Used 3 Axis Machining Centre for sale (101,752)

Condition: good (used), Year of construction: 2005, Hurco - VMX30 - 3-Axis Machining Center Year of build 2005 Serial number H-30516 Travel x-axis 760mm Travel y-axis 510mm Travel z-axis 510mm T-slot fixture table size W 510mm T-slot fixture table size L 1510mm Engine power (kW) 11kW Gkodju A Dnpopfx Acmed Machine weight 4800kg

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 1131578, SPECIFICATION Trunnion table size 630mm x 500mm X axis traverse 762mm Y axis traverse 508mm Z axis traverse 508mm B axis tilt +110 deg -35 deg C axis rotation 360 degree Spindle BT 40 Spindle speeds 0-15,000rpm Spindle motor 22.4kW Rapid feed rate X, Y, Z axis 30.5/min Rapid feed rate B, C axis 150 degrees a second Toolchanger capacity 40 + 1 Tools Approx. weight 8900kg   MACHINE EQUIPPED WITH: - Haas CNC Control System Through Spindle Coolant, with Auxiliary Filtration Swarf Conveyor Renishaw Wireless Intuitive Probing System High Speed Machining Lighting Gksdpfxjzr Nf Dj Acmed Enclosed Guarding

Condition: used, The EMMEGI PHANTOMATIC T4 A is a 3-axis CNC machining centre, manufactured in 2005, designed for milling, drilling, slotting and tapping operations on aluminium, PVC and light alloy profiles. The machine is equipped with a 3-axis CNC control system (X, Y, Z), a high-speed electrospindle and an automatic tool magazine with 5 + 1 positions, allowing automatic tool changes during the machining cycle. It also features a dual-output angle head for horizontal and lateral machining operations, providing greater flexibility when processing profiles. The worktable is equipped with 4 automatically positioned pneumatic clamps for secure clamping and accurate positioning of the profiles. Main Technical Specifications CNC control: 3 controlled axes (X, Y, Z) Tool magazine: Automatic Gkodpfx Ao Agv A Recmjd Angle head: Dual-output angle head for horizontal machining operations Pneumatic clamps: 4 Clamp positioning: Automatic Installed power: 7.5 kW Power supply: 400 V, three-phase, 50 Hz Machine weight: 1,950 kg Year of manufacture: 2005 CE marking: Present

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 3087984, SPECIFICATION Swing over front apron 806mm Swing over cross slide 527mm Maximum cutting diameter 533mm Maximum turning length 660mm Spindle nose A2-6 Spindle bore 88.9mm Bar capacity 76mm Maximum spindle speed 3400rpm Spindle motor power 22kW Number of turret tool stations 12 Rapid traverse Z/X axis 24m/min Approximate weight 6500Kg MACHINE EQUIPPED WITH: - Haas CNC control system Live tooling with C axis Collet chuck Tool setting probe Parts catcher Hydraulic tailstock Gkedpfx Acezwurajmjd Servo bar 300 magazine bar feed Swarf conveyor Interlocked guarding Automatic lubrication system Coolant system Manual

Condition: used, Year of construction: 2023, Nakamura Tome AS200L Twin Spindle Turning Centre 5 Axis Machine wtih Nakamura Tome Fanuc CNC Control, Hainbuch Spanntop Mini AXFIX6S Collet Main Spindle, Buck BB206 3 Jaw Chuck Sub Spindle, 15 Position Driven Tool Turret, Renishaw Tool Setting Probe, Parts Catcher, Hydrafeed Multifeed 6S Barfeed, LNS Swarf Conveyor, Filtermist 5800 Oil Mist Filter, Coolant Tank, Transformer. S/No. KL205307 (2023) Location: This lot is located in Birmingham, UK. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Godpfx Acs Afmi Demokd

