Used Copy Lathe for sale (5,901)

Condition: good (used), Code: 0532 Brand: CENTAURO Model: TC 1200 - CE Standard Mechanical copy turning lathe suitable for the production of stair spindles, table and chair legs, furniture components in general - CE Standard Technical data: : Double cantilever turning assembly with 2 gouges Hydraulically driven saddle Max distance between centres mm 1200 Swing over bed mm 150 Swing over steady mm 90 Spindle speed rpm 900/1500/2200/3000 Saddle speed in both directions mt/min 0/3 Spindle motor power Hp 4 Motor power of hydraulic unit Hp 1 Total power requirement Kw 3,73 Overall dimensions : mm 2400 x 650 x 1540 Coyvptlarq Weight kg 400

Condition: used, Diameter mm Dimensions (L/W/H) mm Cnijujmiee Weight 300 kg Lathe with copying deviceused, good condition, little usedmake Killingertype KM 2500 SGS-testedcenter width approx. 1200 mmcenter height approx. 250 mm M33 / M16 x 1.5 insidemanual copying device approx. 850 mmfour-point driverrotating center point8 speed steps rpmweight approx. 300 kgstorage location 97447 Gerolzhofen, free loaded, unpackedhandover as seen,without guarantee and warranty

Condition: used, Year of construction: 1986, used, top condition cleaned, function checked, test run, manufactured by Hapfo type AP 1000 built in 1986 mach.-No. 44 top width ca.1000 mm top height ca. 200 mm 6-Zackmitnehmer Cnaynpxodg live centre motor 0.75 PS revs 750 - 1500 - 3000 required space ca. l x w x h mm 1600 x 600 x 1400 located in 97447 Gerolzhofen sale in current condition as seen - free on truck -

Condition: used, Automatic lathe, lathe with copying device UMA type F1 NK 60 Machine No. 28-0031 Year of construction 1971 turning diameter max. 150 mm swing diameter over bed 400 mm turning length approx. 200 mm spindle bore in the machine spindle approx. 42 mm Cdi2Tu2Jj3 spindle speed 580 - 930 - 1480 - 2380 rpm. 4 steps main motor power 5,5 kW Mains connection 380 Volt,50 Hz. - Spindle flange for lathe chuck short taper 55021, size 6, flange outer diameter Ø 180 mm - Spindle speed via 4 gear steps - Hydraulic clamping device with expanding mandrel, without spindle bore, clamping diameter Ø 15 mm - right with copying slide, copying device SAUTER type KMCA 61, with hydraulic feed movement - left with cross slide with hydraulic feed movement - coolant unit inserted under the machine bed - hydraulic unit standing behind the machine - Operating instructions, electrical diagram, hydraulic diagram Space requirement automatic lathe with hydraulic unit L x W x H 2900 x 1900 x 1700 mm Space requirement automatic lathe L x W x H 2400 x 1900 x 1500 mm Space requirement hydraulic unit L x W x H 1400 x 850 x 1700 mm Weight automatic lathe 2400 kg Weight of hydraulic unit 400 kg total weight with pallet 3000 kg good condition

Condition: used, machine/vehicle number: 19013, Combined copying milling machine - lathe MICHÄL KÄMPF Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Jmtgud8U

Condition: used, machine/vehicle number: 81001, distance between centres 1,600 mm centre height 300 mm stepless speed adjustment - reconstruction in 1998 7Amtwouns three-jaw chuck 200 mm infeed with rapid traverse steady rest electrical data 400 V / space requirements length - 4,000 x depth - 2,000 x height - 2,400 mm weight approx 6,800 kg  

Condition: used, Year of construction: 1999, SECOND-HAND COPYING LATHE WITH 4 SPINDLES BACCI AND SANDING UNIT TYPE T4MO 250 - Spindles center distance 250 mm. - Max. working lenght 1250 mm. - Knives diam. 35 mm. - Milling motor 11 Kw - Longitudinal sanding unit - Year 1999 - CE RULES U8Arsg0Wi

Year of construction: 1989, Condition: excellent (used), Hydraulic copy lathe for wood Automatic cycle turning system with one programmable copier for one or two passes Hydraulic copying unit with touch probe Maximum distance between centers mm 1300 Maximum diameter mm 250 Tailstock sleeve diameter mm 60 Stroke of the tailstock sleeve mm 100 Bavea2O0J8Q Carriage feed speed mt/min 0/6 Trolley return speed mt/min 7.33 Spindle speed rpm 900/1500/1800/2250/3000/4500

Condition: good (used), Compression medium air, intake pressure 1.0 bar, operating pressure 13 bar, 37 kw engine output Cgteuct0Tm

Condition: good (used), Year of construction: 2009, EMCO TURN E 65 lathe was manufactured in 2009. It features a swing diameter over bed of 600 mm and a maximum turning diameter of 360 mm. The spindle supports a max. chuck size of 250 mm and operates with a speed range up to 4200 min^-1. Perfect for precision tasks, the EMCO TURN E 65 machine we have for sale offers robust performance with its AC motor and hydraulic tailstock. Accessories, tools and clamping devices shown are only included in the scope Br9Mxvg27Na of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well prior hall! Contact us for further details regarding this lathe.

