Used Combi Machine for sale (85,225)

Condition: good (used), Year of construction: 1982, Functionality: fully functional, type of input current: three-phase, MCS Jigger High Temperature 144ºC. Type COMBY-JIGGER JP70. Year 1982. It underwent a complete renovation in 2002 Gelhcdwofqmx Tsvebl Pressure: 3kg/cm2 Capacity: 9170 l Roller width 2,000 mm. Diameter of fabric 1100 mm. Diameter of rollers 324 mm. Additives tank.

Condition: used, Year of construction: 2006, power: 11 kW (14.96 HP), Manufacturer: Robopac Model: Athena 5545 / Combi Gjlhsvlznzecdwvjbl Year: 2006 Type: Automatic L-shaped shrink wrapper and shrink tunnel Seal bar dimensions: 550×450 mm Maximum product height: 120 mm Inverter-controlled belt conveyor speed: 10 – 40 m/min Production capacity: 30-35 packs/minute (depending on product dimensions and shrink film specifications) Power: 11 KW

Condition: ready for operation (used), Year of construction: 2014, operating hours: 38,567 h, Clamping Unit Gbelhowiahajcdwvsl Clamping force 180 tons Additional Equipment Machine including Robot + Safety Cage (without conveyor belt) This Engel Victory 200H/60W/180 combi + Viper 40 was manufactured in 2014. It's a hydraulic injection moulding machine, ideal for precision and efficiency in plastic processing. Consider the opportunity to buy this Engel Victory 200H/60W/180 combi + Viper 40 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Year of construction: 2015, Condition: like new (used), Item: M-09300-Combi-Packer STAINLESS STEEL COMBI PACKER Multipack Producer:Sema Systemtechnik Golhsh Hq U Uocdwvobl Machine Model: 1400s-FN-TPW Year of production: 09/2015 Complete Stainless Steel That is not used long time, like new one!

Condition: like new (used), Year of construction: 2006, operating hours: 33,107 h, Functionality: fully functional, Top machine from clean room production (pharmacy) - with turntable 820 mm - with GEKU robot SR 500 ST x=600 y=1400 z=2500 mm - only 33,107 operating hours - Protective housing/ protective cage - Horizontal conveyor belt - hardly any paint damage / almost new condition - fully functional The machine can be inspected under power by arrangement Technical data Manufacturer Engel Type V 330H/80V/130 Combi Serial number 162036 Year of manufacture 2006 Operating hours 33107 h Dimensions L/W/H see drawing Weight 10600 kg Functionality full Condition excellent Special Control unit CC 200 Screw ⌀ 25 / 22 mm Injection weight 72/ 35 gr. Injection pressure 2391/ 2066 bar Injection volume 79 / 38 ccm Clamping force 1300 kN/ 130 to. Tie bar spacing: tie barless Ejector stroke/force 61 kN/ 100 mm Hydraulic clamping unit Motor power follows Heating power follows Total output follows The machine is immediately available in our warehouse in Hanover/Germany and has been tested. Extras Turntable (820 mm diameter) Geku Robot SR 500 ST Protective housing / protective cage Gslsub Umqehcdwvobl CC 200 German English language GEKU Robot details SR 500 ST Simotion control X-axis: 600 mm Y-axis: 1400 mm vertical Z-axis: 2500 mm horizontal A-folding axis: SWM 45 C-axis : Servo Gripper: SWS16 B-axis: not available Guarantee Warranty until first commissioning Loading/shipping Free loading on the buyer's truck or free delivery against freight reimbursement from our warehouse in Hanover /Germany Financing - On request - Hire purchase option Price on request