Condition: good (used), Year of construction: 2016, Experience seamless operation with all movements meticulously controlled by NC technology, ensuring swift and precise cuts every time. Boasting CNC controlled cutting height as standard, this machine provides unmatched versatility and precision in your cutting operations. Tailored for the demands of the roof truss and timber frame industries, this 3-axis CNC upstroke crosscut saw sets the standard for accuracy and reliability with a 700mm saw blade and 7.5hp motor. Whether you're tackling compound angle cutting or executing long scarf cuts, the HMZ-3 delivers flawless results with every cut due to its large cutting height of up to 250mm and capability to handle even the most intricate cutting tasks. An onboard optimisation package is included which allows cutting lists to be test optimised against timber lengths to generate a pre-optimised cutting list. Specification Gsde Agnz Nepfx Acmskd 6000mm infeed capacity Right-to-left feed orientation HM-Z saw unit with 700mm blade and centre-line cutting 4000mm outfeed table Onboard optimisation Outfeed monitor

Condition: used, Year of construction: 2010, Mazak VTC820/30 3-Axis Machining Centre. S/No. 200131 (2010) with Mazatrol Matrix Control, X/Y/Z Travels 3000/800/720mm, Table 3500mm x 820mm, Spindle Speed 18,000rpm, Spindle Taper BT40, B Axis Swivel Head +/- 110, Removable Centre Partition. Country of Origin: United Kingdom Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser. Location: These lots are located in Birmingham & Wolverhampton, UK. Please see individual lot for loading information and charges. Blocking and securing will be at the cost of the purchaser. Gksdpfx Aco Afnlaomod

Condition: used, Year of construction: 2012, controller manufacturer: Heidenhain, controller model: iTNC 530 HSCI, _____ Description: Year of manuf. : 2012 Control : Heidenhain iTNC 530 HSCI Speed : 10000 rpm Movement X/Y/Z : 1050/530/630 mm Tool holder : SK40 General: Tool magazine:24 stations Rapid traverse X/Y/Z:24 m/min Machine weight:7,800 kg Spindle: Technology:Belt spindle Speed:10,000 rpm Tool holder:SK40 Gedjz R Icwopfx Acmokd Fluid delivery:Blow air through the spindle + cooling lubricant through the spindle (IKZ) Work table: Work surface:1,150 x 560 mm Table load capacity (max.):700 kg Travel ranges X/Y/Z:1,050 x 530 x 630 mm Features/Accessories: Chip Management:Chip Conveyor Cooling Management:IKZ System Setup Mode:Electronic Handwheel Probe:Tool Probe (Hexagon)