Condition: like new (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 308173, Machine dimension : Length 79" x Depth 39" Speed range of 40 to 2500 RPM. Dqmqhf 40" between centres. 38.1 mm to pass spindle bore. Includes: DRO 3 Jaw Chuck 160mm dia 4 Jaw Chuck 200mm dia Catch Plate Quick change tool post and holders. Coolant The weight is 685 Kg, plus chuck and any accessories.

Condition: used, 630x4000 C2M28F7G Under power.

Condition: ready for operation (used), Year of construction: 1991, Functionality: fully functional, spindle bore: 81 mm, turning diameter: 725 mm, center width: 1,000 mm, TECHNICAL DETAILS Dqlpr2 Center width: 1,000 mm Turning diameter: 725 mm Turning diameter over cross slide: 400 mm spindle Spindle bore: 81 mm MACHINE DETAILS Length (L-R): 2,640 mm Width (V-R): 1,270 mm Height: 1,355 mm Weight: 2.7 tons

Condition: good (used), Year of construction: 2013, Functionality: fully functional, quill stroke: 200 mm, quill diameter: 125 mm, spindle speed (min.): 2 rpm, spindle speed (max.): 1,600 rpm, Price reduction - now particularly favorable! No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control system: R&D control system MTCK/EuroTurn Maximum feed force X/Z: 10.1 / 20.7 kN Quick-change holder: Multifix size D Tailstock Quill diameter: 125 mm Maximum quill stroke: 200 mm Taper sleeve: MK6 Filling quantities Central lubrication: approx. 6 l Hydraulic unit spindle and gearbox: approx. 35 l Torque and power 1st gear, 40%/100% ED: 9,287 / 6,136 Nm 2nd gear, 40%/100% ED: 3,906 / 2,580 Nm Dqkfyv 3rd gear, 40%/100% ED: 2,516 / 1,662 Nm 4th gear, 40%/100% ED: 1,058 / 699 Nm Power 40%/100% ED: 56 / 37 kW Speeds 1st gear: 2 - 137 rpm 2nd gear: 5 - 213 rpm 3rd gear: 17 - 505 rpm 4th gear: 58 - 1,600 rpm Reduction ratio Belt: 1.992 1st gear: 13.079 2nd gear: 5.500 3rd gear: 3.543 4th gear: 1.490

Condition: ready for operation (used), Year of construction: 2002, operating hours: 25,913 h, Functionality: fully functional, machine/vehicle number: 943, spindle bore: 66 mm, turning diameter: 570 mm, quill diameter: 80 mm, center height: 280 mm, spindle speed (max.): 2,500 rpm, workpiece weight (max.): 1,600 kg, TECHNICAL DETAILS Turning diameter: max. 570 mm Turning length: max. 1,000 mm Center height: 280 mm Rotation diameter over slide: max. 340 mm Rotation diameter in the offset: max. 600 mm Chuck diameter: 215 mm max. workpiece weight: 1,600 kg Spindle Spindle diameter (bearing): 100 mm spindle bore: 66 mm Spindle holder: MK 5 Speed range: 1 - 2,500 rpm Tailstock Pinole diameter: 80 mm Power and weight Total power requirement: 30 kW Machine weight: approx. 3 t Switch-on hours (as of October 2024): 25,913 h Cfqlwjztn8 EQUIPMENT - 215 3-jaw chuck RÖHM - Parat holder - Central lubrication - Coolant device - Tailstock

Condition: ready for operation (used), Functionality: fully functional, turning length: 1,000 mm, turning diameter: 250 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,020 mm, Equipment: chip conveyor, TECHNICAL DETAILS Control: OKUMA OSP 5020 L (with dialog control and/or DIN programming) Turret: 12-position Ctgmdim9Nc Tool holder: VDI 40 Turning length: max. 1,000 mm Turning diameter: max. 250 mm Turning diameter over bed: max. 530 mm Turning diameter over support: max. 508 mm Length of travel in the X-axis: max. 260 mm Feed in the Z-axis: max. 1,020 mm Spindle speed: 3,500 rpm Main spindle power: max. 15 kW EQUIPMENT - Three-jaw chuck: KITAGAWA / no through-feed - inserts - Chip conveyor: Mayfran