Condition: excellent (used), Year of construction: 2018, Engel Victory 330H/200V/140 combi Ecodrive / Production line with the Sepro Multi Inject 20 robot / Operating hours: approx. 8,000 h in automatic mode Year of construction: 2018 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Injection pressure: 2400 bar Dosing volume: 113 ccm Clamping unit : Clamping force: 140 t Distance between tie bars: 0x0 mm Size of the clamping plates: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: 2K injection molding machine with rotary table and robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition, the machine worked in a so-called clean room Operating hours: approx. 8,000 in automatic mode Total number of operating hours: 12,005 h Euromap 67 Robot interface Air valve x 6 Hydraulic core pull x 5 Control unit with hot runners x 16 Reinforced injection units - bimetal Main motors - 2 x servo motor controlled with inverter Proportional valves on injection units - precise spraying Built-in pressure quality control system from Sensor Kistler - mold pressure measurement Screw diameter in the vertical injection unit: ⌀25 mm - approx. 58 g/hp It is possible to purchase the original Foboha turntable for an additional charge Turntable diameter: 740 mm In both injection units there is an option to replace the screw diameter with a smaller or larger one Robot Sepro Multi Inject 20 Year of construction: 2018 4-axis robot: 4 axes are driven by servomotors (electric): X, Y, Z, B (rotation) Travel distances in axes approx.: X-4000, Y-1200, Z-1500 Automatic axis lubrication Touch control panel The safety package for robots Golhcdwswigycsvobl Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions Weight: 10300 kg Length/width/height: 5.56x1.76x3.46 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2015, operating hours: 31,000 h, ENGEL victory 2050H/650V/350 Combi Year of construction: 2015 Control unit type: Engel CC 300 Operating hours: 31000 h 1st injection unit Screw diameter: 70 mm Max. Stroke volume: 1155 ccm Specific injection pressure: 1480 bar 2nd injection unit Screw diameter: 50 mm Max. Stroke volume: 392 ccm Specific injection pressure: 1280 bar Clamping unit Clamping force: 3500 kN Opening stroke: 1640 mm Mold installation height min. : 550 mm Max. platen distance: 1650 mm Clamping platens: 1200 x 1100 mm Accessories: Robot Viper 40 RC 300 Core pull ejector side 2 x Core puller nozzle side 2 x Air core pull 2 x Mold heating 24 x Cascade control 8 compartments Robot Engel Viper 40 RC 300 Gbjlhcdjwc Rxiowvsl Z - axis : 3320 mm X - axis : 1200 mm Y - axis : 1500 mm B - axis : Servo + 90° - 180 ° C - axis : air 0 - 90°

Condition: good (used), Year of construction: 2006, Functionality: fully functional, clamping force: 2,600 kN, Equipment: documentation/manual, Dear Sir or Madam, This Engel is just arriving and is being sold on behalf of the customer from direct production. The machine is of course thoroughly tested and cleaned before being switched off. The machine can be inspected on site under load. Gsljvxkpnehcdwvobl With sunny greetings Nick Schönfeld

Condition: ready for operation (used), Year of construction: 2019, operating hours: 14,674 h, Control Unit Model CC300 microcomputer Brand ENGEL Injection Unit Screw diameter 45mm Gbelhcdwjwhr I Njvol Clamping Unit Clamping force 500 tons Additional Equipment Tool heating: 32 control circuits, max. heating output 60 kW Vacuum compressed air circuits: With Venturi nozzle and pressure switch Solenoid air valves: 2/2-way, R1/2 inch Autoprotect injection monitoring: Self-learning system for mold protection Advanced material package: For thermoplastics up to 350°C, max. reinforcement level 30% This Engel Duo 740 H / 740 M / 500 WPX combi M injection moulding machine was manufactured in 2019. It features a two-plate compact design, minimal footprint, and intelligent servo-hydraulics for reduced energy consumption. The machine includes a CC300 microcomputer control system with a 21.5" full HD touch screen and advanced material package suitable for thermoplastics up to 350°C. For more information about this injection moulding machine, please reach out to us. Application Types Injection Moulding

Condition: excellent (used), Angel Victory 1350H500V/220 Combi Closing 220 tons year 2004 Clamping plan WxH 960x830 Scrow 55mm+40 mm 618 cm3+251 EC100/A03 Minmal mold height 320mm Golhspa Rhbocdwvobl Maximum 730mm

Condition: excellent (used), Year of construction: 2015, Robopac Athena Combi 5545 automatic shrink film wrapping machine The Athena Combi automatic shrink wrapping machine is based on technologies of high-end industrial machines. Due to continuous product development and research, Athena Combi provides great performance, versatility, and user-friendly interface. Because of the outstanding adaptability and accuracy of the machine, makes it possible to use high range of materials for shrink filming. The equipment meets the most stringent safety standards as well. Manufacturer: Robopac Model: Athena Combi 5545 Year: 2015 Gbslhcdov D Eziowvsl Sealing bar dimensions LxW: 550x450 mm Max. product height: 120 mm Min. Product dimensions LxWxH: 50x20x20 mm Capacity: 30-35 packages/minute Max. product weight: 120 kg. Power: 400V / 12kW / 50-60Hz Machine Dimensions LxWxH: 2.700x1.200x1.500 mm Machine Weight: 600 kg.

