Condition: ready for operation (used), Year of construction: 2023, operating hours: 362 h, functionality: fully functional, machine/vehicle number: 12430021383, travel distance X-axis: 750 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller model: Siemens 840D sl Operate, spindle speed (max.): 20,000 rpm, Auction of a DMG DMU 75 Monoblock + Pallet Handling PH150! Kedpfx Akjz I Tciopedu Only 362 spindle hours! TECHNICAL DETAILS Travel in X-axis: 750 mm Travel in Y-axis: 650 mm Travel in Z-axis: 560 mm Main drive and spindle Main drive: AC motor, digitally controlled Motor spindle: speedMASTER Warranty period of the motor spindle: 36 months Speed range: max. 20,000 rpm Spindle mount: HSK-A 63 Acceleration time: approx. 2.6 s Deceleration time: approx. 2.6 s Drive power at 40% duty cycle: 35 kW Drive power at 100% duty cycle: 25 kW Spindle torque at 40% duty cycle: 130 Nm Spindle torque at 100% duty cycle: 86 Nm Spindle bearing inner diameter (front): 80 mm Spindle bearing inner diameter (rear): 55 mm Number of T-slots: 4 × 14 H12 T-slot spacing: 63 mm Centering bore: 50 mm Thread: 8 × M12 Tilting axis A Tilting angle towards the working spindle: +120° Tilting angle away from the working spindle: −120° Torque of tilting axis: 3,400 Nm Holding torque of tilting axis: 3,400 Nm Holding torque of tilting axis with hydraulic clamping: 6,200 Nm Rapid traverse of tilting axis: 40 rpm Feed rate of tilting axis: 20 rpm Input and display resolution: 0.001° Bidirectional accuracy of tilting axis A: A ≤ 9 arc seconds Permissible moment of inertia of tilting axis: max. 59 kg·m² Rotary axis C Rotary range of C-axis: 360° Torque of rotary axis: 2,000 Nm Holding torque of rotary axis: 2,000 Nm Feed rate of rotary axis: 7,200°/min Bidirectional accuracy of rotary axis C: A ≤ 7 arc seconds Table load: max. 600 kg Permissible moment of inertia of rotary axis: max. 48 kg·m² Workpiece diameter: max. 840 mm Machinable diameter: 650 mm Workpiece height: 500 mm MACHINE DETAILS Control system: Siemens 840D sl Operate Cooling system: Liquid cooling Lubrication: Oil-air lubrication Operating hours Power-on hours (according to counter): 1,166 h Spindle hours (according to counter): 362 h Further technical data can be found in the attached offers.

