Used forging attachments for sale (31)

Condition: used, Year of construction: 1970, pressure . t stroke . mm impact capacity 60-70 mkp total power requirement . kW weight of the machine ca. 3 t Hnsdeud Tp Njpfx Ag Uog dimensions of the machine ca. . m

Condition: good (used), Turning device, forging device, welding turning device, welding device -for: production of spirals, springs ... -Holder: Ø 88 x 300 mm -Speed: 31 rpm -Drive: 1.5 kW -Voltage: 400 V -Dimensions: 1000/550/H1200 mm Hjdpfx Aecvpuaog Ueng -Weight: 120 kg

Condition: good (used), Year of construction: 2014, operating hours: 9,999 h, functionality: fully functional, Used hammering machine Hodjx Swluopfx Ag Uong Manufacturer: FELSS Model: HE 25 Year of manufacture: 2014 With Induktoterm heating unit

Condition: used, Technical details: Hnsdpeu Nkw Rjfx Ag Uog weight of the machine approx.: 179 kg space requirements of the machine approx.: 0,75 x 0,335 x 0,340 m Use: for forging work Material cast steel Working surface LxW: 510 x 140mm Horn length: 225mm Ø 28 - Ø 110mm Mandrel square 28 x 28mm *

Condition: used, Blow energy: 11000 kg/m Max. stroke: 900 mm Daylight between guides: 750 mm Length of die seat in ram: 750 mm Max. stroke rate: 90 s.p.m. Die seat length in die holder: 1050 mm Min. die thickness: 350 mm Max. upper die weight: 1100 kg Operating height: 780 mm Anvil weight: 75000 kg Hnjdpfx Asvam Enog Ueg Weight of machine approx.: 103000 kg

Condition: used, functionality: fully functional, overall weight: 310 kg, Weight: 310 kg Dimensions: 900x700x1550(h) mm Motor power: 3 kW Solid square: 20x20 mm Solid round: 20 mm diameter Hedpfxox I Rdio Ag Ueng Handrail: 60x12 mm

Condition: good (used), Anvil with base -LxWxH: 1000x350x360 mm (anvil dimensions) -Weight approx. 300 kg Hnodsx N Ew Tspfx Ag Ueg Subject to errors and input mistakes.

Condition: good (used), blacksmith's vise, bottle vise, anvil vise, anvil, blacksmith's anvil, bench vise, locksmith's vise, parallel vise -Jaw width: 135 mm -Wingspan: 150 mm -Number: 9 vises available -Price: per piece -Dimensions: 450/160/H900 mm Hodpfx Agodl E Iro Ujng -Weight: 35 kg

Condition: used, Lasko hammer KGK 063 Impact force 630 mkp Stroke max. 630 mm Bear weight 630kp Hnsdju Eb Nispfx Ag Ujg Top pressure - filling pressure 5 bar

Condition: good (used), Year of construction: 1995, machine/vehicle number: 250 95, Offer 25443 Technical Data: - Ram weight: 40 kg - Impact adjustment - Stroke height steplessly adjustable: 200 mm - Blows per minute: approx. 220 1/min - Throat depth: 280 mm Hjdex A U Ufjpfx Ag Ujng - Anvil height: approx. 560 mm - Anvil weight: 250 kg - Drive: 380 V / 4 kW - Space requirement: approx. W 850 x H 1100 x D 1350 mm - Weight: approx. 850 kg

Condition: used, Blow energy: 4000 kg/m Max. stroke: 520 mm Max. stroke rate: 125 s.p.m. Die height: 350 mm Hsdpfx Agevam Ezs Usng Ram weight: 1760 kg Dimensions L x W x H: 2250x1400x3300 mm Weight of machine approx.: 40500 kg

Condition: used, Automatic Multi-purpose Iron Twister GLASER Type GDM 3 motor-driven rod twisting machine equipped with ring bending attachment, profile bending machine Hjdow Dgi Tspfx Ag Ueng Year of manufacture: 1977 Twisting length: 1200 mm Twisting speed (Level 1): approx. 10 rpm Twisting speed (Level 2): approx. 20 rpm - Spindle drive via large geared motor - Arch and ring bending machine, not complete - with HAWE hydraulic unit up to 600 bar for auxiliary functions - 4-square tool holder for twisting tools Motor power: 3.3 kW Power supply: 380 Volt, 50 Hz Space required (L x W x H): 2120 x 720 x 1100 mm Weight: approx. 600 kg Good condition

Condition: used, Year of construction: 2024, functionality: fully functional, year of last overhaul: 2024, Forging Hammer Type Beche KGH 8.0 Modernization 2023-2024 (Year of manufacture: 1980) The hammer has been completely overhauled in Germany. Hydraulic Drive - Completely disassembled in 2024, cleaned, control valves renewed New Control System Hnjdpfx Agoxwat Ne Usg - Siemens S7-1500F PLC control with touch panel Anvil Base (U-frame) - Contact surface ground - Insert adapted - Wedge newly manufactured and inserted Test Run - Hammer was assembled in 2024 and underwent a test run in 2025 Technical Description: Working capacity: 80 kJ Max. die height: 600 mm (without dovetails) Min. die height: 200 mm (without dovetails) Ram depth: 810 mm Ram weight: 6,100 kg Anvil base weight: 105,000 kg Total weight: 130,700 kg Total height: 7.3 m above floor level

