Tool Presetter Manufacturer: EZSET Model: EZset 400 Year of manufacture: 2006 Control unit: — Warehouse location: D-59302 Oelde Country of origin: Germany Delivery time: by arrangement Freight basis: ex stock Additional information: Tool Presetter EZSET - EZset 400 - incl. ImageController 1 WE OFFER YOU: - Workshop-inspected machines - Free loading onto truck - NO auction fee - Delivery possible (at extra charge) - Unloading and commissioning (at extra charge) Technical details Measuring range X-axis: 400 mm Measuring range Z-axis: 400 mm Hslhcjxt N H Rodwusfp Max. tool weight: 10 kg Tool holder: --> SK 50 Voltage: 85 - 265 V Compressed air: 4 - 6 bar Temperature range: 18 - 22 °C Noise level: < 45 dBA Machine weight approx.: 110 kg Dimensions (L x W x H): 1.42 x 0.45 x 1.76 m Total power requirement: < 100 VA Space required approx.: 2.00 x 2.00 x 2.00 m

Condition: good (used), Year of construction: 2014, Ref. -No.: 10535 Manufacturer: ZOLLER Type: Venturion 810C3 Year of construction: 2014 Storage location: Halberstadt Country of origin: Germany Operating voltage: 100 - 240 V Machine weight: 450 kg Machine width: 2800 mm Machine Height: 2320 mm depth: 1030 mm Hsljxvw Inehcdwujfp Space requirements: 3000 x 2000 x 2600 mm Weight of control unit: 80 kg Tool weight (max.): 50 kg frequency: 50 / 60 Hz Performance: < 1 kVA Compressed air: 6 - 8 bar Noise: < 54 dbA

Condition: good (used), 1 used tool presetting device Brand: Garant Model: VG Basic Item No.: 355010 Technical data Base holder: SK 50 Rapid adjustment: pneumatic Measuring method: image processing, 10-inch touchscreen Measuring control: PC-based measuring electronics Measuring accuracy: 0.01 mm Measuring range X: 400 mm Measuring range Z: 400 mm Base width: 580 mm Overall width: 975 mm Depth: 260 mm Height: 710 mm Weight: 40 kg Spindle load: 50 kg Hslhcdsxu U A Tswuofp Connection: 100-230 V / 50-60 Hz Power supply: mains powered

Condition: used, Year of construction: 2014, x-travel 700 mm z-travel 400 mm y-axis 550 mm max. table load 650 kg In our opinion, the machine is in good used condition and can be inspected under power by appointment. Hjlhjxvdvfecdwusfp Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Year of construction: 2019, condition: like new (used), CONTROLS .. electronic controls ELECTRICAL SPECIFICATIONS .. mains voltage: 240 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 560 mm .. space requirements -front/back-: 660 mm .. total height: 860 mm .. total weight approx.: 100 kg Optical measuring machine for testing diameter, shape, roundness, angle, cylindricity, bending radius, and length. Measuring range: Ø 8 x 100 mm Max. workpiece dimensions: Ø 90 x 260 mm Hfjlhcdwoxwt Adeuop Max. workpiece weight: 3 kg Repeatability (diameter) at 20°C: 0.4 µm Repeatability (length) at 20°C: 3 µm Max. travel speed (vertical): 20 mm/s Max. rotation speed: 180 °/s

Condition: excellent (used), TAMAR Type: FEMET_WI_ID071_TAMAR light microscope PLMIS Light microscope The TAMAR light microscope ID071 is used for the optical inspection of samples with a maximum size of approx. 780x650mm2 (substrate size) in the PLG clean room. Substrate size complete substrate size (780x650mm2) Objective: The objective focuses the light emanating from the observed object into a real image for the viewer. Bright field mode (BF), the light coming from the microscope is directed through the objective to the sample. High resolution, low contrast Dark field mode (DF)  Illumination mode to increase contrast, high contrast for edges and particles. Principle: The center of the incident light beam is covered, only peripheral light is directed through the objective Hfelhcdwsh Nmtgouep and hits the side of the sample. Edges and particles appear bright and the smooth background dark. TAMAR light microscope ID071 X-Y Stage Software Revision 1.0 Condition: used Scope of delivery: (Autosampler as shown) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: ready for operation (used), length 6000 mm width 2500 mm total power requirement / kW Without PC and software Dimensions (L×W): 6000 × 2500 mm, without vacuum plate Manufactured according to DIN 876 / class II Holhcdsud Il Sowusfp

Condition: good (used), Year of construction: 2013, Ref. -No.: 10528 Manufacturer: RöMER Hfelsxvw Ihshcdwujp Type: HEXAGON INFINITE 2.0 Year of construction: 2013 Storage location: Halberstadt Country of origin: Germany Measuring length: 2000 mm

Condition: used, Year of construction: 1975, Breaking device . bar material dia. 10 - 45 mm bar material stranggepreßte NE-Stangen weight of the machine ca. 3 t Bending and breaking device Hfslhcsit Ev Tjdwujp simple and sturdy device to detect internal flaws in extruded non-ferrous metal rods +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: new, functionality: fully functional, The Trimos V1+G stands for Swiss precision at the highest level – combined with simple, intuitive operation. The solid granite base ensures absolute stability, making the device the perfect choice for precise height and comparative measurements in workshop and production environments. The V1+G has been developed for users seeking a robust, durable, and straightforward height measuring instrument. It simplifies daily measurement tasks and, thanks to bidirectional measuring capability, also offers functions for diameter, centerline, and reference measurements – all without complicated menu navigation or extensive training. Hjlhcdoxu T Hwewuefp Model V1+: V1+ – 600 Measuring range (mm): 611 Accuracy (mm): 0.025 Repeatability (mm): 0.005 (Ø: 0.01) Resolution (mm): 0.001 Measuring force (N): 3 Autonomy (h): 2000 Max. traversing speed (mm/s): 1500 Weight (kg): 15