Condition: excellent (used), Year of construction: 2017, Engel Victory 330H/200V/140 combi Ecodrive / Production line with the Sepro Multi Inject 20 robot / Operating hours: approx. 18,000 h in automatic mode Year of construction: 2017 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Injection pressure: 2400 bar Dosing volume: 113 ccm Clamping unit: Clamping force: 140 t Distance between tie bars: 0x0 mm Size of the clamping platens: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: 2K injection molding machine with rotary table and robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition Operating hours: approx. 18,000 in automatic mode Total number of operating hours: 25,369 h Euromap 67 Robot interface Air valve x 8 Hydraulic core pull x 5 Control unit with hot runners x 16 Reinforced injection units - bimetal Main motors - 2 x servo motor controlled with inverter Proportional valves on injection units - precise spraying Parallel movements Built-in pressure quality control system from Sensor Kistler - mold pressure measurement Screw diameter in the vertical injection unit: ⌀25 mm - approx. 58 g/hp It is possible to purchase the original Foboha turntable for an additional charge Turntable diameter: 740 mm Sepro Multi Inject 20 robot Year of construction: 2017 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel distances in axes approx.: X-4000, Y-1200, Z-1500 Automatic axis lubrication Gbjlowigxxehcdwvsl Touch control panel The safety package for robots Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions Weight: 10300 kg Length/width/height: 5.56x1.76x3.46 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: good (used), Year of construction: 2016, clamping force: 800 kN, Very good condition - CC300 control - Maintained exellent from big danish manufacturer. Gbjlhcevib N Todwvjl

Condition: excellent (used), Year of construction: 2006, Functionality: fully functional, overall weight: 10,600 kg, Hello dear customers, We have great cleanroom machines in our program again. Here we offer this Engel 2-component cleanroom machine from 2006. This machine can be purchased as a package with a GEKU SR 500 ST. A conveyor belt, protective cage and turntable are available as accessories. Gbelhet A Ui Aecdwvjl The machine has run just under 33107 hours in automatic mode. The machine comes from a well-known manufacturer in the pharmaceutical industry, so the machine including handling was subject to very strict maintenance management and is in the very best condition for its age. There is hardly any damage to the paintwork. I would be happy to send you further details and an offer. With best regards Nick Schönfeld

Condition: ready for operation (used), Year of construction: 2008, General Data Machine weight 22200 kg Clamping Unit Clamping force 3000 kN Distance between bars 1090 mm Mould height min 550 Additional Equipment ERC 33/2-F (Year: 2008) Only 1K, second unit was dismantled and scrapped by Engel Machine is tie-bar-less Gbolhcdev T D Nwewvel Handling was dismantled after the last production run and should be reassembled and commissioned by Engel or an expert When the clamping cylinder is fully retracted, the mold area between the two clamping platens is approx. 1,400 mm Dimensions of the measuring surface: a: 4.35 m b: 2.00 m c: 3.28 m / Dimensions of the right-hand cover parallelepiped: Length: 6.70 m Width: 2.00 m Height: 2.28 m Measuring distance: 1.00 m Oil temperature: 40,00 °C /Injection pressure: 21.00 bar/Holding pressure: 86.00 bar/Screw stroke: 130.00 mm/Opening stroke: 497.00 mm/V1, V2, V3: 100.00 %/Ejector P: - bar/Cooling time: 10.00 s/Cycle time: 24.82 s/Shot weight: 264.64 g/Material: HDPE/Injection mould Fa. / Injection mould: 0,00/Drive power: 37 KW This Engel Victory 2050H500V/300 Combi was manufactured in 2008. A hydraulic injection moulding machine, it represents a solid choice for those looking to enhance their production capabilities with a reliable and efficient model. Contact us for more information. Application Types Injection Moulding

Condition: excellent (used), Universal DOUBLE-SIDE SIZING & EDGE BANDING MACHINE (for both 1st and 2nd pass) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 240 - 3200 Numerical Control /Software SINITRA Adjustable feeding speed (m/min ) 10 - 40 (INVERTER C.N.) Safety and sound-proof enclosures/cabins Working line (work units support tables), manual adjustment Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit AS 10 PNEU (Kw 8,1) N° 2 Hogging Units (1 Top + 1 Bottom) DT 10 (Kw 8,1 x 2) Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) SP3 (HighMelt) Option - PU MC30 Band Pressure zone (N.C. adjustment) . Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit IT 90-M (Kw 0,3 x 2) 28m/min Fine Trimming unit (Multi-profile) RF 30 (Kw 0,65 x 2) 25° Corner Rounding unit ( Contour Trimming) AR 34 (Kw 0,35 x 4) Fast System (2 Positions) Milling grooving Unit 2 x FB 32 (Kw 4,5) (0 - 90°) Profile edge scraping unit RB 10 Glue scraping unit RC 05 Spraying Unit (for polishing liquid) Gjljhkthlohcdwvsbl Hot Air Heater (to reactivate the color of plastic tape) PH 10

