Condition: good (used), Year of construction: 1964, TECHNICAL DATA Center height above bed 320 mm Swing diameter -over bed 650 mm -over cross slide 400 mm -over crank 700 mm width of crank (in front of headstock) 455 mm turning length 1250 mm Drive power 15 kW spindle head DIN 55022 size 8 spindle bore 81 mm Speed range 11.2 - 1120 rpm Gear stages 3 Number of speeds 19 Step jump 1,25 Tailstock - quill diameter 100 mm Tailstock - taper mounting MK 5 18 longitudinal feeds 0.02 - 1.6 mm/rev Dsln Tlog Rhn Dekujcg 18 face feeds 0,006 - 0,7 mm/rev 73 metric threads 0.4 - 112 mm Machine dimensions L x W x H 3.0 x 1.9 x 1.7 m Machine weight 3300 kg EQUIPMENT/ACCESSORIES 2-axis digital display (Z/x) FAGOR (new) Tailstock incl. 2 fixed centers Coolant device Chip and water trap Reducing sleeve metric 90 MK 5 Longitudinal and cross-cut fence Hydraulic copying device SAUTER Driving flange Face plate ø 600 mm Three-jaw chuck ø 315 incl. clamping jaw set Quick tool change system MULTIFIX size C 6 MULTIFIX cassettes Machine light Operating instructions

Condition: good (used), Year of construction: 2007, operating hours: 21,168 h, machine/vehicle number: 8087020322B, For sale: GILDEMEISTER Sprint 65 linear CNC lathe Model: GILDEMEISTER Sprint 65 linear Year of manufacture: 2007 Control: SIEMENS 840D Operating hours: 21,168h On-time hours: 61,362 h Technical data: - Max. revolutions of main and counter spindle: 5000 rpm - Main spindle passage: up to Ø 65 mm (bore Ø 75 mm) - Rapid traverse speeds: up to 30 m/min Equipment: - 3 turrets with 12 stations each - Turret 1 has a fault and needs to be repaired. - Tool holder VDI 30 - Drive for driven tools on all turret stations - C-axis for main and counter spindle - Y-axis on slide 3 - Counter spindle flushing with coolant flushing - Workpiece collection device - Workpiece conveyor belt - Mechanical preparation for oil mist extraction device - Electrical interface and software preparation for bar loading magazine - Synchronous operation between main and counter spindles - Hinged belt chip conveyor - 2 additional inputs/outputs (4 M functions) - Workpiece counter and time calculator - Rigid thread cutting (without compensating chuck) - Software for polygon turning on slides 1, 2, 3 - Constant cutting speed - Spiral interpolation on slide 3 (thread milling) - Spindle speed monitoring system - Three-color signal light - Air conditioning for electrical control cabinet - High-pressure coolant system with belt filter and heat exchanger (capacity 980 l, pressure 20 bar, 40 l/min. for turrets 1, 2 and 3) - 3-jaw chuck for main spindle Dsln Tjvzwm Eelkujcg - 3-jaw chuck for counter spindle - Coolant spray gun for cleaning the work area - Differential pressure system for the counter spindle with the option of setting 2 different clamping pressures - Flushing of the upper slides with cutting fluid - The machine is powered. Price: €36,000 Location: 75334 Straubenhardt If you are interested or would like further information, please contact us.

Condition: new, Center length ----- 1500 mm Center height ----- 230 mm Spindle diameter ----- 460 mm Main spindle passage ----- 80 mm Bed width ----- 336 mm Spindle speed ----- 25-1800 rpm Motor ----- 5.5 KW HEAVY DUTY VERSION - WEIGHT 2650 KG INCLUDED * 3-axis digital readout brand SINO * Quick-change chisel holder type Multifix TOOB2 with 4 rungs Dcslnjh U Nzts Tlkujg * 3 Chuck 250 mm * 4 Chuck 320 mm * 350 mm clamping plate * Fixed and moving glasses * LED working light and cooling system * Electric brake CE * Box with various tools

Condition: good (used), OKUMA HOWA Type ACT 4 CNC control Fanuc 10 TF Turning diameter 380 mm Rotation over bed 520 mm turning length 750 mm 12-position turret Spindle speeds 20 - 3500 rpm Chuck Tailstock Spindle bore 75 mm Chuck clamping via foot switch Dcelnevf I Dco Tlkuog CAM connection