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 800 kg, number of slots in tool magazine: 30, controller manufacturer: Fanuc, total height: 2,700 mm, total length: 4,080 mm, total width: 2,400 mm, overall weight: 7,000 kg, table length: 1,200 mm, table width: 510 mm, controller model: Oi-MC, coolant supply: 15 bar, spindle motor power: 15,000 W, number of spindles: 1, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, spindle nose: BT40, spindle speed (max.): 12,000 rpm, table load: 800 kg, Equipment: chip conveyor, rotational speed infinitely variable, Doosan NM510 Vertical Machining Centre Machine Type: 3 Axis Vertical Machining Centre Year: 2008 Control: Fanuc Series Oi-MC Condition: Very Good Includes Swarf Conveyor Chiller MCF20 Coolant Filter Autolube 6 x Tool Holders Notes Vice and clamping block in photos not included Technical Specifications Table Size: 1200 x 510mm Table Load: 800kg Travel (X-Axis): 1020mm Travel (Y-Axis): 510mm Gkjdpfx Asv Iq Ezscmod Travel (Z-Axis): 510mm Max Spindle Speed: 12,000rpm Spindle Power: 18.5/15/11kW Spindle Taper: BT 40 Rapid Traverse (X/Y/Z): 36/36/30m/min Tool Storage Capacity: 30 tools Tool Change Time (T-T/C-C): 1.7/3.5sec Machine Dimensions: 4080 x 2400 x 2700mm Machine Weight: 7,000kg Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, 3-Axis CNC Machining Centre – FOM Industrie ARGO 35 – Year 2002 – 4-Position Automatic Tool Magazine FOM Industrie ARGO 35 CNC machining centre, manufactured in 2002, designed for milling, drilling and slotting operations on aluminium profiles. The machine is equipped with a FOM VISION PLUS CNC control system, managing the three axes X, Y and Z, and a 4 kW electrospindle with adjustable speed up to 12,000 rpm. It also features a 4-position automatic tool magazine, allowing different tools to be used during machining cycles. The machining centre is equipped with 4 pneumatic clamps with manual positioning, a retractable pneumatic reference stop and a micro-drop lubrication system using pure oil. Axis movement is performed through linear guides with recirculating ball bearings, with a rack-and-pinion drive system for the X-axis and recirculating ball screws for the Y and Z axes. Technical Specifications Manufacturer: FOM Industrie Model: ARGO 35 Year of manufacture: 2002 Machine type: CNC machining centre for aluminium profiles CNC control system: FOM VISION PLUS Controlled axes: 3 (X, Y, Z) B-axis: Fixed Tool magazine: Automatic, 4 positions Pneumatic clamps: 4, manually positioned Axis Travels and Working Areas X-axis travel: 3,500 mm Y-axis travel: 985 mm Z-axis travel: 370 mm X-axis working range: 3,550 mm Y-axis working range (spindle at 90°): 607 mm Z-axis working range (spindle at 90°): 351 mm Minimum distance between spindle nose and worktable: 0 mm Maximum distance between spindle nose and worktable: 351 mm Axis Speeds and Movement X-axis rapid traverse speed: 28 m/min Y and Z-axis rapid traverse speed: 25 m/min X-axis acceleration: 2.5 m/s² Y and Z-axis acceleration: 4 m/s² Axis guidance: Linear guides with recirculating ball bearings X-axis drive system: Rack and pinion with backlash compensation Y and Z-axis drive system: Recirculating ball screws Axis position detection: Via encoders Electrospindle Manufacturer: FOM Industrie Spindle power: 4 kW (5.3 HP) Spindle speed: 0–12,000 rpm Speed control: Via inverter Tool holder: ISO 30 – DIN 69871 Spindle torque: 3.2 Nm Cooling system: Forced-air cooling Maximum tool diameter: 220 mm Maximum tool length: 200 mm Maximum tool weight: 6 kg Electrical and Pneumatic Specifications Power supply: 400 V, three-phase Frequency: 50 Hz Total power consumption: 7 kW Operating air pressure: 7 bar Air consumption per working cycle: 30 Nl Maximum clamping capacity: 612 mm Overall Dimensions and Weight Length: 5,000 mm Depth: 1,785 mm Height: 2,470 mm Machine weight: 2,200 kg Features and Equipment FOM VISION PLUS CNC control system. Three CNC-controlled axes: X, Y and Z. 4-position automatic tool magazine. Godpfx Acs Abluwomokd FOM 4 kW electrospindle. ISO 30 tool holder. Spindle speed adjustment via inverter. Four pneumatic clamps with manual positioning. Retractable pneumatic reference stop. Fully enclosed spindle head guard. Micro-drop lubrication system using pure oil. Linear guides and recirculating ball screw drive systems. Separate CNC control panel.

