Used 5 Axis Vertical Machining Centre for sale (68,406)

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 15 h, YCM UV650 Spindle: SK40 / 15.000 rpm, 17kW toolchanger places: 60 control: Heidenhain TNC640 travel: X:620mm Y:520mm Z:460mm B:-50 / +110 C:360 Cudvmk0H spindle cooling system Blum laser for tool length measurement 3D probe el. hand wheel Emulsion cooling ICS 20bar outer cooling cooling gun chip conveyor machine dimensions: L:4250mm W:2310mm H:2.560mm weight: appr. 12.500kg

Year of construction: 2003, Condition: good (used), Traverses X Y Z: 810 x 610 x 500mm, Bq8C8X9G Table 350mm diameter, C axis (rotary) 360o, A axis (Tilt) +30o/-120o, Spindle speed 12000 rpm, Spindle taper BT40, Spindle Motor 13kW, Rapid feedrates 43m/minute, Heidenhain TNC530, 30 Station side arm ATC, Coolant, Low Volt light

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, travel distance X-axis: 200 mm, travel distance Y-axis: 440 mm, travel distance Z-axis: 305 mm, 5-Axis CNC Vertical Machining Centre for Drilling, Tapping, Milling + TURNING P3Cvscqtq BROTHER - Speedio M140X2 New in 2017 Brother C00 Control Table diameter 140 mm 2-Axis NC Rotary Swivelling MILL/TURN table C-Axis 360° A-Axis -120° ~ +20° X 200 mm Y 440 mm Z 305 mm Milling spindle Spindle taper BT 30 Spindle drive motor 4.9 KW Spindle speeds to 16000 rpm Turning spindle Spindle drive motor 4.2 KW Spindle speeds to 2000 rpm 22 station tool magazine Said to be in excellent condition Proposal Number MV-6403

Condition: used, Year of construction: 2013, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 720 mm, total height: 33,550 mm, total length: 52,500 mm, total width: 35,730 mm, table width: 820 mm, table length: 3,500 mm, table load: 2,500 kg, spindle speed (min.): 35 rpm, spindle speed (max.): 18,000 rpm, power: 0.035 kW (0.05 HP), Equipment: documentation/manual, CNC Control Mazatrol Matrix 2 Table size 3500 x 820 mm Table load 2500 kg Number of pallets 1 Movement X-Y-Z-axis 3000 - 800 -720 mm C-axis (table rotation) 0,0001° B-axis travel ± 110° Spindle speed 35 - 18.000 R/min Spindle taper HSK-A63 Bm0Kantay0 Spindle motor 35-26 kW Magazin capacity 30 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Year of construction: 2007, Condition: good (used), OKK VP 400 5 AXIS VERTICAL MACHINING CENTRE MAKE OKK MODEL VP 400 YEAR 2007 CONTROL FANUC 310IS A5 TABLE SIZE DIA. 350.0 mm TABLE LOAD 200 KGS TRAVERSES (XYZAC) X: 600.0 mm Y: 410.0 mm Z: 460.0 mm A: -120 to +30 degrees C: 360 degrees SPINDLE SPEED 100 – 12,000 RPM SPINDLE TAPER 7/24 # 40 SPINDLE NOSE TO TABLE 150 – 610.0 mm SPINDLE MOTOR 22/18.5 kW RAPID TRAVERSE RATE: (X, Y, Z) 48/48/36 m/min ATC 30 stations SPINDLE TAPER BT 40 MAX. TOOL LENGTH 300.0 mm MAX. TOOL WEIGHT 7 KG TOOL CHANGE TIME 1.2 SEC PLUS BIG PLUS BT 40 SPINDLE 2 SPEED TOOL CHANGER CERAMIC SPINDLE BEARINGS Ckhiefeky8 SIMALTENOUS 5 AXIS THROUGH SPINDLE COOLANT RENISHAW MP10 PROBE RENISHAW MEASUREMENT TWIN AUGER CONVEYORS SPINDLE CHILLER