Condition: ready for operation (used), Year of construction: 2019, operating hours: 9,680 h, Functionality: fully functional, turning diameter: 170 mm, travel distance X-axis: 160 mm, travel distance Z-axis: 310 mm, rotational speed (max.): 6,300 rpm, center width: 600 mm, TECHNICAL DETAILS Travel in X/Y/Z: 160 mm / - / 310 mm max. rod passage: DN 45 mm max. turning diameter: 170 mm Swing diameter over bed: 430 mm Cqcwkj02Oy Center distance: 600 mm (spindle nose - center point) Main spindle max. speed: 0 - 6,300 rpm max. drive power: 11 kW max. torque: 70 Nm C-axis: available Tool turret Number of tool positions: 12 Driven tools: 6 max. speed: 0 - 5,000 rpm max. drive power: 4 kW max. torque: 16 Nm MACHINE DETAILS Machine switched on: 33,250 h Ready for operation / automatic: 30,652 h Production mode: 9,680 h Workpiece counter: 400,014 pieces Machine dimensions: 2,250 x 1,675 x 1,940 mm Bar feeder dimensions: 5,800 x 550 x 1,500 mm Weight: 3,300 kg EQUIPMENT - C-axis and tailstock - Tool turret with 12 positions, 6 of which are driven - Bar loader LNS 6.26 HS 4.4 (year of manufacture 2019) - Large tool package

Condition: good (used), Year of construction: 1998, operating hours: 76,296 h, Functionality: limited functionality, machine/vehicle number: 030901, turning length: 125 mm, spindle speed (max.): 7,000 rpm, spindle speed (min.): 350 rpm, turning diameter: 32 mm, controller manufacturer: Fanuc, controller model: Serie 18i Tb, Star SR-20 sliding headstock lathe in good condition Defect: Cross drive Fanuc drive system defective and was deactivated by Star Micronics. The Star SR-32 is otherwise in very good, used, production-ready condition. No other defects are known. Cr70Yuchjy TECHNICAL DETAILS Control: CNC Fanuc 18i Tb Machining diameter: max. 32 mm Maximum workpiece length: 125 mm Headstock travel: 310 mm C-axis: 1° Number of axes: 7 Drilling capacity fixed tool diameter: 13 mm Drilling capacity rotating tool diameter: 8 mm Tapping: M12 (with driven tool M6) Milling capacity: Ø 10 mm Spindle speeds: 350 - 7000 rpm MACHINE DETAILS Coolant used in the machine: Oil Machine dimensions: 1,700 x 2,512 x 1,700 mm Weight of the machine: 2,900 kg Switch-on time: approx. 100,000 h Operating hours/cutting time: 76296 h Parts counter: 7,232,548 pieces Bar loading magazine: FMB TURBO 5-42 Bar capacity: 5-42 mm (attachment variant "A") Hinged belt conveyor: MAYFRAN Machine dimensions: approx. 1,700 x 2,512 x 1,700 mm Machine weight: approx. 2,900 kg Loading magazine dimensions: approx. 4,500 x 1,000 x 1,800 [mm] Weight of loading magazine: approx. 1,800 kg Dimensions of peripherals & accessories: approx. 1,900 x 700 x 800 mm Weight of peripherals & accessories: approx. 200 kg EQUIPMENT - CE declaration of conformity - Operating tools - Small extinguishing system Kraft and Bauer and CO2 extinguishing agent container (10 kg) There is the possibility of acquiring further objects such as clamping devices, tool holders, HM tools, measuring devices, measuring machines, cooling medium etc. in high quality at a favorable price due to the discontinuation of the trade. Shipping, dismantling and loading costs can be reduced when buying several auction machines from the same seller.

Condition: ready for operation (used), Year of construction: 1993, Functionality: fully functional, machine/vehicle number: 367, spindle bore: 80 mm, turning diameter over bed slide: 510 mm, center width: 2,000 mm, rotational speed (max.): 1,800 rpm, New control system in 2018 TECHNICAL DETAILS Swing over bed slide: 510 mm Swing over cross slide: 340 mm Center width: 2,000 mm Control system: Fagor Spindle Spindle bore: A2-8 Spindle passage: 80 mm Power on spindle: 11 kW Speeds: max. 1,800 rpm MACHINE DETAILS Length (L-R): 4,060 mm Width (V-R): 1,420 mm Height: 1,600 mm Dqlppv Weight: 4 tons