Condition: used, Year of construction: 2018, Functionality: fully functional, TREPKO S.A. offers for sale the multifunctional machining centre MULTICUT 500iS. Machine parameters: Control: Siemens 840Dsl Turning diameter over bed: 1030mm Max. turning diameter: 690 mm Max. turning length: 1527mm Y axis: 370mm Spindle bore: 106mm Speed: 3500 rpm Power: 25%/constant -74/59kW Milling spindle speed: 12000 rpm Milling spindle power: 25%/constant -27/13kW Taper: HSK A63 B axis: -120º/+ 105º Tool magazine: 81 Chip conveyor Workspace exhaust Doors equipped with Visiports Electrical cabinet air conditioner Interception option workpiece Djln Tewhipqjlkuscg Automatic door opening Cooling through the spindle 60 bar Automatic tool and workpiece probe Hydraulic steady rest SMW SR5 (45-310 mmØ) We offer a complete set of HSK63 holders Expert valuation available for inspection Year of production 2018 Power 59kW Dimensions with chip conveyor (lxwxh): 6500x3950x3760 Weight 23000kg

Condition: used, TECHNICAL DETAILS - Number of axes : 10 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 25,4 [mm] - Max. machining length : 200 [mm] - Spindle speeds : 10.000 [rpm] - C axis indexing precision : 0,1 [°] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 10.000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0,1 [°] - Number of guide bush holders : 2 GUIDE BUSH HOLDER 1 - Number of positions : 5 GUIDE BUSH HOLDER 2 - Number of positions : 5 - Number of motorized positions : 4 - Live tools speed : 8.000 [rpm] END ATTACHMENT - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 6.000 [rpm] SECONDARY OPERATION - Number of positions : 7 - Number of motorized positions : 3 - Live tools speed : 8.000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 13 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.270 x 1.650 [mm] - Machine height : 2.200 [mm] - Machine weight : 3.500 [kg] EQUIPMENT - CNC : Fanuc PNC DECO Delnevfhmwo Tlkujcg - Rotating tool motor on : S2, S3, S5 vertical + horizontal - Rotating guide bush - Parts catcher - Chips conveyor - Coolant tank - Bar loader : IEMCA MINI BOSS 325CNC/32

Condition: used, Year of construction: 2004, Functionality: fully functional, total length: 900 mm, Mondial Gallic conventional lathe. Has been in a school. Little used. Slide in good condition. 3 x 220 v 900 mm between the centers. Hole is 40 mm thick. Can be loaded. Video on request via whatsapp. Dceln Tjv E R D Eelkujg Chuck + quick chisel holder included. Pick up Brecht 2960 in Belgium.

Condition: used, Year of construction: 2018, WAGNER WDST 780 x 1200 CNC lathe, No. 1836322, built in 2018, 12-station tool turret, chip conveyor, SIEMENS Sinumerik 828D control system, weight approx. 6,600 kg Dsln Tlswczk Ajkuscg

Condition: good (used), Functionality: fully functional, turning height: 2,300 mm, workpiece weight (max.): 15,000 kg, turning diameter: 2,700 mm, faceplate diameter: 2,500 mm, rotational speed (max.): 110 rpm, rotational speed (min.): 2 rpm, power of the servo motor: 75,000 W, Titan SC 27 Vertical Lathe with: - 4-jaw manual chuck diameter 2500 mm - maximum load allowed in the chuck 15000 kg Dcsln Tswc R Aujlkueg - maximum turning diameter 2700 mm - maximum turning height 2300 mm - ICEM CNC Free extension in 12/24 months

Condition: good (used), Parallel Lathe GEMA LZ 160 Between points: 1000 mm Maxi Ø on bench: 310 mm Maxi Ø over saddle: 180 mm Maxi diameter in brocken bed: Ø 420 mm x Length 200 mm Spindle diameterØ 44 mm Spindle speed: from 48 to 1500 RPM Doljmqkh Een Tlkuocg TRIPAN Turret Supplied with 2 tool holders 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock: CM3 Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2100 x 800 x 1300 mm Weight: approx 1,3 T

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 20 [mm] - Max. machining length : 210 [mm] - Spindle speeds : 12000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 12000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.001 [°] - Number of guide bush holders : 2 GUIDE BUSH HOLDER 1 - Number of positions : 8 - Number of motorized positions : 3 - Live tools speed : 8000 [rpm] GUIDE BUSH HOLDER 2 - Number of positions : 5 - Number of motorized positions : 2 END ATTACHMENT - Number of positions : 11 SECONDARY OPERATION Deln Tsuhbdpelkuecg - Number of positions : 16 - Number of motorized positions : 4 - Live tools speed : 8000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] MACHINE HOURS - Number of hours under power : 84207 [h] EQUIPMENT - CNC : Fanuc 32i-model B - Rotating tool motor on : S11,S21,S51 - Rotating guide bush - Parts catcher - Parts conveying strip - Ejection of workpiece - Chips conveyor : MAYFRAN - Coolant tank * with high-pressure pump : 20 [bars] - Bar loader : TORNOS SBF320E - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer

Condition: used, Year of construction: 2011, WAGNER WDS 480 CNC lathe, No. TG 06067, built in 2011, 8-station tool turret, chip conveyor, SIEMENS Sinumerik 828D control system Dcjln Tljwczkcskuog