Condition: used, Year of construction: 2011, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 720 mm, controller manufacturer: Mazatrol, controller model: Matrix, total height: 3,355 mm, total length: 5,250 mm, total width: 3,600 mm, table width: 820 mm, table length: 3,500 mm, table load: 2,500 kg, overall weight: 14,000 kg, CNC 5-Axis Traveling Column Vertical Machining centre CNC Control Mazatrol Matrix Table size 3500 x 820 mm Table load 2500 kg Number of pallets: 1 Movement X-axis 3000 mm Movement Y-axis 800 mm Movement Z-axis 720 mm C-Axis (round table) 360° B-axis travel +/- 110° Spindle Taper MAS Big Plus BT 40 Spindle speed 35 - 18.000 1/min Spindle motor 35/26 kW Magazin capacity 48 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock. Dqpfdn

Condition: used, Year of construction: 2021, travel distance X-axis: 1,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 740 mm, controller manufacturer: Fanuc, controller model: Series 0i-MF Plus, workpiece diameter (max.): 800 mm, total height: 34,350 mm, total length: 55,750 mm, total width: 46,210 mm, overall weight: 18,000 kg, Equipment: documentation/manual, CNC 5-axis Vertical machining Centre CNC Control Fanuc Series 0i - MF Plus Table size Ø 800 mm Number of pallets 1 Maximum workpiece dia x height Ø 1200 x 300 mm Movement X-Y-Z-axis 1600 x 700 x 400/740 mm C-Axis (table rotation) 360° B-Axis travel -11 /+30 ° Brvgskswoo0 Spindle speed 15.000 r/min Spindle Taper Big Plus BT40 Spindle motor 18,5/15 kW Magazin Capacity 60 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 1996, operating hours: 12,864 h, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, controller manufacturer: Millplus, controller model: V331, total height: 22,730 mm, total length: 30,500 mm, total width: 22,600 mm, table width: 614 mm, table length: 900 mm, overall weight: 5,800 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 6,300 rpm, Equipment: documentation/manual, 5-axis Vertical machining Centre CNC Control Millplus V331 Table size Ø 900 x 614 mm Movement X-Y-Z-axis 800x650x550 mm C-axis (table rotation) 360° A-Axis (table tilt) 0-30° Spindel speed 20 - 6300 R/min Bkgsdrfn Spindle Taper DIN 69871A/40 Spindle motor 17/11,5 kW Magazin capacity 25 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), spindle speed (max.): 12,000 rpm, We have for sale a 5-axis machining center by DMG DMU 125 duoBLOCK. Kv8V2Dzxy The machine is in perfect technical condition. The spindle was replaced in 2022 (the machine has worked about 2000 hours on the new spindle). New machine hydraulics this year. Workpiece probe included in the price. Spindle cooling X1250 Z1000 Y1000 Iso 40 12,000 spindle revolutions Table: 1250 x 1000 Heidenhain iTNC 530 After measurements, most items with micron vanes!!! We can provide complete delivery including installation.

Year of construction: 2002, Condition: excellent (used), FIDIA K197 CNC Machining Center ​in very good and working condition​.​ Iuis707Tn

Condition: good (used), Year of construction: 2011, Traverses X Y Z: 762 x 508 x 610mm, Dqt8Cx Table 1016 x 508mm, Spindle speed 40 – 12000 rpm, Spindle taper CAT40, Winmax Control, 24 ATC, Coolant, swarf conveyor, Low volt light, Kitigawa 2 axis rotary table.

Condition: used, Year of construction: 2005, Clamping area 630 x 500 mm X axis - 630 mm Y axis - 765 mm Z axis - 510 mm A axis - 0,001 deg. (+30/-120 deg.) C axis - 0,001 deg. (360 deg.) Spindle speeds 35-12000 rpm Spindle taper BT 40 Control: Mazatrol 640 M 5X Equipped with: Bsnozukuynq Coolant through spindle (20 bar) This machine needs a recondition of the main spindle

