Condition: good (used), Year of construction: 2004, 1x Arburg 820S 4000-2100 Ma-No. 195746 Year of construction: 10/2004 Core pulls: 2x Auger: 80mm incl. Multilift and safety fence Cgo Ia Sswfr Dxs Hu Sot

Condition: used, Year of construction: 2008, operating hours: 37,200 h, clamping force: 160 kN, screw diameter: 40 mm, displacement volume: 251 cm³, injection pressure: 2,500 bar, overall weight: 8,200 kg, terms of delivery: FCA Pegnitz delivery time: on request Cgo Iewd Udlja S Hu Set terms of payment: 100% prior to delivery

Condition: excellent (used), Year of construction: 2006, Technical Specifications Year of manufacture: 2006 Clamping side Clamping force: 8000 kN Maximum clamping platen: 1520 mm Clearance between tie bars: 1170 mm Min. installation height: 700 mm Max. installation height: 1300 mm Max. distance between platens: 2300 mm Opening stroke/max. installation height: 1000 mm Ejector stroke: 300 mm 1st injection side Screw diameter: 105 mm Displacement: 4160 cc 2nd injection side Screw diameter: 90 mm Displacement: 3050 cc Technical Specifications Clamping side Clamping force: 8000 kN Maximum clamping platen: 1520 mm Clearance between tie bars: 1170 mm Min. installation height: 700 mm Installation height Max.: 1300 mm Max. platen spacing: 2300 mm Max. opening stroke/installation height: 1000 mm Ejector stroke: 300 mm Cgj Ia Sewdxd Aj Hu Set 1st injection side Screw diameter: 105 mm Displacement: 4160 cc 2nd injection side Screw diameter: 90 mm Displacement: 3050 cc

Condition: good (used), Year of construction: 1998, operating hours: 65,000 h, clamping force: 3,300 kN, screw diameter: 70 mm, clearance between the columns: 710 mm, displacement volume: 1,039 cm³, injection pressure: 1,400 bar, injection weight: 940 g, DEMAG ERGOTECH 330 T injection molding machine in good condition Reference: Ergotech E330-1450-NC4S Year: 1998 65,000 operating hours Screw diameter: 70 mm L/D ratio: 20 Injectable volume: 1039 cm3 Injectable weight in PS: 940 g Injection pressure: 1400 bar Maximum dosing stroke: 270 mm Heating power: 27 kW Plate dimensions: 1040 x 950 mm Distance between columns: 710 x 630 mm Mold thickness: 330 - 710 mm Maximum opening stroke: 675 mm Cgo Ia S Hujwcq A Us Sot + SEPRO robot type 3031 YN MPA II X axis: 2500 mm Y axis: 800 mm Z axis: 1400 mm Machine dimensions: 6.50 x 2.00 x 2.30 m Machine weight: 14,300 kg

Condition: good (used), Year of construction: 2013, clamping force: 80 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 1,065 bar, installation height: 250 mm, total length: 4,200 mm, total width: 1,400 mm, total height: 2,000 mm, overall weight: 5,200 kg, Core features 2 Cgs Iswf I E Ssa S Hu Sst

Year of construction: 1999, Condition: ready for operation (used), General Data Machine weight 61900 kg This DEMAG Ergotech 10000-8000 was manufactured in 1999. It is a hydraulic injection moulding machine, ideal for precision and efficiency in plastic processing tasks. Consider the opportunity to buy this DEMAG Ergotech 10000-8000 hydraulic injection moulding machine. Contact us for more information. Cgs Iaswchxae S Hu Sot Application Types Injection Moulding

Year of construction: 2008, Condition: ready for operation (used), Clamping force: 800kN, tie bar spacing X/Y: 420mm/420mm, platen dimensions X/Y: 580mm/590mm, opening stroke: 450mm, min. mold installation height: 250mm, max. mold weight: 650kg, ejector stroke: 125mm, ejector force: 45kN. Screw diameter: 35mm, shot weight: 168g, dosing volume: 185cm³, injection pressure: 1800bar, plasticizing capacity: 15g/s. Control system: NC5, robot interface: Euromap 67, machine weight: approx. 4100kg, machine dimensions X/Y/Z: 4100mm/1400mm/1900mm, operating hours: approx. 73500h. Documentation available. On-site inspection is possible. Cge Iswgczkja S Hu Sjt