Condition: not inspected (used), Year of construction: 1993, functionality: unexamined, machine/vehicle number: AQ1195020, overall weight: 1,800 kg, Equipment: documentation/manual, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Bidding obligates timely collection between 01/12/2025 and 05/12/2025! MACHINE DETAILS Motor Total power: with hydraulics 5.0 kW / without hydraulics 7.2 kW Hedpfx Agsxp Nqus Uong Voltage: 400 V Total current: with hydraulics 12 A / without hydraulics 18 A Frequency: 50 Hz Motor protection class: IP 55 Hydraulics Max. flow rate: 6.4 l/min Max. pressure: 200 bar Oil tank capacity: 13 l Recommended hydraulic fluid: ESSO Hydraulic Oil HLP32 Dimensions & Weight Dimensions (L x W x H): 1,800 x 1,350 x 1,500 mm Total weight: 1,800 kg EQUIPMENT Accessories as shown in the photos Technical documentation

Condition: ready for operation (used), Romanian Forging Hammer CM 2500 (The hammer is similar to Huta Zygmunt MPM 6300B) - Maximum impact energy at full stroke: 7000 kgm - Ram weight: 2500 kg - Mode of operation: pneumatic - Ram stroke: 850 mm - Number of blows per minute: 100 - Working pressure: 5–7 bar - Anvil weight: 48 t - Total weight: 65 t Romanian Forging Hammer CM 1250 (The hammer is similar to Huta Zygmunt MPM 3150B) - Maximum impact energy at full stroke: 3600 kgm - Ram weight: 1250 kg - Mode of operation: pneumatic - Table size (front to back): 700 mm - Stroke: 800 mm - Number of blows per minute: 110 Hjdpfx Agow Sdxao Usng - Working pressure: 5–7 bar - Max. upper die weight: 400 kg - Die height: 220 mm - Ram (front to back): 500 mm - Air consumption: 15 m³/min - Anvil weight: 24 t - Height of machine above floor: 3750 mm - Total machine height: 4380 mm - Total weight: 35 t

Condition: ready for operation (used), Perforated plate Manufacturer unknown Dimensions 1500x1500mm Working height 940mm --height adjustable-- Screwed feet Plate thickness 110mm Hodpfx Asfpgp Eog Uong Hole diameter 45mm Weight approx. 2.0 tons

Condition: used, Blow energy: 11000 kg/m Max. stroke: 900 mm Daylight between guides: 750 mm Length of die seat in ram: 750 mm Max. stroke rate: 90 s.p.m. Die seat length in die holder: 1050 mm Hjdpfjvam Ebox Ag Uong Min. die thickness: 350 mm Max. upper die weight: 1100 kg Operating height: 780 mm Anvil weight: 75000 kg Weight of machine approx.: 103000 kg

Condition: good (used), machine/vehicle number: 23027, Offer 23027 Hedpfx Agji Dr Tbo Ujng Technical data: - Diameter top / bottom 350 / 750 mm - Wall thickness approx. 45 mm - Foot diameter 750 mm - height 1380 mm - Total weight approx. 600 kg

Condition: ready for operation (used), Year of construction: 1955, An Eumuco screw forging press (Screw-Press) is available. Forming stages: 2, press force: 1250kN, hold-down force: 2500kN, stroke rate: 80rpm, ram stroke: 140mm, hold-down stroke + punch: 100mm, table dimensions X/Y: 680mm/680mm, ram dimensions X/Y: 680mm/680mm, drive power: 35kW. On-site inspection is possible. Hnodewm Nm Tspfx Ag Usg

Condition: excellent (used), Year of construction: 1983, overall weight: 35,000 kg, Energy of blow: 3 600 kgm Ram weight: 1 250 kg. Max. ram stroke: 800 mm Number of strokes per minute: 110 Hnsdpfx Aotgpdzsg Uog Total weight: 35 ton Anvil weight: 24 ton

Condition: ready for operation (used), Forging hammers, C type, capacity 80 kg, 400 kg and 750 kg. Ram weight: 80, 400 and 750 kg. Blow energy: 150, 1000 and 2000 KJ. Stroke: 385, 670 and 835 mm. Strokes/min: 210, 130 and 105. Weights: 3,500 kg / 13,500 kg / 25,000 kg. Hnjdpfjx Ahbfsx Ag Uog

Condition: used, Year of construction: 1978, Blow energy: 7000 kg/m Max. stroke: 850 mm Max. stroke rate: 100 s.p.m. Length of die seat in ram: 650 mm Ram weight: 2500 kg Die seat length in die holder: 900 mm Min. die thickness: 300 mm Max. upper die weight: 800 kg Operating height: 780 mm Anvil weight: 47500 kg Hedjvam D Repfx Ag Ujng Weight of machine approx.: 64000 kg

Condition: ready for operation (used), Year of construction: 1964, Forming stages: 3, press force: 6500kN, stroke rate: 110rpm, ram stroke: 180mm, working range X/Y: 600mm/800mm, table dimensions X/Y: 800mm/1000mm, ram adjustment: 10mm, drive power: 37kW. On-site inspection is possible. Hsdpfx Agswm Nm Hs Uong

Condition: excellent (used), Year of construction: 1981, overall weight: 64,000 kg, Energy of blow: 7 000 kgm Ram weight: 2 380 kg. Max. ram stroke: 950 mm Hnedpjlnk Tyefx Ag Ueg Number of strokes per minute: 100 Total weight: 64 ton Anvil weight: 47 ton

Condition: excellent (used), Year of construction: 1982, total height: 5,600 mm, pressing force: 400 t, air pressure: 6 bar, distance between side stands: 650 mm, distance between stands: 1,600 mm, stroke length: 280 mm, table length: 1,600 mm, table width: 1,120 mm, Trimming press in working condition: Nominal force: 400 ton Hedeubyrxepfx Ag Ujng Stroke: 280 mm Number of strokes per minute: 36 1/min Table size: 1 600 x 1 120 mm Slide size: 1 435 x 960 mm Main electric motor: 37 kW Overall dimensions: - Length: 3 010 mm - Width: 2 135 mm - Height: 5 600 mm Total weight: 50 000 kg.