Condition: repair required (used), Year of construction: 2013, functionality: unexamined, machine/vehicle number: GM 5251/01-01 NEU 4541/01-08 ALT, travel distance X-axis: 550 mm, travel distance Y-axis: 655 mm, travel distance Z-axis: 685 mm, feed rate X-axis: 90 m/min, feed rate Y-axis: 75 m/min, feed rate Z-axis: 90 m/min, nominal power (apparent): 58 kVA, torque: 197 Nm, total height: 3,100 mm, total length: 4,000 mm, total width: 2,700 mm, table width: 1,300 mm, table length: 800 mm, table load: 1,070 kg, rotational speed (max.): 8,000 rpm, overall weight: 15,000 kg, spindle motor power: 25,000 W, spindle mount: MK 0, number of spindles: 2, number of slots in tool magazine: 72, tool length: 300 mm, tool diameter: 160 mm, tool weight: 8 g, input voltage: 400 V, type of input current: AC, Equipment: rotational speed infinitely variable, GROB G320EA22K – CNC Double-Spindle Horizontal Machining Center, 4 Axes The machine is stored in Hamburg. No CE marking, as it was originally intended for use in China. Kdjdpfx Ajz R Upfskpeu For sale is a GROB G320EA22K CNC horizontal machining center with two spindles and 4-axis machining. The machine is equipped with a Siemens 840D sl control system and is suitable for precise and efficient machining in industrial production. Technical data: Manufacturer: GROB Machine type: G320EA22K Machine type: CNC horizontal machining center Control system: Siemens 840D sl Number of axes: 4 Number of spindles: 2 Spindle distance: 550 mm Spindle manufacturer: Kessler Max. spindle speed: 8,000 rpm Spindle power: 20 kW (S1) / 25 kW (S6) Spindle torque: 159 Nm (S1) / 197 Nm (S6) Tool holder: HSK-A63 Tool magazine: 2 × 49 slots (98 tools) Max. tool diameter: 86 mm / 160 mm with limitations Max. tool length: 300 mm Max. tool weight: 8 kg Tool change time chip-to-chip: 2.7 seconds Travel distances X/Y/Z: 550 × 655 × 685 mm Rapid traverse X/Y/Z: 65 / 55 / 90 m/min NC rotary table: Ø 800 / 1,300 mm Max. workpiece weight on the rotary table: 1,070 kg Rotary table speed: 25 rpm Positioning accuracy of axes: 0.006 mm Repeatability of axes: 0.004 mm High-pressure coolant system: 80 bar Coolant temperature control: available Filter fineness: 30 µm Machine dimensions (L × W × H): approx. 4,000 × 2,700 × 3,100 mm Machine weight: approx. 15,000 kg Installed power: 58 kW Compressed air requirement: 15 Nm³/h at 5 bar Additional equipment: Fully enclosed machine Closed-loop control of the axes Temperature monitoring and water cooling of the spindles Automatic tool changer Tool cleaning system Central lubrication for guides and ball screws Automatic, reversible high-pressure coolant filtration No CE certification, as it was originally intended for use in China.

Condition: good (used), Year of construction: 2001, functionality: fully functional, spindle speed (max.): 18,000 rpm, coolant supply: 40 bar, number of slots in tool magazine: 32, Equipment: chip conveyor, documentation/manual,

Condition: excellent (used), Year of construction: 2011, operating hours: 39,090 h, functionality: fully functional, machine/vehicle number: 14390, travel distance X-axis: 1,350 mm, travel distance Y-axis: 970 mm, travel distance Z-axis: 1,300 mm, total height: 4,150 mm, total length: 8,500 mm, total width: 5,500 mm, overall weight: 32,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 6,000 rpm, operating hours of spindle: 8,407 h, coolant supply: 80 bar, spindle motor power: 30,000 W, spindle nose: HSK-A100, number of slots in tool magazine: 60, Equipment: chip conveyor, Travel distances Travel distance X: 1350 mm Travel distance Y: 970 mm Travel distance Z: 1300 mm with measuring system from Haidenhain Pallet size: 800 x 1000 mm Table load: 2000 kg Horizontal/vertical milling table Working spindle Diameter at the front bearing: 110 mm Drive power: (60% duty cycle) 30 kW Kodpfsz Nc Eisx Akpodu Drive power: (100% duty cycle) 29 kW Torque: (60% duty cycle) 1088 Nm Torque: (100% duty cycle) 985 Nm Spindle speed: 20…6000 rpm Spindle taper: HSK-A100 NC rotary table with 500 rpm Table speed for positioning operation up to 60 rpm Table speed for turning operation up to 500 rpm Operation at 100% duty cycle with speed >200 rpm max. 20 min Workpiece diameter incl. fixture 1400 mm Workpiece height: 1400 mm Workpiece weight incl. fixture up to 60 rpm 2000 kg Workpiece weight incl. fixture above 60 rpm 1200 kg Tangential moment 10000 Nm Tilting moment 20000 Nm Drive power (100% duty cycle) 57 kW Drive torque (100% duty cycle) 2520 Nm Machine is equipped with automatic imbalance detection Tool changer: 60 positions Max. tool diameter: 325 mm Max. tool length: 450 mm Max. tool weight: 35 kg Internal coolant supply through the spindle center up to max. 80 bar Additionally: - Coolant gravity band filter from Knoll - Chip conveyor Knoll - HYFRA industrial cooling system - 1x special pallet for turning with 4 jaw chucks 50-2 D1000mm - 1x exchange pallet with T-slots 800x1000mm - 3x exchange pallet with threaded holes DIN55201 800x1000mm - Pallets without workpiece clamping devices - Electronic handwheel - Optical measuring probe OMP60 from Renishaw Net machine weight with H/V table approx. 32500 kg Space requirement approx. (L x W x H) 8500x5500x4150mm Technical data without guarantee. Errors and prior sale reserved.