Condition: used, Year of construction: 2016, controller manufacturer: Heidenhain, controller model: iTNC 530, _____ Description: Year of manuf. : 2016 Control : Heidenhain iTNC 530 Speed : 18000 rpm Movement X/Y/Z : 600/500/500 mm Tool holder : HSK-A63 Spindle: Technology:Motorspindle Speed:18.000 rpm Power (max.):35 kW Torque (max.):130 Nm Taper:HSK-A63 NC-Swivelroundtable: B-Axis:-5°/+110° C-Axis:360° Clampingsurface:ø630 x 500 mm Tableloading (max.):400 kg Palletclamping:Zeroclamp system, EROWA Automation: Technology:DMG Palettensystem PH 150-8 Palletsize:320 x 320 mm Number of palletstations:10 pieces In general: Toolmagazine:120 Stations Rapid travers in X/Y/Z:50 m/min Gksdpfx As Akgaiocmed Equipment/Accessory: Positionsensor:Direct Scales in all Axes Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with Paperbelfilter and High-pressure, 40 bar Workpiecemeasurement:Touch probe, Renishaw PP 60 Toolbreakagecontrol:Laser, Renishaw TRS 2 Processobservation:Operation mode 4 Further Equipment:Rinsing pistol Further Accessory:10 pieces pallets including vices, Roemheld Hilma MC 100

Condition: used, Year of construction: 2022, controller manufacturer: Sonstige, controller model: Brother C00, _____ Description: Year of manuf. : 2022 Control : Sonstige Brother C00 Speed : 10000 rpm Movement X/Y/Z : 700/400/300 mm Tool holder : BBT 30 Mainspindle: Technology:Directdrive Speed:10.000 rpm Power (max.):26,2 kW Torque (max.):92 Nm Taper:BBT 30 Workingtable: Clampingsurface:800 x 400 mm Tableloading (max.):250 kg In general: Toolmagazine:21 Stations Gkedpfx Aoylrn Aocmsd Rapid travers in X/Y/Z:50/50/56 m/min Equipment/Accessory: Chipmanagement:Chip coveyor Coolingmanagement:Minimumlubrication (IKZ), Company Lubrix V5 4.-Axis:Lehmann EA-510 with Counterbearing Workpiececlamping:Hydrulic, 80-210 bar Contactcontrol:Pneumatic Automationinterface I:Automatic Door (electrical) Automationinterface I:Robotinterface Oilmistseparation:Mechanical extraction, company Sara UC1 SD Columnextention:150 mm Setup operations:Electronic Handwheel Further Equipment:Trafo

Condition: used, Year of construction: 2022, controller manufacturer: Heidenhain, controller model: TNC 640, _____ Description: Year of manuf. : 2022 Control : Heidenhain TNC 640 Speed : 10000 rpm Movement X/Y/Z : 1000/600/600 mm Tool holder : SK40 Spindle: Technology:Belt drive Speed:10,000 rpm Tool holder:SK40 Media feed-through:Blown air + cooling lubricant Working table: Clamping surface:1,200 x 600 mm Tableloading (max.):750 kg General: Tool magazine:40 stations Features/Accessories: Coolant Management:IKZ system with filter and high pressure, 20 bar Chip Management:Chip conveyor Workpiece Measurement:25.50-HDR Tool Measurement:Pick UP wireless 35.40 TS Position Measurement System:Heidenhain linear measurement system (direct) X/Y/Z Setup Mode:Electronic handwheel Gkjdszg Shqepfx Acmsd

Condition: used, Year of construction: 2012, controller manufacturer: Fanuc, controller model: MXP-200FP - ManualGuide, _____ Description: Year of manuf. : 2012 Control : Fanuc MXP-200FP - ManualGuide Speed : 6000 rpm Movement X/Y/Z : 2100/1020/762 mm Tool holder : SK 50 In General: Year of manufacture:2012 Control system:Fanuc MXP-200FP ManualGuide Traverse paths X/Y/Z:2,100/1020/762 mm Spindle speed:6,000 rpm Tool holder:SK 50 Clamping surface:2,300 x 1020 mm Spindle: Technology:Geared spindle Speed:6,000 rpm Max. power:approx. 22 kW Max. torque:approx. 550 Nm Tool holder:SK 50 Work table: Clamping surface:2,300 x 1020 mm Max. table load:3,000 kg T-slots:6x 22 mm, spacing 150 mm Tool magazin: Technology:Chain magazine Tool changer:Double gripper Gkjdpszf T I Nsfx Acmed Number of stations:40 pieces Tool diameter max.:120/240 mm Tool length max.:350 mm Equipment: Chip disposal: Chip conveyor Coolant supply:IKZ pump with filter Emulsion mist extraction:Mechanical Set-up mode:Electronic handwheel Accessories:2x magnetic clamping plate 800 x 400 mm Tool holders:Various SK 50 holders