Condition: good (used), Year of construction: 2007, Functionality: fully functional, turning length: 200 mm, spindle speed (max.): 10,000 rpm, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control unit: Mitsubishi Meldas 700 main spindle Machining diameter: 20 mm Machining length without repositioning: 200 mm Spindle clearance: 24 mm Spindle speed: 200 - 10,000 rpm Spindle indexing C-axis: 0.001° Motor power (built-in motor): 2.2 / 3.7 kW Pick-up spindle Machining diameter: 20 mm Spindle speed: 200 - 8,000 rpm Spindle indexing C-axis: 0.001° Motor power: 0.75 / 1.5 kW Driven tools on vertical holder Speed: 200 - 4,500 rpm Motor power (AC servo motor): 1.0 kW Number of tools: 6 Tool system Turning tools (12x12x130): 5 Tool holder/cutting tool (16x12x130): 1 Drilling tools (front): min. 3 Drilling tools (rear): 5 Tool holders, quills (diameter): 19.05 mm Tool holders, turning steels (shank cross-section): 12 mm Ckl8Rqx3Us Collets and guide bush Collet main/tapping spindle: F25 (145E) Guide bush (Neukomm): T223 (22.001) Rapid traverse rates All axes: 32 m/min Machine specification Space requirement (without magazine) L/W/H: 2,430 x 1,085 x 1,770 mm Spindle height: 1,050 mm Machine weight: 2,150 kg Input power: 8 kVA EQUIPMENT - 6 turning tools (12 mm shank cross-section), - 3 driven tools for cross machining - 3 driven tools for end face machining on the main spindle - 3 driven tools for end face machining on the pick-up spindle - Main spindle with C-axis - Counter spindle with C-axis - 3x AGW rear end machining - Yellow warning light - Interior light - Workpiece conveyor belt - Kraft & Bauer CO² fire extinguishing system with fire damper - Loading magazine FMB Turbo 3-26 with two channels

Condition: ready for operation (used), Year of construction: 2008, operating hours: 19,790 h, Functionality: fully functional, machine/vehicle number: 1480 V, turning diameter over cross slide: 830 mm, turning diameter: 1,480 mm, turning length: 820 mm, TECHNICAL DETAILS Machine type: Two-spindle vertical lathe Turret tool holder: 2, each with 12 places Three-jaw chuck: 2 x D630 Turning diameter over bed: 1,480 mm Turning diameter over cross slide: 830 mm Maximum machining length: depending on the workpiece, distance between the face of the clamping jaw and the lower edge of the turret head is 820 mm (depending on the clamping jaw, workpiece and tool height). MACHINE DETAILS Power: 100 kW Weight: 33,000 kg Dqph9J Workpiece counter: 155,117 pieces Switch-on time: 69,643 h Processing time: 11,896 h Cutting time: 19,790 h EQUIPMENT - Automatic workpiece feeder with a capacity for 15 pieces - Automatic workpiece removal with manipulator - Chip conveyor belt - High-pressure cooling system with paper filter - Fanuc drive for precise movements and control

Condition: good (used), Model: TMC 20 Control: Fanuc OTC Cvwpdie0Jc Capacity: 220 x 350mm With: 200mm 3 Jaw Power Chuck Spindle Bore 50mm

Condition: excellent (used), Year of construction: 2011, MAZAK QUICKTURN SMART 200 M CNC LATHE MAZATROL SMART CONTROL 12 TOOL TURRET 360 MM TURNING DIA MAX 500 MM TURNING LENGTH 76 MM BORE FIXED HOLDERS + 3 X DRIVEN TOOLS PARTS CATCHER PROBING SWARF CONVEYOR Dqodvn HYDROFEED MULTIFEED MV 65 BARFEED HYD 3 JAW CHUCK TAILSTOCK 5000 RPM SPINDLE YEAR 2011 MACHINE IS AVAILABLE IMMEDIATELY LOADING FREE OF CHARGE AT OUR PREMISES LOCATION NORTHERN IRELAND

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 76005007020015, turning diameter over bed slide: 630 mm, center width: 750 mm, feed length X-axis: 320 mm, feed length Z-axis: 500 mm, spindle speed (max.): 3,000 rpm, TECHNICAL DETAILS Swing over bed: 630 mm center distance: 750 mm Max. feed in longitudinal direction (Z-axis): 500 mm Max. feed in transverse direction (X-axis): 320 mm Control: Siemens Sinumerik 810D Spindle Spindle bore: A2-8 Spindle passage: 92 mm Power on spindle: 18.5/22 kW Speeds: max. 3,000 rpm Tool turret Manufacturer: Sauter Number of tools: 12 positions, all driven Speed: 4,000 rpm MACHINE DETAILS Required voltage: 52 kVA Length (L-R): 3,650 mm Dqlpdf Width (V-R): 1,738 mm Height: 1,900 mm Weight: 5.25 t EQUIPMENT - Röhm cutting disk, diameter 254 mm - C-axis available - Linear measurement in X-axis - Chip conveyor - RS232 INTERFACE

Condition: good (used), Model: 40N Year: 1990 Control: Mazatrol T32-2 Cuk0Dyvfuk Swing over Bed: 540mm (21.5”) Distance between centres: 2000mm Spindle Speeds: 6-3000rpm Spindle Bore: 166mm Dia. Machine with: 15 station indexing turret 3 – jaw power chuck Tool Prestter Swarf Conveyor