Condition: used, Year of construction: 2013, Primacon PFM 4024-5D Year of manuf. : 2013 Control : Heidenhain iTNC 530 Speed : 42000 rpm Movement X/Y/Z : 400/240/436 mm Tool holder : HSK-E40 _____ Description: Spindle: Technology:Motorspindle Speed:42.000 rpm Power (max.):16,6 kW Taper:HSK-40 NC-Swivelroundtable: B-Axis:-105°/+20° C-Axis:360° Workpiececlamping:EROWA PowerChuck ø150 mm In general: Toolmagazine:60 stations Rapid travers in X/Y/Z:40 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Cooling pump Workpiececlamping:Touch probe, Renishaw OMP 40-2 Automation I:Automatic Door, pneumatic Automation II:Interface robot Further Accessory:Blow-off station in working are, Spindle chiller Ce8Trlp

Condition: used, Year of construction: 1980, 5-axis CNC vertical machining center / CNC milling center CHIRON FZ 18 S, year of manufacture: 1980, inventory number: 5014-025, 1 tool storage with 36 places, tool holder SK 40, 1 coolant preparation / chip conveyor Knoll, 1 hydraulic unit, 1 oil mist extraction, 1 control panel, 1 Siemens Sinumerik control, drive defective, unit available for repair Note: The sale takes place in an online auction against the highest bid. Please follow the link for further information. Qgwtnguvs

Condition: good (used), Year of construction: 2012, Table size 3500 x 820mm, Traverses X Y Z; 3000 x 800 x 720mm, Baq2Ts9Bi spindle to table min-max 140 – 860mm, 35KW spindle power, spindle speed 18,000rpm, spindle taper BT 40, 30 station ATC, B axis -/+ 110 degrees, C axis 0.001 degrees, Mazatrol Matrix 2 control, swarf conveyor, through spindle coolant, spindle probe,

Condition: used, Year of construction: 2011, Kern Triton Year of manuf. : 2011 Control : Heidenhain iTNC 530 Speed : 40000 rpm Movement X/Y/Z : 500/500/400 mm Tool holder : HSK-E40 _____ Description: In General: Year of manufacture:2011 Control:Heidenhain iTNC 530 Traverse paths X/Y/Z:500/500/400 mm Speed:40,000 rpm Tool holder:HSK-E40 Sdc8Qosmkt Spindle: Technologie:Motorspindel Drehzahl:40.000 U/min Leistung:max. 47 kW Drehmoment:max. 23,6 Nm Werkzeugaufnahme:HSK-E40 NC-Swivel rotary table: Manufacturer:Peiseler Type:ZASD 160 A-axis:-10°/+100° C-axis:360°, Clamping surface:160 mm Clamping system:EROWA Tool magazin: Technology:disc magazine Number of stations:50 Tool changer:Double gripper Equipment: Measuring systems:Direct in all axes Chip disposal:Chip conveyor Coolant supply:IKZ system Workpiece measurement:Renishaw preparation Tool measurement:BLUM laser Oil mist separator:Electrostatic Set-up operation:Electronic handwheel

Condition: used, Year of construction: 1997, 5-axis CNC vertical machining center / CNC milling center CHIRON FZ 18 W Magnum high speed, year of manufacture: 1997, inventory number: 5014-004, 1 tool storage with 20 places, tool holder SK 40, 1 cassette, approx. 1,000 x 1,000 mm, 1 coolant preparation / chip conveyor Knoll, 1 oil mist extraction, 1 control panel, 1 Siemens Sinumeric control Qgnjmo2So Note: The sale takes place in an online auction against the highest bid. Please follow the link for further information.

Condition: good (used), Year of construction: 2015, Traverses X Y Z: 762 x 406 x 508mm, Table 914 x 356mm, Spindle speed 0 - 12000rpm, Spindle taper BT40, Spindle Motor 30Hp, 4th & 5th axis trunnion table HAAS Control, 24 Station ATC, Through spindle Coolant, swarf auger, Bn3Uvadcpoy