Condition: used, EMMEGI PHANTOMATIC 3-Axis CNC Machining Centre The EMMEGI PHANTOMATIC is a vertical 3-axis CNC machining centre designed for programmable machining operations on aluminium, PVC and steel profiles. Steel profiles can be processed up to a maximum thickness of 3 mm. Gjdpfx Ajz Aqmwecmskd The machine is suitable for milling, drilling, tapping and through-machining operations. It is equipped with a 5.5 kW electrospindle, reaching a maximum speed of 18,000 rpm, with an ISO 30 tool holder and manual tool change. The machine is operated through a CNC/PC control system with Cam-Editor-Drill software. It features four standard manually positioned clamps and two stops. Thanks to the workpiece repositioning function, it can process profiles with a maximum length of 4,800 or 6,800 mm, depending on the machine version. Main technical specifications: X-axis travel: 2,400 mm Y-axis travel: 240 mm Z-axis travel: 230 mm Maximum X- and Y-axis speed: 20 m/min Maximum Z-axis speed: 14.6 m/min X-, Y- and Z-axis acceleration: 1.66 m/s² Tool change: manual Maximum milling tool diameter: 50 mm Maximum tapping capacity: M8 Standard clamps: 4 Stops: 2 Electrospindle power: 5.5 kW Maximum electrospindle speed: 18,000 rpm Tool holder: ISO 30 Installed electrical power: 7 kW Power supply: 380 V Operating pressure: 6–8 bar Air consumption: 50 Nl/min Maximum working length with repositioning: 4,800 mm Maximum working width: 240 mm Maximum working height: 230 mm Dimensions: 2,800 × 1,150 × 1,850 mm Weight: 600 kg

Condition: used, Year of construction: 2020, CMS Athena 3015 5 Axis Machining Centre with OSAI Control. (2020) Traverses X Y Z; 3200 x 1500 x 900mm, B Axis -/+ 120 degrees, C Axis -/+ 370 degrees, Spindle Power 15Kw, Spindle Speed 24,000rpm, 8 Station Tool Change, Tool Size HSK63F. S/No. 9985, Machine Dimensions: 5800 x 2700 x 3350mm, Machine Weight: 7700kg Location: These lots are located in Leicester, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Gsdpfx Acj Ah Evbomekd