Condition: excellent (used), Parallel Lathe WEILER type PRIMUS Between points: 400 mm Maxi Ø on bench: 250 mm Maxi Ø over saddle: 130 mm Spindle Ø 24 mm Turret Multifix type A 3-jaws chuck Ø 155 mm Threadings Metric + Whitworth Dcoljvv Urnon Tlkusg Tailstock CM2 Scale HEIDENHAIN ND522 Feeds: auto 2 axes New electrical panel Delivered with: 1 4-jaws chuck Ø 155 mm, 4 tool holders, 1 drill chuck Voltage: 380 V Dimensions (L x W x H): 1300 x 900 x 1900 mm Weight: approx 500 kg Machine in VERY GOOD CONDITION

Condition: used, Year of construction: 2011, WAGNER WDS 480 CNC lathe, No. TG 06064, built in 2011, 8-station tool turret, chip conveyor, SIEMENS Sinumerik 828D control system Djln Tlkjwczi Seuecg

Condition: good (used), Parallel Lathe MULLER & PESANT Between points: 2500 mm Maxi Ø on bench: 520 mm Maxi Ø over saddle: 280 mm Maxi diameter in brocken bed: 700 mm Spindle diameter: Ø 56 mm Spindle speed: from 12,5 to 1000 RPM TRIPAN Turret 3-jaws chuck Ø 250 mm Tailstock CM4 Auto feeds longitudinal + transversal Dcolnevzw Ddo Tlkueg Lubricant pump Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1600 mm Weight: approx 3,5 T

Condition: used, Year of construction: 2012, CNC lathe MTRent/MTCut T20MC (FCL-200MC), No. A2120101, built in 2012, 12-station tool turret, chip conveyor, SIEMENS Sinumerik 828D control system Delnswczils Tlkuscg

Condition: used, Parallel Lathe CAZENEUVE HB 725 Between points: 1500 mm Maxi Ø on bench: 725 mm Maxi Ø over saddle: 400 mm Spindle diameter: Ø 80 mm Rotation: from 16 to 1250 RPM Square turret 4-jaws chuck Ø 450 mm Spindle motor power: 13,2 kW Threadings: Metric + Whitworth Tailstock: CM6 Rapid advances Supplied with some sets of hard and soft jaws + one 3 points steady max Ø 250 mm Lubricant tank Lubricant pump Voltage: 220 V Tri Deljv Syqbsn Tlkuocg Length: 3200 mm Depth with tank: 1600 mm Height: 1800 mm Weight: approx 4,5 T

Condition: used, Year of construction: 2012, CNC lathe MTRent/MTCut T20MC (FCL-200MC), No. A2120301, built in 2012, 12-station tool turret, chip conveyor, SIEMENS Sinumerik 828D control system Dceln Tlkewczhnsueg

Condition: good (used), Parallel Lathe WMW NILES type DLZ 500 IV L 1000 Between points: 1000 mm Maxi Ø on bench: 500 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 50 mm Spindle speed: from 28 to 1400 RPM 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock CM4 Auto Feeds transverse + longitudinal + rapid Lubricant pump Voltage: 380 V Dcjleqqkw Den Tlkusg Dimensions (L x W x H): 3000 x 1400 x 1500 mm Weight: approx 2,5 T

Condition: used, Year of construction: 2015, CNC lathe MTRent/MTCut T25FY, No. M0150504, built in 2015, 12-station tool turret, chip conveyor, SIEMENS Sinumerik 828D control system Dolnewczfye Tlkujcg

Condition: used, Year of construction: 2008, WAGNER DCD 250C x 1,500 lathe, No. G1311, built in 2008, center distance 1,500 mm, with SINO SDS6-3V XYZ control Dcoln Tlkewczfmoujg

Condition: used, TOS Sui 50-1500 lathe, No. 150150900039, center distance approx. 1,500 mm, weight 2,820 kg, with various lathe chucks Dcoln Tjwczd Nelkusg

Condition: used, Year of construction: 1999, STANKO Samat 400M lathe, No. 9990, built in 1999, center distance approx. 700 mm Deln Tjwczdielkuocg

Condition: used, Year of construction: 2020, WAGNER WDST 600x600 CNC lathe, No. 2027117, built in 2020, 12-station tool turret, chip conveyor, SIEMENS Sinumerik 828D control system, weight approx. 4,500 kg Dcsln Tlkowczc Seuog

Condition: used, Year of construction: 2021, COLCHESTER Tornado A90 CNC automatic lathe, No. T90241, built in 2001, max. 6,000 rpm, 12-station tool turret, FANUC 21i-T control, with COLCHESTER Tornado MBF 1000 bar loader Dcjlewczcron Tlkujg