Condition: as good as new (ex-display), Year of construction: 2024, Priminer C 500-5X Year of manuf. : 2024 Control : Heidenhain TNC 640 Speed : 15000 rpm Movement X/Y/Z : 700/550/500 mm Tool holder : HSK A63 _____ Description: In General: Year of construction:2024 Control:Heidenhain TNC 640 Traverse paths X/Y/Z:700/550/500 mm Speed:15,000 rpm Workpiece diameter max.:700 mm Spindle: Technology:Inline direct drive Speed :15.000 rpm Power :33,5 kW Torque :135 Nm Tool holder :HSK 63 NC-swivel table: B-axis:+30° / -120° C-axis:360° Table diameter:400 x 500 mm Table load max.:300 kg Tool magazine: Technology:Chain magazine Tool changer:Double gripper Number of stations:60 Tool length max.:300 mm Cdcyzjc900 Tool diameter max.:125 (80) mm Equipment: Measuring systems:Direct in all axes (glass scales) Chip disposal:Chip conveyor Coolant supply:Internal coolant system, 20 bar Workpiece measurement:Touch probe Workpiece measurement:BLUM laser Set-up mode:Electronic handwheel

Condition: excellent (used), Year of construction: 2021, Traverses XYZ: 610 x 406 x 406mm, 400mm Diameter table, max table weight 226kg, table tilt +120°, -35°, 22.4kW, 10000rpm, BT40, 30 station tool changer, through spindle coolant, swarf conveyor, high speed machining. WIPS Blel7Qjx

Condition: used, Year of construction: 2022, GROB G350 - PW Year of manuf. : 2022 Control : Siemens Siemens 840 Dsl Speed : 16000 rpm Movement X/Y/Z : 600/770/805 mm Tool holder : HSK 63 _____ Description: In General: Year of construction:2022 Dpb07Z Control system:Siemens 840 Dsl - GROB4Pilot Traverse path X/Y/Z:600/770/805 mm Speed:16,000 rpm Tool holder:HSK 63 Spindle: Technology:Motorised spindle Speed:16,000 rpm Max. power:approx. 32 kW Max. torque:approx. 206 Nm Tool holder:HSK-63 NC swivel table: A-axis:-185°/+45° C-axis:360° Measuring systems:Direct Clamping surface:400 x400 mm Max. table load:approx. 300 kg Workpiece clamping system:4x fluid connection Tool magazin: Technology:magazine Number of stations:50 Max. tool length:365 mm Equipment: Measuring systems:Direct in all axes Chip removal:Chip conveyor Coolant supply:IKZ system, 40 bar Workpiece measurement:Infrared measuring probe Tool breakage monitoring:Electromechanical Automation:Pallet changer with set-up stations

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 350 x 550 x 510mm, table size 500 xx 400mm, workpiece weight 200kgs, workpiece size 500mm diameter x 350mm high, A axis -120/+30 degrees, C axis 360 degrees, Spindle speed 12,000 rpm, P0Nnf2R7Qj Spindle taper BT40, 30 Station ATC, coolant, Mazatrol Smooth Control, coolant, swarf conveyor.

Condition: excellent (used), Year of construction: 2018, Traverses X Y Z: 350 x 550 x 510mm, R8Yolgouln table size 500 xx 400mm, workpiece weight 200kgs, workpiece size 500mm diameter x 350mm high, A axis -120/+30 degrees, C axis 360 degrees, Spindle speed 12,000 rpm, Spindle taper Din40, 30 Station ATC, coolant, Smooth Control, through spindle coolant, swarf conveyor

Year of construction: 2004, Condition: good (used), Traverses X Y Z; 680 x 394 x 625mm, B axis -110/+ 65 degrees, Dmx3W3U3V C axis 0.001 degrees, pallet diameter 130mm, maximum workpiece diameter 300mm, maximum workpiece height 250mm, number of pallets 40, spindle taper BT40, 240 Station ATC, spindle speed 12000rpm, Fanuc G-Tech 16I control, through spindle coolant, and swarf conveyor.

Condition: excellent (used), Year of construction: 2016, Traverses XYZ: 750 x 610 x 550mm, 320mm Diameter table, Dnlvcl max table weight 100kg, table tilt -120°, +30°, 14kW, 15000rpm, BT40, 30 station tool changer, Fanuc Oi-MF, swarf conveyor, through spindle coolant,