Condition: excellent (used), Year of construction: 2019, operating hours: 31,800 h, functionality: fully functional, controller manufacturer: Siemens, controller model: 840d, spindle speed (max.): 20,000 rpm, operating hours of spindle: 13,300 h, coolant supply: 40 bar, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, For sale: a Dmu 50. The following equipment is included: 3D probe Ksdpfxo Aaz Nne Akpsdu IKZ 40 bar 600-liter belt filter system Blum laser 20,000 rpm

Condition: used, Year of construction: 2000, No minimum price – guaranteed sale to the highest bidder! Kdedpfxez S Nize Akpju TECHNICAL DETAILS Travel distances X-axis travel: 1,200 mm Y-axis travel: 620 mm Z-axis travel: 520 mm Control system CNC control: Heidenhain TNC 410 Work table Table size: 1,550 × 600 mm Design: continuous table for longer workpieces Tandem operation: possible with a dividing screen Feed rate and rapid traverse Feed rate range: 1–30,000 mm/min Rapid traverse: 45 m/min Spindle and tool holder Spindle speed: 40–8,000 rpm Tool holder: ISO 40 Tool changer Tool changer: 30 positions Performance data Total power consumption: 20 kVA Machine weight: approx. 9 tons Dimensions Space requirement: approx. 4.2 × 2.3 × 2.7 m EQUIPMENT Continuous work table Dividing screen for tandem operation 3 additional clamping tables Tool changer with 30 positions Heidenhain TNC 410 CNC control

Condition: ready for operation (used), Year of construction: 1998, Available for immediate pickup at our location: Vertical machining center ZPS Depo Type MCTV 1060 NT Kdedpfxe Aa Irvs Akpeu Year of manufacture 1998 Heidenhain iTNC 426 M Table 1270 x 590 mm Travel distances X/Y/Z 1016/610/760 mm SK 50 Spindle speeds up to 8000 rpm Table load max. 900 kg Drive power 11 kW Tool changer, 24 positions Distance spindle – table 80 – 840 mm Weight 6700 kg Price: Euro 4,000.00 plus VAT, pickup at our location.

Condition: excellent (used), Year of construction: 2020, Traverses X Y Z: 500 x 450 x 400mm, Table size 500 x 630mm, C axis 360, Kodjz R Nv Hspfx Akpjdu B Axis -5 / +110°, maximum workpiece diameter 630mm, maximum workpiece height 550mm table load 200kgs, Spindle taper BT40, 19kW Spindle Motor, Spindle Speed 12,000rpm, Heidenhain Control, 30 Station ATC, spindle probe, Swarf conveyor, through spindle coolant

Condition: like new (used), Year of construction: 2016, operating hours: 1,200 h, functionality: fully functional, overall weight: 4,200 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 1,200 h, number of spindles: 1, Equipment: chip conveyor, The machine is rarely used and is in like-new condition, with only 1,200 spindle hours. Kdedjz R Sg Uopfx Akpsu