Year of construction: 2019, condition: ready for operation (used), This Nikon V-12BDC was manufactured in 2019. It features a 305 mm screen diameter, a measuring stage of 250 × 150 mm, and integrated XY and angle digital displays for precise measurements. The machine includes a 3-position objective turret for quick magnification changes and high-quality halogen illumination for clear imaging. Ideal for production control and precision mechanics. Contact us for more information about this machine. Application Types Hfolhcoxuw Acedwusp Measuring

Condition: excellent (used), Zwick Type: BT1-FR050TH.A1K 50 kN Universal Testing Machine Zwick/Roell BT1-FR050TH.A1K Material Testing Machine – Precise Strain Gauge Testing Note: PC not included!! Highlights: - Test force: 50 kN (tension/compression) - High-precision TC-MODCSCC module for strain gauge load cells (4- & 6-wire) - Measuring range: 0.2 – 165% of nominal value, data acquisition up to 500 Hz - Maximum resolution: up to 297,000 points (at 50 Hz) - Positioning repeatability: ±10 µm - Crosshead speed: 0.0005 – 600 mm/min - Robust construction - Compact dimensions: 1,814–2,688 mm height, 936 mm width, 722 mm depth - Low noise: 59 dB(A) - Ambient conditions: +10 to +35 °C, humidity 20–90% Special features: - Ideal for research, development, or industrial material testing Helhcdsw S Hvzjwusfp Dimensions & weight: Load frame: - Test force (tension/compression): 50 kN - Load frame height: 1,714 mm - Overall height: 1,814 – 2,688 mm - Load frame width: 760 mm - Overall width: 936 mm - Load frame depth: 477 mm - Overall depth: 722 mm Weight: - With electronic unit: 230 kg - With typical accessories: approx. 300 kg Condition: used Scope of delivery: (see picture) - ZwickRoell BT1-FR050TH.A1K testing machine - Operating manual (Specifications are subject to change and errors excepted!) If you have any questions, we are happy to answer them by phone.

Condition: used, ULM - 01-600 D - Universal length measuring device / calibration tool Hfslhcjxuivbsdwuop

Condition: used, capacity 5 t condition gut amount 1 auf Lager +++++ Hslhcdekyzbhowuofp Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: new, functionality: fully functional, The Trimos V1+G stands for Swiss precision at the highest level—combined with simple, intuitive operation. The solid granite base ensures absolute stability, making the device the perfect choice for precise height and comparative measurements in workshop and production environments. The V1+G was developed for users who require a robust, durable, and straightforward height measuring instrument. It simplifies daily measurement tasks and, thanks to bidirectional measurement capability, also offers functions for diameter, centerline, and reference measurements—without complex menu navigation or lengthy training. Models V1+: V1+ – 300 Measuring range (mm): 306 Helhsxu T E Tscdwuofp Accuracy (mm): 0.015 Repeatability (mm): 0.005 (Ø: 0.01) Resolution (mm): 0.001 Measuring force (N): 3 Autonomy (h): 2000 Max. travel speed (mm/s): 1500 Weight (kg): 13.4

Condition: excellent (used), Zwick Type: BZ2.5/TN1S Zwick table testing machines Tensile strength measuring machine Area of application: Wide range of applications, from plastic and elastomer testing to paper, textile, foam and wire to component testing. Load frame: Max. test force FN in tension/compression direction 2.5 kN Hfslhcofnm Dqedwuep Height (h1) approx. 770 mm Width with electronic unit 320 mm Depth with electronic unit 414 mm Height of the work area h min ... h max: Traverse angle mounted upwards 227 ... 573 mm Traverse angle mounted rotated by 180° 57 ... 403 mm (each without connection bolt) Connection values: Electrical connection 115/230 V 4/2A-1PH/PE/N Power consumption 0.4 kVA Mains frequency 50/60 Hz 2.5 kN Condition: used Scope of delivery: (see image) (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: new, functionality: fully functional, The Trimos V1+ is the enhanced version of the proven V1 and is ideal for users seeking top precision combined with effortless operation. It offers all the benefits of the V1, complemented by bidirectional measurement that enables diameter, centerline, and comparative measurements – a real advantage over conventional entry-level models. Manufactured in Switzerland, the V1+ stands for quality, durability, and outstanding repeatability. It is perfectly suited for workshop, inspection room, and production environments. Thanks to its ergonomic design, stable base, and sensitive guidance, the V1+ can be operated precisely and safely. The constant measuring force ensures consistently reliable results. Models V1+: V1+ – 600 Measuring range (mm): 611 Accuracy (mm): 0.025 Repeatability (mm): 0.005 (Ø: 0.01) Resolution (mm): 0.001 Measuring force (N): 3 Autonomy (h): 2000 Max. travel speed (mm/s): 1500 Holoxu T Emehcdwujfp Weight (kg): 8 (steel base) / 15 (granite base)

Condition: good (used), Zwick Type: BZ1.0 / TH1S Zwick table testing machines Zwick with a maximum force of 1.0 kN. Hfsleddantjhcdwuep The course of the traverse: 1150 mm. Testing speed: 0.1 ... 1800 mm / min Scope of delivery. (See pictures) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.