Condition: used, Year of construction: 2020, 5-axis CNC machining center Manufacturer: Houfek Type: Scorpion CE21RA Year of manufacture: 2020 Technical data - Workpiece size: 3200x2100x150 mm - Travel ranges X / Y / Z: 3900 / 2750 / 350 mm - Rapid traverse X / Y / Z: 70 / 70 / 35 m/min - Spindle: HSD ES 779 L 6P, 22 kW, max. 24,000 rpm HSK A63 - Drilling unit: 36 drilling spindles, grid 32 mm, stroke 70 mm, 1.7 kW (3 pcs.), drill chuck D = 10 mm (side screws) - Chain tool changer: 60 tools, max. length 180 mm, max. 100 mm, max. 3 kg, servo motor - Disc tool changer: 21 tools, max. length 150 mm, max. 150 mm, max. 5 kg, servo motor (additional controlled axis) - Vacuum table: Grid table (nesting), 8 zones, controlled via the control panel - Additional connections: pneumatic 4x pairs 6 mm (external clamping elements), vacuum 4x pairs 12 mm (templates, fixtures) - Machine accuracy: 0.1 mm / 1000 mm - Repeatability: 0.05 mm Gksdo Aiubdjpfx Acmjd - Flatness and squareness X, Y, Z: 0.1 mm / 1000 mm - Electrical connection: 3/N/PE 400 V, 50 Hz, rated current 117 A, control voltage 24 V DC, IP 54 - Compressed air: min. 7 bar, approx. 300 l/min Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 2015, - USED - 5-AXIS VERTICAL MACHINING CENTRE WITH ROTARY AND TILTING TABLE X-AXIS TRAVEL: 410 mm Y-AXIS TRAVEL: 610 mm Gsdpfxo Ah I Eaj Acmjkd Z-AXIS TRAVEL: 510 mm DISTANCE SPINDLE NOSE-TABLE: 20-530 mm RAPID FEEDS X-Y-Z: 36 - 36 - 24 m/min SPINDLE: 15000 rpm; ISO 40 A-AXIS: -120°  +30 ° C-AXIS: 360 ° TABLE DIAMETER: 320 mm MAX ADMITTED LOAD: 100 Kg MAX MACHINABLE PIECE DIMENSIONS: ø 400 X 300 mm HIGH PRESSURE COOLANT: 20 Bar TOOL MAGAZINE: CHAIN-TYPE ; 30 POS CONTROL UNIT: HEIDENHAIN iTNC 530 WEIGHT: 7300 Kg OVERALL DIMENSIONS: 2820 x 2500 x 3140 mm ACCESSORIES: SWARF CONVEYOR ; TOUCH PROBE ; PORTABLE HANDWHEEL

Condition: ready for operation (used), Year of construction: 2011, Feeler QMP-23A 5 Axis Vertical Machining Centre Model: QMP-23A Fanuc Series Oi-MD Control Remote Electronic Hand Wheels 5 Axis Trunnion Table Travels: X: 580mm (48m/min) Y: 420mm (48m/min) Z: 510mm (48m/min) Spindle Nose to Table Surface: 80 – 590mm Gedpfx Aeygct Ejcmekd Spindle Centre to Column Surface: 510mm Table Surface to Floor 820mm Table Centre to Column Surface: 245 – 665mm GANRO TR-150S (TRS Range) Y Axis Tilting Rotary Table 150mm Capacity YOM: 2015 *For sale with Jet Machinery Ltd* Stock No: 79020 Serial No: VKC064 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2013, machine/vehicle number: 0-201-24-0260, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance Z-axis: 600 mm, workpiece length (max.): 4,200 mm, workpiece width (max.): 2,075 mm, number of slots in tool magazine: 18, controller manufacturer: HOMATIC, controller model: PC85, spindle motor power: 15,000 W, Equipment: CE marking, documentation/manual, CNC-controlled machining center in a gantry design, for milling and drilling of panel-shaped workpieces, in combination with a gluing unit. Machine with shuttle console tables and 4 (+1) interpolating axes. The machine is equipped with 1 main spindle in a 5-axis design, as well as 1 gluing unit for the simultaneous and independent processing of 2 workpieces, mounted on the front (gluing unit) and rear (5-axis milling spindle) of the Godpfx Acs Afabasmjkd gantry traverse. Workpiece length X max. (all units) - max. 4200 mm with single workpiece - max. 2040 mm with alternating workpiece Workpiece length max. (with gluing unit) - max. 4200 mm with single workpiece - max. 1850 mm with alternating workpiece Workpiece width Y max. (all units) - max. 1850 mm Workpiece width Y max. (cutter D=25 mm) - max. 2075 mm Workpiece thickness - max. 300 mm incl. clamping devices when used as a surface milling machine. - max. 60 mm with standard clamp. 2 individually movable console clamping tables AP automatic console and vacuum cup positioning - 8 movable consoles (4 per table) with 1 stop at the front - Console length approx. 2050 mm - 4 automatically positionable platforms per console - 6 lifting rails (3 per table) - Side stops table 1: 3 pcs., table 2: 1 x left, 1 x mirrored - 14 x autom. stop pins for covering layer overhang - 1 vacuum circuit per table - 2 BUSCH vacuum pumps each 300 m3/h - 16 pcs. vacuum cups 160x115 mm - 8 pcs. vacuum cups 125x75 mm - Chip conveyor belt - Chip scraper conveyor, conveying height 1300 mm - Energy chains (cable carrier) in a closed design Equipment / Units: - Milling spindle 15 kW DRIVE 5+, liquid cooling Speed min/max: 1500 - 24000 rpm - Tool changer 18-position disc - C-axis with electrical interface - 5-axis spindle (fully interpolating) - Drilling unit 2.2 kW, 17 spindles vertical (11x / 7y) 4 spindles horizontal, speed-controlled - Sawing/drilling unit swiveling 0/90 degrees - Sawing unit D=125 mm - Gluing unit 360 degrees, with push device - 6-position edge magazine with automatic roll change Cleaning and pushing device WANDRES Control system / Software: - Operating system PC85 - WoodWop 6.1 - Flexible edge following control - Wood Design Package - CAD Plugin - DXF interface - Schuler MDE - incl. 2 video surveillance units Available from week 46/2026