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: AA100264-11 / AA100264-12, travel distance X-axis: 2,000 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 635 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 920 mm, feed length Z-axis: 635 mm, feed rate X-axis: 90 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 25 kVA, controller manufacturer: Siemens, controller model: 840 D, overall weight: 28,000 kg, spindle speed (min.): 20,000 rpm, spindle speed (max.): 20,000 rpm, spindle motor power: 25 W, number of spindles: 2, number of slots in tool magazine: 31, Equipment: chip conveyor, documentation/manual, BAZ and extrusion profile system for the production of car sill profiles consisting of: *Machining machines: - Anger machine SP2-X2000 (machine number AA100264-11) - Anger machine SP2-X2000 (machine number AA100264-12) - 2x coolant treatment units *Subassembly assembly (robot cell for sills): Kdsdpfeyzh Ulsx Akpou - Robot 1 KUKA KR120 R3200 PA - Gripper for robot 1 - Labeling station - Robot 2 KUKA KR120 R3500 - Gripper for robot 2 - Interface robot/machining center - Cleaning unit for components - Assembly machine, 2 lines - Robots 3 and 4 for handling - Drawer system with component inserts - Screwing station - Adhesive application station - Platform - Robot 5 - Gripper for robot 5 - Pallet placement station - Safety enclosure - Electrical control and integration Further information and videos available upon request.

Condition: excellent (used), Year of construction: 2016, operating hours: 12,158 h, functionality: fully functional, machine/vehicle number: UT 0871, spindle speed (max.): 12,000 rpm, spindle nose: SK 40, number of slots in tool magazine: 32, 5-axis machining center Kdodpfx Akjz N Ipuopeu

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 500 050, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, torque: 82 Nm, controller manufacturer: Grundig / Heidenhain, controller model: MillPlus, workpiece length (max.): 500 mm, workpiece width (max.): 400 mm, workpiece height (max.): 400 mm, workpiece diameter (max.): 50 mm, workpiece weight (max.): 200 kg, total height: 2,200 mm, total length: 2,200 mm, total width: 1,800 mm, table width: 500 mm, table height: 800 mm, table length: 700 mm, table load: 200 kg, rotary table diameter: 500 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 9,000 rpm, overall weight: 3,000 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 9,000 rpm, Deckel Maho DMU 50 T – CNC Universal Milling Machine (Year of manufacture: 1996) For sale is a well-maintained and fully functional CNC universal milling machine, the Deckel Maho DMU 50 T, equipped with the proven MillPlus control system. This machine is ideally suited for toolmaking, the production of single parts and small series, and for training workshops. Kodpsz D Ab Tjfx Akpedu Key features: Control system: MillPlus (Deckel Maho) Travel ranges: X = 500 mm / Y = 400 mm / Z = 400 mm Table: Swiveling rotary table for flexible 5-axis machining Spindle: SK40, up to 9,000 rpm Equipment: Full enclosure with sliding doors and ergonomic control panel Sales and transport conditions (Incoterms): Sales condition: EXW (Ex Works / Ex Location) Dismantling & Loading: Dismantling, removal from the building, loading, and transport must be completely organized and carried out by the buyer (at their own expense and risk). Dismantling can also be carried out for a fee. Various accessories included. The machine can be inspected on-site by appointment.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, DMU90P duoBLOCK Operating hours: 52,700 h Operating hours: 22,700 h Immediately Available! Control: HDH iTNC640 Travel: X-900 mm, Y-1050 mm, Z-850 mm clamping surface: 900 x 700 mm max. table load: 1.800 kg Spindle mount: SK50 Spindle speed: 12,000 rpm tool magazine: 60 seats Internal coolant supply (IKZ) and chip removal package: 40 bar Ksdpe Aa Ayujfx Akpedu Tool measurement: BLUM Laser probe: Heidenhain electric handwheel: Yes