Condition: used, Year of construction: 2013, operating hours: 26,000 h, clamping force: 50 kN, screw diameter: 25 mm, displacement volume: 59 cm³, injection pressure: 2,500 bar, overall weight: 3,700 kg, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Manufacturer: Krauss Maffei Type: KM50-180AX Condition: aus laufender Produktion Co Ia S Huoppigde Ssgt Operating hours: ca. 26.000 CLAMPING UNIT: - Clamping force: 50 t Öffnungsweg: 300 mm Mould installation height min.: 150 mm Mould installation height max.: 470 mm Tie bar distance (h x v): 410 x 360 mm Plate dimension (h x v): 510 x 460 mm Centering (fix- movingplate): 125 mm INJECTION UNIT: IU180 Screw diameter: 25 mm Injection weight in polystyrol: 54 g Stroke volume: 59 cm³ Einspritzdruck: 2.500 bar CONTROL: MC5 Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 2 x (Hydr. Kernzug-Aggregat) Air valves: 2 Hot runner control devices: 6 Robot interface: Euromap 67 Other equipment: Qualitätsüberwachungspacket GENERAL DATA: - Installed heating capacity: 8,1 kW Pump drive power: entfällt Total installed power: Motor + Heizung Total weight: 3.700 kg Total size L x B x H: 4,4 x 1,6 x 1,9 m

Condition: excellent (used), Year of construction: 2007, operating hours: 59,000 h, Technical Specifications Year of manufacture: 2007 Clamping side Clamping force: 13,000 kN Opening stroke/max. installation height: 2,300 mm Max. distance between clamping platens: 4,000 mm Min./max. mold installation height: 1,000 - 1,700 mm Max. clamping platen height: 1,910 mm Min. mold size: 1,020 x 820 mm Clearance between tie bars: 1,500 mm Nozzle radius: R40 mm Mold weight: 29,000 kg Ejector stroke: 350 mm Cgj Ia S Hjwdw E Sou Sot 1st injection side Screw diameter: 120 mm Displacement: 6,786 cc 2nd injection side Screw diameter: 105 mm Displacement: 5,195 cc NC5 control system Core pulls AWS/DS: 1/1

Condition: like new (used), Year of construction: 2024, Functionality: fully functional, machine/vehicle number: 4450000410, clamping force: 500 kN, screw diameter: 32 mm, column diameter: 45 mm, displacement volume: 95 cm³, injection pressure: 1,076 bar, injection weight: 69 g, mold height (min.): 250 mm, overall weight: 2,430 kg, power: 16.8 kW (22.84 HP), Equipment: documentation/manual, Dr.Boy LSR (silicone) injection molding machine, built in 2024, is being sold unused due to project cancellation. Cge Iasv R Ia Ie S Hu Sjt Equipment Evacuation Interface for brush control Interface for handling device (EUROMAP 67)

Condition: excellent (used), Year of construction: 2010, 1,0 St. gebr. Spritzgießmaschine mit Roboter Hersteller: KRAUSS MAFFEI Typ: CX250-1000 Baujahr: 2010 Cgs Ia S Hujwcb Nro Sst Schließkraft 300 Tonnen Holmabsta 630 x 630 mm Einbauhöhe min.: 330 mm Öffnungsweg: 820 mm Schnecken DN: 50 mm Max. Hubvolumen: 432 cm³ Spritzteilgewicht: 393 g/PS Steuerung: MC5 Ausstattung: Roboter, Krauss Maffei, Typ: LRX100S 2 St. Kernzüge an BWAP Hochverschleißfeste Spritzeinheit

Condition: ready for operation (used), Year of construction: 2019, operating hours: 20,000 h, General Data Machine weight 6500 kg Control Unit Brand ENGEL Main Drive Spindle motor power 92 kW Injection Unit Screw diameter 60 mm Stroke volume 315 mm Injection pressure 2400 bar Screw speed 220 min-1 Cge Ia Sjwchw Aj Hu Sjt Nozzle pressure 2400 bar Clamping Unit Clamping force 6500 kN Opening stroke 1400 mm Distance between bars 1100x960 mm Mould height min 350 mm Mould height max 850 mm Size of mold platens 1510x1440 mm Ejector stroke 250 mm Ejector force for / back 95 kN Additional Equipment Oil Reservoir Capacity - Injection Unit: 500 l Maximum Cooling Power (32°C Water Inlet): 29.40 kWcool Water Consumption (32°C): 4.80 m3/h General Data Machine weight 6500 kg Control Unit Brand ENGEL Main Drive Spindle motor power 92 kW Injection Unit Screw diameter 60 mm Stroke volume 315 mm Injection pressure 2400 bar Screw speed 220 min-1 Nozzle pressure 2400 bar Clamping Unit Clamping force 6500 kN Opening stroke 1400 mm Distance between bars 1100x960 mm Mould height min 350 mm Mould height max 850 mm Size of mold platens 1510x1440 mm Ejector stroke 250 mm Ejector force for / back 95 kN Additional Equipment Oil Reservoir Capacity - Injection Unit: 500 l Maximum Cooling Power (32°C Water Inlet): 29.40 kWcool Water Consumption (32°C): 4.80 m3/h This Engel duo 2400/650 electrical injection moulding machine was manufactured in 2019. It features a screw diameter of 60/70/80 mm, a screw stroke of 315 mm, and a maximum injection capacity of 890 cm³. The clamping force reaches up to 6500 kN with a maximum mold weight of 11000 kg. Consider the opportunity to buy this Engel duo 2400/650 electrical injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding

Year of construction: 2008, Condition: ready for operation (used), Clamping force: 1600kN, opening stroke: 500mm, mold installation height min./max.: 275mm/585mm, max. platen distance: 1085mm, platen dimensions X/Y: 770mm/770mm, tie bar dimensions X/Y: 520mm/520mm, ejector stroke: 160mm. Screw diameter: 40mm, screw stroke: 203mm, injection weight: 160g. Documentation available. On-site inspection is possible. Cs Ia S Hewgczwou Sogt

Condition: refurbished (used), Year of construction: 2009, Equipment: documentation/manual, Sumitomo Demag IntElect 160/520-1000 NC 5 Year of manufacture: 2009 Control / Programming: NC 5 Screw: 50 mm Injection volume: 442 cc / 393 g Clamping force 1600 kN Tiebar spacing 520 mm x 520 mm Mold height min 275 mm – 585 mm Plate spacing max. 1080 mm Mold opening stroke 495 mm Ejector stroke 120 mm Core pull 2x Plug ejector plate safeguarding Equipment: 2-circuit core pull in series with mold movement (1x fixed platen + 1x movable platen) Ejector parallel to mold movement Clamping force controlled Freely programmable inputs and outputs (4 inputs/4 outputs) Ce Ia Sowd Afko Hu Ssgt (for 5/2-way pneumatic valve) Switch-on/shutdown program (with spraying) Interface for Handling, Euromap 67 (50-pin) Interface for mold protection (ejector plate protection) Integrated hot runner control, 2 zones Mold protection Intruding Plug combination for electrical connection, Change journal, PDE control, graphic MWE1 + MWE2 graphic

Condition: reconditioned (used), Year of construction: 2004, operating hours: 35,000 h, Functionality: fully functional, clamping force: 2,600 kN, screw diameter: 60 mm, Engel Victory 1800/260 Tech Engel Horizontal Injection Molding Machine, 260 tons of closing force. Servo motor. CC100 control. Only 35,000 operating hours. Extras: Engel ERC 53/1-E robot + safety grille. 60mm intermediate plate. The injection molding machine is delivered reconditioned by our expert technical team and in optimal working condition. We can offer our clients a commissioning service at their facilities, guaranteeing its operation. Technical Details Ce Ia S Huswdvm Uo Sjgt INJECTION PRESSURE 2361 (increased) PLATE DIMENSIONS 1100x1000mm SCREW 60mm INJECTION VOLUME 764cm3 CLAMPING POWER 2600kN OPENING STROKE 908mm WORKING HOURS 35,000 MINIMUM MOLD THICKNESS min 400/ max 900 YEAR OF MANUFACTURE 2004 MAXIMUM DISTANCE BETWEEN PLATES 1300mm

Condition: good (used), Year of construction: 1998, Screw diameter 25 mm Ce Iaevxh Iue S Hu Sjgt Closing force 25 ton Opening stroke 350 mm Weight 2,900 kg

Condition: excellent (used), Year of construction: 2014, operating hours: 14,500 h, Functionality: fully functional, 1,0 St. gebr. Vertikal Spritzgießmaschine Hersteller: ARBURG Typ: 375V500-100 Drehtisch Baujahr: 2014 Cgs Ia S Howca T Neu Set Schließkraft: 50 Tonnen Schnecken DN: 25 mm Max. Hubvolumen: 59 cm³ Steuerung: SELGOCIA Ausstattung: Drehtisch zweiteilig Durchmesser 1.000 mm

Condition: ready for operation (used), Year of construction: 2008, General Data Machine weight 8200 Injection Unit Cgj Ia S Huovzc Axe Sjt Screw diameter 50 mm Clamping Unit Clamping force 2000 This DEMAG Extra 200-840 hydraulic injection moulding machine was manufactured in 2008. Ideal for precision plastic processing, it offers robust functionality and reliability. Contact us for more information. Application Types Injection Moulding