Year of construction: 2008, condition: used, functionality: fully functional, machine/vehicle number: C105253, 3-axis milling machine 8 pneumatic clamps with auto, independ positioning 2x automatic toolmagazine for 2x 5 tools Gkjdpfxox Eytzo Acmed

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1160235, SPECIFICATION Table size 1370mm x 620mm X axis traverse 1016mm Y axis traverse 660mm Z axis traverse 635mm Spindle nose to table 102 – 737mm Spindle BT40 Spindle speeds 0-12,000rpm Spindle motor 22.4kW Rapid feed rate 18m/min Toolchanger capacity 30+ 1 tools Approximate weight 7750Kg   MACHINE EQUIPPED WITH: - Haas CNC Control Swarf auger High speed machining Co-ordinate rotation and scaling Rigid tapping Godpfx Aozz Ndrocmokd Filtermist extraction system Programmable coolant nozzle Lighting Guarding

Condition: excellent (used), Year of construction: 2003, I sell the 3-axis CNC working centre SCM SCM RECORD 110, year 2003. Configuration: Godpfx Acohhruhemjkd 3-axis main spindle SCM 6,6kW 24.000 rpm Tool magazine 8 positions ISO30 on working head Useful working area 2690x940 x Z 150mm (300mm). 2 working fields, 4 clamping areas - Flachtisch Automatic central system of lubrication. Pump BECKER 5,5KW 244/286 m3/h. fast neu. Gewicht 3200kg Xilog Plus new software controller with full instructions ! Very good condition. Available immediately.

Condition: used, Year of construction: 2000, 5-Axis CNC Machining Centre – EMMEGI SATELLITE TU/6.5 Gkedpfx Ajzhbg Sjcmjd Manufacturer: Emmegi Model: Satellite TU/6.5 5-axis CNC machining centre designed for machining aluminium profiles and light alloys. Ideal for milling, drilling, tapping and complex multi-face machining operations in a single setup, ensuring high precision and productivity. The machine is equipped with a high-speed vertical electrospindle, automatic tool magazine, pneumatic profile clamps, and an Emmegi CNC control system, making it an ideal solution for the production of aluminium windows, doors, curtain walls and architectural aluminium structures. Main Features ✅ 5-axis CNC machining centre ✅ Suitable for aluminium profiles and light alloys ✅ Milling, drilling, tapping and multiple machining operations ✅ High-speed electrospindle ✅ Automatic tool magazine ✅ Pneumatic clamps for secure profile clamping ✅ Pneumatic clamps with automatic positioning along the worktable ✅ Long worktable for machining long profiles ✅ CE marked Technical Specifications X-axis travel: 6,500 mm Y-axis travel: 800 mm Z-axis travel: 300 mm Weight: 6,500 kg Installed power: 26 kW Rated current: 77 A Power supply: 400 V – 3 Phase – 50 Hz