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 860 mm, rapid traverse X-axis: 120 m/min, rapid traverse Y-axis: 120 m/min, rapid traverse Z-axis: 120 m/min, feed length X-axis: 630 mm, feed length Y-axis: 730 mm, feed length Z-axis: 860 mm, feed rate X-axis: 120 m/min, feed rate Y-axis: 120 m/min, feed rate Z-axis: 120 m/min, nominal power (apparent): 70 kVA, torque: 1,400 Nm, controller manufacturer: Siemens, controller model: 840D SL, workpiece height (max.): 640 mm, workpiece diameter (max.): 700 mm, workpiece weight (max.): 290 kg, total height: 3,650 mm, total length: 5,650 mm, total width: 3,560 mm, table width: 400 mm, table length: 400 mm, table load: 290 kg, rotational speed (max.): 80 rpm, overall weight: 25,000 kg, distance between spindles: 720 mm, number of spindles: 2, number of slots in tool magazine: 112, tool length: 550 mm, tool diameter: 75 mm, tool weight: 12,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, For sale is a high-performance, two-spindle CNC machining center, MAG SPECHT 500 DUO LIMO PW, manufactured in 2017, with a pallet changer, two working spindles, and 5-axis machining capabilities. The machine has been used infrequently recently and is currently not in active production. It remains connected to the power grid, so an inspection while powered on is possible by appointment. Manufacturer: MAG / FFG Model: MAG SPECHT 500 DUO LIMO PW Year of manufacture: 2017 Condition: very good (original images dated September 15, 2026) Operating hours: 17,690 h Category ID: 1458 Type ID: 4166 Machine type: Universal machining center Technical data: Year of manufacture: 2017 Machine number: X.0112.6258 Control system: Siemens 840D SL Number of spindles: 2 Machining: 5-axis Design: LIMO PW Pallet changer Tool holder: HSK-A63 Travel in X: 630 mm Travel in Y: 730 mm Travel in Z: 860 mm Axis speed X/Y/Z: up to 120 m/min Ksdpfx Aez Ar E Iekpedu Spindle distance: 720 mm B-/A-axis: up to 80 rpm B-axis division: 360° x 0.001° Pallet size: 400 x 400 mm Table/pallet load: 2 x 290 kg Max. weight moment at 90°: 1,400 Nm Max. workpiece and fixture height with pallet changer: 640 mm Max. clearance circle workpiece/fixture: 2 x 700 mm Tool magazine: 112 tool positions for HSK-A63 Tool diameter with full load: 75 mm Tool diameter with empty spaces: 230 mm Max. tool length: 550 mm Max. tool weight: 12 kg Total weight of tools in the magazine: max. 420 kg Accuracy / Measuring system: Linear measuring system X/Y/Z: 0.0001 mm Positional accuracy: 0.005 mm Positional repeatability: 0.004 mm Machine dimensions: Width: approx. 3,560 mm Length: approx. 5,650 mm Height: approx. 3,650 mm Machine weight: approx. 22,000–25,000 kg Electrical rated power according to nameplate: 70 kVA Operating voltage: 400 V / 50 Hz If you have any questions or need more information, please send us a message or call us. Inspection while powered on is possible by appointment in 36199 Rotenburg an der Fulda. Technical documentation is available. Sale from the current location. Dismantling, loading, and transport can be arranged. Subject to prior sale, errors, and changes in technical specifications.

Condition: used, Year of construction: 2005, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 560 mm, workpiece height (max.): 500 mm, workpiece diameter (max.): 730 mm, total height: 3,560 mm, total length: 5,925 mm, total width: 2,695 mm, table width: 500 mm, table length: 500 mm, table load: 500 kg, overall weight: 23,000 kg, spindle speed (min.): 35 rpm, spindle speed (max.): 10,000 rpm, spindle nose: Big plus BT50, number of spindles: 1, number of slots in tool magazine: 120, Equipment: chip conveyor, 5-axis Vertical Machining Center Technical details: CNC Control Mazatrol Fusion 640 M 5x Table size 500x500 mm Table load 500 kg Number of pallets 12 (PMC) Max workpiece Ø 730x500 mm Movement X/Y/Z-axis 730-850-560 mm Kdjdpe Aawnmsfx Akpsu C-axis (table rotation) 360° A-axis (table tilt) +30/-120 Spindle speed 35-10.000 1/Min Spindle Taper Big Plus BT50 Spindle motor 30/22 kW Magazin capacity 120 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), Year of construction: 2016, operating hours: 3,300 h, functionality: fully functional, Manufacturer: DMG MORI Model: ecoMill 70 Year of manufacture: 2016 Control system: Siemens Machining: 3+2 axes Kedpfoz S Uyrex Akpodu Internal cooling (IKZ): available Spindle hours: approx. 3,300 h X-axis: 750 mm Y-axis: 600 mm Z-axis: 520 mm Machining: 3+2-axis positioning B-axis: -10° to +95° C-axis: 360° Rapid traverse X/Y/Z: 24 m/min Max. feed rate: 24,000 mm/min The machine is in very good condition.