Year of construction: 2000, Condition: ready for operation (used), Clamping force: 500kN, platen dimensions X/Y: 540mm/540mm, tie bar spacing: 355mm/355mm, opening stroke: 400mm, min. mold installation height: 210mm, clearance: 610mm, ejector stroke: 125mm. Screw diameter: 30mm, L-D ratio: 20, stroke volume: 144.3cm³, injection weight: 128g, injection pressure: 1890bar. Machine dimensions X/Y/Z: approx. 3650mm/1150mm/1800mm, weight: approx. 2500kg, control: NC4, operating hours: approx. 41100h. Documentation available. On-site inspection is possible. Co Ia S Hujwgczdo Segt

Year of construction: 1984, Condition: used, Plastic injection molding machine allrounder 170-90-200 horizontal and vertical swiveling Ce Ia S Hemmbz Hju Segt Clamping force 200 KN Injection force 91 KN Total power 10,9 kw

Condition: excellent (used), Year of construction: 2015, operating hours: 31,000 h, ENGEL victory 2050H/650V/350 Combi Year of construction: 2015 Control unit type: Engel CC 300 Operating hours: 31000 h 1st injection unit Screw diameter: 70 mm Max. Stroke volume: 1155 ccm Specific injection pressure: 1480 bar 2nd injection unit Screw diameter: 50 mm Max. Stroke volume: 392 ccm Specific injection pressure: 1280 bar Clamping unit Clamping force: 3500 kN Opening stroke: 1640 mm Mold installation height min. : 550 mm Max. platen distance: 1650 mm Clamping platens: 1200 x 1100 mm Cs Ia S Huswc Rxis Segt Accessories: Robot Viper 40 RC 300 Core pull ejector side 2 x Core puller nozzle side 2 x Air core pull 2 x Mold heating 24 x Cascade control 8 compartments Robot Engel Viper 40 RC 300 Z - axis : 3320 mm X - axis : 1200 mm Y - axis : 1500 mm B - axis : Servo + 90° - 180 ° C - axis : air 0 - 90°

Condition: excellent (used), Year of construction: 2008, Wittmann-Battenfeld HC 400/2250 S Year of construction 2008 Unilog B6 control system Cj Ia S Hjwb U S Rsu Ssgt Operating hours: approx. / (pump) Screw diameter 65 mm Fuel weight: approx. 980gr/hp Distance between tie bars 900 x 710mm Extras: Core pull Handling interface Battery incl. Battenfeld Handling R10 Machine weight: 20.000kg Machine is free! Subject to alterations, prior sale and errors excepted!

Condition: excellent (used), Year of construction: 2018, operating hours: 20,500 h, Functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit SECHS ACHS Roboter Hersteller: ARBURG Cge Isu E Id Tja S Hu Sst Typ: 570S2200-400/170 Baujahr: 2018 Schließkraft: 220 Tonnen Holmabstand 570 x 570 mm Einbauhöhe min. /max.: 350 mm Öffnungsweg: 1.000 mm Schnecken DN 1: 40 mm Max. Hubvolumen: 201 cm³ Spritzteilgewicht: 184 g/PS Schnecken DN 2: 25 mm Hubvolumen: 59 cm³ Spritzteilgewicht: 54 g/PS Steuerung: SELGOCIA Ausstattung: 3 x Kernzüge Vertikale Spritzeinheit Verlängerte Holme Vorverlegter Zylinder 6 - ACHS Roboter, Hersteller: KUKA, Typ: KR 16 Wikut, Baujahr: 2018 Förderband Schutzzaun

Condition: ready for operation (used), Year of construction: 2001, General Data Machine weight 16000 kg Clamping Unit Clamping force 3200 kN Additional Equipment International Dimension: 3200H-1636 This FERROMATIK K-TEC 320 S was manufactured in 2001. A robust hydraulic injection moulding machine, it's ideal for precision plastic processing. Consider the opportunity to buy this FERROMATIK K-TEC 320 S hydraulic injection moulding machine. Contact us for more information. Cgo Ijwbwz Iea S Hu Sjt Application Types Injection Moulding

Year of construction: 2007, Condition: ready for operation (used), Clamping force: 500kN, tie bar distance X/Y: 370mm/370mm, platen dimensions X/Y: 540mm/530mm, opening stroke: 400mm, min. mold height: 135mm, clearance: 535mm, ejector stroke: 125mm. Screw diameter: 30mm, injection volume: missing (please add), injection pressure: 1890bar, core pulls: 2. Machine dimensions X/Y/Z: approx. 3600mm/1200mm/1800mm, weight: approx. 2500kg, operating hours: 80300h. Documentation available. On-site inspection is possible. Cge Iajwgczqo S Hu Sjt