Condition: excellent (used), Year of construction: 2013, Engel Victory 330H/80V/160 combi Ecodrive / Production line with the Sepro SR S5-25 S3 Trans robot / Operating hours: approx. 18,000 h in automatic mode Year of construction: 2013 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Injection pressure: 2385 bar Dosing volume: 113 ccm Clamping unit: Clamping force: 160 t Distance between tie bars: 0x0 mm Size of the clamping plates: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: 2K injection molding machine with rotary table and robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition Operating hours: approx. 18,000 h in automatic mode Total number of operating hours: 24,312 h Euromap 67 Robot interface Air valve x 5 Hydraulic core pull x 5 Control unit with hot runners x 16 Reinforced injection units - bimetal Main motors - 2 x servo motor controlled with inverter Gbslewigxfehcdwvel Proportional valves on injection units - precise spraying Screw diameter in the vertical injection unit: ⌀22 mm - approx. 28 g/hp It is possible to purchase a turntable Robot Sepro SR S5-25 S3 Trans Year of construction: 2013 3-axis robot: 3 axes are driven by servomotors (electric): X, Y, Z (telescopic) Travel distances in axes approx.: X-2000, Y-1000, Z-1500 Automatic axis lubrication Touch control panel The safety package for robots Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions Weight: 8700 kg Length/width/height: 5.35x1.76x3.42 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2006, clamping force: 800 kN, column diameter: 30 mm, 3 pcs of Very well maintained 2K machines from big Danish Manufacturer. Gbslhev Du U Sscdwvsl Always maintained 100%

Year of construction: 2015, Condition: ready for operation (used), General Data Machine weight 8500 kg Gbslhcdov T D N Dswvjl This Engel Victory 330H/200V/120 Combi was manufactured in 2015. A hydraulic injection moulding machine, it's ideal for precision plastic processing. Consider the opportunity to buy this Engel Victory 330H/200V/120 Combi hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Edges thickness in strips/lippings max) mm 1,3 Panels thickness (min/max) mm 10 / 45 Working width (min/max) mm 244 / 2300 ca. Numerical Control /Software ICOS Open Adjustable feeding speed (m/min ) 8 - 40 Without Transmission bar (Master & Slave system) Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 270 SIZING PART (for each side): Pre-Milling unit 75.30 (Kw 6,6 x 2) EDGE-BANDING PART (for each side): Glueing Unit (P.U.R. Glue + Quick Melt system) 04.1570 + 283.205 Edge coils supporting unit (reels N°) 6 Snipping (end-cutting) unit 08.42 (Kw 0,2 x 2) 40 m/min Fine Trimming unit 08.055 (Kw 0,66 x 2) 0°-30° Multi Function Unit (Profile contour Trimming unit) MFA 08.342 (Kw 0,66 x 2) max 25 m/min Gjlhcdjfi Tkvjwvjbl Corner Rounding unit (Contour Trimming) 08.465 (Kw 0,18 x 4) max 20 m/min Buffing unit 08.617-2 (Kw 0,18 x 2) Free space

Condition: excellent (used), Year of construction: 2015, Engel Victory 200H/60W/180 combi / production line with robot Engel Viper 20 Year of manufacture: 2015 Injection unit: Screw diameter: 22 mm Injection weight: approx. 54 g Injection pressure: 2392 bar Metering volume: 61 ccm Clamping unit: Clamping force: 180 t tie bar distance: 0x0 mm size of clamping platens: 1020x980 mm ejector: hydraulic clamping unit: toggle lever Control: CC 300 - touch screen Additional equipment: 2K machine with the original Engel Viper 20 robot. tie-bar-less machine, hybrid: energy-saving, high-speed and very silent Operating hours: approx. 20.000 h in automatic mode Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 6 Control with hot runners x 36 Reinforced injection units - bimetal The second injection unit is set at an angle, screw diameter fi 15 mm (18 cm³ / 2203 bar) Main motors - 2 x servo motor controlled with inverter Proportional valves on injection units - precise spraying Kistler sensor - mold pressure control Parallel movements The machine has an additional servo motor to drive the mold Outputs / inputs for peripheral devices Robot Engel Viper 20 Year of manufacture: 2015 High-speed robot, 5-axes: X, Y, Z, A, C axes are driven by servo motors (electric) Robot is integrated with the machine and has the additional control panel The safety package for robots Robot with adapter and protective housing Gbslhcdwswigwzevjl Dimensions: Weight: 13200 kg Length/width/height: 5.86x1.98x2.51 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: ready for operation (used), Year of construction: 2011, operating hours: 39,626 h, General Data Machine weight 11600 kg Injection Unit Screw diameter 50 mm Shot weight 361 g Injection pressure 392 cm³ Clamping Unit Clamping force 2200 kN This Engel Victory 750H/330V/220 combi was manufactured in 2011. It's a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this Engel Victory 750H/330V/220 combi. Contact us for more information. Gslevyl R Aehcdwvobl Application Types Injection Moulding