Condition: like new (used), Year of construction: 2015, operating hours: 1,000 h, functionality: fully functional, Equipment: documentation/manual, DMG MORI / SAUER GmbH ULTRASONIC 20 Machine Data Control system Heidenhain Axes 5 (X / Y / Z / A / C) Travel ranges X / Y / Z 200 / 200 / 280 mm Spindle speed max. 42,000 rpm Tool holder HSK-E32 Tool magazine 24 Rotary table Ø 190 mm Table load capacity, center 10 kg A-axis -5° / +130° C-axis 360° Rapid traverse 40 m/min Footprint L × W × H 2,020 × 2,196 × 2,385 mm Fuse rating 63 A Feed drive X / Y / Z Synchronous linear motors Feed rate max. 40,000 mm/min Input resolution 0.001 mm C-axis speed max. 150 rpm Table clamping Pneumatic / mechanical Tool length max., from spindle nose 200 mm Tool diameter max., automatic tool changer 40 mm Compressed air supply 6–10 bar Air consumption without tool blowing 12 m³/h Additional consumption with continuous tool blowing 25 m³/h Connection, weight, and dimensions Electrical connection 400 V / 50–60 Hz Machine weight 3,900 kg Tool weight max., automatic tool changer 1 kg Total weight of magazine tools max. 24 kg Compressed air connection min. Ø 12 mm Equipment and scope of supply 15 tool holders and other related accessories as shown in the offer photos are included. Kodpfxoz Tc Tvo Akpjdu Technical data is subject to change without notice. Errors and prior sale are reserved. The specifications and scope of supply agreed upon in the purchase contract shall be the basis.

Condition: good (used), Year of construction: 2007, Universal machining center Machine type: DMG DMU 80 P duoBLOCK Control: Heidenhain iTNC 530 Year: 2007 SPECIFICATIONS 5-axis-simultaneous Travel X-Axis: 800 mm Y-Axis: 800 mm Z-Axis: 800 mm B-Axes C-Axis Panning head Rapid motion: (X/Y/Z): 60 m/min. Spindle speeds: 12.000 rpm Spindle power: 28 / 19 kW Tool: SK 40 Toolchanger Kdjdpfx Akoz Dkunopou Tool capacity: 60 NC rotary table Table size: 900 x 700 mm Max. Table Load: 1.400 kg Equipment Internal cooling: 40/80 bar Chip conveyor Caliper Electronical handwheel Working mode: 4

Condition: used, Year of construction: 2003, operating hours: 34,900 h, functionality: fully functional, machine/vehicle number: 112253, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 410 mm, controller model: Brother CNC-A00, total length: 2,250 mm, overall weight: 2,250 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 26, BROTHER TC-22A – 5 AXIS - Manufacturer: Brother Kodpfx Akoz Akqvepjdu - Model: TC-22A - Serial Number: 112253 - Year: 2003 - Machine Type: CNC Vertical Machining / Tapping Center - CNC Control: Brother CNC-A00 - Number of Axes: 5 - X-Axis Travel: 500 mm - Y-Axis Travel: 400 mm - Z-Axis Travel: 410 mm - Table Size: 650 × 400 mm - Maximum Table Load: 200 kg - Distance Table to Spindle Nose: 200–610 mm - Spindle Taper: HSK-A40 - Spindle: 1 - Spindle Speed: up to 12,000 rpm standard - Tool Magazine: 26 tools - Maximum Tool Diameter: 55 mm - Maximum Tool Diameter with Adjacent Pockets Empty: 125 mm - Maximum Tool Length: 200 mm - Tool Change Time: approx. 0.7 sec - Rapid Traverse X/Y/Z: 56,000 mm/min - Spindle Motor: approx. 7.7 kW / 10 min rating - Power Supply: AC 200 V, 50/60 Hz - Maximum Power Requirement: 25 kVA - Rotary / Swivel Table: Installed - 5-Axis Configuration: 3 linear axes + 2 rotary/swivel axes - Coolant Treatment System: Included - Coolant / Lubricant Pump: Included - Machine Dimensions / Required Floor Space: approx. 1,671 × 2,846 mm - Machine Height: approx. 2,274 mm - Machine Weight: approx. 2,250 kg

Condition: good (used), Year of construction: 1998, CNC milling machine Deckel Maho DMU 80 T Control system: Heidenhain TNC426 Spindle speed: 20-6300 rpm Feed rate x, y, z: 20-10000 mm/min Rapid traverse rate x, y, z: 15000 mm/min Kdjdpfx Akez Suqqepeu Work area: x 800 mm, y 650 mm, z 550 mm Tool holder: SK40 DIN 2079 Clamping bolt DIN 69 872 Tool changer: 25 positions Max. tool diameter 160 mm Max. overhang length from the spindle nose 315 mm Work table: Dimensions 1100 x 600 mm T-slots 9 x M14 Permissible weight 500 kg Transport data: Weight 5800 kg Dimensions (length x width x height) 3.05 x 2.40 x 2.45 m

Condition: used, Year of construction: 2024, controller manufacturer: Siemens, controller model: 840 Dsl - Operate, _____ Description: Year of manuf. : 2024 Kdjdpfx Ako Aa Hmxspju Control : Siemens 840 Dsl - Operate Speed : 15000 rpm Movement X/Y/Z : 800/800/550 mm Tool holder : HSK 63 In General: Year of manufacture:2024 Control system:Siemens 840 Dsl - Operate Travel ranges X/Y/Z:800/800/550 mm Rotational speed:15,000 rpm Tool holder:HSK 63 Spindle: RPM:15,000 Max. power:31 kW Max. torque:194 Nm Tool holder:HSK 63 Fluid supply:Blast air + coolant NC swivel table: A-axis:+/- 130° Drive:Tandem drive C-axis:360° Drive:Direct drive (torque motor) Clamping surface:800 x 630 mm Max. table load:1,400 kg Tool magazin: Magazine I:Standard Number of stations:42 Magazine II:ZM 88 Number of stations:88 Tool changer:Pick-Up Max. tool diameter:80 (125) mm Max. tool length:350 mm Equipment: Position Sensors:Direct scales on all axes (glass scales) Chip Removal:Chip conveyor Coolant Supply:Internal coolant system, 80 bar Workpiece measurement:Touch probe Tool measurement:Laser Kinematics measurement:Automatic, Kinematics Opt Emulsion mist separator:Mechanical Machine accuracy I:Package I Increased accuracy in A and C axes:Yes Turning function:Interpolation turning S840

Condition: used, Year of construction: 2017, Manufacturer: DMG MORI, Type: DMU 75 monoBLOCK, Year of manufacture: 2017, Serial number: 12430007443, Operating hours: 28,368, Spindle hours: 11,627, Control system, Manufacturer: Heidenhain, Type: iTNC 530, 21" Operator terminal ERGOline Touchscreen, Tool changer, 63-position SK 40, Travel range X/Y/Z: 735 x 650 x 560 mm, Spindle speed max.: 12,000 rpm, Machine table clamping area: 1,000 x 650 mm, Coolant system, Oil mist extraction, Chip conveyor, Chip cart +++ IMPORTANT: This machine is part of an online auction! +++ Kedpfxez Tluco Akpodu