Condition: excellent (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 3 Edges thickness in stips / lippings max mm 1,3 Panels thickness (min/max) mm 10 / 45 Working width (min/max) mm 270 / mm 1300 Numerical Control /Software ICOS open Adjustable feeding speed (m/min ) 10 - 50 Without Transmission bar (Master & Slave system) Top pressure system with rubber belt SIZING PART (for each side): Pre-milling Unit (vertical joint trimmers) 75.30 (Kw 6,6 x 1) EDGE-BANDING PART (for each side): Glueing Unit (P.U.R. Glue + Quick Melt system) 04.1569 + 283.205 Pressing roller (revolver) both for straight and shaped edges (softforming) mm 1.050 Edge coils supporting unit (reels N°) 6 Snipping (end-cutting) unit 08.42 (Kw 0,2 x 2) 40 m/min Rough Trimming unit 08.055 (Kw 0,66 x 2) 0°-30° Fine Trimming unit 08.0582 (Kw 0,66 x 2) 0°-30° Gjljfi Tkgjhcdwvjbl Glue scraping unit 08.50 Buffing unit 08.617-2 (Kw 0,18 x 2)

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 / 40 Gslhcsd Scyhjdwvobl Working width (min/max) mm 225 / 3000 Numerical Control PC 22 /Software WoodCommander Adjustable feeding speed (m/min) 15 - 40 Without Transmission bar (Master & Slave system) Safety and sound-proof enclosures/cabins - Adjustable working line (work units support tables) SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Anti-chipping Milling Unit OPTIONAL Hogging Units KD 11 (2 x Kw 6,6) Milling Unit (vertical Joint Trimmers) UF 20 (2 x Kw 4) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue + Quick Melt system) A3 Edge coils support (No 2 reels) Band Pressure zone (adjustable by N.C.) Snipping (end-cutting) unit HL 84 (2 x kW 0,22) Rough Trimming unit OPTIMAT Pneu (2 x kW 0,55) Multi Function Unit (Profile contour Trimming unit) FK 11 (2 x kW 0,4) No. 3 Milling grooving units UF20 (1 LH x Kw 4.5 + 2 RH x Kw 4) Profile edge scraping unit PN 20 Finish processing unit (Glue scraper + Buffing unit) FA 11

Condition: excellent (used), Universal DOUBLE-SIDE SIZING & EDGE BANDING MACHINE (for both 1st and 2nd pass) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 240 - 2700 Numerical Control /Software SINITRA Adjustable feeding speed (m/min ) 10 - 40 (INVERTER C.N.) Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit AS 10 (Kw 5,8) N° 2 Hogging Units (1 Top + 1 Bottom) DT 10 (5,8 + 5,8) - Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): Golhcdeu Tg Uqewvjbl Glueing Unit (Hot Melt + Quick Melt Unit) SP30 (High Melt + Edge Guide Z-axe) Band Pressure zone (N.C. adjustment) . Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit IT 90-S (Kw 0,3 x 2) speed 28m/min. 0 - 25°. PNEU Fine Trimming unit (Multi-profile, by N.C.) RF 30 (Kw 0,65 x 2) 0 - 25° Multi Function Unit (Profile contour Trimming unit) AR 80 (Kw 0,3 x 2) max 25 m/min - ROTAX motors with automatic tool change (8+8 position store) Profile Scraping unit (Multi-profile, by N.C.) RB 30 Glue scraping unit RC 20 + Spraying Unit (for polishing liquid) Buffing unit SZ 30 (Kw 0,37 x 2) With ‘hopper’ for panels (useful height mm 80), as a buffer, to speed up the work cycle