Condition: used, Year of construction: 2005, operating hours: 10,329 h, functionality: fully functional, overall weight: 12,000 kg, Manufacturer: Fidia Type: K 165 Kdjdpfx Akoz Rmn Sjpju Type: 5-axis machining center Technical data: Year of manufacture: 2005 Table size: 1400 mm x 820 mm X-axis travel: 1000 mm, Y-axis travel: 620 mm, Z-axis travel: 700 mm Control system: Fidia C 1 Maximum table load: 2000 kg Weight: 12,000 kg Currently in operation. I will be publishing detailed technical specifications shortly.

Condition: excellent (used), Year of construction: 2023, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: 4110, travel distance X-axis: 4,500 mm, travel distance Y-axis: 1,400 mm, overall weight: 11,000 kg, spindle speed (max.): 4,000 rpm, coolant supply: 7 bar, spindle motor power: 13 W, number of spindles: 1, number of slots in tool magazine: 14, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, CMA GRD 4514 Kedpfx Ajzuw Eqokpsdu The CMA CNC machining center GRD 4514 offers a highly efficient solution for flexible drilling, threading, and milling operations in an extended format. Equipped with a 13.1 kW motor and a spindle speed of 50 to 4000 rpm, the system enables effortless drilling of holes up to 36 mm, as well as the cutting of threads up to M24 (based on ST 40 and HSS-Co cutting insert drills). - Extended work area and travel ranges: Table dimensions: 4500 x 1330 mm (effective machining length X-axis: 4500 mm) - Travel ranges X/Y/Z: 4500 x 1450 x 500 mm - Chip conveyor: Directly integrated into the machine table for optimal chip removal Productivity through pendulum operation: Thanks to the generous X-axis travel of 4500 mm, this variant is ideally suited for efficient pendulum operation. You can safely load and unload workpieces on one half of the table while the machine produces uninterruptedly on the other half. Protection is provided on the front side by a dynamically moving laser area sensor on the machine head. Software & Intelligent Control: Graphical programming: Including automatic determination of cutting data and nesting of multiple products, even different ones, on the large table. Collision warning: Integrated protection for maximum process safety. Height correction: automatic measurement and correction of the workpiece height for 100% precise countersinking and reaming. CAD/CAM extension: Optionally, a conversion of 2D/3D drawings directly into DIN/ISO machine programs is possible. Standard equipment of the complete system: - Automatic tool changer for 14 tools - Automatic tool length measurement - Fixed light curtain in the Y-direction (500 mm above the table) and rear protective fence - Powerful coolant system with emulsion - Ethernet connection for fast remote service

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 665001, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 450 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, workpiece weight (max.): 2,000 kg, total height: 2,300 mm, total length: 3,300 mm, total width: 2,300 mm, table width: 700 mm, table length: 850 mm, table load: 2,000 kg, overall weight: 7,700 kg, spindle speed (min.): 3,000 rpm, spindle speed (max.): 40,000 rpm, number of slots in tool magazine: 40, Equipment: documentation/manual, OPS INGERSOLL OPS 650 CNC machining center - Table T-slot quantity: 5 - T-slot dimensions: 18H12 - Distance HSK tool holder - table: 550 mm - Main spindle tool holder: HSK-E 40 - Positioning accuracy TP according to DIN ISO 230-2: 0.005 mm - Repeatability: 0.002 mm - For further technical data, see the photographed data sheet - Including technical documentation - Including workbench and accessories such as HSK-E 40 tool holders, equipped with tools - Workbench dimensions: approx. 1500 x 900 x 1100 mm Attention: The item must be collected between July 21 and July 23, 2026, on a date to be determined. FCA D-73529 Schwäbisch Gmünd - loaded onto a truck. Kdsdpoy Tu Ddefx Akpju